skidsteer cold planer literature - Roadhog, Inc.

RoadHog planer applicationsCOLD PLANERSCP12LFCP16LFMilling prior to overlay Road base recycling Single pass cuts for utility installationRoadHog skidsteer planer specificationsModel Cutting width Cutting depth Tilt Sideshift # of teeth Min. flow / psi required Estimated weightCP12LF 12 0 to 5 inches +-15 degrees 26 inches 30 15/2,000 1,220 lbs.CP16LF 16 0 to 5 inches +-15 degrees 26 inches 38 15/2,000 1,250 lbs.CP16 16 0 to 6 inches +-15 degrees 26 inches 38 24/2,000 1,845 lbs.CP18 18 0 to 6 inches +-15 degrees 26 inches 40 24/2,000 1,860 lbs.CP24 24 0 to 6 inches +-13 degrees 26 inches 50 27/2,000 1,930 lbs.CP30 30 0 to 8 inches +-10 degrees 26 inches 60 30/2,000 2,770 lbs.CP40 40 0 to 8 inches +-8 degrees 26 inches 76 30/2,750 2,910 lbs.CP16CP18CP24CP30CP40RS10-2.5RS10-4.5RH1850RH2450RH4060RH3075RH4075RH40140RH48140RH60140RH48200RH60200RH72200RoadHog TM SeriesRH1850, RH2450, RH4060, RH3075, RH4075, RH40140, RH48140, RH60140, RH48200, RH60200, RH72200Self contained engine driven milling machines for wheel loaders, backhoes and skidsteers• Cut asphalt, utility trenches or reclaim road base• 50, 60, 75, 140 or 200hp tier 3 diesel engines• Hydraulic depth control allows accurate material removal• Cutting widths of 18, 24, 30, 40, 48, 60, or 72”• Tilt (slope) control for bevel cuts or matching grades• Sideshift for shoulder work or repositioning in traffi c• Remote control of engine and cutting drum position• On board water kit for dust control and longer tooth life• Avaliable for skidsteers, backhoes or wheel loadersSold and serviced by:Box 519 Brownsburg, In. 46112Box 519 Brownsburg, In. 46112Phone 317-858-7050 Fax 317-858-7053Phone 317-640-9975www.zanetispower.comwww.roadhog-inc.com5/11 6/08CP24 shown