NOTE For spare parts
NOTE For spare parts orders as well as for technical support, please supply the information provided on the identification plate. Also a identification plate will be mounted on the bottom of the hand pump. It will contain important information used to identify the hand pump. 2.5 Technical Data Hand pump PGC 2506 Unit Output Low Pressure (22 bar / 319 PSI) 7.2 cm³/Hub Output High Pressure (320 bar / 4’640 PSI) 0.9 cm³/Hub Tank 700 cm³ Working pressure PG 6 IN / OUT 65 bar Working pressure PG 10 IN / OUT 160 bar Working pressure PG 15 IN / OUT 235 bar Working pressure PG 25 IN / OUT 315 bar operating pressure 352 bar Max. hydraulic pressure 352 +40/-10 bar Weight of clamping device 12.1 kg Weight of stand 3.5 kg Weight of hand pump incl. hydraulic hose and oil 4.3 kg Weight of APC 25 clamping inserts 0.44 kg Weight of APC 15 clamping inserts 0.60 kg Weight of APC 10 clamping inserts 0.80 kg Weight of APC 06 clamping inserts 0.90 kg Weight of Set PGC 2506 complete (including one size of clamping inserts) 22.0 kg Min. dimension working space L x W x H 100 x 70 x 40 cm Working temperature 0...+ 40 °C 68 Operating manual PGC 2506
2.6 Scope of Supply (Set Manual Clamping unit PGC 2506 / Part. No. 7621.25069) Clamping device PGC 2506 // 1 powRgrip ® compact PGC 2506 // 1 Operating manual in German/English // 1 Allen wrench SW 4 for air release screw // 1 Screwdrivers for slotted screws size 1.0 Hand pump // 1 hand pump 352 bar incl. hydraulic oil Stand // Stand with mounting brackets Clamping inserts APC 6 to APC 25 (to be ordered separately!) // 1 Set Clamping inserts APC // 1 taper cleaner TKCP including CPS 3. Packaging and Transport 3.1 Packaging The components of the unit are packed separately. The packaging material consists mainly of cardboard and plastic and is an integral part of the shipment. The packaging may not be subjected to additional stress beyond carrying its contents. The packaging as well as its contents should be protected against any influences of humidity. The transport as well as the storage temperature must be –20°C to + 40°C / -4° to +104°F. 3.2 Transportation Damage If transport damage is found when inspecting the unit, the following procedure should be adopted: // To Accept under protest, make a note on the delivery document // Notify delivery service (forwarder, railway etc.) // Prepare damage report // Inform manufacturer 3.3 Storage The storage of the unit in an excessively moist surrounding or outdoors can lead to corrosion damage or other damages for which we can accept no liability. The transport- as well as the storage temperature of –20°C to +40°C must be kept. 4. Unit Installation All rules and regulations valid for the unit itself must be observed and respected. The place of installation should be inspected prior to installation to be able to ensure the operation for the personnel as well as for the unit itself. The unit must be placed and set in a way that a safe and continuous operation is guaranteed. Operating manual PGC 2506 69
