Standard Series Technical Catalogue, No other range is - Clipsal

clipsal.com 

technical techn 

data

page C O N T E N T S 

2 STANDARD SERIES INTRODUCTION 

4 HOW TO ORDER SECTION 

12 STANDARD SERIES COLOURS 

SWITCHES 

13 Standard Size Flush Switches 

14 Architrave & Miniature Architrave Size Flush Switches 

15 Intermediate & Large Format Size Flush Switches 

16 Flush Plates 

19 Dimmers & Fan Controllers 

21 Timer Controls 

23 Sunset Switches 

23 Switch Multipliers & Booster Element Relay 

24 Under Voltage Relays 

24 Key Tag & Key Operated Switches 

26 Ceiling & Foot Operated Switches 

29 Circuit Identifi cation Products & Mounting Accessories 

30 Cable Connection Accessories 

31 Protected Switches - Moulded and Zinc Diecast 

SOCKETS 

32 - 38 Various Socket Outlets 

39 Wilco & Clock Connection Accessories 

40 Switched Socket Outlets 

46 Safety, Cooker Socket & Plug and Universal Shaver Outlets 

47 TV Equipment 

50 Chemical Resistant Standard Industrial Range 

54 Protected Switched Socket Outlets - Zinc Diecast 

55 30 SERIES SWITCH MECHANISMS 

61 SCHEMATIC WIRING DIAGRAMS 

68 MOUNTING TEMPLATES 

69 STANDARD RANGE QUICK REFERENCE GUIDE 

81 FOLD OUT MOUNTING ACCESSORIES CROSS REFERENCE CHART

The Clipsal Standard Range 

of Flush Switches, Socket 

Outlets and Accessories has 

been a fi rm favourite for many 

years, and with good reason. 

With pure, uncluttered styling and 

timeless lines, Clipsal’s Standard Range 

has stood the test of time. 

These accessories make it easy to 

update or replace switches in the 

thousands of Australian homes built in 

the 1970s and 80s that already feature 

Standard Range products. 

Today’s Standard Range however, 

features a greater choice of economical 

fl ush switches, sockets and accessories 

than have ever been available before. 

Switches in all sizes from mini architrave 

to large format can be purchased 

either assembled or as plates 

only, along with printed 

mechanisms for 

specifi c functions. 

SETTING THE STANDARD

FOR OVER 30 YEARS 

Dimmers, fan controllers, time delays, 

surface, ceiling and other special 

purpose switches are all available in the 

Standard Range format. 

Socket outlets with features such 

as Surge Protection, RCD Protection, 

Timers and Dual Voltage also 

add to this range to provide for 

today’s requirements. 

Approvals and Certifi cation 

Where required, all Clipsal Standard 

Range products have been approved 

by The Department Of Energy, South 

Australia, and carry the 

Approval Mark S/1.

HOW TO ORDER SWITCHES 

4 

HOW TO ORDER SWITCHES 

Single/Multi Switch Mechanisms 

Clipsal Standard Range products use the 30 Series Switch 

Mechanism, which is a Trademark of Clipsal Australia Pty. 

Ltd. Standard Range switches are supplied in one, two, 

three, four, fi ve and six-gang formats, meaning that 

the gridplate remains the same size, however, a varying 

number of switch mechanisms may be used. 

Standard size switch dimensions are 

115mm (length) x 73mm (width) x 11mm (depth). 

Each range of switches and socket outlets have different 

prefi xes at the beginning of the Catalogue Number. 

The “3” prefi x indicates the product is a 

Standard Range Switch Product. 

One 

Gang 

Two 

Gang 

Three 

Gang 

3 1 VA 

For Standard Range switches 

that prefi x is ‘3’. For example, a 

vertically mounted single gang 

switch in Standard Range 

is 31VA. 

Four 

Gang 

This number indicates the number of switch mechanisms 

included in the product. Note that the size of the gridplate does 

not change, only the number of switch mechanisms is variable. 

Five 

Gang 

Six 

Gang 

31VA 32VA 33VA 34VA 35VA 36VA 

Horizontal or Vertical Formats 

Standard Range Catalogue Numbers will also vary 

depending on whether the switch is vertically or 

horizontally mounted. For example, 31VA is vertically 

mounted whereas 31HA is horizontally mounted. 

The ‘A’ in the catalogue number refers to the product 

being Assembled. 

One 

Gang 

Two 

Gang 

31V A The letter “V” indicates the product is 

Vertically Mounted. 

31H A The letter “H” indicates the product is 

Horizontally Mounted. 

Three 

Gang 

Four 

Gang 

31HA 31VA 32HA 32VA 33HA 33VA 34HA 

Architrave Switches 

Standard Range switches are also available 

in architrave sizes in one, two, three and 

four-gang formats. 

Each format has a different size gridplate. 

30 dimensions are 75mm (l) x 32mm (w) x 10mm (d). 

32A dimensions are 85mm (l) x 32mm (w) x 10mm (d). 



Note: Depth refers to the dimensions that 

switchplate protrudes off the wall surface. It does 

not include the amount the mechanism recesses 

into the wall. 

One 

Gang 

Two 

Gang 

Three 

Gang 

Width 

Four 

Gang 

30 32A 33A 34A 

Length 

Mounting Centres 

Depth

HOW TO ORDER SWITCHES (continued) 

Miniature Architrave Switches 

Miniature Architrave size switches are available in one, 

two and three gang formats. 

A ‘T’ in the Catalogue Number refers to “miniature” 

plate size. 

Each format has a different size gridplate. 

30T dimensions are 54mm (l) x 27mm (w) x 10mm (d). 

32TA dimensions are 75mm (l) x 27mm (w) x 10mm (d). 

33TA dimensions are 98mm (l) x 27mm (w) x 10mm (d). 

Intermediate Switches 

Intermediate switches are available in one and 

two-gang formats. 

A ‘B’ in the Catalogue Number refers to “intermediate” 

plate size. An ‘L’ in the Catalogue Number refers to the 

mounting centres being spaced further apart. 

The gridplate remains the same size for both formats. 

31BA & 32BA dimensions are 

95mm (l) x 48mm (w) x 11mm (d). 

31BLA & 32BLA dimensions are 

95mm (l) x 48mm (w) x 11mm (d). 

Large Format Switches 

Large Format switches are available from one to 

nine-gang formats. 

The gridplate remains the same size for all formats. 

Dimensions are 116mm (l) x 116mm (w) x 11mm (d) for 

all products. 

One 

Gang 

Two 

Gang 

Three 

Gang 

Four 

Gang 

One 

Gang 

Two 

Gang 

Three 

Gang 

30T 32TA 33TA 

One 

Gang 

Two 

Gang 

31BA 31BLA 32BA 32BLA 

Five 

Gang 

Six 

Gang 

31/2VA 32/2VA 33/2VA 34/2VA 35/2VA 36/2VA 

Seven 

Gang 

Eight 

Gang 

Nine 

Gang 

37/2VA 38/2VA 39/2VA 

31/2 VA The “/2” indicates the gridplate is larger than 

standard or approximately 50% wider. 

5 

HOW TO ORDER SWITCHES

HOW TO ORDER FLUSH PLATES 

6 


Standard Range switches can also be purchased with 

fl ush plate only (no switch mechanisms). Note “A” is 

not part of the catalogue number which means no 

mechanisms are “assembled” in the plate. 

Standard Size Flush Plates 

One Gang 

31VH 

Two Gang 

32VH 

Miniature Architrave Flush Plates 

One Gang 

31T 

Two Gang 

32T 

Architrave Flush Plates 

One Gang 

31 

Two Gang 

32 

Intermediate Flush Plates 

One Gang 

31B 

One Gang 

31BL 

Three Gang 

33VH 

Three Gang 

33T 

Three Gang 

33 

Two Gang 

32B 

See below for one-gang through to six-gang Catalogue 

Numbers (please note that the ‘VH’ part of the Catalogue 

Number means that mechanisms can be mounted either 

vertically or horizontally). 

Four Gang 

34VH 

Four Gang 

34 

Two Gang 

32BL 

Five Gang 

35VH 

Six Gang 

36VH


AND NON-STANDARD SWITCHES 

Large Format Flush Plates 

One Gang 

31/2VH 

Note depicts aperture is fi lled in. 

How To Order Non-Standard Switches 

Switches can also be ordered with features, including 

neon switch mechanisms and indicators, dimmers, fan 

controllers, timers, credit card operation, weatherproof 

versions and other variations. 

Message and Neon Indicator Mechanisms: 

Message mechanisms are available in an endless amount 

of confi gurations (see Pages 57-60 for more details). 

Neon indicator mechanisms include 30N-RED & 30N- 

COLOURS. 30/2NM is a switch mechanism with a neon 

indicator. Please note that fl ush plates must be purchased 

separately for these products. 

Sunset Switches 

Catologue number arrangement is formed as follows: 

31VSSR. 

‘31’ refers to Single Switch Plate 

‘V’ refers to Vertical orientation 

‘SS’ refers to Sunset Switch 

‘R’ refers to with Relay 

Light Dimmers: 

include 32E450L (C-Thru ® Leading Edge), 

32E450T (C-Thru ® Trailing Edge). 

Fan Speed Controller: 

is 32E500F. 

Two Gang 

32/2VH 

Seven Gang 

37/2VH 

Three Gang 

33/2VH 

Eight Gang 

38/2VH 

Four Gang 

34/2VH 

30LM 

31VSSR 

32E450L 

Nine Gang 

39/2VH 

Five Gang 

35/2VH 

Six Gang 

36/2VH 

30/2NM 30N-RED 

32E450T 

32E500F 

7 

HOW TO ORDER FLUSH PLATES & NON-STANDARD SWITCHES

HOW TO ORDER NON-STANDARD SWITCHES (CONTINUED) 

8 

HOW TO ORDER 

NON-STANDARD SWITCHES (CONTINUED) 

Timers - Electronic: 

include 31VETR, 31VETR3 & 31VETF (fans). 

‘ET’ refers to Electronic Timer. 

‘R’ refers to Relay (2 wire, no neutral required). 

‘R3’ refers to 3 Wire Relay (3 wire, neutral required). 

‘F’ refers to Fan. 

Timers - Pneumatic: 

include 319, 319RA, 319N, 319HP & 319X. 

All Pneumatic timer products are prefi xed with ‘319’. 

‘RA’ refers to a Reverse Action (operation). 

‘N’ means that the product includes a Neon. 

‘HP’ refers to the product being Hose Proof (weatherproof). 

‘X’ means that the product is supplied with an extra switch. 

NOTE: Analogue timers are also available, refer page 22. 

Key Tag Switches: 

include 36VKT3N, 36VKT3NX, 36VKT4, 36VKT4X. 

‘V’ refers to Vertical. 

‘KT’ refers to Key Tag. 

‘N’ refers to Neon. 

‘X’ refers to Extra Switch. 

Key Operated Switches: 

include 31VK1, 31VK1/2, 31VK2, 31VK2/2. 

‘K1’ refers to Key Operated ‘One Way’ Switch. 

‘K1/2’ refers to Key Operated ‘Two Way’ Switch. 

‘K2’ refers to Key Operated, Locking in both On/Off Positions. 

‘K2/2’ refers to Key Operated ‘Two Way’, Locking in both 

On/Off Positions. 

Common Keyed Switches: 

include 31VK1CK, 31VK1/2CK, 31VK2CK, 31VK2/2CK. 

‘CK’ - By adding “CK” to Key Operated Switches allows for ‘One 

Common Key’ to be used across all switches. 

IP54 Weatherproof Switch: 

is 31VHWP. 

‘WP’ refers to Weather Proof. 

31VETR & 

31VETR3 

OFF 

OFF 

ON 

ON 

31VHWP 

31VETF 

319 319N 

319HP 

36VKT3N & 36VKT4 36VKT3NX & 36VKT4X 

31VK1 31VK1/2 & 

31VK2/2 

31VK2 

31VK1CK 31VK1/2CK & 

31VK2/2CK 

31VK2CK 

OFF 

OFF 

ON 

ON

HOW TO ORDER TELEPHONE, DATA 

AND TV CONNECTION ACCESSORIES 

Telephone and Data Outlets 

The following accessory is available: 

One Gang Data Outlet 

31VRJ 

TV Antenna Connection Accessories 

The following accessories are available: 

TV Outlet Plate 

31VTVA 

Pay TV Socket 

marked ‘PAY TV’ 

31TVF 

Ordering Colours 

Coaxial TV Socket 

75 Ohm 

31VTV75 

Pay TV & FTA TV 

AC Isolation, Standard Plate 

32TVACFF 

When ordering switches, colour variations also have to 

be taken into consideration, as the Catalogue Number 

will change depending on the colour of the product. 

Each colour has its own ‘code’, for example, the code 

for White Electric is ‘WE’ and the code for Cream is 

‘CM’. The Catalogue Number for a Standard Range 

One-Gang Vertically Mounted Switch in White Electric 

is 31VA,WE. 

Refer to ‘Standard Range Colours’ on page 12 for 

colour options and their corresponding codes. 

TV Socket 

3kVAc Isolation, 75 Ohm 

31VTV75ACF 

TV Socket 

F Type Connection, 75 Ohm 


F Type, Standard Plate 

32TVFF 

31VTV75F 

TV-FM Splitter 

Standard Plate 

32VTV75FM 


Screw Coaxial, Standard Plate 

32TVSF 

9 

HOW TO ORDER TELEPHONE, DATA AND TV CONNECTION ACCESSORIES

HOW TO ORDER SWITCHED SOCKET OUTLETS 

10 

HOW TO ORDER 

SWITCHED SOCKET OUTLETS 

Switched Socket Outlets are often referred to as GPO’s 

(General Purpose Outlets), Power Points or Power 

Outlets. So that there is no confusion, the description 

‘Switched Socket Outlets’ will be used throughout this 

brochure. Single and twin Socket Outlets are available in 

the Standard Range in horizontal and vertical formats. 

This number indicates the number of sockets included in the product. 

The plate size remains the same for both single and twin switched 

socket outlets, only the number of switches and sockets vary. 

Single Horizontal Single Vertical 

15 

15V 

Please note: Single and Twin Automatically Switched 

Socket Outlets are also available (Catalogue Numbers 

10 and 20). 



If a Quad Socket Outlet is required, this will only 

be achieved by using the Classic C2000 Range 

(Catalogue Number C2015D4). 

Large Format Switched Socket Outlets 

The Catalogue Number for a Single Switched Large 

Format Socket Outlet is 15/2, whereas for a Twin 

Switched Large Format Socket Outlet it is 23. 

15/2 dimensions are 115mm (l) x 115mm (w) x 14mm (d). 


Intermediate Switched Socket Outlets 

The Standard Range also includes a Single Switched 

Intermediate size Socket Outlet, Catalogue Number 14. 

Dimensions are 115mm (l) x 61mm (w) x 13mm (d). 

Skirting Mounted Switched Socket Outlets 

Single Automatic (Catalogue Number 11), 

Twin Automatic (Catalogue Number 11/2), 

Single Switched (Catalogue Number 16), and 

Twin Switched (Catalogue Number 16/2) Skirting 

Mounted Socket Outlets available. 





1 5 V 

Catalogue Numbers will vary depending on the 

number of sockets and whether the product is 

horizontally or vertically mounted. Single Switched 

Socket Outlet dimensions are 115mm (length) x 73mm 

(width) x 14mm (depth). Twin Switched Socket Outlet 

dimensions are 115mm (l) x 72mm (w) x 14mm (d). 

The letter ‘V’ indicates that the product is vertically mounted. 

Where there is no letter ‘V’, the product is horizontally mounted. 

Twin Horizontal 

25 

15/2 23 

14 

11/2 16/2 

Twin Vertical 

25V

HOW TO ORDER 

SWITCHED SOCKET OUTLETS (Continued) 

Special Features and Options 

Standard Range Socket Outlets may also be ordered 

with special features, including an extra switch 

mechanism, safety shutters, neons, double pole 

switched versions, deep plate format products and 

more. For example, a Single Combination Switched 

Socket Outlet may be ordered with Safety Shutters 

(Catalogue Number 15S). Please see the main part 

of the brochure for Combination and Automatically 

Switched Socket Outlets with special features. 

Ordering Colours 

When ordering switched socket outlets, colour 

variations also have to be taken into consideration, as 

the Catalogue Number will change depending on the 

colour of the product. Each colour has its own ‘code’, 

for example, the code for White Electric is ‘WE’ and the 

code for Cream is ‘CM’. The Catalogue Number for a 

Standard Range Twin Switched Socket Outlet in White 

Electric is 25,WE. 

Refer to ‘Standard Range Colours’ on page 12 for 

colour options and their corresponding codes. 

11 

HOW TO ORDER SWITCHED SOCKET OUTLETS (Continued)

STANDARD SERIES COLOURS 

12 

STANDARD SERIES COLOURS 

The Standard Range offers an unsurpassed choice 

of decorator colours, from subtle hues to bold vibrant 

colours for maximum impact. Five colours are available 

as standard and a further six colours available for a 

small surcharge. Two chemical resistant colours are 

available at standard prices. 

Standard Colours Surcharge Colours 

White Electric - WE 

Soft Grey - SG 

Cream - CM 

Chemical Resistant Colours 

Desert Sand - DS 

Brown - BR Black - BK 

Chemical White - RW Chemical Soft Grey - RS 

Each colour has its own code, which must be added 

to the end of the Catalogue Number, if that particular 

colour is desired. For example, if a Vertically Mounted 

Single Switch in White Electric is desired, the 

Catalogue Number is 31VA,WE. 

Red - RD 

Beige - BG 

Nutmeg - NU 

Grey - GY 

Dove Grey - DO

SWITCHES 

Standard Size Flush Switches 

These impact resistant fl ush plates mount to all standard pattern mounting brackets and wall boxes. Being the most 

common plate size in the Standard Range, it also offers the largest choice of options. 

All vertical models can be converted to horizontal by removing mechanisms and turning them 90 o before replacing. 

All models have a base projection of 15mm and room projection of 11mm. 

STANDARD SIZE FLUSH SWITCHES - HORIZONTAL MOUNTING 

Cat. No. Length Width Depth Mounting Centres 

All Products 115mm 73mm 11mm 84mm apart 

31HA A 1 Gang Switch, 250V/10A, 1 way/2 way. 

32HA B 2 Gang Switch, 250V/10A, 1 way/2 way. 

33HA C 3 Gang Switch, 250V/10A, 1 way/2 way. 

34HA D 4 Gang Switch, 250V/10A, 1 way/2 way. 

STANDARD SIZE FLUSH SWITCHES - VERTICAL MOUNTING 



31VA A 1 Gang Switch, 250V/10A, 1 way/2 way. 

32VA B 2 Gang Switch, 250V/10A, 1 way/2 way. 

33VA C 3 Gang Switch, 250V/10A, 1 way/2 way. 

34VA D 4 Gang Switch, 250V/10A, 1 way/2 way. 

35VA E 5 Gang Switch, 250V/10A, 1 way/2 way. 

36VA F 6 Gang Switch, 250V/10A, 1 way/2 way. 

A B 

C D 

E F 

A 

B 

C 

D 

31HA 

34HA 

31VA 

35VA 

13 

STANDARD SIZE FLUSH SWITCHES

ARCHITRAVE AND MINIATURE ARCHITRAVE SIZE FLUSH SWITCHES 

14 

ARCHITRAVE AND MINIATURE ARCHITRAVE 

SIZE FLUSH SWITCHES 

Architrave Size Flush Switches 

Architrave switches are available in models with one to four switches. Also available is a single switch model with a 

deep plate and a double pole version for caravans, mobile homes and similar. 

ARCHITRAVE SIZE FLUSH SWITCHES 


30, 30D, 30/15, 

30D15 

75mm 32mm 10mm 55mm apart 

39 75mm 32mm 10mm 55mm apart 

30DD 77mm 35mm 18mm 55mm apart 

32A 85mm 32mm 10mm 70mm apart 



30 A 1 Gang Switch, 250V/10A, 1 way/2 way. 

30D A 1 Gang Switch, 250V/10A, 1 way, double pole. 

30/15 A 1 Gang Switch, 250V/15A, 1 way/2 way. 

30D15 A 1 Gang Switch, 250V/15A, 1 way, double pole. 

39 B 1 Gang Switch, 250V/10A, 1 way/2 way, 3 position - Low/Off/High. 

30DD C 1 Gang Switch, 250V/10A, 1 way, double pole, deep plate. 

32A D 2 Gang Switch, 250V/10A, 1 way/2 way. 

33A E 3 Gang Switch, 250V/10A, 1 way/2 way. 

34A F 4 Gang Switch, 250V/10A, 1 way/2 way. 

Miniature Architrave Switches 

Miniature Architrave switches are available in single, two or three gang models. They are designed for use in areas 

where space is at a premium. All models are suitable only for direct fi xing. 

MINIATURE ARCHITRAVE SWITCHES 


30T 54mm 27mm 10mm 40mm apart 

32TA 75mm 27mm 10mm 60mm apart 

33TA 98mm 27mm 10mm 83mm apart 

30T A 1 Gang Switch, 250V/10A, 1 way/2 way. 

32TA B 2 Gang Switch, 250V/10A, 1 way/2 way. 

33TA C 3 Gang Switch, 250V/10A, 1 way/2 way. 

A 

B 

C 

A 

B 

C 

D 

E 

F 

30 

39 

30DD 

30T 

32TA 

32A 

33A 

34A 

33TA

INTERMEDIATE AND LARGE FORMAT SIZE 

FLUSH SWITCHES 

Intermediate Size Switches 

One or two gang intermediate size models offer the convenience of either wall or architrave mounting. This range 

offers the option of two mounting centres, 55mm (B) and 78mm (BL). 

INTERMEDIATE SIZE SWITCHES 


31BA, 32BA 95mm 48mm 10mm 55mm apart 

31BLA, 32BLA 95mm 48mm 10mm 78mm apart 

31BA A 1 Gang Switch, 250V/10A, 1 way/2 way (95 x 48mm at centre). 

32BA B 2 Gang Switch, 250V/10A, 1 way/2 way (95 x 48mm at centre). 

31BLA C 1 Gang Switch, 250V/10A, 1 way/2 way (95 x 48mm at centre). 

32BLA D 2 Gang Switch, 250V/10A, 1 way/2 way (95 x 48mm at centre). 

Large Format Size Flush Switches 

These Large Format Switches are used mainly to replace older accessories, particularly in locations such as hospitals 

and schools. Impact resistant, the fl ush plates are available with up to nine mechanisms. 

Plates mount to Standard two gang pattern 157/2 and 164/2 Metal Wall Boxes, 257D2 PVC Deep Wall Boxes, 448 and 

448SD Surface Mounting Blocks, 156/2 Mounting Brackets and 154/2 Mounting Clips. 

All Large Format Switches have a base projection of 14mm. 

LARGE FORMAT SIZE FLUSH SWITCHES - VERTICAL MOUNTING 


All Products 116mm 116mm 11mm 84 x 46mm 

31/2VA A 1 Gang Switch, 250V/10A, 1 way/2 way. 

32/2VA B 2 Gang Switch, 250V/10A, 1 way/2 way. 

33/2VA C 3 Gang Switch, 250V/10A, 1 way/2 way. 

34/2VA D 4 Gang Switch, 250V/10A, 1 way/2 way. 

35/2VA E 5 Gang Switch, 250V/10A, 1 way/2 way. 

36/2VA F 6 Gang Switch, 250V/10A, 1 way/2 way. 

37/2VA G 7 Gang Switch, 250V/10A, 1 way/2 way. 

