Bruksanvisning & monteringsanvisning – Manöverpanel 3010 613 ...

INSTALLATION INSTRUCTIONS CONTROL PANEL 3010 613
Control panel 3010 613 is intended for the Alde Compact 3010 boiler.
������������������������������������������������������������������������������������������������������������������������
located on an outer wall or close to objects which radiate heat, for example, CD players, refrigerator and lamps, as this
can give incorrect temperature. The area behind the panel should be well ventilated. If the room temperature on the
panel is affected nevertheless, an external sensor should be connected to the panel.
����������������������������������������������������������������������������������������������������������������������
avoid wear on the terminal strip of the panel.
A.
CABLE CONNECTION BETWEEN BOILER COMPACT 3010 AND CONTROL
PANEL 3010 613
Connect accessories to the control panel as shown in the diagram below. N.B. Do not cramp 12 V cables or sensor
cables together with 230 V cables. It is preferable not to place the cables close to each other. If the cables are bundled,
the risk of shutdown increases.
���������������������
18
86 mm
Remote sensor, white (G)
Load monitor, green (E)
External start of boiler, yellow (D)
blue
External sensor, blue (F)
grey
6
7
8
9
10
97 mm
Change LPG cylinder (C)
Pump signal (B)
black
1
2
3
4
5
red
B.
9 mm
EXT
B
38,5 mm
BZI
+
C8
JP1
JP6
R30
+
red
C D E F (G) (H) I J
C.
R3(4x)
Battery Back-up (3V DC) (H)
C23
JP4
76 mm
73 mm
84 mm
Window breaker (I)
87 mm
Heating of reduction valve
(Eis Ex) (J)