FL155.500.01 FL155H.500.01 FL155SH.500.01 - IVD GmbH

ICAR S.P.A. - INDUSTRIA CONDENSATORI
Via Isonzo, 10 - 20052 MONZA (MI) - ITALY
Telefono +39 039 83951 - Fax +39 039 833227
www.icar.com - icar@icar.com
THREE-PHASE EMI FILTER FOR INDUSTRIAL APPLICATIONS
Metallic casing and resin filled, dry. Unprotected.
RATINGS, GENERAL CHARACTERIST. :
------------------------------ --------
Rated Voltage FL155 series 250/440 V
FL155H series 300/520 V
FL155SH series 400/700 V
Rated Current 500 A
Rated Frequency 50/60 Hz
T.S. N°: 5K 2971 REV.A
Date: 18.11.2011
Signature CG
Approval: DT DQ
Sheet 1 of 2
Overload capability 2 x In at switch on
1.5 x In for 1', once per day
Leakage current (@ 440 V ; 50 Hz) 10 mA *
Power loss (@ 25°C) 38 W
Reference Standard IEC/EN 60939
* Current value estimated under normal running condition.
If two phases are interrupted, leakage current could reach more times than the leakage current under normal running condition.
TEST DATA :
------------------------------ --------
DC Test between terminals, 2s 2500 V
DC Test between term./case, 2s 3500 V
ENVIROMENTAL CHARACTERISTICS :
------------------------------ --------
Climatic Category T min = - 25 °C T max = + 40 °C
Storage temperature Ts min = - 40 °C Ts max = + 85 °C
MECHANICAL CHARACTERISTICS :
------------------------------ --------
Case material Galvanized iron
Terminals Copper busbar (See drawing in sheet 2 of 2)
Approx weight 12 kg
TYPICAL FILTER ATTENUATION
------------------------------
TECHNICAL SPECIFICATION
FL155.500.01 FL155H.500.01 FL155SH.500.01
Common mode
Differential mode
Unsymmetrical, adjacent
branches 50 terminated
dB
80
70
60
50
40
30
20
10
0
10kHz 100kHz 1MHz 10MHz 100MHz