38/2VA H 8 Gang Switch, 250V/10A, 1 way/2 way. 

39/2VA I 9 Gang Switch, 250V/10A, 1 way/2 way. 

A 

C 

E 

G 

I 

A 

B 

D 

F 

H 

B 

C D 

31BA 

31/2VA 

35/2VA 

39/2VA 

32BA 

31BLA 32BLA 

15 

INTERMEDIATE AND LARGE FORMAT SIZE FLUSH SWITCHES

FLUSH PLATES 

16 

FLUSH PLATES 

Standard Size Flush Plates 

Flush plates can be purchased without the 30M Switch for convenience and increased choice. They are available in 

Miniature, Architrave, Standard and Large Format sizes. 

A series of blank plates are also available for particular applications, such as the termination of unused or looped 

cables, mounting of custom equipment or simply blanking off unused openings in wall/wall cladding. 

Unused ‘gangs’ can be blanked off with 30P. (see Page 60). 

STANDARD SIZE FLUSH PLATES 



31VH A 1 Gang Flush Plate. 

32VH B 2 Gang Flush Plate. 

33VH C 3 Gang Flush Plate. 

34VH D 4 Gang Flush Plate. 

35VH E 5 Gang Flush Plate. 

36VH F 6 Gang Flush Plate. 

31VX G Blank Flush Plate. 

31VXCB G Blank Flush Plate, with 30A terminal block. 

ARCHITRAVE SIZE FLUSH PLATES 



31D 77mm 35mm 18mm 55mm apart 




31 A 1 Gang Flush Plate. 

31D B 1 Gang Flush Plate, deep. 

32 C 2 Gang Flush Plate. 

33 D 3 Gang Flush Plate. 

34 E 4 Gang Flush Plate. 

A B 

C D 

E F 

B 

D 

C 

E 

G 

A 

32 

31VH 

35VH 

31VX 

31D 

34

FLUSH PLATES (Continued) 

MINIATURE ARCHITRAVE SIZE FLUSH PLATES 





31T A 1 Gang Flush Plate. 

32T B 2 Gang Flush Plate. 

33T C 3 Gang Flush Plate. 

INTERMEDIATE SIZE FLUSH PLATES 


31B 95mm 48mm 10mm 55mm apart 

32B 95mm 48mm 10mm 55mm apart 

31BL 95mm 48mm 10mm 78mm apart 

32BL 95mm 48mm 10mm 78mm apart 

31B A 1 Gang Flush Plate, with 55mm mounting centres. 

32B B 2 Gang Flush Plate, with 55mm mounting centres. 

31BL C 1 Gang Flush Plate, with 78mm mounting centres. 

32BL D 2 Gang Flush Plate, with 78mm mounting centres. 

LARGE FORMAT SIZE FLUSH PLATES - VERTICAL MOUNTING 


31/2VX, 31/2V, 

32/2V, 33/2V, 

34/2V, 35/2V, 

36/2V, 37/2V, 

38/2V, 39/2V 

116mm 116mm 11mm 84mm x 46mm 

31/3VX 162mm 115mm 11mm 84mm x 46mm x 46mm 

31/2VX A 1 Gang Blank Flush Plate. 

31/2V B 1 Gang Flush Plate. 

32/2V C 2 Gang Flush Plate. 

33/2V D 3 Gang Flush Plate. 

34/2V E 4 Gang Flush Plate. 

35/2V F 5 Gang Flush Plate. 

36/2V G 6 Gang Flush Plate. 

37/2V H 7 Gang Flush Plate. 

38/2V I 8 Gang Flush Plate. 

39/2V J 9 Gang Flush Plate. 

31/3VX K 3 Gang Blank Flush Plate. 

A 

C 

E 

G 

I 

A 

B 

C 

A B 

C D 

B 

D 

F 

H 

J 

K 

31T 

31T 

31B 

33T 

32B 

31BL 32BL 

31/2VX 

35/2V 

38/2V 

31/3VX 

17 

FLUSH PLATES (Continued)

FLUSH PLATES, DATA COMMS. & WEATHERPROOF SWITCHES 

18 

FLUSH PLATES, DATA COMMS. & WEATHERPROOF SWITCHES 

SKIRTING SIZE FLUSH PLATES 


31BMF, 32BMF 99mm 45mm 18mm 78mm apart 

35BMF 156mm 45mm 18mm 136mm apart 

31BMF A 1 Gang Flush Plate. 

32BMF B 2 Gang Flush Plate. 

35BMF C 5 Gang Flush Plate. 

JUNCTION BOX MOUNTED FLUSH PLATE 

Cat. No. Diameter Depth Mounting Centres 

31VR 70mm Ø 24mm 51mm 

31VR A Round Plate, suits J.Box Mounting (70mm diameter). 

Data Comms. Accessory 

TELEPHONE/DATA OUTLET PLATE 


31VRJ 115mm 73mm 11mm 84mm apart 

31VRJ A Telephone/Data Outlet Plate, with Cat 3 RJ45 Socket. 

Multi-gang Telephone/Data plates should be ordered by purchasing RJ45 Sockets and Plates separately. 

IP54 Rated Weatherproof Switch 

The 31VHWP is an attractive switchplate designed for use 

in outdoor locations such as stairwells, barbecue areas 

and gazebos. 

Completely weatherpoof, the switchplate is particularly suitable 

for 30 Series illuminated press buttons and switch mechanisms 

that are easy to see at night. 

The secret of the switchplate is the translucent rubber membrane 

that keeps out water and dust, yet still enables easy switching. 

IP54 RATED WEATHERPROOF FLUSH SWITCH 


31VHWP 115mm 73mm 11mm 84mm apart 

31VHWP A 1 Gang Weatherproofed Switch Plate (IP54 rated). 

A 

C 

A 

A 

A 

B 

31BMF 

32BMF 

31VR 

31VRJ 

35BMF 

For more 

information, 

check the Clipsal 

Standard Range 

Weatherproof 

Switchplate fl yer 

O/N 17771. 

31VHWP

C-THRU ® LIGHT DIMMERS 

& FAN CONTROLLERS 

A Clipsal C-Thru ® Light Dimmer lets you adjust the 

lighting levels in any area, for any occasion. For instance, 

you may want to add a little romance to an intimate 

dinner, create the right mood for a movie, or leave just 

enough light on to navigate your way to the bathroom 

during the night. 

In commercial environments too, light dimmers have an 

almost endless number of applications. Auditoriums, 

restaurants and boardrooms are just a few of the possible 

locations in which a light dimmer will offer you full control 

of lighting to suit any occasion, and the new C-Thru ® 

Light Dimmers enable you to choose the right dimmer, 

fi rst time - every time. 

In a market fi rst, Clipsal has teamed up with other 

industry leaders and lighting manufacturers to colour 

code both dimmer and load, allowing unprecedented 

ease in compatible product selection. Never before has it 

been so simple to choose the right dimmer or fan control 

product to suit your application. 

The C-Thru ® Light Dimmer unit comprises a separately 

switched, compact, modular dimming mechanism rated 

at 450W (1.8A). The units utilise state-of-the-art Leading 

Edge and Trailing Edge dimming technology to provide 

full control of incandescent and low voltage lighting (using 

either iron core or electronic transformers). 

32E450L, Leading Edge Dimmer, 450W 

The C-Thru ® Product Range is suitable for use in any new 

installation, but is also retrofi ttable, and may be used to 

replace a standard switch in any existing installation. 

Please note that the C-Thru ® Range of Dimmer and Fan 

Speed Control products is immune to the effects of high 

frequency (ripple) signal injection on the mains voltage 

supply. These signals are commonly injected onto the 

mains by the supply authority for such applications as offpeak 

hot water switching and remote meter monitoring. 

This unique Australian design innovation ensures true 

fl icker-free dimming operation. 

Load Compatibility 

Each product in the Clipsal C-Thru ® Product Range is 

colour coded to indicate load compatibility. This colour 

coding concept allows easy selection of the right dimmer 

for your application. 

Load 

Symbol 

Compatible Loads 

Incandescent lighting 

Halogen 240V lamps 

Low voltage lighting 

with iron-core 

transformers 

Low voltage lighting 

with electronic 

transformers 

Exhaust fans 

(shaded pole 

induction motors) 

Ceiling fans 

(split-phase induction 

motors) 

Leading 

Edge 

Dimmer 

32E450L 

Series 

450W 

C-THRU ® COLOUR 

Trailing 

Edge 

Dimmer 

32E450T 


450W 

Recommended C-Thru ® Dimmer/ 

Fan Control Loads 

Look for the compatibility 

sticker on selected lighting 

and fan control products. 

32E450L 


32E500F 


32E450T 


Fan Speed 

Controller 

32E500F 


500W 

Please note: the colour coding scheme outlined above 

is the subject of an exclusive Clipsal patent. 

19 

C-THRU ® LIGHT DIMMERS & FAN CONTROLLERS

DIMMERS, FILTER MODULE & FAN SPEED CONTROLLERS 

20 

DIMMERS, FILTER MODULE & FAN SPEED CONTROLLERS 



32E450L, 

32E450T 

32E450LM, 

32E450TM 

C-THRU ® FAN SPEED CONTROLLER 


32E500F 116mm 73mm 

32E500FM 22mm 22mm 

32E500F A 

115mm 73mm 

22mm 22mm 

11mm - plate 

13mm - knob 

30mm - wall recess 

13mm - knob 

41mm - wall recess N/A 

32E450L A C-Thru ® Light Dimmer, Leading Edge, 220 - 240V/450W. 

11mm - plate 

13mm - knob 


13mm - knob 

41mm - mechanism N/A 

84mm apart 

C-Thru ® Fan Speed Controller, 220 - 240V/500W - standard size gridplate 

and surround complete with one 30M switch and one 32E500FM fan control 

mechanism with knob (suits exhaust fans and ceiling fans). 

32E500FM B C-Thru® Fan Controller Mechanism, 220 - 240V/500W 

(suits exhaust fans and ceiling fans). 

84mm apart 

32E450LM B C-Thru ® Light Dimmer Mechanism, Leading Edge, 220 - 240V/450W. 

32E450T A C-Thru ® Light Dimmer, Trailing Edge, 220 - 240V/450W. 

32E450TM B C-Thru ® Light Dimmer Mechanism, Trailing Edge, 220 - 240V/450W. 

HIGH POWER SERIES LIGHT DIMMERS 


31E800T, 

31E1000L 

32/1000, 

32/2400 

31E800T A 

31E1000L B 

115mm 73mm 

115mm 73mm 

15mm - plate 

11mm - knob 


11mm - plate 

13mm - knob 


84mm apart 

84mm apart 

Trailing Edge Light Dimmer, 250V/800W, suits incandescent and electronic 

transformers. 

Leading Edge Light Dimmer, 250V/1000W, suits incandescent and iron core 

transformers. 

32/1000 A High Power Leading Edge Light Dimmer, 250V/1000VA, remote wired. 

32/2400 B High Power Leading Edge Light Dimmer, 250V/2400VA, remote wired. 

FILTER MODULE 


32EIND 96mm 70mm 48mm 73mm apart 

32EIND A Inductor Filter Module for use with 32 Series High Powered Dimmers. 

C-Thru ® Fan Speed Controller 

The C-Thru ® Fan Speed Controller unit is rated at 500W (2A), and may be used to provide continuous variable speed 

control of motor loads such as ceiling sweep fans and exhaust fans. 

A 

A 

B 

A 

B 

A 

B 

35E450L 

35E450LM 

31E800T 

32/1000 

32EIND 

32E500F 

32E500FM 

35E450TM

CEILING SWEEP FAN CONTROLLERS 

& ELECTRONIC TIMER CONTROLS 

Capacitor Ceiling Sweep Fan Controllers 

FAN SPEED CONTROLLER FOR “AIRFLOW” ACES36AL & ACES48AL 


All Products 115mm 73mm 

31VF3CA A 

11mm - plate 

14mm - knob 


84mm apart 

3 Speed Fan Controller, 100VA, suitable for use with Airfl ow ACES36AL and 

ACES48AL. 

31VF3CB A 3 Speed Fan Controller, 100VA, suitable for Airfl ow ACES56AL and AFLR48. 

This range is available in White Electric (WE) only. 

Electronic Timer Controls 

Time delay switches are a convenient way of saving energy in both domestic and commercial applications such as 

toilets, bathrooms, stairwells, passageways and other areas that are occupied for a limited or known time, ensuring 

electrical loads are switched OFF when not in use. 

Clipsal offers three types of time delay switches. 

The 31VETR is a push-button electronic time delay switch for loads up to 10A. The timer can be set between 15 

seconds and 254 minutes. A remote switching function is also included. Another push-button electronic time delay 

switch is the 31VETR3 which includes remote switching facilities. The time setting can be set from 10 seconds to 15 

hours. The 31VETF incorporates two switched outputs and can be used to turn the fan load on at the same time as the 

light, making it ideal for bathrooms and toilets. When the light is switched off, the fan will remain on for a period of time 

that can be set from 2 to 20 minutes. 

All models have a base projection of 29mm and all terminals accommodate 2 x 2.5mm² cables. 

ELECTRONIC TIMER CONTROLS 



31VETR A 

31VETR3 A 

31VETF B 

Electronic Timer Control, 254 Minute Time Delay, 250V/10A, 2 wire 

- remote switch input. Neon indicator, load on/neon off/neon off, load on. 

Delays between 15 secs and 254 mins. Push button to turn load on for set 

period. Toggle push-button to cancel timer and turn load off. Minimum 

load is 40mA. Suitable for incandescent or fl uorescent lighting. 

Electronic Timer Control, 15 Hour Time Delay, 250V/10A, 3 wire - remote 

switch input. Neon indicator, programmable state. Delays between 10 

secs and 15 hours. Push button to turn load on for set period. Toggle 

push-button to cancel timer. Programmable (NO or NC) output. No 

minimum load. Suitable for incandescent or fl uorescent lighting. 

Electronic Timer Control, 10 Minutes Time Delay, 250V/10A, Fans/Lights 

- lights are operated directly off the switch. Lighting load (incandescent 

only) is 1600VA, fan load is 400VA. Delays between 2 and 20 minutes. 

A 

A 

B 

31VF3CA 

31VF3CB 

31VETR 

31VETR3 

31VETF 

21 

CEILING SWEEP FAN & ELECTRONIC TIMER CONTROLS

TIMERS - PNEUMATIC & ANALOGUE 

22 

TIMERS - PNEUMATIC & ANALOGUE 

Pneumatic Time Delay Switches 

Pneumatic Time Delay switches are robust timers that operate by using air pressure. When the switch is ‘pushed in’, 

the load will remain on until the switch ‘pops out’. The pneumatic pressure can be set by the installer, allowing time 

ranges of 2-10 minutes (with care, 20 minutes). 

PLEASE NOTE: Rotate the control knob carefully and in very small increments (over tightening will damage the 

tapered valve). 

This time switch operates on the air bleed principle and therefore it is not possible to calibrate it too exactingly. The 

timing will vary slightly with manufacturing tolerances, air temperatures, relative humidity and barometric pressure. 

Pneumatic Timers are most commonly used in units to operate the lighting in stairwells and other public places such 

as schools and gymnasiums. 

PNEUMATIC TIME DELAY SWITCHES 


All products 115mm 73mm 11mm 84mm apart 

319 A Time Delay Switch. 

319RA A Time Delay Switch, Reverse Action. 

319N B Time Delay Switch, with Neon. 

319HP C Time Delay Switch, Weatherproof/Hose Proof. 

319X D Time Delay Switch, with Extra Switch. 

Adjusting Pneumatic Time Delay Switches 

Analogue Timer Controls 

Analogue timer controls are available in both switch, socket and portable socket outlet confi gurations. Connected 

Loads can be set by the user to turn ON and turn OFF at different times of the day according to the users requirement. 

Multiple scheduled switching events are supported by all models. 

ANALOGUE TIMER CONTROLS 


TC15/24, 

TC15/15/24, 

TC15/15/7D 

TC32V1, 


TC32V24, 

TC32V7D 


TC475/24 160mm 130mm 120mm N/A 

TC15/24 A 24 Hour Timer, single socket outlet, 250V/10A (with safety shutter). 

TC15/15/24 B 24 Hour Timer, single socket outlet, 250V/15A (with safety shutter). 

TC15/15/7D B 7 Day Timer, single power outlet, 250V/15A (with safety shutter). 

TC32V1 C 1 Hour Timer, fl ush switch, 250V/15A. 

TC32V24 C 24 Hour Timer, fl ush switch, 250V/15A. 

TC32V7D C 7 Day Timer, fl ush switch, 250V/15A. 

TC475/24 D 24 Hour Timer, portable dual switch socket. 

A B 

C D 

D 

........................................... 

C 

A 

B 

319 

TC15/24 

TC32V1 

319HP 

TC475/24A

SUNSET SWITCH, BOOSTER ELEMENT RELAYS & 

SWITCH MULTIPLIERS 

Sunset Switches 

Sunset Switches cleverly operate lighting in response to the surrounding light levels. Only 

switching lights on when they are needed, Sunset Switches are convenient and they save 

money. 

The 31VSSR will automatically turn on a connected load when the ambient light level falls 

below 10 LUX (at around sunset). The load will then turn off the next morning when the light 

level exceeds 30 LUX. Delays of around 8 seconds for turn off and 30 seconds for turn on 

take into account any short term changes in light levels that may turn the light on or off. 

For more information, check the Clipsal 31VSSR Automatic Sunset Switch 

brochure O/N 892-912. 

SUNSET SWITCH 


31VSSR 115mm 74mm 

Plate - 13mm 

Mech - 30mm 

Box - 37mm 

84mm apart 

31VSSR A Sunset Switch, 250V/10A, 16 hours, 2 wire, IP56 (standard size). 

Please refer to the 56 & 66 Series Industrial brochure, O/N 826-812 for information about the 56SSR & 56PEDD3 Sunset Switches. 

BOOSTER ELEMENT RELAY 


31VBER 115mm 73mm 

Plate - 16mm 

Button - 4.5mm 

31VBER A Booster Relay for Solar Hot Water Element, 250V/15A. 


84mm apart 


780/1, 780/2, 

780K1, 780K2 


780/1 A Switch Multiplier, 250V/10A, 1 way. 

780/2 B Switch Multiplier, 250V/10A, 2 way. 

780K1 C Switch Multiplier, 250V/10A, 1 way 

780K2 D Switch Multiplier, 250V/10A, 2 way. 

780M E Switch Multiplier Mechanism, 250V/10A. 

780A2M F Switch Multiplier Mechanism, suits 2 loads 2 way type A bias. 

780B2M F Switch Multiplier Mechanism, suits 2 loads 2 way type B bias. 

A 31VSSR 

Booster Element Relay 

The 31VBER is a Booster Relay for a solar hot water element. The relay drops out when the water reaches a certain 

temperature, returning to solar operation. The push button switch incorporates a neon indicator to illuminate when the 

Booster Element is operating. 

A 31VBER 

Switch Multipliers 

Switch multipliers are used to add additional circuits to existing single circuit installations and also provide two-way 

switching to an existing single switch installation. They are used instead of wall chasing and running wires down the 

wall. In this way, they save both time and money. 

C 

A 

D 

B 

E F 

780/1 

780A2M 

780/2 

23 

SUNSET SWITCH, BOOSTER ELEMENT RELAYS & 

SWITCH MULTIPLIERS

UNDERVOLTAGE RELAYS & KEY TAG TYPE SWITCHES 

24 

UNDERVOLTAGE RELAYS & KEY TAG TYPE SWITCHES 

Under Voltage Relays 

Specifi cally designed to reduce overloads to airconditioners and other sensitive equipment during under voltage 

(brown-out) situations, the relay switching to open circuit. Excessive loads caused by high in-rush currents when 

supply is restored are prevented by the manual reset operation requirement, allowing time to full load restoration. 

Under Voltage Relays are designed to drop power to the outlet when an under voltage supply condition (or a ‘brownout’) 

occurs. 

UNDER VOLTAGE RELAYS 



15X15RZ A Single Power Outlet, 250V/15A (with no volt relay and reset switch). 

15XRZ B Single Power Outlet, 250V/10A (with no volt relay and reset switch). 

32VRZ C No Volt Relay and Reset Switch, 250V/10A, (standard size). 

32VRZ15 C No Volt Relay and Reset Switch, 250V/15A, (standard size). 

Key Tag type switches and Key Operated Switches 

Clipsal’s Standard Range Key Tag Switches and Room 

Access Card Operated Switches are the ideal form 

of energy management for hotels, motels and other 

locations where power can be left on unnecessarily. 

Inserting the key Tag or card into the switch activates 

selected circuits to operate lighting, air-conditioning, 

television, radio and other appliances. Circuits 

to refrigerators and other equipment that need to 

continually run are not connected to the switches. 

Removing the key Tag or card automatically cuts off 

power to all of the circuits to signifi cantly reduce 

power wastage. 

Refer to adjacent page for detailed information on 

this range. 

B 

A 

C 

15XRZ 

32VRZ

KEY TAG & KEY OPERATED SWITCHES 

KEY TAG TYPE SWITCHES 



36VKT3N A Key Tag, suits 3 x 20A, 250V a.c., 1/2way circuit with neon. 

36VKT3NX B 

KEY TAG ONLY 

Key Tag, suits 3 x 20A, 250V a.c., 1/2way circuit, neon, extra 250V a.c. 

10A switch. 

36VKT4 A Key Tag Type Switch, suits 4 x 20A, 250V a.c., 1/2way circuits. 

36VKT4X B 

Key Tag Type Switch, suits 4 x 20A, 250V a.c., 1/2way circuits, extra 10A 

250V a.c. switch mech. 


35VKT 120mm 45mm 5mm N/A 

2034VKT 92mm 40mm 7mm N/A 

35VKT A Key Tag, suits 35VKT series switches. 

2034VKT B Short Key Tag, suits 2034VKT series switches. 

KEY OPERATED SWITCHES 


All Products 115mm 73mm *11mm 84mm apart 

31VK1 A Key Operated Switch, 250V 20A/16AX, 1 way (locks in OFF position). 

31VK1/2 B Key Operated Switch, 250V 20A/16AX, 2 way (locks in OFF position). 

31VK2 A Key Operated Switch, 250V 20A/16AX, 1 way (locks in ON & OFF position). 

31VK2/2 B Key Operated Switch, 250V 20A/16AX, 2 way (locks in ON & OFF position). 

* Depth does not include key height. 

COMMON KEYED SWITCHES 


All Products 115mm 73mm *11mm 84mm apart 

31VK1CK A Key Operated Switch, 250V 20A/16AX, 1 way (locks in OFF position). 

31VK1/2CK B Key Operated Switch, 250V 20A/16AX, 2 way (locks in OFF position). 

31VK2CK A Key Operated Switch, 250V 20A/16AX, 1 way (locks in ON & OFF position). 

31VK2/2CK B Key Operated Switch, 250V 20A/16AX, 2 way (locks in ON & OFF position). 

A 

A 

A 

B 

A 

B 

B 

B 

36VK KEY 

36VK 

35VKT 

31VK1 

31VK2 

2034VKT 

31VK1/2CK 

31VK2/2CK 

* Depth does not include key height. Note: Common key number is 60051. 

25 

KEY TAG & KEY OPERATED SWITCHES

CEILING & FOOT OPERATED SWITCHES 

26 

CEILING & FOOT OPERATED SWITCHES 

Ceiling Switches 

Ceiling switches can be used to operate lights, fans and even hot water boosters. They are convenient in that wires do 

not have to be run down the wall and they can also be placed in an easier switching position, for example, near a bed. 

