27.02.2015 Views

Exhaust Emission Data Sheet 35GGFD - Cummins Power Generation

Exhaust Emission Data Sheet 35GGFD - Cummins Power Generation

Exhaust Emission Data Sheet 35GGFD - Cummins Power Generation

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Exhaust</strong> <strong>Emission</strong> <strong>Data</strong> <strong>Sheet</strong><br />

<strong>35GGFD</strong><br />

60 Hz Generator Set<br />

Engine Information:<br />

Model: Ford ESG-642 Bore: 3.81 in. (97 mm)<br />

Type: 4 Cycle, V 6 Cylinder Spark-Ignited Stroke: 3.74 in. (95 mm)<br />

Aspiration: Natural Displacement: 256 cu. in. (4.2 liters)<br />

Compression Ratio: 9.3:1<br />

<strong>Emission</strong> Control Device: None<br />

Natural Gas<br />

Propane<br />

PERFORMANCE DATA Standby Prime Standby Prime<br />

Genset Rating (kw) @ 60 Hz 35 30 35 30<br />

BHP @ 1800 RPM (60 Hz) 57 48 57 48<br />

Fuel Consumption (SCFH) 494 436 191 172<br />

Air to Fuel Ratio 17.7:1 17.7:1 15.7:1 15.7:1<br />

<strong>Exhaust</strong> Gas Flow (CFM) 268 234 247 216<br />

<strong>Exhaust</strong> Gas Temperature (°F) 1028 981 1028 979<br />

EXHAUST EMISSION DATA<br />

HC (Total Unburned Hydrocarbons) 0.6 0.6 0.6 0.6<br />

NOx (Oxides of Nitrogen as NO2) 13.7 12.7 13.9 13.8<br />

CO (Carbon Monoxide) 2.5 7.4 10.1 9.0<br />

PM10 (Particular Matter) Negligible Negligible Negligible Negligible<br />

All values are Grams per HP-Hour<br />

TEST CONDITIONS<br />

<strong>Data</strong> was recorded during steady-state rated engine speed (± 25 RPM) with full load (±2%). Pressures, temperatures,<br />

and emission rates were stabilized.<br />

Fuel Specification:<br />

Natural Gas:<br />

Propane:<br />

Fuel Temperature:<br />

Fuel Pressure:<br />

Intake Air Temperature:<br />

Barometric Pressure:<br />

Dry processed natural gas with 905 BTU per standard cubic foot LHV<br />

Meets the requirements for Commercial Grade Propane under the ASTM D1835 Standard<br />

Specification for Liquefied Gases<br />

60 ± 9 °F at Flow Transmitter<br />

14.73 PSIA ± 0.5 PSIA at Flow Transmitter<br />

77 ± 9 °F at inlet<br />

29.92 in. Hg ± 1 in. Hg<br />

All emission data is a calculated average of engines tested under the conditions shown above. These data are subjected to instrumentation and<br />

engine-to-engine variability. Field emission test data are not guaranteed to these levels. Actual field test results may vary due to test site conditions,<br />

installation, fuel specification, test procedures and instrumentation. Engine operation with excessive air intake or exhaust restriction beyond published<br />

maximum limits, or with improper maintenance, may results in elevated emission levels.<br />

<strong>Cummins</strong> <strong>Power</strong> <strong>Generation</strong> <strong>Data</strong> and Specifications Subject to Change Without Notice eds-324d

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!