Н А В И Д И П А Т Е Н Т Њ

Навиди патентӣ (65) Патентный вестник
покрытий на пластмассовые части,
детали.
Class 01 - unprocessed plastics,
artificial and synthetic resins, industrial
adhesives.
Class 06 - metallic tubes and pipes
covered with or sheathed with plastic,
in particular PTFE, FEP, PVDF or
PEEK; elbow pipes, bare or plasticcoated
metallic connectors for pipe
lines; fixed and wheeled bins and
containers of metal; signaling panels,
non-luminous and non-mechanical, of
metal.
Class 07 - metal moulds for moulding
of plastic material; parts and
components of plastic including
moulded plastic, for domestic
machines, industrial machines and
machine tools; valves and slide valves
as machine parts.
Class 08 - hand-operated tools and
instruments.
Class 09 - parts and components of
plastic, in particular moulded plastic,
for radio and television apparatus and
sets, for speaking machines, for
photographic, cinematographic, optical,
weighing, measuring, signalling,
control and teaching apparatus, for
calculating machines, for electrical and
electronic industry, laboratory containers
and utensils of plastic, including
PTFE, FEP, PFA, PEEK or PVDF;
signaling panels, luminous or
mechanical.
Class 11 - parts and components of
plastic in particular moulded plastic, for
household appliances and for lighting,
heating, steam generating, cooking,
refrigerating, drying, ventilating, water
supply and sanitary installations;
valves and valving of plastic, or
covered with plastic for industry.
Class 12 - parts and components of
plastic in particular moulded plastic, for
all vehicles including aircraft and
automobiles; fuel tanks for vehicles;
waste bin carrier trollies, wheeled
containers.
Class 16 - parts and components of
plastic in particular moulded plastic, for
typewriters, office machines; office
articles of plastic; waste bags made of
plastic.
Class 17 - semi-finished products,
sheets, plates, rods, sticks, tapes,
strips, cane, tubes, flexible hoses,
unlined pipes, couplings, bridles,
wedges, gasket seals, casings,
particularly for cables, all made of
plastic and of PTFE, FEP, PFA, PVDF,
or PEEK, braids and linings of PTFE,
FEP, PFA, PVDF or PEEK.
Class 19 - urban furniture, including
shelters, signalling panels and
advertising panels (not luminous or
mechanical), telephone boxes; pipes
for building; tubes and pipes; all these
goods being non-metallic.
Class 20 - tanks and containers for
industry, transport and industrial
handling, made of plastic.
Class 21 - small utensils and
receptacles of plastic, bins and
containers for waste, refuse or glass,
made of metal or plastic; waste paper
baskets.
Class 40 - processing of plastics, in
particular custom processing by
moulding, injection, extrusion, blowing,
foaming, calendering rotational
moulding; services of metallization,
painting or other coatings for plastic
parts.
(111) 9408
(181) 25.02.2021
(210) 11011177
(220) 25.02.2011
(151) 06.06.2011
(730) Соҳибкори инфиродӣ Mаҳмудов
Асрор Муҳаммедович (TJ)
Частный предприниматель Махмудов
Асрор Мухаммедович (TJ)
(540)
43