CEILING SWITCHES 


306, 342, 

343, 346 

306 A 

342 A 

343 A 

346 B 

WILCO CEILING SWITCH 

52mm Ø 71mm 39mm 

Ceiling Switch, 250V/15A a.c., 1 way 

(available in Brown - BR, White Electric - WE). 





Ceiling Switch Cord in 1.8m lengths 

(available in White Electric - WE). 


PC1 57mm 45mm 18mm 30mm x 28mm 

PC1 A 

Foot Operated Switch 

FOOT OPERATED SWITCH 

Ceiling Switch, Pull Cord, 10A, double pole with indicator 


The 360 foot operated switch is very handy when installed under desks to operate heaters, lighting or fans. It can also 

be placed in other convenient positions when ‘foot switching’ is preferred. 


360 93mm 55mm 29mm 68 x 18mm apart 

360 A Foot Switch, 250V/10A, double pole. 

* Please note:- For Mounting Accessory suggestions, refer to your Clipsal Representative. 

A 

A 

B 

A 

306 

346 

PC1 

360

AMERICAN STYLE FLUSH SWITCHES & PLATES 

AMERICAN STYLE FLUSH SWITCHES AND PLATES - INDIRECT MOUNTING 


321,321R 115mm 70mm 8mm 60mm apart 

322/1R 116mm 116mm 8mm 60 x 46mm 

320,320/15 93mm 35mm 35mm 84mm apart 

DC3, DC3-SPDT 93mm 35mm 36mm 84mm apart 

WSW110, 

WSW110/TW, 

WSW116, 

WSW116/TW 

FS169/I, 

FS169/15DPDT 



321 A 1 Gang Switch Plate (available in White Electric - WE). 

321R B 

322/1R C 

320 D 

320/15 D 

DC3 E 

DC3-SPDT E 

WSW110 F 

WSW110/TW G 

Switch Plate, suits one x 405 or 415 series socket 

(available in Brown - BR, Soft Grey - SG, Grey - GY, White Electric - WE). 

Switch Plate, suits one x 320 series switch and 1 x 405 or 415 series 

socket (available in Brown - BR, White Electric - WE). 

Switch Mechanism, 250V a.c./10A, 1 way 

(available in Brown - BR, Grey - GY, White Electric - WE). 

Switch Mechanism, 250V a.c./15A, 1 way 


Flush Switch, 5A, 3 terminal, 1 way, DC, with mounting lugs 

(available in Brown - BR). 

Flush Switch, 5A, 3 terminal, single pole/double throw, DC, with 

mounting lugs (available in Brown - BR). 

Flush Switch, 10A, 1 way 


Flush Switch, 10A, 2 way 


WSW116 F Flush Switch, 15A, 1 way (Brown - BR, Grey - GY, White Electric - WE). 

WSW116/TW G Flush Switch, 16A, 2 way (Grey - GY). 

FS169/I H 

FS169/15DPDT I 

Flush Switch, 10A, intermediate, with mounting lugs 

(available in Grey - GY). 

Flush Switch, 15A, intermediate, double pole/double throw, 

with mounting lugs (available in Grey - GY). 


D 

E 

F 

G 

H 

I 

A 

B 

C 

FS169/I 

321 

321R 

322/1R 

DC3 

WSW110/TW 

27 

AMERICAN STYLE FLUSH SWITCHES & PLATES

SURFACE & PUSH BUTTON SWITCHES 

28 

SURFACE & PUSH BUTTON SWITCHES 

Surface switches are traditional switches that existed before the introduction of the 30 Series mechanism. They are an 

economical alternative to the Heritage Range if a traditional look is preferred. 

WILCO SURFACE SWITCH 


SS165/15/2 52mm Ø 17mm 36mm 

SS165/15/2 A 

SURFACE SWITCHES 

Surface Switch, 15A, 2 way, 3 terminal, screw secured cover, 

52mm diameter (available in Brown - BR, White Electric - WE). 


362, 362/15, 363 60mm Ø 19mm 48mm apart 

389 61mm Ø 27mm 43mm apart 

362 A 

362/15 A 

363 A 

389 B 

BELL PRESS 

WILCO PUSH BUTTON SWITCHES 

Surface Switch, 250V/10A, 1 way, 3 terminal 



(available in Black - BK, Brown - BR, White Electric - WE). 


(available in Black - BK, Brown - BR, White Electric - WE). 

Surface Switch, 250V/25A a.c., 32V d.c., 1 way 

(available in Black - BK, White Electric - WE). 



98 A Bell Press, Illuminated (available in Brown - BR, White Electric - WE). 


PBS136 28mm 15mm 

PBS236 28mm 15mm 

PBS136 A 

PBS236 B 

28mm 

(Room protrusion - 18mm) N/A 

34mm 

(Room protrusion - 18mm) N/A 

Push Button Mechanism with Collar and Locknut, 2A, single pole 


Push Button Mechanism with Collar and Locknut, 2A, double pole 

(available in WE). 

PUSH BUTTON WEATHERPROTECTED 1P53 SURFACE SWITCHES 


All products 60mm 35mm 32mm 67mm x 54mm 

WPBSW110 A 1 Gang Push Button Surface Switch, 10A, 1 way/2 way, single pole. 

WPBSW116 A 1 Gang Push Button Surface Switch, 16A, 1 way/2 way, single pole. 


A 

A 

B 

A 

A 

B 

A 

389 

SS165/15/2 

98 

PBS136 

PBS236 

WPBSW110, 

WPBSW116 

362, 

362/15, 

363

CIRCUIT IDENTIFICATION & MOUNTING ACCESSORIES 

Circuit Identifi cation Products 

Clipsal offers a range of Circuit Identifi cation products to make your job easier. 

CIRCUIT IDENTIFICATION PRODUCTS 


30P, 30PFO 21mm 21mm 10mm 

30PID 21mm 21mm 7mm 

30P A Removable Blank Plug, suits 30 Series. 

30PFO B Plug, marked “FRIDGE - FREEZER ONLY”. 

30PID C 30 Series ID Circuit Plug, tamper proof. 

30PIDA4L* D Label Sheets, 10 x A4 packet (RD, BU, GR, YL, WE colours available). 

9 E Cap, suits switch plate screw recesses. 

9SERIES E Identi-Caps for Circuit Identifi cation. 

*Software for printing these Label Sheets are available on the Alfred CD-ROM Electronic Trade Product Guide. 

Mounting Accessories 

Mounting Accessories are for use when mounting 30 Series mechanisms without a fl ush plate, for example, in a panel 

or enclosure. 

MOUNTING ACCESSORIES 


ET30 6mm N/A N/A N/A 

B30GFZ 45mm 27mm 11mm 24mm apart 

F30Z1, F30Z1.5 

F30Z2, F30Z4 

29mm 29mm N/A N/A 

31/3F 167mm 116mm 11mm 92mm apart 

ET30 A Screw Mounted Earthing Terminal. 

B30GFZ B Mounting Clip with Moulded Surround. 

F30Z1 C Mounting Clip Mechanism, suits 1mm thick sheet. 

F30Z1.5 C Mounting Clip Mechanism, suits 1.5mm thick sheet. 



31/3F D Three Gang Mounting Flange. 

C 

A 

E 

A 

B 

C 

D 

B 

D 

30P 

30PID 

30PIDA4L 

ET30 

B30GFZ 

F30Z1 

31/3F 

30PFC 

9 

29 

CIRCUIT IDENTIFICATION & MOUNTING ACCESSORIES

CABLE CONNECTION ACCESSORIES 

30 


Cable Connection Accessories 

Cable Connection Accessories are used for safety and to anchor cables. 



31VXCB 115mm 73mm 11mm 84mm apart 

32VA15/38TB 115mm 73mm 11mm 84mm apart 

38, 38A, 38X, 

38Y*, 38Z 

22mm Ø TBA N/A 

38HD 25mm 21mm 30mm N/A 

38TB 32mm 22mm N/A 

31VXCB A Blank Plate with 30A Connector Block. 

32VA15/38TB B 30M15 Mech and 38TB Terminal Block, in standard size plate. 

38 C Grommet, suits up to 2.5mm 2 ordinary duty fl ex cord. 

38A C Grommet, suits up to 1.5mm 2 ordinary duty fl ex cord. 

38X C Grommet, suits up to 1mm 2 ordinary duty fl ex cord. 

38Y* D 

Grommet, suits fi gure 8 two core fl ex cord, outer diameter of the 

fi gure 8 core cable is maximum 3mm (each core). 

30Z C Grommet, suits up to 0.75mm 2 light duty fl ex cord. 

38HD E Grommet, suits up to 2.5mm 2 ordinary duty with clamp. 

38TB F Cord Outlet Terminal Block with Grommet, suits 30 series plates. 

* 38Y Grommet requires an 18mm hole for installation. 

F 

A 

B 

C 

D 

E 

31VXCB 

32VA15/38TB 

38 

38Y 

38HD 

38TB

PROTECTED SWITCHES 

PROTECTED SWITCHES - MOULDED 


PSM110 75mm 46mm 51mm 69mm apart 

PSM115 75mm 46mm 51mm 69mm apart 

PSM110 A Protected Switch, 250V/10A, 1 way/2 way. 

PSM115 B Protected Switch, 250V/15A, 1 way/2 way. 

PROTECTED SWITCHES - 250V, 10A, ZINC DIE CAST 


PS110, 

PS110-DC, 

PS110-DP, 

PS110-I, 

PS110-N, 

PS110-TW 

PS110-2, 

PS110-2DP, 

PS110-2I 

PS110 A Single pole. 



PS110-DC A Single pole, DC operation. 

PS110-DP A Double pole. 

PS110-I A Single pole, intermediate. 

PS110-N B Single pole, with neon. 

PS110-TW A Single pole, 2 way. 

PS110-2 C Single pole, two gang. 

PS110-2DP C Double pole, two gang. 

PS110-2I C Single pole, two gang, intermediate. 



PS116, 

PS116/TW 


PS116/2 101mm 80mm 50mm 82mm apart 

PS116 A Single pole. 

PS116/TW A Single pole, two gang. 

PS116/2 B Single pole, 2 way. 

A 

B 

C 

A 

A 

B 

B 

PSM110 

PS110 

PS110-N 

PS110-2 

PS116 

PS116-2 

PSM115 

31 

PROTECTED SWITCHES

SOCKET OUTLETS 

32 

SOCKET OUTLETS

AUTOMATICALLY SWITCHED 


Automatically switched socket outlets are most commonly used to supply power to computers, refrigerators, 

microwaves and other accessories that don’t need to be switched off at the socket. Simply inserting the plug into the 

outlet provides power to equipment. Removing the plug opens the contacts in the socket to provide the same level of 

safety as a conventional switched socket when switched off. 

Automatically switched socket outlets are also advantageous in that an appliance which is plugged into it can be 

switched on or off from a more convenient location, saving time and effort for more valuable activities. 

Available in the Standard Range are single and double automatically switched socket outlets, with a weatherproof 

version (ideal for caravans) and a product with a security fl ap. 

The socket outlets are manufactured in accordance with AS/NZ 3100, AS/NZ 3112, AS/NZ 3133 and other relevant 

Standards Australia Approval and Testing Specifi cations, Wiring Rules and Supply Authority requirements. 

STANDARD SIZE SINGLE AUTOMATICALLY SWITCHED SOCKET OUTLETS 


10, 10D, 10DS, 

10DN, 10DLS, 

10D15S 


10DWP, 

10DWP15, 

93mm 82mm 12mm 70 x 54mm 

415VF, 

415VF15 

101mm 80mm 37mm 76 x 65mm 

10PL 115mm 73mm 22mm 84mm apart 

10 A Single Auto Switched Socket Outlet, 10A, single pole, horizontal mount. 

10D A Single Auto Switched Socket Outlet, 10A, double pole, horizontal mount. 

10DS A 

10DN B 

10DLS C 

10D15S D 

*10DWP E 

*10DWP15 F 

415VF G 

415VF15 H 

10PL I 

Single Auto Switched Socket Outlet, 10A, double pole 

with safety shutters, horizontal mount. 


with safety shutters and neon, horizontal mount. 

Single Auto Switched Socket Outlet, 10A, round earth, double pole with 

safety shutters, horizontal mount. 


with safety shutters, horizontal mount. 

Single Auto Switched Socket Outlet, 10A, double pole fl ush 

weatherproof with fl ap. *Will be superseded by 415VF 

Single Auto Switched Socket Outlet, 15A, double pole fl ush 

weatherproof with fl ap. *Will be superseded by 415VF15 

Single Auto Switched Socket Outlet, 10A, double pole with fl ap, 

IP34 rating. 

Single Auto Switched Socket Outlet, 15A, double pole with fl ap, 

IP34 rating. 

Single Auto Switched Socket Outlet, 10A, single pole with security fl ap, 

horizontal mount. 

E 

G 

A 

B 

C 

D 

F 

H 

I 

10DWP15 

10PL 

10 

10DN 

10DLS 

10D15S 

10DWP 

415VF 

33 

AUTOMATICALLY SWITCHED SOCKET OUTLETS

AUTOMATICALLY SWITCHED SOCKET OUTLETS (Continued) 

34 

AUTOMATICALLY SWITCHED 

SOCKET OUTLETS (Continued) 

STANDARD SIZE TWIN AUTOMATICALLY SWITCHED SOCKET OUTLETS - HORIZONTALLY MOUNTED 



20 A Twin Auto Switched Socket Outlet, 10A, single pole. 

20D A Twin Auto Switched Socket Outlet, 10A, double pole. 

20DS A 

20DN B 

20DLS C 

Twin Auto Switched Socket Outlet, 10A, double pole 

with safety shutters. 

Twin Auto Switched Socket Outlet, 10A, double pole 

with safety shutters and neons. 

Twin Auto Switched Socket Outlet, 10A, round earth, 

double pole and safety shutters. 

SKIRTING MOUNTED SINGLE AUTOMATICALLY SWITCHED SOCKET OUTLET 



11 A 

Single Auto Switched Socket Outlet, skirting mounted, 10A, single pole 

(95 x 45mm at centre). 

SKIRTING MOUNTED TWIN AUTOMATICALLY SWITCHED SOCKET OUTLETS 


11/2 125mm 50mm 17mm 104mm apart 

11/2MF 

11/2MFN 

11/2 A 

11/2MF B 

11/2MFN C 


Twin Auto Switched Socket Outlet, skirting mounted, 10A, single pole 


Twin Auto Switched Socket Outlet, skirting mounted, 10A, single pole, 

suits ducting (156 x 45mm at centre). 

Twin Auto Switched Socket Outlet, skirting mounted, 10A, single pole, 

safety shutters, neons, suits ducting (156 x 45mm at centre). 

A 

B 

C 

A 

A 

B 

C 

20 

20DN 

20DLS 

11 

11/2 

11/2MF 

11/2MFN

AUTOMATICALLY AND SPECIAL PURPOSE 


AUTOMATICALLY SWITCHED SOCKET OUTLETS 



10M A 

10MD A 

10MDS A 

10MDLS B 

10MD15S C 

10MD20 D 

Single Auto Switched Socket Outlet Mechanism, 10A, single pole 

(available in Brown - BR, Grey - GR, White Electric - WE). 

Single Auto Switched Socket Outlet Mechanism, 10A, double pole 

(available in Brown - BR, Grey - GR, White Electric - WE). 


with safety shutter (available in Brown - BR, White Electric - WE). 

Single Auto Switched Socket Outlet Mechanism, 10A, round earth, 

double pole with safety shutter (available in White Electric - WE). 


with safety shutter (available in White Electric - WE). 



SPECIAL PURPOSE AUTOMATICALLY SWITCHED SOCKET OUTLETS 


10MP 43mm 42mm 

10MDP, 10MDPL, 

10MDP15 

10MP A 

10MDP B 

10MDPL C 

10MDP15 D 

43mm 42mm 

33mm 

(Room protrusion - 3.5mm) 

33mm 


See mounting detail 

Pg. 38 


Pg. 38 

Single Auto Switched Socket Outlet Mechanism, 

10A, single pole, panel mount (available in Brown - BR, Grey - GY, 

White Electric - WE). Fascia - 42mm Ø. 


10A, double pole, panel mount (available in Brown - BR, Grey - GY, 



10A, round earth, double pole, panel mount (available in Brown - BR, 

Grey - GY, White Electric - WE). Fascia - 42mm Ø. 


15A, double pole, panel mount(available in Brown - BR, Grey - GY, 


415MP and 10MP Panel Mount Detail 

A 

C 

A 

C 

B 

D 

B 

D 

10MDLS 

10MP 

10MDPL 

10M 

10MD15S 

10MDP 

10MDP15 

35 

AUTOMATICALLY AND SPECIAL PURPOSE 

SWITCHED SOCKET OUTLETS

SPECIAL PURPOSE AUTOMATICALLY 


36 

SPECIAL PURPOSE AUTOMATICALLY 




10MDLB, 

10MDSLB, 

10MDLSLB, 

10MD15SLB, 

10MD20LB 


G10MDS 46mm 46mm 34mm N/A 

G10FMDS, 

G10FMD15S, 

G10FMDLS 

10MDLB A 

10MDSLB A 

10MDLSLB B 

10MD15SLB C 

10MD20LB D 

G10MDS E 

G10FMDS F 

G10FMD15S G 

G10FMDLS H 

74mm Ø 31mm 64mm apart 


10A, double pole, less bracket (available in Grey - GY, Soft Grey - SG, White 

Electric - WE). 


10A, double pole with safety shutter, less bracket (available in Grey - GY, 

White Electric - WE). 


10A, round earth, double pole, safety shutter, less bracket 



15A, double pole with safety shutter, less bracket 



20A, double pole, less brackets (available in White Electric - WE). 

GEC Miniplug Mechanism, 10A, double pole with safety shutter 

(available in Grey - GY, White Electric - WE). 

GEC AF Series Mechanism, 10A, double pole with safety shutter 

(available in Grey - GY, White Electric - WE). 

GEC AF Series Mechanism, 15A, double pole with safety shutter 


GEC AF Series Mechanism, 10A, round earth with safety shutter 


A 

C 

E 

G 

B 

D 

F 

H 

10MDLE 

10MD15SLB 

G10MDS 

GIOFMD15S 

10MDLSLB 

10MD20LB 

GIOFMDS 

GIOFMDLS

SKIRTING MOUNTED & TOGGLE 


SKIRTING MOUNTED SIDE CONNECTING SOCKET OUTLETS 


12M 63mm 43mm 29mm N/A 

17M 90mm 43mm 29mm N/A 

12M A 

17M B 

Single Auto Switched Socket Outlet, skirting mounted, side connecting 

250V/10A, single pole (available in Black - BK, Grey - GY, 

Red - RD, Soft Grey - SG, White Electric - WE). 

Single Switched Socket Outlet, skirting mounted, side connecting, 

250V/10A, single pole (available in Beige - BG, Black - BK, Brown - BR, 

Grey - GY, Red - RD, Soft Grey - SG, White Electric - WE). 

Toggle Switched Socket Outlets 

Toggle switched socket outlets are a foundation product for Clipsal, as they have been around before the 30 Series 

mechanism was introduced. They operate similarly to the 30 Series mechanism, however they have a switch design 

which is more traditional. 

STANDARD SIZE SINGLE TOGGLE SWITCHED SOCKET OUTLETS - HORIZONTALLY MOUNTED 



42/20 A Single Switched Socket Outlet, toggle switch, 250V/20A, single pole. 

42/20N B 

Single Switched Socket Outlet, toggle switch, 250V/20A, single pole 

with safety shutter and neon. 

SINGLE TOGGLE NARROW ARCHITRAVE SIZE SWITCHED SOCKET OUTLETS - VERTICALLY MOUNTED 



40 A 

40D A 

Single Switched Socket Outlet, toggle switch, 250V/10A, single pole 


Single Switched Socket Outlet, toggle switch, 250V/10A, double pole 


A 

B 

A 

A 

B 

12M 

17M 

Screws must be at least 15mm long with countersunk 

heads and fastened with nuts (for both 12M & 17M) 

42/20 

42/20N 

40 

37 

SKIRTING MOUNTED & TOGGLE 


UNSWITCHED SOCKET OUTLETS 

38 


Unswitched Socket Outlets 

Unswitched Socket Outlets are reliable products which have a strong history. They are usually mounted fl ush against 

panels or enclosures and are specialised, in that most Unswitched Socket Outlets are not available in Standard Range 

fl ush plates. 



405, 405/32, 

415, 415L, 

415/110, 415/15 

415MP, 

415MP15, 

415MPL 

426, 426L, 

426/15 

405 A 

405/32 B 

415 C 

415L D 

415/110 E 

415/15 F 

415MP G 

415MP15 H 

415MPL I 

426 J 

426L K 

426/15 L 

96mm 42mm 

43mm 42mm 

33mm 

(Room protrusion 

of 3.5mm) 

33mm 

(Room protrusion 

of 3.5mm) 

84mm apart 


Pg. 38 

66mm Ø 24mm 50mm apart 

Single Auto Switched Socket Outlet, 250V/10A, 2 pin parallel 

(available in Brown - BR, Grey - GY, White Electric - WE). Fascia - 42mm Ø. 

Single Auto Switched Socket Outlet, 32V/15A, 2 pin polarised, 

extra low voltage (available in Brown - BR, Grey - GY, White Electric - WE). 

Fascia - 42mm Ø. 

Single Auto Switched Socket Outlet, 250V/10A, 3 pin 

(available in Brown - BR, Grey - GY, White Electric - WE). 42mm Ø fascia. 

Single Auto Switched Socket Outlet, 250V/10A, 3 pin, 

round earth pin (available in Brown - BR, Grey - GY, White Electric - WE). 



2 round live pins (available in Black - BK, Brown - BR, Grey - GY, 



(available in Brown - BR, Grey - GY, White Electric - WE). Fascia - 42mm Ø. 


panel mount (available in Black -BK, White Electric - WE). Fascia - 42mm Ø. 



Single Auto Switched Socket Outlet, 250V/10A, 3 pin, round earth, 


Single Auto Switched Socket Outlet, 250V/10A, 3 pin, suits round J-Box 


Single Auto Switched Socket Outlet, 250V/10A, 3 pin, round earth pin, 

suits round J-Box (available in Brown - BR, Grey - GY, 

White Electric - WE). 

Single Auto Switched Socket Outlet, 32V/15A, 3 pin, suits round J-Box 


* Please note:- For Mounting Accessory suggestions, 

refer to your Clipsal Representative. 

415MP and 10MP Panel Mount Detail 

A 

C 

F 

H 

J 

L 

B 

D 

E 

K 

G 

I 

405/32 

415L 

415/15 

426 

426/15 

415/110 

405 

415 

415MP 

426L

WILCO & CLOCK CONNECTION ACCESSORIES 

WILCO SOCKET OUTLETS (GREY ONLY) 



FOS106 A Single Automatically Switched Socket Outlet, 250V/10A, 3 fl at pins. 

FOS106R B 

FOS106/2R C 

Single Automatically Switched Socket Outlet, 250V/10A, 3 pin, 

round earth pin. 

Single Automatically Switched Socket Outlet, 110V/10A, 3 pin, 

2 round live pins. 

FOS106/15 D Single Automatically Switched Socket Outlet, 250V/15A, 3 fl at pins. 

FOS105T E 

Single Automatically Switched Socket Outlet, 2 fl at polarised, 

extra low voltage. 

All models available less lugs (add ‘LL’ to cat. no.). 

All models are available in Grey - GY only. 

