Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
GN 918.6<br />
Cam locking levers<br />
•Lever<br />
Matte shot-blasted AISI 303 stainless steel.<br />
•Cam and washer<br />
Tempered AISI 303 stainless steel chemically nickel-plated.<br />
•Ball knob (type KV)<br />
<strong>DIN</strong> 319 black Duroplast.<br />
Instructions<br />
Cam locking levers GN 918.6 are fitted with a rotating helix. They allow<br />
rapid and safe clamping and releasing with a relatively long movement and<br />
high clamping force. The small rising angle of the helix makes it self arresting.<br />
The ball handle is linked with the clamping mechanism via a serrated ratchet<br />
thus allowing an individual positioning of the hand lever. Bolt and washer are<br />
matched to allow an effortless release from the clamped position.<br />
The washer saves special requirements to the execution of the female thread<br />
and the clamping bolt can therefore also be used on T-Nuts on machine beds.<br />
Cam locking levers offer the advantage that they can be rotated away from<br />
the clamping area after release. Cam locking levers can also be used as stepless<br />
adjustable end stops. If the washer is removed the bolt can be clamped<br />
direct to its support. Spherical clamping bolts with flat faced ball GN 605 are<br />
recommended for use with these cam locking levers.<br />
9<br />
73<br />
Type KV<br />
Type SK<br />
Machine elements<br />
Standard elements<br />
Description<br />
Main dimensions Threaded stud Weight<br />
D H R d1 d2 h1 h2 s d l grams<br />
GN 918.6-50-KV<br />
GN 918.6-50-SK<br />
50 62 109 28 30 12<br />
34.5 -<br />
M10 11<br />
310<br />
24 19 154<br />
“ELESA” and “GANTERGRIFF” models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings.
Change language