Universal Input Digital Process Indicator IDU-210 - Lee-Dickens Ltd.

Universal Input Digital Process IndicatorIDU-210SPECIFICATIONSINPUTS:PROCESSDC Current0 to ±20mA into < 5 ohmsDC Voltage0 to ±100mV into > 10Mohm0 to ±10V into > 1MohmTEMPERATUREDisplayed in either ºC or ºFResolution: 1 or 0.1 ºC /ºFResistance Thermometers3 wire PT100Excitation: 0.25mARTD type Range CoveredPT100(alpha=385)-200 to 850ºC(alpha=392)-200 to 457ºCAccuracy including linearisation:±0.5ºC typically@25ºC±0.8ºC worst caseThermocoupleType J, K, N, R, S or TOpen curcuit sensor detection:Upscale driveType Range CoveredJ Fe/NiCu -210 to 1200ºCK NiCh/Ni/Al -270 to 1372ºCN Ncrsl/Nisil -200 to 1300ºCT Cu/CuNi -270 to 400ºCAccuracy including linearisation:±0.5ºC typically@25ºC±1.0ºC worst caseR Pt13%/RhPt -50 to 1767ºCS Pt10%RhPt -50 to 1767ºCAccuracy including linearisation:±1.2ºC typically@25ºC±2.0ºC worst caseDISPLAYS:Display4 digit high brightnessred LED’sOption:Green LED’sDigit Size14.2mmFull Scale Range–1999 to 9999Decimal PointProgrammable to anylocation in the range-1.999 to 9999Display Update2 updates per secondA/D ConverterDual slope integratingwith auto-zeroConversion Rate500mSSUPPLY:Power Supply VoltageUniversal mains power:90 to 265 Volt ACOption:Universal low voltage:10 to 32 Volt AC/DCPower Required7VA maximumTransducer/TransmitterExcitation Voltage:Transducer Supply10V dc at 35mA maxTransmitter SupplyUnregulated 24 Volt DC at35mA maxIsolation: 500 Volt DC or ACpeakOUTPUT:Alarm Relays OutputAlarm 1 standardAlarm 2 & 3 optionalAlarm 1 & 2- Changeovercontacts, Alarm 3 normallyopen contacts:rated at1 Amp at 250 Volt AC5 Amp at 30 Volt DCAnalogue Re-transmittingOutput4 to 20mA into 10 to 900 ohmsMaximum output: 22mATemperature drift: 70dB at 50/60 HzOperating/StorageTemperature/RH+10 to +50ºC/-10 to +70ºC0 to 95% RHnon-condensingProtection LevelFascia panel to IP65WeightMains or Low Voltage powered0.4 Kg (max) net0.55 Kg including handbook,labels and packaging.ID DIGITAL PROCESSINDICATOR RANGEMECHANICAL DETAILSDimensions (mm):48(H) x 96(W) x 100(D)Panel Cut-out (mm):44(H) x 92(W)ORDERING DETAILS(a) Give identification code, i.e. IDU-210(b) Give details of power supply, i.e. 90 to 265 Volt AC(c) Give details of input type and range, i.e. 0 to 100 mV(d) Give details of calibration, i.e. 0 to 150.0 psi(e) Specify if front panel pushbuttons required(f) Specify if Green LED display required(g)(h)Specify if alarm relays required and if so how many,i.e. 2 alarm relaysSpecify if analogue retransmitting output requiredLEE-DICKENS LTDDesborough, Kettering, Northants NN14 2QW U.K.Tel: (01536) 760156 Fax (01536) 7625528.8