ELECTRIC CLOCK CONNECTION ACCESSORIES 


408/3, 408/3A, 

408/4 

409/3, 409/3A, 

409/4 


48mm 35mm 16.5mm N/A 

408/3 A Clock Point Recessed Socket, 250V/5A, 50Hz, 3 pin. 

408/3A B Clock Point Recessed Socket, 3 pin, suitable for other than 250V/50Hz. 

408/4 C Clock Point Recessed Socket, 250V/15A, 4 pin. 

409/3 D Clock Point Plug, 250V/5A, 50Hz, 3 pin. 

409/3A E Clock Point Plug, 3 pin, suitable for other than 250V/50Hz. 

409/4 F Clock Point Plug, 250V/5A, 50Hz, 4 pin. 

A B 

D E 


A 

C 

E 

C 

B 

D 

F 

FOS106 

FOS106/2R 

408/3A 

409/3 

408/3 

409/4 

39 

WILCO & CLOCK CONNECTION ACCESSORIES


40 

SWITCHED 

SOCKET OUTLETS

SWITCHED 


The Standard Range offers a huge variety of Switched Socket Outlets. Available in 10 and 15A ratings, vertical and 

horizontal formats, they also come with a number of options such as neons, extra switches and safety shutters, 

not to mention two-piece base versions and more. Also available are large format, intermediate and skirting 

mounted versions. 

All terminal screws face the same direction and are backed off for easy cable insertion. Socket terminal bores are 5.5mm. 

Switched Socket Outlets are manufactured in accordance with AS/NZ 3100, AS/NZ 3112, AS/NZ 3133 and 

other relevant Australian and New Zealand Standards, and comply with all relevant Wiring Rules and Electrical 

Authorities’ requirements. 

Double Pole Switched Socket Outlets 

The safety features of double pole switched sockets has led to them becoming an integral part of electrical 

accessories in recent times. Standard Range double pole switched socket outlets enable marine craft, caravan and 

mobile home manufacturers to install double pole switched sockets in their boats, vans and homes to comply with 

AS/NZS3000 requirements. 

STANDARD SIZE SINGLE SWITCHED SOCKET OUTLETS - HORIZONTALLY MOUNTED 


15 Series 115mm 73mm 14mm 84mm apart 

15DD Series 115mm 73mm 33mm 84mm apart 

15 A Single Switched Socket Outlet, 250V/10A. 

15S A Single Switched Socket Outlet, 250V/10A, with safety shutter. 

15N B Single Switched Socket Outlet, 250V/10A, with safety shutter and neon. 

15D A Single Switched Socket Outlet, 250V/10A, double pole. 

15D15 C Single Switched Socket Outlet, 250V/15A, double pole. 

15DN B 

Single Switched Socket Outlet, 250V/10A, double pole 

with safety shutter and neon. 

15DD D Single Switched Socket Outlet, 250V/10A, double pole, deep plate. 

15DDN E 

15DX F 

Single Switched Socket Outlet, 250V/10A, double pole, deep plate, safety 

shutter and neon. 

Single Switched Socket Outlet, 250V/10A, double pole with removable 

extra switch. 

15/15 G Single Switched Socket Outlet, 250V/15A. 

15/15S G Single Switched Socket Outlet, 250V/15A, with safety shutter. 

15/15N H Single Switched Socket Outlet, 250V/15A, with safety shutter and neon. 

15L I Single Switched Socket Outlet, 250V/10A, round earth pin. 

15LN J 

Single Switched Socket Outlet, 250V/10A, round earth pin, neon and 

safety shutter. 

15X K Single Switched Socket Outlet, 250V/10A, with removable extra switch. 

15XS K 

15XN L 

15XX M 

Single Switched Socket Outlet, 250V/10A, with removable extra switch 

and safety shutter. 

Single Switched Socket Outlet, 250V/10A, with removable extra switch, 

neon and safety shutter. 

Single Switched Socket Outlet, 250V/10A, with two removable 

extra switches. 

A 

B 

C 

D 

E 

F 

G 

H 

I 

J 

K 

L 

M 

15 

15N 

15DD 

15DDN 

15/15N 

15L 

15X 

15XX 

41 


TWIN SWITCHED SOCKET OUTLETS - HORIZONTALLY MOUNTED 

42 

TWIN SWITCHED SOCKET OUTLETS- 

HORIZONTALLY MOUNTED 

STANDARD SIZE TWIN SWITCHED SOCKET OUTLETS - HORIZONTALLY MOUNTED 



25 A Twin Switched Socket Outlet, 250V/10A. 

25S A Twin Switched Socket Outlet, 250V/10A with safety shutters. 

25N D 

Twin Switched Socket Outlet, 250V/10A with neons and 

safety shutters. 

25D B Twin Switched Socket Outlet, 250V/10A, double pole. 

25D15 C Twin Switched Socket Outlet, 250V/15A, double pole. 

25/15 E Twin Switched Socket Outlet, 250V/15A. 

25/15S E Twin Switched Socket Outlet, 250V/15A, with safety shutters. 

25/15N F 

Twin Switched Socket Outlet, 250V/15A, with neons and 

safety shutters. 

25/1510 G Twin Switched Socket Outlet, 250V/15A and 10A. 

25L H Twin Switched Socket Outlet, 250V/10A, round earth pin. 

25X I Twin Switched Socket Outlet, 250V/10A with extra one way switch. 

25XS I 

MF25X J 

ML25X K 

Twin Switched Socket Outlet, 250V/10A, extra one way switch 

and safety shutters. 

Twin Switched Socket Outlet, 250V/10A, marked with “FAN” on 

extra switch. 

Twin Switched Socket Outlet, 250V/10A, marked with “LIGHT” on 

extra switch. 

25XA L Twin Switched Socket Outlet, 250V/10A with removable extra switch. 

25XAN M 

25XD I 

Twin Switched Socket Outlet, 250V/10A, removable extra switch, 

neons and safety shutters. 

Twin Switched Socket Outlet, 250V/10A, double pole and removable 

extra switch. 

A 

B 

C 

D 

E 

F 

G 

H 

I 

J 

K 

L 

M 

25 

25N 

25D15 

25/15N 

25X 

MF25X 

ML25X 

25XAN

SINGLE & TWIN SWITCHED SOCKET OUTLETS - 

VERTICALLY MOUNTED 

STANDARD SIZE SINGLE SWITCHED SOCKET OUTLETS - VERTICALLY MOUNTED 



15V A Single Switched Socket Outlet, 250V/10A. 

15VS A Single Switched Socket Outlet, 250V/10A with safety shutters. 

15VN B Single Switched Socket Outlet, 250V/10A with safety shutters and neon. 

15V15 C Single Switched Socket Outlet, 250V/15A. 

15V15N D Single Switched Socket Outlet, 250V/15A with safety shutters and neon. 

15VX E Single Switched Socket Outlet, 250V/10A with removable extra switch. 

15VXS E 

15VXN F 

15VXX G 

Single Switched Socket Outlet, 250V/10A with safety shutters 

and removable extra switch. 

Single Switched Socket Outlet, 250V/10A with safety shutters, neon 

and removable extra switch. 

Single Switched Socket Outlet, 250V/10A with two removable 

extra switches. 

STANDARD SIZE TWIN SWITCHED SOCKET OUTLETS - VERTICALLY MOUNTED 


15/2V, 15/2VS, 

15/2VN, 15D2V, 


15DD2V 133mm 83mm 37mm 97mm 

25V, 25VXA 115mm 73mm 16mm 84mm apart 

15/2V A Twin Switched Socket Outlet, 250V/10A, two piece base. 

15/2VS A 

15/2VN B 

Twin Switched Socket Outlet, 250V/10A with safety shutters, 

two piece base. 

Twin Switched Socket Outlet, 250V/10A with neons and safety shutters, 


15D2V A Twin Switched Socket Outlet, 250V/10A, double pole, two piece base. 

15DD2V C 

Twin Switched Socket Outlet, 250V/10A, double pole with deep plate, 


25V D Twin Switched Socket Outlet, 250V/10A. 

25VXA E Twin Switched Socket Outlet, 250V/10A with removable extra switch. 

A B 

C D 

E F 

A 

C 

E 

G 

B 

D 

15V 

15V15N 

15VXX 

15/2V 

15DD2V 

25V 

43 

SINGLE & TWIN SWITCHED SOCKET OUTLETS - 

VERTICALLY MOUNTED

SKIRTING MOUNTED & INTERMEDIATE 


44 

SKIRTING MOUNTED & INTERMEDIATE 


SKIRTING MOUNTED SINGLE SWITCHED SOCKET OUTLETS 



16 A 

16N B 

16F C 

16/15 D 

16X E 

16D A 

Single Switched Socket Outlet, skirting mounted, 250V/10A with safety 

shutter (98 x 45mm at centre). 

Single Switched Socket Outlet, skirting mounted, 250V/10A with safety 

shutter and neon (98 x 45mm at centre). 

Single Switched Socket Outlet, skirting mounted, 250V/10A, 

in line terminals (98 x 45mm at centre). 

Single Switched Socket Outlet, skirting mounted, 250V/15A 


Single Switched Socket Outlet, skirting mounted, 250V/10A 

with removable extra switch (125 x 45mm at centre). 

Single Switched Socket Outlet, skirting mounted, 250V/10A, double pole 


SKIRTING MOUNTED TWIN SWITCHED SOCKET OUTLETS 


16/2 Series 168mm 45mm 18mm 145mm apart 

16/2M Series 156mm 44mm 18mm 136mm apart 

16/2 A 

16/2S A 

16/2N B 

16/2F C 

16/2MF D 

16/2MF1510 E 

Twin Switched Socket Outlet, skirting mounted, 250V/10A 

(168 x 45mm). 

Twin Switched Socket Outlet, skirting mounted, 250V/10A, 

with safety shutters (168 x 45mm). 

Twin Switched Socket Outlet, skirting mounted, 250V/10A, with neons 

and safety shutters (168 x 45mm). 

Twin Switched Socket Outlet, skirting mounted, 250V/10A, 

with straight sides. 

Twin Switched Socket Outlet, skirting mounted, 250V/10A, suits ducting 

(156 x 44mm). 

Twin Switched Socket Outlet, skirting mounted, 250V/15A & 10A, 

suits ducting (156 x 44mm). 

16/2MFD D Twin Switched Socket Outlet, skirting mounted, 250V/10A, double pole. 

INTERMEDIATE SINGLE SWITCHED SOCKET OUTLETS - HORIZONTALLY MOUNTED 



14 A Single Switched Socket Outlet, intermediate size, 250V/10A, horizontal. 

A 

B 

C 

D 

E 

A 

B 

C 

D 

E 

A 

16 

16N 

16F 

16/15 

16X 

16/2 

16/2N 

16/2F 

16/2MF 

16/2MF1510 

14

LARGE FORMAT & PROTECTED 


LARGE FORMAT SIZE SINGLE SWITCHED SOCKET OUTLETS - HORIZONTALLY MOUNTED 


All products 115mm 115mm 14mm 84 x 46mm 

15/2 A Single Switched Socket Outlet, large format, 250V/10A, single pole. 

15/2S A 

15/2N B 

Single Switched Socket Outlet, large format, 250V/10A, single pole with 

safety shutter. 

Single Switched Socket Outlet, large format, 250V/10A, single pole with 

safety shutter and neon. 

LARGE FORMAT SIZE TWIN SWITCHED SOCKET OUTLETS - VERTICALLY MOUNTED 


All products 115mm 115mm 11mm 84 x 46mm 

25/2V A Twin Switched Socket Outlet, 250V/10A (115 x 115mm). 

25/2VS A 

25/2VN B 

Twin Switched Socket Outlet, 250V/10A with safety shutters 

(115 x 115mm). 

Twin Switched Socket Outlet, 250V/10A with neons and safety shutters 

(115 x 115mm). 

LARGE FORMAT SIZE TWIN SWITCHED SOCKET OUTLETS - HORIZONTALLY MOUNTED 



23 A Twin Switched Socket Outlet, large format, 250V/10A. 

Protected Switched Socket Outlets 

A 

B 

A 

B 

A 

15/2 

15/2N 

25/2V 

25/2VN 

Electricity brings with it the life threatening danger of electrocution, and accidents do occur. Clipsal Residual Current 

Devices are renowned for being at the forefront of RCD technology. The 15/15EL and 25EL Series are RCD protected 

single and twin socket outlets that provide a simple method of individual circuit protection for your safety. 

They simply replace existing socket outlets and work by protecting not only their own outlet(s) but all ‘downstream’ 

outlets on the same circuit. If a fault occurs, power will be cut in less than 40 milliseconds. The 10mA versions are most 

commonly used in hospitals and similar locations, whereas the 30mA versions are used in homes and offi ces. 

Surge protection is ideal for protecting electronic devices (computers, TVs, stereos) from damage against harsh surge 

and spike voltages that can occur on the mains supply to the premises. They could save you thousands of dollars 

protecting expensive electronic equipment. Please refer to the top of the next page for technical information and 

dimensions for this range. 

23 

45 

LARGE FORMAT & PROTECTED 


SAFETY, COOKER SOCKET & PLUG 

AND UNIVERSAL SHAVER OUTLETS 

46 

SAFETY, COOKER SOCKET & PLUG AND UNIVERSAL SHAVER OUTLETS 

PROTECTED SOCKET OUTLETS 


Earth Leakage 

Protected Outlets 116mm 74mm 30mm 84mm apart 

25SF 115mm 73mm 

plate - 17mm 

wall recess - 23mm 

15/15EL10 A Single Switched Socket Outlet, 250V/15A, with RCD, 10mA. 

15/15EL30 A Single Switched Socket Outlet, 250V/15A, with RCD, 30mA. 

25EL10 B Twin Switched Socket Outlet, 250V/10A, with RCD, 10mA. 

25EL30 B Twin Switched Socket Outlet, 250V/10A, with RCD, 30mA. 

25ELSB C Spacer Block, (L122 x W83 x H30mm). 

25SF D 

Twin Switched Socket Outlet, 250V/10A, surge protected, 

(L115 x W73 x H16mm). 

25SFM E Surge Filter Mechanism , 250V/10A 

Cooker Socket Outlet and Plug 

COOKER SOCKET OUTLET AND PLUG 

84mm apart 

The Cooker Socket Outlet and plug are used so that the stove in a new home can be plugged in by the end user at the 

last stages of development rather than hard wired by the electrician. This is so that the stove is not a ‘sitting duck’ in a 

new home during development for thieves to steal. When maintenance or cleaning is required, it also means that the 

stove can be unplugged safely. 


31VCS 115mm 73mm 11mm 84mm apart 

800CL A 1.8m, 4mm 2 Cord, with 250V/32A 3 pin plug. 

31VCS B 3 Pin Cooker Socket on Standard Plate, 250V/32A (suits 800CL). 

Universal Shaver Outlets 

Universal Shaver Outlets are used in hotels where international customers require different voltage outlets and an 

outlet to plug their shavers into. These are superb products for hotels. 

UNIVERSAL SHAVER OUTLET 


727 258mm 73mm 17mm 230 x 40mm 

727H 184mm 85mm 18mm 152mm 

727V 184mm 85mm 18mm 152mm 

727 A Universal Shaver Outlet, Dual Voltage, 240V - 110V. 

727H B Universal Shaver Outlet, Dual Voltage, 240V - 110V (horizontal mount). 

727V C Universal Shaver Outlet, Dual Voltage, 240V - 110V (vertical mount). 

SURGE 

PROTECTED 

WHEN LIT 

C 

B 

A 

A 

B 

C 

B 

D 

E 

A 

15/15EL10 

25ELSB 

800CL 

25SF 

31VCS 

727 

727H 

727V

TV ANTENNA CONNECTION ACCESSORIES 

TV Antenna Connection Accessories 

Computers and fax machines are now an everyday part of our lives, not only in the offi ce, but also in our homes. The 

Standard Range includes TV and communications accessories for every application. 

75 Ohm Coaxial Sockets 

There are four 75 Ohm coaxial TV sockets available in Standard Range gridplates. Each provides a secure 

connection to antenna cables to ensure optimum reception. 

Included in the range is a two gang plate with a TV/FM splitter between TV and radio or other signals to be divided 

amongst different receivers. 

Also included in the Standard Range of telecommunications’ accessories is a gridplate that enables easy installation 

of printed circuit boards. 




31VTVA A 1 Gang Standard Pattern Television Assembly. 

31VTV75 B TV Antenna Socket in Standard Plate, 75 Ohm. 

31TVF C “PAY TV” Antenna Socket, in standard size plate. 

32TVACFF D “PAY TV/FTA TV” with a.c. Isolation. 

32TVFF E “PAY TV/FTA TV” with F Type Connection. 

32TVSF F “PAY TV/FTA TV” Screw Coaxial Connection. 

31VTV75ACF G TV Socket with 3kcV a.c. Isolation, 75 Ohm in standard size plate. 

31VTV75F H TV Socket with F Type Connection, 75 Ohm in standard size plate. 

32VTV75FM I TV-FM Splitter, in standard size plate. 

A 

B 

C 

D 

E 

F 

G 

H 

I 

31VTVA 

31TVF 

32TVFF 

32VTV75FM 

47 

TV ANTENNA CONNECTION ACCESSORIES

TV CONNECTION SOCKETS, PLUGS & TERMINATORS 

AND ACCESSORIES 

48 

TV CONNECTION SOCKETS, PLUGS & 

TERMINATORS AND ACCESSORIES 

CONNECTION SOCKETS, PLUGS AND TERMINATORS 


30TV75P, 

30TV75CS 

30TV75C, 

30TV75C1, 

30TV75T 

33mm 11mm 11mm N/A 

18mm 17mm 17mm N/A 

30TV75P A Coaxial Cable Plug, 75 Ohm. 

30TV75CS B TV Antenna Connection Socket, 75 Ohm. 

30TV75C C Coaxial RG59 Cable Connection Plug, 75 Ohm (screw type). 

30TV75C1 D Coaxial RG9 Cable Connection Plug, 75 Ohm (screw type). 

30TV75T E Terminator, suits screw type sockets. 

SURFACE MOUNTING CONNECTION ACCESSORY 


30TV75S 54mm 29mm 25mm N/A 

30TV75S A Coaxial Cable Surface Socket, 75 Ohm. 

A 

D 

E 

A 

B 

C 

30TV75CS 

30TV75C 

30TV75C1 

30TV75CT 

30TV75S 

30TV75P

TV ANTENNA MECHANISMS 

AND FLY LEADS 

ANTENNA MECHANISMS 


30PFM 22mm 22mm 26mm N/A 

30TVM 22mm 22mm 19mm N/A 

30TVFM 21mm 21mm 19mm N/A 

30TV75M 22mm 22mm 38mm N/A 

30TV75MF 22mm 22mm 35mm N/A 

30TV75MACF 22mm 22mm 33mm N/A 

30TV75MS 22mm 22mm 28mm N/A 

30PFM A “F” Type Connection, 75 Ohm suits “PAY TV”. 

30TVM B TV Socket, 300 Ohm type (rear clip). 

30TVFM C TV Socket, 300 Ohm type (front clip). 

30TV75M D TV Antenna Socket, 75 Ohm, suits 30 series plates. 

30TV75MF E TV Antenna Socket, 75 Ohm, with “F” type connection. 

30TV75MACF F TV Antenna Socket, 75 Ohm, with 3kV a.c. isolation. 

30TV75MS G TV Antenna Socket, 75 Ohm (screw fi xing, solderless). 

Fly Leads 

FLY LEADS 

Cat. No. Description 

3105FL118MW A Male to Male Fly Lead, 1.8M. 

3105FL118FW B Male to Female Fly Lead, 1.8M. 

A B 

Fly leads are loose, fl oating cable as opposed to being hard wired, meaning that they are ‘free and fl oating’ to allow 

them to be attached between two points. 

B 

E 

G 

A 

C 

D 

F 

30PFM 

30TV75M 

30TV75MACF 

30TV75MS 

3105FL118MW 

49 

TV ANTENNA MECHANISMS AND FLY LEADS

50 

CHEMICAL RESISTANT STANDARD 

INDUSTRIAL RANGE

CHEMICAL RESISTANT 

STANDARD INDUSTRIAL RANGE 

Improved Chemical Resistance 

The majority of Clipsal products are manufactured from 

polycarbonate, which provides excellent performance 

across a broad spectrum of specifi c applications. 

However, the high standards of hygiene required 

in hospitals and food related industries sometimes 

involve the use of harsh chemicals which can degrade 

polycarbonate. 

To address these problems, Clipsal have worked 

closely with their material suppliers to develop an alloy 

resistant to these chemicals and with only a minimal 

reduction in impact strength. 

The Standard Industrial Range is limited at this time 

to 16 products and 2 colours. Resistant White (RW) 

CHEMICAL RESISTANT STANDARD INDUSTRIAL RANGE 

Cat. No. 

31VA, 32VA, 

Length Width Depth Mounting Centres 

33VA, 34VA, 

35VA, 36VA, 

31VX 


15, 15X, 15/15, 

15V, 25V 


25, 25XA 115mm 73mm 16mm 84mm apart 


449ASD 116mm 73mm 14mm 84mm apart 

31VA A Flush Plate, with 1 x 30M mechanism in vertical format. 

32VA B Flush Plate, with 2 x 30M mechanism in vertical format. 

33VA C Flush Plate, with 3 x 30M mechanism in vertical format. 

34VA D Flush Plate, with 4 x 30M mechanism in vertical format. 

35VA E Flush Plate, with 5 x 30M mechanism in vertical format. 

36VA F Flush Plate, with 6 x 30M mechanism in vertical format. 

31VX G Blank Flush Plate. 

15 H Single Switched Socket Outlet, 250V/10A, horizontal mounting. 

15X I 

Single Switched Socket Outlet, 250V/10A, with extra switch, 

horizontal mounting. 

15/15 J Single Switched Socket Outlet, 250V/15A, horizontal mounting. 

15V K Single Switched Socket Outlet, 250V/10A, vertical mounting. 

25V L Twin Switched Socket Outlet, 250V/10A, single base, vertical mounting. 

25 M Twin Switched Socket Outlet, 250V/10A, horizontal mounting. 

25XA N 

449A O 

449ASD P 

Twin Switched Socket Outlet, 250V/10A, with extra switch, 

horizontal mounting. 

1 Gang Mounting Block, suits all fl ush plates with 115 x 73mm 

and 84mm centres. 

14mm Spacer, for standard pattern accessories, with 84mm centres, 

four mounting holes in centre. 

has been colour matched to standard White Electric. 

Resistant Soft Grey (RS) has been matched to 

standard Soft Grey. 

Standard Industrial Range products are identifi able 

by a small symbol on the front of the plate. The ‘CR’ is 

for Chemical Resistant and the numeral ‘1’ identifi es 

the material. If other materials come into use at a later 

time for different applications, different numerals will 

be used. 

To order Standard Industrial Range products use 

standard product codes and specify Resistant White 

(RW) or Resistant Soft Grey (RS). All ratings and 

specifi cations are the same as the corresponding 

product in the Standard Range. 

A B 

C D 

E F 

G 

H 

K L 

I 

J 

M 

N 

O P 

31VA 

33VA 

31VX 

15 

251 

449ASD 

51 

CHEMICAL RESISTANT RESISTANT STANDARD INDUSTRIAL RANGE


INDUSTRIAL RANGE (Continued) 

52 


STANDARD INDUSTRIAL RANGE (Continued) 

CHEMICAL COMPARISONS 

Product Type (colour) Standard Polycarbonate Colours Resistant White / Resistant Soft Grey 

Acids 

Weak Solutions 

Hydrochloric 10% EXCELLENT EXCELLENT 

Nitric 10% EXCELLENT EXCELLENT 

Concentrate 

Sulphuric 100% POOR POOR 

Alkalis 

Weak Solutions 

Sodium Hydroxide 10% (Caustic Soda) POOR GOOD 

Concentrate 

Potassium Hydroxide 100% POOR POOR 

Automotive 

Petroleum POOR EXCELLENT 

Lubricating Oils POOR EXCELLENT 

Hydraulic Oil POOR EXCELLENT 

Solvents 

Aliphatic Hydrocarbons (Alkanes) 

Methane EXCELLENT EXCELLENT 

Propane EXCELLENT EXCELLENT 

Alcohols 

Ethylene Glycol EXCELLENT EXCELLENT 

Glycerol (Glycerin) FAIR GOOD 

Methyl Alcohol (Methanol) POOR GOOD 

Ethyl Alcohol (Ethanol) EXCELLENT EXCELLENT 

Amines 

Aniline POOR POOR 

Aromatic Hydrocarbons 

Methyl Benzene POOR GOOD 

Xylene POOR GOOD 

Ethers 

Dimethyl Ethyl EXCELLENT EXCELLENT 

Ketones 

Acetone POOR FAIR 

Acetophenone POOR FAIR 

Ethyl Methyl Ketone POOR FAIR


STANDARD INDUSTRIAL RANGE (Continued) 

CHEMICAL COMPARISONS 

Product Type (colour) Standard Polycarbonate Colours Resistant White / Resistant Soft Grey 

Miscellaneous 

Detergent EXCELLENT EXCELLENT 

Inorganic Salts 

Magnesium Sulphate EXCELLENT EXCELLENT 

Oxidising Agents 

Weak Solution 

Sodium Hypochlorite 5% EXCELLENT EXCELLENT 

Strong Solution 

Hydrogen Peroxide 30% EXCELLENT EXCELLENT 

Water 

Ambient EXCELLENT EXCELLENT 

Hot> 60 o C EXCELLENT GOOD 

Steam POOR POOR 

This table should be used as a guide only. Any end user should test to evaluate the suitability of any chemical, with 

any plastic. 

EXCELLENT Recommended; no adverse effects after extended exposure. 

GOOD Acceptable; minimal loss of mechanical properties after long periods of exposure. 

FAIR Marginal acceptability; loss of mechanical properties after long periods of exposure. 

POOR Not recommended for use. 

53 


INDUSTRIAL RANGE (Continued)

PROTECTED SWITCHED SOCKET OUTLETS 

54 

PROTECTED SWITCHED SOCKET OUTLETS 

Where power is required in Commercial and Industrial applications, the Clipsal Protected Switched Socket range is the 

perfect product. Built tough to last, and in a number of confi gurations to suit your needs, this range stands the test 

of time. 

The range is available in zinc die cast and you will fi nd matching switch outlets on page 31. 

Please see the table below for details on the full range, including dimensional specifi cations. 

PROTECTED SWITCHED SOCKET OUTLETS - 10A 


PC110, 

PC110-2FR, 

PC110-2RF, 

PC110-N 

PC110V-2, 

PC110V-2-DP, 

PC110 A 

PC110-2FR B 

PC110-2RF 

PC110-N D 

PC110V-2 E 

PC110V-2-DP E 


142mm 102mm 50mm 84 x 82mm apart 

Protected Switched Socket Outlet, 250V/10A, zinc die cast, 

3 fl at sockets. 


2 fl at, 1 round socket. 


2 round, 1 fl at socket. 


3 fl at sockets, with neon. 


3 fl at sockets, vertical mount, 2 gang. 


3 fl at sockets, vertical mount, 2 gang, double pole. 

PROTECTED SWITCHED SOCKET OUTLETS - 15A 


PC115, PC115-N 101mm 79mm 50mm 82mm apart 

PC115V-2 141mm 102mm 50mm 84 x 86mm apart 

PC115 A 

PC115-N B 

PC115V-2 C 


3 fl at sockets. 


3 fl at sockets, with neons. 


3 fl at sockets, vertical mount, 2 gang. 

A 

B 

A 

B 

D 

E 

C 

PC110 

PC110-FR 

PC110-N 

PC110V-2 

PC115 

PC115-N 

PC115V-2

The Clipsal switch shape was always 

destined for greatness. 

It was fi rst developed in 1963 and proved to be a 

great leap forward. Unsatisfi ed with the hard lines of 

traditional switch rockers at the time, Clipsal engineers 

fashioned a more stylish alternative. The Standard 

Range of Switches and Socket Outlets was the fi rst to 

use the new switch shape. 

Over the years the Clipsal switch shape has undergone 

very subtle changes to adapt to new technologies, 

plastics and designs. But to the naked eye the original 

design remains unchanged and is as strong today as 

it was many years ago. Today, you’ll fi nd the Clipsal 

switch shape in dozens of different switch designs. 

The 30 Series can easily be converted from vertical to 

horizontal mounting by removing the mechanism and 

turning it through 90°. Most switch bases fi t a 22mm 

diameter hole and have terminal bores of 4.1mm unless 

specifi ed otherwise. 

Switch assemblies are also available with the switch 

mechanisms further secured by screws located behind 

the switchplate. These assemblies are designed 

to prevent the mechanisms being forced out of the 

switchplate which is important when the switches 

are used in areas where they may be subjected to 

vandalism or undue physical abuse. 

The gentle curves of the overall shape are equally 

proportioned to provide uncomplicated symmetry. 

It is this fl exibility and strength in design that has 

enabled the Clipsal switch shape to adapt to just about 

every Clipsal switch and socket range that has been 

designed since the 1960s. 

Quality Assurance surrounds everything Clipsal 

does and production of the Clipsal switch shape is no 

exception. Clipsal was the fi rst Australian manufacturer 

of electrical wiring accessories to achieve quality 

endorsed status and is now recognised by quality 

status systems around the world. 

It is this commitment to quality that has given the 

Clipsal switch shape its longevity. Its sleek styling was 

an immediate success. 

And through Clipsal’s dedication to perfection and 

continuous improvement it has remained so. Indeed, 

we like to think it will always be that way. 

The shape of the switch dolly is a trademark 

of Clipsal Australia Pty Ltd 

55 

30 SERIES SWITCHES - A CLIPSAL TRADEMARK

30 SERIES SWITCH MECHANISMS 

56 

30 SERIES SWITCH MECHANISMS 

SWITCH MECHANISMS 


30M A 

30MRD B 

30FLM A 

30FLM15 A 

30RSM2 C 

250V/10A, 1 way/2 way - terminal bores of 4.1mm ø accommodate 

4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 

250V/10A, 1 way/2 way (with red dolly mark)- terminal bores of 4.1mm ø 

accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. 

M rating is 100. 

250V/10A, 1 way/2 way (suits fl uoro loads)- terminal bores of 4.1mm ø 

accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M 

rating is 120. 

250V/15A, 1 way/2 way (suits fl uoro loads)- terminal bores of 4.1mm ø 

accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M 

rating is 90. 

250V/15A, Rotary (2 On - 2 Off) - also suitable for 12V d.c. 15A, and audio 

and control applications. Switch positions indicated in window. 


30RSM3 C 

250V/15A, Rotary (3 On - 1 Off) - also suitable for 12V d.c. 15A, and audio 

and control applications. Switch positions indicated in window. 


30MCO A 250V/10A, Changeover, double throw (selects alternate circuits). 

30MI D 

30MBP E 

30MBPN F 

30MBPR G 

250V/10A, Intermediate - four terminals of 3.5mm ø accommodates 

2 x 2.5mm² cables. Body fi ts 22mm ø hole. 

440V/15A, Bell press - offers facility for momentary ON or OFF 

(one Looping terminal). 

250V/15A, Illuminated bell press - offers facility for momentary ON or 

OFF. Neon is connected across terminals 1 & 4. 

Alternative lamp voltages available. 

250V/10A, Bell press rocker - offers facility for momentary ON or OFF. 

Suitable for extra low voltage applications (one Looping terminal). 

30MD D 

250V/10A, 1 way, double pole, single throw - terminal bores of 4.1mm ø 



30HMD H 250V/10A, double pole, marked “HEAT”. 

30MD2 I 

30MD15 O 

30MD20 J 

30M15 A 

30M15RD B 

30M20 A 

30M35 N 

30TKM K 

30/1/2LM A 

30/1ELM P 

30/1NM L 

30/2NM L 

30/5M M 

250V/10A, 2 Way, double pole, double throw - six terminal bores of 4.1mm ø 

accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. M rating is 75. 

250V/15A, 1 way, double pole, single throw - terminal bores of 4.1mm ø 



250V/20A, 1 way, double pole - 4 terminals of 1.5mm ø accommodate 3 x 

2.5mm² cables. Body fi ts 34mm ø hole. M rating is 100. 

250V/15A, 1 way/2 way - terminal bores of 4.1mm ø accommodate 


250V/15A, 1 way/2 way (with red dolly mark)- terminal bores of 4.1mm ø 



250V/20A, 1 way/2 way - terminal bores of 4.1mm ø accommodate 4 x 

1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 90. 

250V/35A, 1 way/2 way - terminal bore of 3.6mm ø & Looping terminal 

bore of 3.9mm ø. M rating is 160. Marked 35A. 

250V/20A (5A fl uorescent load), 1 way/2 way, toggle key actuated - 

one Looping terminal. M rating is 100. 

250V/10A, 1 way (two Looping terminals) - terminal bores of 4.1mm ø 



250V/10A, 1 way (one Looping & one Earth terminal) - terminal bores of 

4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø 

hole. M rating is 100. 

250V/10A, 1 way rocker with neon indicator - neon can be wired to 

indicate ON, OFF or POWER AVAILABLE. Looping/switch terminal bores of 

4.1mm ø. Body fi ts 34mm ø hole (Note: Neutral required). 

250V/10A, 2 way rocker with neon indicator - neon can be wired to indicate 

ON, OFF or POWER AVAILABLE. Looping/switch terminal bores of 4.1mm ø. 

Body fi ts 34mm ø hole (Note: Neutral not required). 

250V/10A, 1 way/2 way (with 5 terminals - one Looping and one Earth terminal). 

Terminal bore of Common, Looping and Earth of 5.3mm ø accommodates 4 x 

2.5mm² cables. Terminal bore of ‘1’ and ‘2’ of 4.1mm ø accommodates 4 x 1.5mm² 

or 3 x 2.5mm² cables. Body fi ts 26mm ø hole. M rating is 40. 

Note: 30M Series products have fl uorescent capacity of approximately 5A. 30MD and 30MI are not recommended for switching of multiple 

fl uorescent fi ttings. 

A 

E 

C 

G 

K 

M 

O 

I 

35A 

P 

B 

F 

H 

J 

L 

N 

D 

30M 

30M15RD 

30RSM2 

30MBPR 

30TKM 

30/2NM 

30/5M

30 SERIES 

SWITCH MECHANISMS (Continued) 

NEON INDICATOR MECHANISMS 


30N-RED A 250V - neon indicator (RED) 

30N-COLOUR A 250V - neon indicator (OTHER COLOURS) 

Colours available are Blue, Green, Amber and Transparent. Other voltages are also available, including 6, 12, 24, 32, 48, 110 and 440. Suitable for DC loads. 

To order, add voltage to Cat. No. (for example, 30N12). Neons draw 250-275mW at 240V. Note: Inductive loads occasionally cause neons to glow in OFF 

position. To prevent this, place a 47kΩ, 0.5W 240V resistor across the terminals. Neutral and Active can be connected to either terminal. 

Labelled Switch Mechanisms 

Clipsal offers a broad range of labelled switch mechanisms for easy identifi cation when several switches are installed 

on the same switchplate or when there is any chance of confusion over the load controlled. 

10A MECHANISMS - WITH MESSAGES 


30FM A 

30HM B 

30EM C 

30LM D 

30MAM E 

30PM F 

30XM G 

30YM H 

30DNM I 

30FAM J 

30TM K 

30COM L 

30AUM M 

30ACM N 

30STM O 

250V/10A, 2 way (marked “FAN”) - terminal bores of 4.1mm ø accommodate 4 

x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 

250V/10A, 2 way (marked “HEAT”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “EXHAUST”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “LIGHT”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “MANUAL-AUTO”) - terminal bores of 4.1mm ø 

accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 

250V/10A, 2 way (marked “DISPOSAL”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “WASTE”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “WASH”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “DAY/NIGHT”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “FAMILY”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “T.V.”) - terminal bores of 4.1mm ø accommodate 4 x 


250V/10A, 2 way (marked “COOL”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “AUTO”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “AIR CON”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “STUDY”) - terminal bores of 4.1mm ø accommodate 


A 

C 

E 

G 

I 

K 

M 

O 

A 

B 

D 

F 

H 

J 

L 

N 

30N-RED 

30FM 

30HM 

30FAM 

30TM 

30COM 

57 

30 SERIES SWITCH MECHANISMS (Continued)

30 SERIES SWITCH MECHANISMS (Continued) 

58 

30 SERIES 


10A MECHANISMS - WITH MESSAGES (CONTINUED) 


30PUM P 

30BM Q 

30KM R 

30RUM S 

30LOM T 

30DM U 

30FNM V 

30AM W 

30BDM X 

30BD1M Y 

30BD2M Z 

30BD3M 1 

30BD4M 2 

30HLM 3 

30MSEN 4 

30MOS 5 

30MFR 6 

30MFD 7 

30MMW 8 

30MZ1 9 

250V/10A, 2 way (marked “PUMP”) - terminal bores of 4.1mm ø accommodate 4 


250V/10A, 2 way (marked “BATH”) - terminal bores of 4.1mm ø accommodate 4 x 


250V/10A, 2 way (marked “KITCHEN”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “RUMPUS”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “LOUNGE”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “DINE”) - terminal bores of 4.1mm ø accommodate 4 x 


250V/10A, 2 way (marked “OFF/ON”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “ALARM”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “BED”) - terminal bores of 4.1mm ø accommodate 4 x 


250V/10A, 2 way (marked “BED1”) - terminal bores of 4.1mm ø accommodate 4 x 








250V/10A, 2 way (marked “HI/LOW”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “SENSOR”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “OUTSIDE”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “FORWARD/REVERSE”) - terminal bores of 4.1mm ø 

accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 

250V/10A, 2 way (marked “FRIDGE”) - terminal bores of 4.1mm ø accommodate 


250V/10A, 2 way (marked “MICROWAVE”) - terminal bores of 4.1mm ø accommodate 4 


250V/10A, 2 way (marked “ZONE1”) - terminal bores of 4.1mm ø accommodate 4 


P 

R 

T 

V 

X 

Z 

2 

4 

6 

8 

Q 

S 

U 

W 

Y 

1 

3 

5 

7 

9 

30KM 

30LOM 

30FNM 

30HLM 

30MSEN 

30MOS 

30MZ1

30 SERIES 


10A MECHANISMS - WITH MESSAGES (CONTINUED) 


30MZ2 10 

30MZ3 11 

30MZ4 12 

39M 13 

39MAOM 14 

39MSON 15 

250V/10A, 2 way (marked “ZONE2”)- terminal bores of 4.1mm ø 

accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø 


250V/10A, 2 way (marked “ZONE3”) - terminal bores of 4.1mm ø 



250V/10A, 2 way (marked “ZONE4”) - terminal bores of 4.1mm ø 



250V/10A, 3 Position - marked “HI-OFF-LO”. Three terminals, 3.5mm 

ø accommodate 2 x 2.5mm² cables. 

250V/10A, 3 Position - marked “MAN-OFF-AUTO”. Three terminals, 

3.5mm ø accommodate 2 x 2.5mm² cables. 

250V/10A, 3 Position - marked “SENSOR-OFF-ON”. Three terminals, 

3.5mm ø accommodate 2 x 2.5mm² cables. 



30M16SEN A 

30M16OS B 

30M16FR C 

30M16FD D 

30M16MW E 

250V/16A, 2 way (marked “SENSOR”) - terminal bores of 4.1mm ø 



250V/16A, 2 way (marked “OUTSIDE”) - terminal bores of 4.1mm 

ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø 


250V/16A, 2 way (marked “FORWARD/REVERSE”) - terminal bores 

of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 

22mm ø hole. M rating is 100. 

250V/16A, 2 way (marked “FRIDGE”) - terminal bores of 4.1mm ø 



250V/16A, 2 way (marked “MICROWAVE”) - terminal bores of 4.1mm 

ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø 




30M20HW A 

250V/20A, 2 way (marked “HOT WATER SERVICE”) - terminal bores 

of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 

22mm ø hole. M rating is 100. 



30M35HOB A 

30M35OV B 

30M35R C 

250V/35A, 2 way (marked “HOB”) - terminal bores of 4.1mm ø 



250V/35A, 2 way (marked “OVEN”) - terminal bores of 4.1mm ø 



250V/35A, 2 way (marked “RANGE”) - terminal bores of 4.1mm ø 



35A 

35A 

10 

12 

14 

A 

C 

E 

20A 

A 

C 

A 

35A 

11 

13 

15 

B 

D 

B 

30MZ2 

39MAOM 

16A 

30M16SEN 

16A 

30M16OS 

20A 

30M20HW 

30M35OV 

35A 

59 

30 SERIES SWITCH MECHANISMS (Continued)

30 SERIES SWITCH MECHANISMS (Continued) 

60 

30 SERIES 


10A ILLUMINATED ROCKER SWITCH MECHANISMS - WITH MESSAGES 


30/2NMSEN A 

30/2NMOS B 

250V/10A - 2 way inbuilt neon (marked “SENSOR”). Neon can be 

wired to indicate ON, OFF or POWER AVAILABLE. Looping/switch 

terminals of bore 3.9mm ø. Body fi ts 34mm ø hole. 

250V/10A - 2 way inbuilt neon (marked “OUTSIDE”). Neon can be 

wired to indicate ON, OFF or POWER AVAILABLE. Looping/switch 

terminals of bore 3.9mm ø. Body fi ts 34mm ø hole. 

Note: Neutral is not required. 

Additional messages available. Contact your CLIPSAL offi ce for details. 

Typical messages:- RANGE - HEAT/COOL - RESET - LIVING - HI/LO - SPA - DAY NIGHT - HWS - LO - OFF - ON. 

DIMMER, FAN CONTROL AND SURGE FILTER MECHANISMS 


32E450LM A 

32E450TM A 

C-Thru ® Dimmer Mechanism, Leading Edge (suits incandescent 

lighting and low voltage lighting using iron core transformers), 220 

- 240V/450W. 

C-Thru ® Dimmer Mechanism, Trailing Edge (suits incandescent 

lighting and low voltage lighting using electronic transformers), 220 

- 240V/450W. 

32E500FM A C-Thru ® Fan Speed Controller Mechanism, 220-240V/500W. 

30POTDM B 

30POTFM C 

Dimmer Potentiometer (suits products such as 32 Series High 

Powered Dimmers, 780 Series and the 761 Series). 

Fan Controller Potentiometer (suits products such as 32 Series High 

Powered Dimmers & 761 Series). 

30SFM D Surge Filter Mechanism - 250V 10A 

CIRCUIT IDENTIFICATION AND BLANKING PRODUCTS 


30P A Removable Blank Plug, to suit or blank out 30 Series aperture. 

30PID B 

Removable Plug, with identifi cation facility, supplied with tamper 

proof transparent cover. 

30PFO C Plug, marked “FRIDGE - FREEZER ONLY”. 

30PIDA4L D Label Sheets, 10 x A4 packet, red and white available (non-adhesive). 

SURGE 

PROTECTED 

WHEN LIT 

B 

C 

D 

A 

A 

A 

B 

C 

D 

B 

30/2NMSEN 

32E450LM 

32E450TM 

32E500FM 

30POTFM 

30SFM 

30P 

30PID

One-Way Mechanism with Neon Indicator 

L 

SCHEMATIC WIRING DIAGRAMS 

1 

ACTIVE 

C 

1 

To wire neon permanently “ON” 

To wire neon “ON” when switch “OFF” To wire neon “ON” when switch “ON” 

One-Way/Two-Way Mechanism with Neon Indicator 

NEON 

LOOP 

COMMON 

LOOP 

ACTIVE 

NEON TAIL 

COMMON 

COMMON 

2 

1 

ACTIVE 

ACTIVE 

LOOP 

LOAD 

1 WAY 

2 WAY 

LOOP 

1 

NEON 

NEON 

COMMON 

COMMON 

1 

2 

2 

1 

NEON TAIL 

LOAD 

CONNECTOR 

ACTIVE 

NEUTRAL 

NEUTRAL 

ACTIVE 

NEUTRAL 

ACTIVE 

LOOP 

LOOP 

NEON 

LOOP 

To wire neon “ON” when LOAD “ON” 

LOOP LOOP 

To wire neon “ON” when LOAD “OFF” 

To wire neon permanently “ON” 

LOOP 

COMMON 

1 

COMMON 

COMMON 

COMMON 

COMMON 

2 

1 

2 

1 

2 

1 

LOAD 

LOAD 

1 

2 WAY 

1 WAY 

LOAD 

TO NEUTRAL 

TO NEUTRAL 

LOAD 

30/1NM 

30/2NM 

61 

SCHEMATIC WIRING DIAGRAMS

SCHEMATIC WIRING DIAGRAMS (Continued) 

62 

LOOP 


One-Way/Two-Way Mechanisms 

2 

1 

EARTH 

LOOP 

COMMON 

2-WAY 

1-WAY 

ACTIVE 

30M 

30M15 

30M20 

30M35 

2-WAY 

1-WAY 

30/1/2LM 

30/1ELM 

ACTIVE 1-WAY 

COMMON 1 

30/5M 

30/5M15 

Double Pole Mechanisms 20A 

LOAD 

2-WAY ACTIVE 

LOAD 

2 

COMMON 

1 

ACTIVE 

LOOP 

EARTH 

LOOP 

1 

COMMON 

COMMON 

2 

1 

LOAD 

LOAD 

30MD2 30MD20 

1-WAY 

ACTIVE 

LOOP 

LOOP 

1 

COMMON 

ACTIVE 

ACTIVE LOAD 

LOAD 

ACTIVE 

LOOP 

LOOP 

LOAD 

LOAD 

30MD 

30MD15


Rotary Switch Mechanisms 

ACTIVE 

Intermediate Mechanism 

Changeover Mechanism 

CIRCUIT 1 

TO 2 WAY SWITCH 

LOAD 2 

LOAD 1 


30RSM2 30RSM3 

Position 1 (Up) 

1 

1 

2 3 

Position 2 (Down) 

1 

2 3 

3 

4 

2 

ACTIVE 


4 

4 


TO 2 WAY SWITCH TO 2 WAY SWITCH 

CIRCUIT 2 

CIRCUIT 1 CIRCUIT 2 

LOAD 3 

LOAD 2 

LOAD 1 

30MI 

30MCO 

63 

SCHEMATIC WIRING DIAGRAMS (Continued)


64 


Three Position Switch Mechanisms 

C-Thru ® Light Dimmer/Fan Controller 

ACTIVE 

High Power Dimmers 

ACTIVE 

AUTO SWITCH WIRE 

32E450L Series 

32E450T Series 

MANUAL SWITCH WIRE 

One Way Switching Two Way Switching 

One Way Switching Two Way Switching 

39M 

32E500F 


Note: All C-Thru ® NEUTRAL 

dimmer plate variants are supplied with a 30/1/2LM switch mechanism. This mech is designed to be reconfi gurable: 

DEFAULT STATE: 1-WAY WITH TWO LOOPING TERMINALS (marked “LOOP” and “2” above). 

ALTERNATE STATE: 2-WAY WITH ONE LOOPING TERMINAL (which is marked “LOOP” above). 

To change over, remove terminal screws and interchange “2” and “LOOP” terminal poles/contacts. Reinsert screws and terminate wiring as usual. 

31E1000L 

31E800T 

LOAD 

ACTIVE 

2-WAY 

LOOP 

C 

1 

LOOP 

2 

301/2LM SWITCH MECH 

DIMMER OR 

FAN CONTROL 

LOOP COMMON 

LOAD 

LOAD 

NEUTRAL 

ACTIVE 

COMMON 

LOOP 

ACTIVE 

NEUTRAL 

31E1000L 

31E800T 

LOAD 

OFF 

ACTIVE 

2-WAY 

LOOP 

C 

1 

LOOP 

2 

301/2LM SWITCH MECH 

DIMMER OR 

FAN CONTROL 

LOAD 

LOAD 

31E1000L 

31E800T 

NEUTRAL 

ACTIVE 

ADDITIONAL 

SWITCH


3-Speed Capacitive Fan Controller 

ACTIVE 

NEUTRAL 

Combined Light Switch and Time Delay for Fans 

Push-Button Electronic Time Delay Switch 

No Voltage Relay Switched Sockets 

A N 

E 

ACTIVE 

NEUTRAL 

ACTIVE 

NEUTRAL 

COMMON 

31VETF 

31VETR or 

2031VETR 

NEUTRAL 

ACTIVE 

FAN 

LAMP 

ACTIVE 

LOAD 

LOOP 

REMOTE 

ACTIVE 

SUPPLY 

CONDUCTORS 

NEUTRAL 

EARTH 

PUSH TO 

RESET BUTTON 

4 

2 1 

3 PUSH 

CONTROLLER 

OFF 

HIGH 

MED 

LOW 

CAPACITOR PACK 

LAMP 

Note: Not suitable for use with fl uorescent loads. 

NO VOLT 

RELAY 

A 

LOAD 

REMOTE 

CONTROL 

MOMENTARY 

PUSH-BUTTONS 

(OPTIONAL) 

E 

SWITCHED 

SOCKET 

N 

31VF3CA 

31VF3CB 

31VETF 

31VETR 

15X15RZ 

65 



66 


Automatic Socket 

A 

E 

Standard Pattern Mounting, 

Single Gang 

Inline Base 

A 

Switched Socket with 

One Extra Switch 

Switched Socket with 

Two Extra Switches 

E 

N 

A 

A 

N 

E 

N 

E 

N 

NEUTRAL 

EARTH 

Round Base 

A 

A 

E 

N 

E 

N 

ACTIVE 

A 

E 

N 

A 

EARTH 

ACTIVE 

E 

NEUTRAL 

EARTH 

ACTIVE 

NEUTRAL 

N 

L 

A 

1 

LOAD 

T 

C 

SUPPLY 

CONDUCTORS 

A 

2 

LOAD 

LOOP 

1 C 

LOOP 

LOAD 

2 

C 

E 

E 

N 

N 

A 

E 

N 

15 

15/2 

15X 

15XX 

EARTH 

NEUTRAL 

ACTIVE 

10 

15V 

A 

SUPPLY 

CONDUCTORS 

15VX 

15VXX 

E 

N


Standard Pattern Mounting 

Twin Combination 25 25V 

N 

A 

N 

E 

E 

N 

A 

Twin Switched Sockets 

with Extra Switch 

E 

NEUTRAL 

EARTH 

ACTIVE 

Double Pole Twin Switched Sockets 

Earth Leakage Protected 

Twin Switched Sockets 

A 

SUPPLY 

CONDUCTORS 

LOOP 

TO LOAD 

2 

1 

C 

A 

SUPPLY 

CONDUCTORS 

NEUTRAL 

ACTIVE 

EARTH 

E 

N 

SUPPLY 

CONDUCTORS 

ELECTRONIC 

RESET 

ACTIVE 

CONDUCTORS 

A 

EARTH 

ACTIVE 

NEUTRAL 

N 

A 

E 

N 

RESET 

BUTTON 

TRIP 

SOLENOID 

EARTH 

NEUTRAL 

ACTIVE 

A N 

A N 

E 

N 

SUPPLY 

CONDUCTORS 

E 

A 

E 

EARTH 

LOAD 

N 

A 

E 

A 

CONTINUATION 

TERMINALS 

N 

25XA 

TO OTHER 

OUTLETS 

NEUTRAL 

EARTH 

SUPPLY 

CONDUCTORS 

ACTIVE 

A 

25VXA 

25D 

E 

N 

25EL Series 

67 


ARCHITRAVE AND STANDARD SIZE SWITCHPLATES - MOUNTING TEMPLATES 

68 

ARCHITRAVE AND STANDARD SIZE SWITCHPLATES 

- MOUNTING TEMPLATES 

75mm 

30 

31 

STANDARD SIZE SWITCHPLATES 

- MOUNTING TEMPLATES 

115mm 84mm 

22mm Ø 

32mm 

55mm 

73mm 

69mm 

85mm 

27mm 

22mm Ø 

32mm 

32A 

32 

70mm 

113mm 

26mm 

26mm 

22mm Ø 

32mm 

33A 

33 

9mm 

11mm 

97mm 

76mm 

140mm 

25mm 

25mm 

25mm 

34A 

34 

Maximum 

Cut-Out Size 

52mm 

22mm Ø 

32mm 

124mm 

MAXIMUM 

CLEARANCE 

AREA

STANDARD RANGE 

QUICK REFERENCE GUIDE 

69 

STANDARD RANGE QUICK REFERENCE GUIDE

STANDARD RANGE QUICK REFERENCE GUIDE 

70 

STANDARD RANGE QUICK REFERENCE GUIDE 

STANDARD SIZE FLUSH SWITCHES - 250V/10A, HORIZONTAL MOUNTING, 1 WAY/2 WAY 

Cat No Description Length Width Depth Mounting Centres PAGE 

31HA 1 Gang Switch. 115mm 73mm 11mm 84mm apart 13 




STANDARD SIZE FLUSH SWITCHES - 250V/10A, VERTICAL MOUNTING, 1 WAY/2 WAY 

31VA 1 Gang Switch. 115mm 73mm 11mm 84mm apart 13 






ARCHITRAVE SIZE FLUSH SWITCHES - 250V 

30 1 Gang Switch, 10A, 1 way/2 way. 75mm 32mm 10mm 55mm apart 14 

30D 1 Gang Switch, 10A, 1 way, double pole. 75mm 32mm 10mm 55mm apart 14 

30/15 1 Gang Switch, 15A, 1 way/2 way. 75mm 32mm 10mm 55mm apart 14 

30D15 1 Gang Switch, 15A, 1 way, double pole. 75mm 32mm 10mm 55mm apart 14 

39 1 Gang Switch, 10A, 1 way/2 way, 3 position - Low/OFF/High. 75mm 32mm 33mm 54.3mm apart 14 

30DD 1 Gang Switch, 10A, 1 way, double pole, deep plate. 77mm 32mm 18mm 55mm apart 14 

32A 2 Gang Switch, 10A, 1 way/2 way. 85mm 32mm 10mm 70mm apart 14 



MINIATURE ARCHITRAVE SWITCHES - 250V/10A, 1 WAY/2 WAY 

30T 1 Gang Switch. 54mm 27mm 10mm 40mm apart 14 

32TA 2 Gang Switch. 75mm 27mm 10mm 60mm apart 14 

33TA 3 Gang Switch. 98mm 27mm 10mm 83mm apart 14 

INTERMEDIATE SIZE SWITCHES - 250V/10A, 1 WAY/2 WAY (94mm x 48mm at centre) 

31BA 1 Gang Switch. 95mm 48mm 10mm 55mm apart 15 

32BA 2 Gang Switch. 95mm 48mm 10mm 55mm apart 15 

31BLA 1 Gang Switch. 95mm 48mm 10mm 78mm apart 15 

32BLA 2 Gang Switch. 95mm 48mm 10mm 78mm apart 15 

LARGE FORMAT SIZE FLUSH SWITCHES - 250V/10A, 1 WAY/2 WAY, VERTICAL MOUNTING 

31/2VA 1 Gang Switch. 116mm 116mm 11mm 84 x 46mm 15 









STANDARD SIZE FLUSH PLATES 

31VH 1 Gang. 115mm 73mm 11mm 84mm apart 16 






31VX Blank Flush Plate. 115mm 73mm 11mm 84mm apart 16 

31VXCB Blank Flush Plate. With 30A terminal block. 115mm 73mm 11mm 84mm apart 16

STANDARD RANGE QUICK REFERENCE GUIDE (Continued) 

ARCHITRAVE SIZE FLUSH PLATES 


31 1 Gang. 75mm 32mm 11mm 55mm apart 16 

31D 1 Gang, deep. 75mm 32mm 18mm 55mm apart 16 




MINIATURE ARCHITRAVE SIZE FLUSH PLATES 

31T 1 Gang. 54mm 27mm 10mm 40mm apart 17 



INTERMEDIATE SIZE FLUSH PLATES 

31B 1 Gang. 95mm 48mm 10mm 55mm apart 17 

32B 2 Gang. 95mm 48mm 10mm 55mm apart 17 

31BL 1 Gang, with large mounting centres. 95mm 48mm 10mm 78mm apart 17 

32BL 12 Gang, with large mounting centres. 95mm 48mm 10mm 78mm apart 17 

LARGE FORMAT SIZE FLUSH PLATES - VERTICAL MOUNTING 

31/2V 1 Gang. 116mm 116mm 11mm 84mm x 46mm 17 









31/2VX 2 Gang Blank Flush Plate. 116mm 116mm 11mm 84mm x 46mm 17 

31/3VX 3 Gang Blank Flush Plate. 162mm 115mm 11mm 84mm x 46mm 17 

SKIRTING SIZE FLUSH PLATES 

31BMF 1 Gang. 99mm 45mm 18mm 78mm apart 18 



JUNCTION BOX MOUNTED FLUSH PLATE 

31VR Round Plate, suits J-Box Mounting (70mm diameter). 70mm Ø 24mm 50mm 18 

TELEPHONE / DATA OUTLET PLATE 

31VRJ Data Outlet Plate, with Cat 3 RJ45 socket. 115mm 73mm 11mm 84mm 18 

IP54 RATED WEATHERPROOF FLUSH SWITCH 

31VHWP 1 Gang Weatherproof Switch Plate, (IP54 rated). 115mm 73mm 11mm 84mm apart 18 


32E450L C-Thru ® Light Dimmer, Leading Edge, 220-240V/450W. 115mm 73mm 

32E450T C-Thru ® Light Dimmer, Trailing Edge, 220-240V/450W. 115mm 73mm 

32E450LM C-Thru ® Light Dimmer Mechanism, Leading Edge, 220-240V/450W. 22mm 22mm 

32E450TM C-Thru ® Light Dimmer Mechanism, Leading Edge, 220-240V/450W. 22mm 22mm 

HIGH POWER SERIES LIGHT DIMMERS 

31E800T Trailing Edge Light Dimmer, 250V/800VA (suits electronic transformers). 115mm 73mm 

31E1000L Leading Edge Light Dimmer, 2 50V/1000VA (suits incandescent & iron core trans.). 115mm 73mm 

32/1000 Incandescent & Low Voltage Remote Light Dimmer, 250V/1000VA. 115mm 73mm 

32/2400 Incandescent & Low Voltage Remote Light Dimmer, 250V/2400VA. 115mm 73mm 

11mm - plate 

13mm - knob 


11mm - plate 

13mm - knob 


84mm apart 20 

84mm apart 20 

13mm - plate 

41mm - wall recess N/A 20 

13mm - plate 


15mm - plate 

11mm - knob 


15mm - plate 

11mm - knob 


11mm - plate 

13mm - knob 


11mm - plate 

13mm - knob 


84mm apart 20 

84mm apart 20 

84mm apart 20 

84mm apart 20 

71 

STANDARD RANGE QUICK REFERENCE GUIDE (Continued)


72 


FILTER MODULE 


32EIND Inductor Filter Module, for use with electronic transformers 96m 70mm 48mm 73mm apart 20 

C-THRU ® FAN SPEED CONTROLLER 

32E500F C-Thru ® Fan Controller, 220-240V/500W. 115mm 73mm 

32E500FM C-Thru ® Fan Controller Mechanism, 220-240V/500W. 22mm 22mm 

FAN SPEED CONTROLLER FOR “AIRFLOW” ACES36AL & ACES48AL 

31VF3CA 3 Speed Fan Controller, 100VA, suitable for use with Airfl ow ACES36AL & ACES48AL. 115mm 73mm 

31VF3CB 3 Speed Fan Controller, 100VA, suitable for Airfl ow ACES56AL and AFLR48. 115mm 73mm 

ELECTRONIC TIMER CONTROLS - 250V/10A 

11mm - plate 

13mm - knob 


84mm apart 20 

13mm - plate 


11mm - plate 

14mm - knob 


11mm - plate 

14mm - knob 


84mm apart 21 

84mm apart 21 

31VETR 254 minutes, 2 wire. 115mm 73mm 11mm 84mm apart 21 

31VETR3 15 hours, 3 wire. 115mm 73mm 11mm 84mm apart 21 

31VETF 10 minutes, fans/lights. 115mm 73mm 11mm 84mm apart 21 

PNEUMATIC TIME DELAY SWITCHES 

319 Time Delay Switch. 115mm 73mm 11mm 84mm apart 22 

319RA Time Delay Switch, reverse action. 115mm 73mm 11mm 84mm apart 22 

319N Time Delay Switch with Neon. 115mm 73mm 11mm 84mm apart 22 

319HP Time Delay Switch, Weatherproof/Hose Proof. 115mm 73mm 11mm 84mm apart 22 

319X Time Delay Switch with Extra Switch. 115mm 73mm 11mm 84mm apart 22 

ANALOGUE TIMER CONTROLS 

TC15/24 24 Hour Timer, Single Power Outlet, 250V/10A (with safety shutter). 121mm 79mm 42mm 84mm apart 22 

TC15/15/24 24 Hour Timer, Single Socket Outlet, 250V/15A (with safety shutter). 121mm 79mm 42mm 84mm apart 22 

TC15/15/7D 7 Day Timer, Single Power Outlet, 250V/15A (with safety shutter). 121mm 79mm 42mm 84mm apart 22 

TC32V1 1 Hour Timer, Flush Switch, 250V/15A. 115mm 73mm 62mm 84mm apart 22 

TC32V24 24 Hour Timer, Flush Switch, 250V/15A. 115mm 73mm 62mm 84mm apart 22 

TC32V7D 7 Day Timer, Flush Switch, 250V/15A. 115mm 73mm 62mm 84mm apart 22 

TC475/24 24 Hour Timer, Portable Dual Switch Socket. 160mm 130mm 120mm N/A 22 

SUNSET SWITCH 

31VSSR Sunset Switch, 250V/10A, 16 hours, 2 wire, IP56 (standard size). 115mm 74mm 50mm 84mm apart 23 

BOOSTER ELEMENT RELAY 

31VBER Booster Relay for Solar Hot Water Element, 250V/15A. 115mm 73mm 


plate - 16mm 

button - 4.5 


84mm apart 23 

780/1 Switch Multiplier, 250V/10A, 1 way. 96mm 70mm 48mm 73mm apart 23 

780/2 Switch Multiplier, 250V/10A, 2 way. 96mm 70mm 48mm 73mm apart 23 

780K1 Switch Multiplier, 250V/10A, 1 way (with 2 gang architrave switch assembly). 96mm 70mm 48mm 73mm apart 23 

780K2 Switch Multiplier Mechanism, 250V/10A, 2 way. 96mm 70mm 48mm 73mm apart 23 

780M Switch Multiplier Mechanism, 250V/10A. N/A N/A N/A N/A 23 

780A2M Switch Multiplier Mechanism (suits 2 loads 2 way type A bias). N/A N/A N/A N/A 23 

780B2M Switch Multiplier Mechanism (suits 2 loads 2 way type B bias). N/A N/A N/A N/A 23 

UNDER VOLTAGE RELAYS 

15X15RZ Single Power Outlet, 250V/15A (with no volt relay and reset switch). 115mm 73mm 11mm 84mm apart 24 

15XRZ Single Power Outlet, 250V/10A (with no volt relay and reset switch). 115mm 73mm 11mm 84mm apart 24 

32VRZ No Volt Relay and Reset Switch, 250V/10A (standard size). 115mm 73mm 11mm 84mm apart 24 

32VRZ15 No Volt Relay and Reset Switch, 250V/15A (standard size). 115mm 73mm 11mm 84mm apart 24


KEY TAG TYPE SWITCHES - 250V a.c. 


36VKT3N Key Tag Switch, suits 3x20A, 1/2way circuit with neon. 115mm 73mm 11mm 84mm apart 25 

36VKT3NX Key Tag Switch, suits 3x20A, 1/2way circuit, neon, extra 250V a.c. 10A switch mech. 115mm 73mm 11mm 84mm apart 25 

36VKT4 Key Tag Type Switch, suits 4x20A, 1/2way circuits. 115mm 73mm 11mm 84mm apart 25 

36VKT4X Key Tag Type Switch, suits 4x20A, 1/2way circuits, extra 10A 250V a.c. switch mech. 115mm 73mm 11mm 84mm apart 25 

KEY TAG ONLY 

35VKT Key Tag, suits 35VKT series switches. 120mm 45mm 5mm N/A 25 

2034VKT Short Key Tag, suits 2034VKT series switches. 92mm 40mm 7mm N/A 25 

KEY OPERATED SWITCHES - 250V, 20A/16AX 

31VK1 Key Operated Switch, 1 way (locks in Off position). 115mm 73mm 11mm 84mm apart 25 

31VK1/2 Key Operated Switch, 2 way (locks in Off position). 115mm 73mm 11mm 84mm apart 25 

31VK2 Key Operated Switch, 1 way (locks in On and Off position). 115mm 73mm 11mm 84mm apart 25 

31VK2/2 Key Operated Switch, 2 way (locks in On and Off position). 115mm 73mm 11mm 84mm apart 25 

COMMON KEYED SWITCHES 

31VK1CK Key Operated Switch, 250V 20A/16AX, 1 way (locks in Off position). 115mm 73mm 11mm 84mm apart 25 

31VK1/2CK Key Operated Switch, 250V 20A/16AX, 2 way (locks in Off position). 115mm 73mm 11mm 84mm apart 25 

31VK2CK Key Operated Switch, 250V 20A/16AX, 1 way (locks in On and Off position). 115mm 73mm 11mm 84mm apart 25 

31VK2/2CK Key Operated Switch, 250V 20A/16AX, 2 way (locks in On and Off position). 115mm 73mm 11mm 84mm apart 25 

CEILING SWITCHES 

306 Ceiling Switch, 250V/15A, 1 way. 52mm Ø 71mm 39mm 26 




WILCO CEILING SWITCH 

PC1 Ceiling Switch, pull cord, 10A, double pole with indicator. 57mm 45mm 18mm 30mm x 28mm 26 

FOOT OPERATED SWITCH 

360 Foot Operated Switch, 250V/10A, double pole. 93mm 55mm 29mm 68 x 18mm apart 26 

AMERICAN STYLE FLUSH SWITCHES AND PLATES - INDIRECT MOUNTING 

321 1 Gang Switch Plate. 115mm 70mm 8mm 60mm apart 27 

321R Switch Plate, suits one socket. 115mm 70mm 8mm 60mm apart 27 

322/1R Switch Plate, suits 1 switch and 1 socket. 116mm 116mm 8mm 60 x 46mm 27 

320 Switch Mechanism, 250V a.c./10A, 1 way. 93mm 35mm 84mm apart 27 

320/15 Switch Mechanism, 250V a.c./15A, 1way. 93mm 35mm 84mm apart 27 

DC3 Flush Switch, 5A, 3 terminal, 1 way, d.c. (with mounting lugs). 93mm 35mm 36mm 84mm apart 27 

DC3-SPDT Flush Switch, 5A, 3 terminal, single pole/double throw, d.c. (with mounting lugs). 93mm 35mm 36mm 84mm apart 27 

WSW110 Flush Switch, 10A, 1 way. 93mm 35mm 32mm 84mm apart 27 

WSW110/TW Flush Switch, 10A, 2 way. 93mm 35mm 32mm 84mm apart 27 

WSW116 Flush Switch, 16A, 1 way. 93mm 35mm 32mm 84mm apart 27 

WSW116/TW Flush Switch, 16A, 2 way. 93mm 35mm 32mm 84mm apart 27 

FS169/I Flush Switch, 10A, intermediate (with mounting lugs). 93mm 35mm 22mm 84mm apart 27 

FS169/15DPDT Flush Switch, 15A, intermediate, double pole/double throw (with mounting lugs). 93mm 35mm 22mm 84mm apart 27 

WILCO SURFACE SWITCH 

SS165/15/2 Surface Switch, 15A, 2 way, 3 terminal, screw secured cover (52mm diameter). 52mm Ø 17mm 36mm apart 28 

SURFACE SWITCHES - 250V 

362 Surface Switch, 10A, 1 way, 3 terminal. 60mm Ø 19mm 48mm apart 28 

362/15 Surface Switch, 15A, 1 way, 3 terminal. 60mm Ø 19mm 48mm apart 28 

363 Surface Switch, 10A, 2 way, 4 terminal. 60mm Ø 19mm 48mm apart 28 

389 Surface Switch, 25A a.c., 32V d.c., 1 way. 61mm Ø 27mm 43mm apart 28 

BELL PRESS 

98 Bell Press, illuminated. 60mm 25mm 19mm 48mm apart 28 

73 



74 


WILCO PUSH BUTTON SWITCHES - WITH COLLAR AND LOCKNUT 


PBS136 2A, single pole. 28mm 15mm 

PBS236 2A double pole. 28mm 15mm 

PUSH BUTTON WEATHERPROTECTED 1P53 SURFACE SWITCHES - 1 GANG, SINGLE POLE 

28mm 

(Room protrusion - 18mm) 

34mm 

(Room protrusion - 18mm) 

N/A 28 

N/A 28 

WPBSW110 10A, 1 way/2 way. 60mm 35mm 32mm 28 

WPBSW116 16A, 1 way/2 way. 60mm 35mm 32mm 28 

CIRCUIT IDENTIFICATION PRODUCTS 

30P Removable Blank Plug, suits 30 series. 21mm 21mm 10mm 29 

30PFO Plug, marked “FRIDGE - FREEZER ONLY”. 21mm 21mm 10mm 29 

30PID 30 Series ID Circuit Plug, tamper proof. 21mm 21mm 7mm 29 

30PIDA4L Label Sheets, 10 x A4 packet (RD, BU, GR, YL, WE colours available). N/A N/A N/A N/A 29 

9 Cap, suits switch plate screw recesses. 8mm Ø 5mm N/A 29 

9SERIES Identi, caps for circuit identifi cation. 8mm Ø 5mm N/A 29 

MOUNTING ACCESSORIES 

ET30 Screw Mounting Earthing Terminal. 6mm N/A N/A N/A 29 

B30GFZ Mounting Clip with Moulded Surround. 45mm 27mm 11mm 24mm apart 29 

F30Z1 Mounting Clip Mechanism, suits 1mm thick sheet. 29mm 29mm N/A N/A 29 

F30Z1.5 Mounting Clip Mechanism, suits 1.5mm thick sheet. 29mm 29mm N/A N/A 29 

F30Z2 Mounting Clip Mechanism, suits 2mm thick sheet. 29mm 29mm N/A N/A 29 

F30Z4 Mounting Clip Mechanism, suits 4m thick sheet. 29mm 29mm N/A N/A 29 

31/3F Three Gang Mounting Flange. 162mm 116mm 11mm 92mm apart 29 


31VXCB Blank Plate with 30A Connector Block. 115mm 73mm 11mm 84mm apart 30 

32VA15/38TB 30M15 Mech and 38TB Terminal Block in Standard Size Plate. 115mm 73mm 11mm 84mm apart 30 

38 Grommet, suits up to 2.5mm2 ordinary duty fl ex cord. 22mm Ø N/A 30 

38A Grommet, suits up to 1.5mm2 ordinary duty fl ex cord. 22mm Ø N/A 30 

38X Grommet, suits up to 1mm2 ordinary duty fl ex cord. 22mm Ø N/A 30 

38Y Grommet, suits fi gure 8 two core fl ex cord. 22mm Ø N/A 30 

38Z Grommet, suits up to 0.75mm2 light duty fl ex cord. 22mm Ø N/A 30 

38HD Grommet, suits up to 2.5mm2 ordinary duty with clamp. 25mm 21mm 30mm N/A 30 

38TB Cord Outlet Terminal Block with Grommet, suits 30 Series plates. 32mm 22mm N/A 30 

PROTECTED SWITCH - 250V, MOULDED, 1 WAY/2 WAY 

PSM110 10A. 75mm 46mm 51mm 69mm apart 31 

PSM115 15A. 75mm 46mm 51mm 69mm apart 31 


PS110 Single pole. 79mm 51mm 50mm 37mm apart 31 

PS110-DC Single pole, d.c. operation. 79mm 51mm 50mm 37mm apart 31 

PS110-DP Double pole. 79mm 51mm 50mm 37mm apart 31 

PS110-I Single pole, intermediate. 79mm 51mm 50mm 37mm apart 31 

PS110-N Single pole, with neon. 79mm 51mm 50mm 37mm apart 31 

PS110-TW Single pole, 2 way. 79mm 51mm 50mm 37mm apart 31 

PS110-2 Single pole, two gang. 101mm 79mm 50mm 82mm apart 31 

PS110-2DP Double pole, two gang. 101mm 79mm 50mm 82mm apart 31 

PS1102I Single pole, two gang, intermediate. 101mm 79mm 50mm 82mm apart 31 

PROTECTED SWITCHES - 250V, 16A, ZINC DIE CAST, SINGLE POLE 

PS116 Single pole. 80mm 51mm 50mm 38mm apart 31 

PS116/TW Two gang. 80mm 51mm 50mm 38mm apart 31 

PS116/2 2 way. 101mm 80mm 50mm 82mm apart 31


STANDARD SIZE SINGLE AUTOMATICALLY SWITCHED SOCKET OUTLETS - HORIZONTALLY MOUNTED 


10 10A, single pole. 115mm 73mm 16mm 84mm apart 33 

10D 10A, double pole. 115mm 73mm 16mm 84mm apart 33 

10DS 10A, double pole with safety shutters. 115mm 73mm 16mm 84mm apart 33 

10DN 10A, double pole with safety shutters & neon. 115mm 73mm 16mm 84mm apart 33 

10DLS 10A, round earth, double pole with safety shutter. 115mm 73mm 16mm 84mm apart 33 

10D15S 15A, double pole with safety shutter. 115mm 73mm 16mm 84mm apart 33 

10DWP 10A, double pole fl ush weather proof. 93mm 82mm 12mm 70 x 54mm 33 

10DWP15 15A, double pole fl ush weather proof. 93mm 82mm 12mm 70 x 54mm 33 

415VF 10A, double pole with fl ap, IP34 rating. 101mm 80mm 37mm 76 x 65mm 33 

415VF15 15A, double pole with fl ap, IP34 rating. 101mm 80mm 37mm 76 x 65mm 33 

10PL 10A, single pole with security fl ap. 115mm 73mm 22mm 84mm apart 33 

STANDARD SIZE TWIN AUTOMATICALLY SWITCHED SOCKET OUTLETS - 10A, HORIZONTALLY MOUNTED 

20 Single pole. 115mm 73mm 16mm 84mm apart 34 

20D Double pole. 115mm 73mm 16mm 84mm apart 34 

20DS Double pole with safety shutters. 115mm 73mm 16mm 84mm apart 34 

20DN Double pole with safety shutters & neons. 115mm 73mm 16mm 84mm apart 34 

20DLS Round earth, double pole & safety shutters. 115mm 73mm 16mm 84mm apart 34 

SKIRTING MOUNTED SINGLE AUTOMATICALLY SWITCHED SOCKET OUTLET 

11 Single Auto Switched Socket Outlet, skirting mounted, 10A, single pole, 99 x 45mm at centre. 95mm 45mm 17mm 78mm apart 34 

SKIRTING MOUNTED TWIN AUTOMATICALLY SWITCHED SOCKET OUTLETS - 10A 

11/2 Single pole. 125mm 50mm 17mm 104mm apart 34 

11/2MF Single pole to suit ducting. 125mm 50mm 17mm 104mm apart 34 

11/2MFN Single pole, safety shutters, neons, suits ducting. 125mm 50mm 17mm 104mm apart 34 

AUTOMATICALLY SWITCHED SOCKET OUTLETS - SINGLE 

10M 10A, single pole. 97mm 43mm 29mm 84mm apart 35 

10MD 10A, double pole. 97mm 43mm 29mm 84mm apart 35 

10MDS 10A, double pole with safety shutter. 97mm 43mm 29mm 84mm apart 35 

10MDLS 10A, round earth, double pole with safety shutter. 97mm 43mm 29mm 84mm apart 35 

10MD15S 15A, double pole with shutter. 97mm 43mm 29mm 84mm apart 35 

10MD20 20A, double pole. 97mm 43mm 29mm 84mm apart 35 


10MP Single Auto Switched Socket Outlet Mechanism, 10A, single pole. Fascia - 42mm Ø. 42mm 43mm 

10MDP Single Auto Switched Socket Outlet Mechanism, 10A, double pole. Fascia - 42mm Ø. 42mm 43mm 

10MDPL 

Single Auto Switched Socket Outlet Mechanism, 10A, round earth, double pole. 


42mm 43mm 

10MDP15 Single Auto Switched Socket Outlet Mechanism, 15A, double pole. Fascia - 42mm Ø. 42mm 43mm 

33mm 


33mm 


33mm 


33mm 



Pg. 38 


Pg. 38 


Pg. 38 


Pg. 38 

10MDLB Single Auto Switched Socket Outlet Mechanism, 10A, double pole. 60mm 42mm 33mm 50mm apart 36 

10MDSLB Single Auto Switched Socket Outlet Mechanism, 10A, double pole with safety shutter. 60mm 42mm 33mm 50mm apart 36 

10MDLSLB Single Auto Switched Socket Outlet Mechanism, round earth, double pole, safety shutter. 60mm 42mm 33mm 50mm apart 36 

10MD15SLB Single Auto Switched Socket Outlet Mechanism, 15A, double pole with safety shutter. 60mm 42mm 33mm 50mm apart 36 

10MD20LB Single Auto Switched Socket Outlet Mechanism, 20A, double pole. 60mm 42mm 33mm 50mm apart 36 

G10MDS GEC Miniplug Mechanism, 10A, double pole with safety shutter. 46mm 46mm 34mm N/A 36 

G10FMDS GEC AF Series Mechanism, 10A, double pole with safety shutter. 74mm Ø 31mm 64mm apart 36 

G10FMD15S GEC AF Series Mechanism, 15A, double pole with safety shutter. 74mm Ø 31mm 64mm apart 36 

G10FMDLS GEC AF Series Mechanism, 10A, round earth with safety shutter. 74mm Ø 31mm 64mm apart 36 

SKIRTING MOUNTED SIDE CONNECTING SOCKET OUTLETS - 250V/10A, SINGLE POLE 

12M Single Auto Switched Socket Outlet. 63mm 43mm 29mm N/A 37 

17M Single Auto Switched Socket Outlet. 90mm 43mm 29mm N/A 37 

STANDARD SIZE SINGLE TOGGLE SWITCHED SOCKET OUTLETS - 250V/20A, HORIZONTALLY MOUNTED 

42/20 Single Switched Socket Outlet, toggle switch, single pole. 115mm 70mm 15mm 84mm apart 37 

42/20N Single Switched Socket Outlet, toggle switch, single pole with safety shutter & neon. 115mm 70mm 15mm 84mm apart 37 

SINGLE TOGGLE NARROW ARCHITRAVE SIZE SWITCHED SOCKET OUTLETS - 250V/10A, VERTICALLY MOUNTED 

40 Single pole. 115mm 48mm 15mm 98mm apart 37 

40D Double pole. 115mm 48mm 15mm 98mm apart 37 

35 

35 

35 

35 

75 



76 


UNSWITCHED SOCKET OUTLETS- SINGLE 


405 250V/10A, 2 pin parallel. 96mm 42mm 

33mm 

(Room protrusion - 3.5mm) 84mm apart 38 

405/32 32V/15A, 2 pin polarised, extra low voltage. 96mm 42mm 

33mm 


415 250V/10A, 3 pin. 96mm 42mm 

33mm 


415L 250V/10A, 3pin, round earth pin. 96mm 42mm 

33mm 


415/110 110V/10A, 3 pin, 2 round live pins. 96mm 42mm 

33mm 


415/15 250V/15A, 3 pin. 96mm 42mm 

33mm 


415MP 250V/10A, 3 pin, panel mount. 43mm 42mm 

33mm 



Pg. 38 38 

415MP15 250V/15A, 3 pin, panel mount. 43mm 42mm 

33mm 



Pg. 38 38 

415MPL S250V/10A, 3 pin, round earth, panel mount. 43mm 42mm 

33mm 



Pg. 38 38 

426 250V/10A, 3 pin, suits round J-Box. 66mm Ø 24mm 50mm apart 38 

426L 250V/10A, 3 pin, round earth pin, suits round J-Box. 66mm Ø 24mm 50mm apart 38 

426/15 250V/15A, 3 pin, suits round J-Box. 66mm Ø 24mm 50mm apart 38 

WILCO SOCKET OUTLETS (GREY ONLY) - SINGLE 

FOS106 250V/10A, 3 fl at pins. 96mm 42mm 28mm 84mm apart 39 

FOS106R 250V/10A, 3 pins, round earth pin. 96mm 42mm 28mm 84mm apart 39 

FOS106/2R 110V/10A, 3pins, 2 round live pins. 96mm 42mm 28mm 84mm apart 39 

FOS106/15 250V/15A, 3 fl at pins. 96mm 42mm 28mm 84mm apart 39 

FOS105T 2 fl at polarised, extra low voltage. 96mm 42mm 28mm 84mm apart 39 

ELECTRIC CLOCK CONNECTION ACCESSORIES - 250V 

408/3 Clock Point Recessed Socket, 15A, 50Hz, 3 pin. 106mm 59mm 25mm 84mm apart 39 

408/3A Clock Point Recessed Socket, 3 pin, suitable for other than 50Hz. 106mm 59mm 25mm 84mm apart 39 

408/4 Clock Point Recessed Socket, 5A, 4 pin. 106mm 59mm 25mm 84mm apart 39 

409/3 Clock Point Plug, 5A, 50Hz, 3 pin. 48mm 35mm 11mm N/A 39 

409/3A Clock Point Plug, 3 pin, suitable for other than 50Hz. 48mm 35mm 11mm N/A 39 

409/4 Clock Point Plug, 5A, 50Hz, 4 pin. 48mm 35mm 11mm N/A 39 

STANDARD SIZE SINGLE SWITCHED SOCKET OUTLETS - 250V, HORIZONTALLY MOUNTED 

15 10A. 115mm 73mm 14mm 84mm apart 41 

15S 10A with safety shutter. 115mm 73mm 14mm 84mm apart 41 

15N 10A with safety shutter and neon. 115mm 73mm 14mm 84mm apart 41 


15D15 15, double pole. 115mm 73mm 14mm 84mm apart 41 

15DN S10A, double pole, with safety shutter & neon. 115mm 73mm 14mm 84mm apart 41 

15DD 10A, double pole, deep plate. 115mm 73mm 33mm 84mm apart 41 

15DX 10A, double pole with extra switch. 115mm 73mm 14mm 84mm apart 41 

15/15 15A. 115mm 73mm 14mm 84mm apart 41 

15/15S 15A with safety shutter. 115mm 73mm 14mm 84mm apart 41 

15/15N 15A with safety shutter and neon. 115mm 73mm 14mm 84mm apart 41 

15L 10A, round earth pin. 115mm 73mm 14mm 84mm apart 41 

15LN 10A, round earth pin with safety shutter and neon. 115mm 73mm 14mm 84mm apart 41 

15X S10A with extra switch. 115mm 73mm 14mm 84mm apart 41 

15XS 10A with extra switch and safety shutter. 115mm 73mm 14mm 84mm apart 41 

15XN 10A with extra switch, safety shutter and neon. 115mm 73mm 14mm 84mm apart 41 

15XX 10A with two extra switches. 115mm 73mm 14mm 84mm apart 41 

STANDARD SIZE TWIN SWITCHED SOCKET OUTLETS - 250V, HORIZONTALLY MOUNTED 

25 10A. 115mm 73mm 16mm 84mm apart 42 

25S 10A with safety shutters. 115mm 73mm 16mm 84mm apart 42 

25N 10A with safety shutters and neons. 115mm 73mm 16mm 84mm apart 42 


25D15 15A, double pole. 115mm 73mm 16mm 84mm apart 42 


25/15S 15A with safety shutters. 115mm 73mm 16mm 84mm apart 42 

25/15N 15A with safety shutters and neons. 115mm 73mm 16mm 84mm apart 42


STANDARD SIZE TWIN SWITCHED SOCKET OUTLETS - 250V, HORIZONTALLY MOUNTED (continued) 


25/1510 15 & 10A. 115mm 73mm 16mm 84mm apart 42 

25L 10A, round earth pin. 115mm 73mm 16mm 84mm apart 42 

25X 10A, with extra one way switch. 115mm 73mm 16mm 84mm apart 42 

25XS 10A, extra one way switch and shutters. 115mm 73mm 16mm 84mm apart 42 

MF25X 10A, marked with “FAN” on extra switch. 115mm 73mm 16mm 84mm apart 42 

ML25X 10A, marked with “LIGHT” on extra switch. 115mm 73mm 16mm 84mm apart 42 

25XA 10A with removable extra switch. 115mm 73mm 16mm 84mm apart 42 

25XAN 10A, removable extra switch, safety shutters & neons. 115mm 73mm 16mm 84mm apart 42 

25XD 10A, double pole & removable extra switch. 115mm 73mm 16mm 84mm apart 42 

STANDARD SIZE SINGLE SWITCHED SOCKET OUTLETS - 250V, VERTICALLY MOUNTED 

15V 10A. 115mm 73mm 14mm 84mm apart 43 

15VS 10A with safety shutter. 115mm 73mm 14mm 84mm apart 43 

15VN 10A with safety shutter and neon. 115mm 73mm 14mm 84mm apart 43 

15V15 15A. 115mm 73mm 14mm 84mm apart 43 

15V15N 15A with safety shutter and neon. 115mm 73mm 14mm 84mm apart 43 

15VX 10A with removable extra switch. 115mm 73mm 14mm 84mm apart 43 

15VXS 10A with safety shutters and removable extra switch. 115mm 73mm 14mm 84mm apart 43 

15VXN 10A with safety shutters, neon and removable extra switch. 115mm 73mm 14mm 84mm apart 43 

15VXX 10A with two removable extra switches. 115mm 73mm 14mm 84mm apart 43 

STANDARD SIZE TWIN SWITCHED SOCKET OUTLETS - 250V/10A, VERTICALLY MOUNTED 

15/2V Two piece base. 115mm 73mm 14mm 84mm apart 43 

15/2VS With safety shutters, two piece base. 115mm 73mm 14mm 84mm apart 43 

15/2VN With neons and safety shutters, two piece base. 115mm 73mm 14mm 84mm apart 43 

15D2V Double pole, two piece base. 115mm 73mm 14mm 84mm apart 43 

15DD2V Double pole with deep plate, two piece base. 133mm 83mm 37mm 97mm apart 43 

25V Twin Switched Socket Outlet, 250V/10A. 115mm 73mm 16mm 84mm apart 43 

25VXA With removable extra switch. 115mm 73mm 16mm 84mm apart 43 

SKIRTING MOUNTED SINGLE SWITCHED SOCKET OUTLETS - 250V 

16 10A with safety shutter. 98mm 45mm 14mm 78mm apart 44 

16N 10A with safety shutter and neon. 98mm 45mm 14mm 78mm apart 44 

16F 10A, in line terminals. 98mm 45mm 14mm 78mm apart 44 


16X 10A with extra switch. 125mm 45mm 14mm 104mm apart 44 


SKIRTING MOUNTED TWIN SWITCHED SOCKET OUTLETS - 250V 


16/2S 10A with safety shutters. 168mm 45mm 13mm 145mm apart 44 

16/2N 10A with neons & safety shutters. 168mm 45mm 13mm 145mm apart 44 

16/2F 10A with straight sides. 168mm 45mm 13mm 145mm apart 44 

16/2MF 10A, suits ducting. 156mm 44mm 18mm 136mm apart 44 

16/2MF1510 T15A &10A, suits ducting. 156mm 44mm 18mm 136mm apart 44 

16/2MFD 10A, double pole. 156mm 44mm 18mm 136mm apart 44 

INTERMEDIATE SINGLE SWITCHED SOCKET OUTLETS - HORIZONTALLY MOUNTED 

14 Single Switched Socket Outlet, intermediate size, 250V/10A, horizontal. 115mm 61mm 13mm 84mm apart 44 

LARGE FORMAT SIZE SINGLE SWITCHED SOCKET OUTLETS - 250V/10A, HORIZONTALLY MOUNTED 

15/2 Single pole. 115mm 115mm 14mm 84 x 46mm 45 

15/2S Single pole with safety shutter. 115mm 115mm 14mm 84 x 46mm 45 

15/2N Single pole with safety shutter & neon. 115mm 115mm 14mm 84 x 46mm 45 

LARGE FORMAT SIZE TWIN SWITCHED SOCKET OUTLETS - 250V/10A, (115mm x 115mm), VERTICALLY MOUNTED 

25/2V Twin Switched Socket Outlet. 115mm 115mm 11mm 84 x 46mm 45 

25/2VS With safety shutters. 115mm 115mm 11mm 84 x 46mm 45 

25-2VN With neons and safety shutters . 115mm 115mm 11mm 84 x 46mm 45 

LARGE FORMAT SIZE TWIN SWITCHED SOCKET OUTLETS - HORIZONTALLY MOUNTED 

23 Twin Switched Socket Outlet, large format, 250V/10A. 145mm 86mm 15mm 120mm apart 45 

77 



78 


PROTECTED SOCKET OUTLETS 


15/15EL10 Single Switched Socket Outlet, 250V/15A, with RCD, 10mA. 116mm 74mm 30mm 84mm apart 46 

15/15EL30 Single Switched Socket Outlet, 250V/15A, with RCD, 30mA. 116mm 74mm 30mm 84mm apart 46 

25EL10 Twin Switched Socket Outlet, 250V/10A, with RCD, 10mA. 116mm 74mm 30mm 84mm apart 46 

25EL30 Twin Switched Socket Outlet, 250V/10A, with RCD, 30mA. 116mm 74mm 30mm 84mm apart 46 

25ELSB Spacer Block, (L122 X W83 X H30mm). 116mm 74mm 30mm 84mm apart 46 

25SF Twin switched socket outlet, 250V/10A, surge protected. (L115 X W73 X H16mm). 115mm 73mm 

plate - 17mm 


84mm apart 46 

30SFFM Surge Filter Mechanism, 250V/10A. - - - - 46 

COOKER SOCKET OUTLET & PLUG 

800CL 1.8m, 4mm2 Cord, with 250V/32A 3 pin plug. - - - - 46 

31VCS 3 Pin Cooker Socket on Standard Plate, 250V/32A (Suits 800CL). 115mm 73mm 11mm 84mm apart 46 

UNIVERSAL SHAVER OUTLET - 240V-110V 

727 Universal Shaver Outlet, Dual Voltage. 258mm 73mm 17mm 230 x 40mm 46 

727H Universal Shaver Outlet, Dual Voltage (horizontal mount). 184mm 85mm 18mm 152mm 46 

727V Universal Shaver Outlet, Dual Voltage, (vertical mount). 184mm 85mm 18mm 152mm 46 


31VTVA 1 Gang Standard Pattern Television Assembly. 115mm 73mm 11mm 84mm apart 47 

31VTV75 TV Antenna Socket in Standard Plate, 75 Ohm. 115mm 73mm 11mm 84mm apart 47 

31TVF “PAY TV” Antenna Socket in Standard Plate. 115mm 73mm 11mm 84mm apart 47 

32TVACFF “PAY TV/FTA TV” with a.c. Isolation. 115mm 73mm 11mm 84mm apart 47 

32TVFF “PAY TV/FTA TV” with F Type Connection. 115mm 73mm 11mm 84mm apart 47 

32TVSF “PAY TV/FTA TV” Screw Coaxial Connection. 115mm 73mm 11mm 84mm apart 47 

31VTV75ACF TV Socket with 3kVAc Isolation, 75 Ohm in standard size plate. 115mm 73mm 11mm 84mm apart 47 

31VTV75F TV Socket with F Type Conneciton, 75 Ohm in standard size plate. 115mm 73mm 11mm 84mm apart 47 

32VTV75FM TV-FM Splitter in standard size plate. 115mm 73mm 11mm 84mm apart 47 

TV CONNECTION SOCKETS, PLUGS & TERMINATORS 

30TV75P Coaxial Cable Plug, 75 Ohm. 33mm 11mm 11mm N/A 48 

30TV75CS TV Antenna Connection Socket, 75 Ohm. 33mm 11mm 11mm N/A 48 

30TV75C Coaxial RG59 Cable Connection Plug, 75 Ohm screw type. 18mm 17mm 17mm N/A 48 

30TV75C1 Coaxial RG6 Cable Connection Plug, 75 Ohm screw type. 18mm 17mm 17mm N/A 48 

30TV75T Terminator, suits sockets. 18mm 17mm 17mm N/A 48 

TV SURFACE MOUNTING CONNECTION ACCESSORY 

30TV75S Coaxial Cable Surface Socket, 75 Ohm. 54mm 29mm 25mm N/A 48 

TV ANTENNA MECHANISMS 

30PFM “F” Type Connection, 75 Ohm, suits “PAY TV”. 22mm 22mm 26mm N/A 49 

30TVM “PAY TV/FTA TV” with F Type Connection. 22mm 22mm 19mm N/A 49 

30TVFM TV Socket, 300 Ohm type, front clip. 21mm 21mm 19mm N/A 49 

30TV75M TV Antenna Socket, 75 Ohm, suits 30 Series plates. 22mm 22mm 38mm N/A 49 

30TV75MF TV Antenna Socket, 75 Ohm, with “F” type connection. 22mm 22mm 35mm N/A 49 

30TV75MACF TV Antenna Socket, 75 Ohm, with 3kV a.c. isolation. 22mm 22mm 33mm N/A 49 

30TV75MS TV Antenna Socket, 75 Ohm (screw fi xing, solderless). 22mm 22mm 28mm N/A 49 

TV FLY LEADS - 1.8M 

3105FL118MW Male to Male. N/A N/A N/A N/A 49 

3105FL118FW Male to Female. N/A N/A N/A N/A 49 

CHEMICAL RESISTANT STANDARD INDUSTRIAL RANGE 

31VA Flush Plate, with 1 x 30M mechanism in vertical format. 115mm 73mm 11mm 84mm apart 51 






31VX Blank Flush Plate. 115mm 73mm 11mm 84mm apart 51 

15 Single Switched Socket Outlet, 250V/10A, horizontal mounting. 115mm 73mm 14mm 84mm apart 51 

15X Single Switched Socket Outlet, 250V/10A, with extra switch, horizontal mounting. 115mm 73mm 14mm 84mm apart 51 

15/15 Single Switched Socket Outlet, 250V/15A, horizontal mounting. 115mm 73mm 14mm 84mm apart 51 

15V Single Switched Socket Outlet, 250V/10A, vertical mounting. 115mm 73mm 14mm 84mm apart 51 

25V Twin Switched Socket Outlet, 250V/10A, single base, vertical mounting. 115mm 73mm 16mm 84mm apart 51 

25 Twin Switched Socket Outlet, 250V/10A, horizontal mounting. 115mm 73mm 16mm 84mm apart 51 

25XA Twin Switched Socket Outlet, 250V/10A, with extra switch, horizontal mounting. 115mm 73mm 16mm 84mm apart 51 

449A 1 Gang Mounting Block, suits all fl ush plates with 115 x 73mm and 84mm centres. 122mm 78mm 32mm 84mm apart 51 

449ASD 

14mm Spacer, for standard pattern accessories, with 84mm centres, four mounting 

holes in centre. 

116mm 73mm 14mm 84mm apart 51


PROTECTED SWITCHED SOCKET OUTLETS - 250V/10A, ZINC DIE CAST 


PC110 3 fl at sockets. 100mm 79mm 50mm 82mm apart 54 

PC110-2FR 2 fl at, 1 round socket. 100mm 79mm 50mm 82mm apart 54 

PC110-2RF 1 fl at socket. 100mm 79mm 50mm 82mm apart 54 

PC110-N 3 fl at sockets, with neon. 100mm 79mm 50mm 82mm apart 54 

PC110V-2 3 fl at sockets, vertical mount, 2 gang. 142mm 102mm 50mm 84 x 82mm apart 54 

PC110V-2-DP zinc die cast, 3 fl at sockets, vertical mount, 2 gang, double pole. 142mm 102mm 50mm 84 x 82mm apart 54 

PROTECTED SWITCHED SOCKET OUTLETS - 250V/15A, ZINC DIE CAST 

PC115 3 fl at sockets. 101mm 79mm 50mm 82mm apart 54 

PC115-N 3 fl at sockets, with neons. 101mm 79mm 50mm 82mm apart 54 

PC115V-2 3 fl at sockets, vertical mount, 2 gang. 141mm 102mm 50mm 84 X 82mm apart 54 

SWITCH MECHANISMS - 250V UNLESS STATED OTHERWISE 

Cat No Description PAGE 

30M 10A, 1 way/2 way - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 56 

30MRD 10A, 1 way/2 way (with red dolly mark)- terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole.M rating is 100. 56 

30FLM 10A, 1 way/2 way (suits fl uoro loads)- terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 120. 56 

30FLM15 15A, 1 way/2 way (suits fl uoro loads)- terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 90. 56 

30RSM2 15A, Rotary (2 On - 2 Off) - also suitable for 12V d.c. 15A, and audio and control applications. Switch positions indicated in window.M rating is 50. 56 

30RSM3 15A, Rotary (3 On - 1 Off) - also suitable for 12V d.c. 15A, and audio and control applications. Switch positions indicated in window.M rating is 50. 56 

30MCO 10A, Changeover, double throw (selects alternate circuits). 56 

30MI 10A, Intermediate - four terminals of 3.5mm ø accommodates 2 x 2.5mm² cables. Body fi ts 22mm ø hole. 56 

30MBP 440V/15A, Bell press - offers facility for momentary ON or OFF (one Looping terminal). 56 

30MBPN 15A, Illuminated bell press - offers facility for momentary ON or OFF. Neon is connected across terminals 1 & 4.Alternative lamp voltages available. 56 

30MBPR 10A, Bell press rocker - offers facility for momentary ON or OFF. Suitable for extra low voltage applications (one Looping terminal). 56 

30MD 10A, 1 way, double pole, single throw - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole.M rating is 90. 56 

30HMD 10A, double pole, marked “HEAT”. 56 

30MD2 10A, 2 Way, double pole, double throw - six terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. M rating is 75. 56 

30MD15 15A, 1 way, double pole, single throw - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole.M rating is 90. 56 

30MD20 20A, 1 way, double pole - 4 terminals of 1.5mm ø accommodate 3 x 2.5mm² cables. Body fi ts 34mm ø hole. M rating is 100. 56 

30M15 15A, 1 way/2 way - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 90. 56 

30M15RD 15A, 1 way/2 way (with red dolly mark)- terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 90. 56 

30M20 20A, 1 way/2 way - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 90. 56 

30M35 35A, 1 way/2 way - terminal bore of 3.6mm ø & Looping terminal bore of 3.9mm ø. M rating is 160. Marked 35A. 56 

30TKM 20A (5A fl uorescent load), 1 way/2 way, toggle key actuated - one Looping terminal. M rating is 100. 56 

30/1/2LM 10A, 1 way (two Looping terminals) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 56 

30/1ELM 10A, 1 way (one Looping & one Earth terminal) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 56 

30/1NM 

10A, 1 way rocker with neon indicator - neon can be wired to indicate ON, OFF or POWER AVAILABLE. Looping/switch terminal bores of 4.1mm ø. Body fi ts 34mm ø hole 

(Note: Neutral required). 

56 

30/2NM 

10A, 2 way rocker with neon indicator - neon can be wired to indicate ON, OFF or POWER AVAILABLE. Looping/switch terminal bores of 4.1mm ø. Body fi ts 34mm ø hole 

(Note: Neutral not required). 

56 

30/5M 

10A, 1 way/2 way (with 5 terminals - one Looping and one Earth terminal). Terminal bore of Common, Looping and Earth of 5.3mm ø accommodates 4 x 2.5mm² 

cables. Terminal bore of ‘1’ and ‘2’ of 4.1mm ø accommodates 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 26mm ø hole. M rating is 40. 

56 

NEON INDICATOR MECHANISMS - 250V 

30N - RED Neon indicator (RED) 57 

30N - 

OTHER COLOURS 

Neon indicator (OTHER COLOURS) 57 

SWITCH MECHANISMS - 250V/10A, TERMINAL BORES OF 4.1mm o ACCOMODATE 4 X 1.5mm2 CABLES, 

BODY FITS 22mm o HOLE 2 WAY WITH MESSAGES 

30FM Marked “FAN” - M rating is 100. 57 

30HM Marked “HEAT” - M rating is 100. 57 

30EM Marked “EXHAUST” - M rating is 100. 57 

30LM Marked “LIGHT” - M rating is 100. 57 

30MAM Marked “MANUAL-AUTO” - M rating is 100. 57 

30PM Marked“DISPOSAL” - M rating is 100. 57 

30XM Marked “WASTE” - M rating is 100. 57 

30YM Marked “WASH” - M rating is 100. 57 

30DNM Marked “DAY/NIGHT” - M rating is 100. 57 

30FAM Marked “FAMILY” - M rating is 100. 57 

30TM Marked “T.V.” - M rating is 100. 57 

30COM Marked “COOL” - M rating is 100. 57 

30AUM Marked “AUTO” - M rating is 100. 57 

30ACM Marked “AIR CON” - M rating is 100. 57 

30STM Marked “STUDY” - M rating is 100. 57 

79 



80 


SWITCH MECHANISMS - 250V/10A, 2 WAY WITH MESSAGES250V/10A, TERMINAL BORES OF 4.1mm o 

ACCOMODATE 4 X 1.5mm 2 OR 3 X 2.5mm 2 CABLES, BODY FITS 22mm o HOLE 2 WAY WITH MESSAGES 

Cat No Description PAGE 

30PUM Marked“PUMP” - M rating is 100. 58 

30BM Marked “BATH” - M rating is 100. 58 

30KM Marked “KITCHEN” - M rating is 100. 58 

30RUM Marked “RUMPUS” - M rating is 100. 58 

30LOM Marked “LOUNGE” - M rating is 100. 58 

30DM Marked “DINE” - M rating is 100. 58 

30FNM Marked “OFF/ON” - M rating is 100. 58 

30AM Marked “ALARM” - M rating is 100. 58 

30BDM Marked “BED” - M rating is 100. 58 

30BD1M Marked “BED1” - M rating is 100. 58 




30HLM Marked “HI/LOW” - M rating is 100. 58 

30MSEN Marked “SENSOR” - M rating is 100. 58 

30MOS Marked “OUTSIDE” - M rating is 100. 58 

30MFR Marked “FORWARD/REVERSE” - M rating is 100. 58 

30MFD Marked “FRIDGE” - M rating is 100. 58 

30MMW Marked “MICROWAVE” - M rating is 100. 58 

30MZ1 marked “ZONE1” - M rating is 100. 58 

30MZ2 Marked “ZONE2”- M rating is 100. 59 

30MZ3 Marked “ZONE3” - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 59 

30MZ4 Marked “ZONE4” - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 59 

39M 3 Position - marked “HI-OFF-LO”. Three terminals, 3.5mm ø accommodate 2 x 2.5mm² cables. 59 

39MAOM 3 Position - marked “MAN-OFF-AUTO”. Three terminals, 3.5mm ø accommodate 2 x 2.5mm² cables. 59 

39MSON 3 Position - marked “SENSOR-OFF-ON”. Three terminals, 3.5mm ø accommodate 2 x 2.5mm² cables. 59 

SWITCH MECHANISMS - 250V/16A, TERMINAL BORES OF 4.1mm o ACCOMODATE 4 X 1.5mm 2 OR 3 X 2.5mm 2 CABLES, 


30M16SEN Marked “SENSOR” - M rating is 100. 59 

30M16OS Marked “OUTSIDE” - M rating is 100. 59 

30M16FR Marked “FORWARD/REVERSE” - M rating is 100. 59 

30M16FD Marked “FRIDGE” - M rating is 100. 59 

30M16MW Marked “MICROWAVE” - M rating is 100. 59 

SWITCH MECHANISM - 250V/20A, 2 WAY WITH MESSAGE 

30M20HW Marked “HOT WATER SERVICE” - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 59 

SWITCH MECHANISMS - 250V/35A, TERMINAL BORES OF 4.1mm o ACCOMODATE 4 X 1.5mm 2 OR 3 X 2.5mm 2 CABLES, 


30M35HOB Marked “HOB” - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 59 

30M350V Marked “OVEN” - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 59 

30M35R Marked “RANGE” - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fi ts 22mm ø hole. M rating is 100. 59 

10A ILLUMINATED ROCKER SWITCH MECHANISMS, 250V/10A, 2 WAY INBUILT NEON, WITH MESSAGES 

30/2NMSEN Marked “SENSOR”. Neon can be wired to indicate ON, OFF or POWER AVAILABLE. Looping/switch terminals of bore 3.9mm ø. Body fi ts 34mm ø hole. 60 

30/2NMOS Marked “OUTSIDE”. Neon can be wired to indicate ON, OFF or POWER AVAILABLE. Looping/switch terminals of bore 3.9mm ø. Body fi ts 34mm ø hole. 60 

DIMMER, FAN CONTROL AND SURGE FILTER MECHANISMS 

32E450LM C-Thru ® Dimmer Mechanism, Leading Edge (suits incandescent lighting and low voltage lighting using iron core transformers), 220 - 240V/450W. 60 

32E450TM C-Thru ® Dimmer Mechanism, Trailing Edge (suits incandescent lighting and low voltage lighting using electronic transformers), 220 - 240V/450W. 60 

32E500FM C-Thru ® Fan Speed Controller Mechanism, 220-240V/500W. 60 

30POTDM Dimmer Potentiometer (suits products such as 780 Series and the 761 Series). 60 

30POTFM Fan Controller Potentiometer (suits products such as 32 Series High Powered Dimmers & 761 Series). 60 

30SFM Surge Filter Mechanism - 250V 10A. 60 

CIRCUIT IDENTIFICATION AND BLANKING PRODUCTS 

30P Removable Blank Plug, to suit or blank out 30 Series aperture. 60 

30PID Removable Plug, with identifi cation facility, supplied with tamper proof transparent cover. 60 

30PFO Plug, marked “FRIDGE - FREEZER ONLY”. 60 

30PIDA4L Label Sheets, 10 x A4 packet, red and white available (non-adhesive). 60

MOUNTING BLOCKS 

WALL 

CLIPS 

WALL BRACKETS 

AND PLATES 

WALL BOXES 

Cat 

No. 

30, 

30D 

30/15 

39 

30DD 32A 33A 34A 30T 32TA 33TA 

31BA 

32BA 

31BLA 

32BLA 

31BMF 

32BMF 

35BMF 

16/2MF 

16/2MFD 

16/2MF1510 

31VA 

31HA 

32VA 

32HA 

33VA 

33HA 

34VA 

34HA 

35VA, 36VA 

31VHWP 

36VKT3N 

36VKT3NX 

36VKT4 

36VKT4X 

31/2VA 

32/2VA 

33/2VA 

31/2VX 

34/2VA 

35/2VA 

36/2VA 

37/2VA 

38/2VA 

39/2VA 31/3VX 31VR 31VTO 31VCS 

449AS NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 Y1 NS NS NS10 NS11 YES Y1 

449ASD NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 

449A NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 

448 NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS YES YES NS10 NS11 NS12 NS12 

448SD NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS YES YES NS10 NS11 NS12 NS12 

238 NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 

900SPBP NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 

900SPMB NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 

25ELSB NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 

900MMB YES NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS12 NS NS NS10 NS11 NS12 NS12 

70/1 YES NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS12 NS NS NS10 NS11 NS12 NS12 

70/2 NS1 YES NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS12 NS NS NS10 NS11 NS12 NS12 

70/3 NS1 NS2 YES NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS12 NS NS NS10 NS11 NS12 NS12 

70B NS1 NS2 NS3 NS4 NS5 NS6 NS7 YES NS8 NS8 NS9 NS12 NS NS NS10 NS11 NS12 NS12 

47 NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 N10 YES NS9 NS12 NS NS NS10 NS11 NS12 NS12 

536 NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS12 NS NS NS10 YES NS12 NS12 

1920MB NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 

154 NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 Y1 NS NS NS10 NS11 YES Y1 

154RM NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 Y1 NS NS NS10 NS11 YES Y1 

154/2 NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS12 YES YES NS10 NS11 NS12 NS12 

155PRM NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 Y1 NS NS NS10 NS11 YES Y1 

155P NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 Y1 NS NS NS10 NS11 YES Y1 

155 NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 Y1 NS NS NS10 NS11 YES Y1 

155NA NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 Y1 NS NS NS10 NS11 YES Y1 

157/1P NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 

157/1PRM NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 


257D NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 

257D2 NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS12 YES YES NS10 NS11 NS12 NS12 

257D3 NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS12 NS NS YES NS11 NS12 NS12 


157/1 NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 

157/1X NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 




164/1 NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 YES NS NS NS10 NS11 YES YES 


727VHB NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS12 NS NS NS10 NS11 NS12 NS12 

727B NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS12 NS NS NS10 NS11 NS12 NS12 

727MB NS1 NS2 NS3 NS4 NS5 NS6 NS7 NS1 NS8 NS8 NS9 NS12 NS NS NS10 NS11 NS12 NS12 


WALL 

CLIPS 

WALL BRACKETS 

AND PLATES 

WALL BOXES 

Cat 


10, 

10D, 

10DS, 

10DN, 

10DLS, 

10D15S, 

20, 

20D, 

20DS, 

20DN, 

20DLS, 

15, 15X 

15S, 15N, 

15D, 15D15, 

15DN, 

15/15, 

15/15S, 

15/15N, 

15L, 

15LN, 

15XX, 

25, 25L, 25X, 

25XS, 25XA, 

25XAN, 25XD 25S, 

25N, 25D, 25D15, 

25/15, 25/15S, 

25/15N, 25/1510, 

42/20, 42/20N 15DD 15DX 

15V, 

15VS, 

15VX, 

15VXN, 

15VXX, 

15V15, 

25V, 

25VXA 

YOU WILL FIND THE KEY TO THIS TABLE ON PAGE 86 YOU WILL FIND THE KEY TO THIS TABLE ON PAGE 86 YOU WILL FIND THE KEY TO THIS TABLE ON PAGE 86 

15/2V, 

15/2VS, 

15/2VN, 

15D2V, 

15/2, 

15/2S, 

15/2N, 

25/2V, 

25/2VS, 

25/2VN 15DD2V 40 14 

16, 

16N , 

16F, 

16/15 

16/2, 

16/2S, 

16/2N, 

16/2F 16X 

449AS Y1 N8 Y1 Y1 Y2 NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

449ASD YES N8 YES YES Y1 NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

449A YES N8 YES YES YES NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

448 NS12 NS12 NS12 NS12 NS12 YES NS3 NS3 NS12 NS13 NS14 NS15 NS16 

448SD NS12 NS12 NS12 NS12 NS12 YES NS3 NS3 NS12 NS13 NS14 NS15 NS16 

238 YES N8 YES YES YES NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

900SPBP YES N8 YES YES YES NS NS3 NS3 N8 NS13 NS14 NS15 NS16 

900SPMB YES N8 YES YES YES NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

25ELSB YES N8 YES YES YES NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

900MMB NS12 NS12 NS12 NS12 NS12 NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

70/1 NS12 NS12 NS12 NS12 NS12 NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 



70B NS12 NS12 NS12 NS12 NS12 NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

47 NS12 NS12 NS12 NS12 NS12 NS NS3 YES NS12 NS13 NS14 NS15 NS16 

536 NS12 NS12 NS12 NS12 NS12 NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

1920MB YES YES YES YES YES NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

154 Y1 YES Y1 Y1 Y3 NS NS3 NS3 Y1 NS13 NS14 NS15 NS16 

154RM Y1 YES Y1 Y1 Y3 NS NS3 NS3 Y1 NS13 NS14 NS15 NS16 

154/2 NS12 NS12 NS12 NS12 NS12 YES NS3 NS3 NS12 NS13 NS14 NS15 NS16 

155PRM Y1 YES Y1 Y1 Y3 NS NS3 NS3 Y1 NS13 NS14 NS15 NS16 

155P Y1 YES Y1 Y1 Y3 NS NS3 NS3 Y1 NS13 NS14 NS15 NS16 

155 Y1 YES Y1 Y1 Y3 NS NS3 NS3 Y1 NS13 NS14 NS15 NS16 

155NA Y1 YES Y1 Y1 Y3 NS NS3 NS3 Y1 NS13 NS14 NS15 NS16 

157/1P YES YES YES YES YES NS NS3 NS3 YES NS13 NS14 NS15 NS16 

157/1PRM YES YES YES YES YES NS NS3 NS3 YES NS13 NS14 NS15 NS16 

257 YES YES YES YES YES NS NS3 NS3 YES NS13 NS14 NS15 NS16 

257D YES YES YES YES YES NS NS3 NS3 YES NS13 NS14 NS15 NS16 

257D2 NS12 NS12 NS12 NS12 NS12 YES NS3 NS3 NS12 NS13 NS14 NS15 NS16 

257D3 NS12 NS12 NS12 NS12 NS12 NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 


157/1 YES YES YES YES YES NS NS3 NS3 YES NS13 NS14 NS15 NS16 

157/1X YES YES YES YES YES NS NS3 NS3 YES NS13 NS14 NS15 NS16 




164/1 YES YES YES YES YES NS NS3 NS3 YES NS13 NS14 NS15 NS16 


727VHB NS12 NS12 NS12 NS12 NS12 NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

727B NS12 NS12 NS12 NS12 NS12 NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

727MB NS12 NS12 NS12 NS12 NS12 NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

81 82 

23, 

23X 


WALL 

CLIPS 

WALL BRACKETS 

AND PLATES 

WALL BOXES 

Cat 


32E450L, 

32E450T, 

32E500F 

31E800T, 

31E1000L, 

31VETF 

31VETR, 

31VETR3, 

31VSSR 

319, 

319RA, 

319N, 

319HP 319X 

TC15/24, 

TC15/15/24, 

TC15/15/7D 

TC32V1, 

TC32V24, 

TC32V7D 

15/15EL10, 

15/15EL30, 

25EL10, 

25EL30 

15XRZ, 

15X15RZ 25SF 727 

449AS Y3 Y4 N12 Y3 Y4 NS6 Y3 Y6 Y4 Y2 NS17 

449ASD Y2 Y3 N12 Y2 Y3 NS6 Y2 Y6 Y3 Y2 NS17 

449A YES N3 N3 YES YES NS6 YES YES N3 YES NS17 

448 NS12 NS12 NS12 NS12 NS12 NS6 NS12 NS12 NS12 NS12 NS17 

448SD NS12 NS12 NS12 NS12 NS12 NS6 NS12 NS12 NS12 NS12 NS17 

238 YES YES YES YES NS12 NS6 YES YES YES YES NS17 

900SPBP Y1 Y2 Y2 Y1 Y2 NS6 Y1 Y4 Y2 YES NS17 

900SPMB YES YES YES YES NS12 NS6 YES YES YES YES NS17 

25ELSB YES YES YES YES YES NS6 YES YES YES YES NS17 

900MMB NS12 NS12 NS12 NS12 NS12 NS6 NS12 NS12 NS12 NS12 NS17 

70/1 NS12 NS12 NS12 NS12 NS12 NS6 NS12 NS12 NS12 NS12 NS17 



70B NS12 NS12 NS12 NS12 NS12 NS6 NS12 NS12 NS12 NS12 NS17 



1920MB YES Y2 N13 Y1 Y1 NS6 YES YES Y1 YES NS17 

154 Y4 Y4 Y4 Y3 Y4 NS6 YES Y6 YES Y3 NS17 

154RM Y4 Y4 Y4 Y3 Y4 NS6 YES Y6 YES Y3 NS17 


155PRM Y4 Y4 Y4 Y3 Y4 NS6 YES Y6 YES Y3 NS17 

155P Y4 Y4 Y4 Y3 Y4 NS6 YES Y6 YES Y3 NS17 

155 Y4 Y4 Y4 Y3 Y4 NS6 YES Y6 YES Y3 NS17 

155NA Y4 Y4 Y4 Y3 Y4 NS6 YES Y6 YES Y3 NS17 

157/1P YES YES X5 YES YES NS6 YES YES YES YES NS17 

157/1PRM YES YES X5 YES YES NS6 YES YES YES YES NS17 

257 YES YES X5 YES YES NS6 YES YES YES YES NS17 

257D YES YES X5 YES YES NS6 YES YES YES YES NS17 

257D2 NS12 NS12 NS12 NS12 NS12 NS6 NS12 NS12 NS12 NS12 NS17 

257D3 NS12 NS12 NS12 NS12 NS12 NS6 NS12 NS12 NS12 NS12 NS17 


157/1 YES YES X5 YES YES NS6 YES YES YES YES NS17 

157/1X YES YES X5 YES YES NS6 YES YES YES YES NS17 




164/1 YES YES X5 YES YES NS6 YES YES YES YES NS17 


727VHB NS12 NS12 NS12 NS12 NS12 NS6 NS12 NS12 NS12 NS12 NS17 

727B NS12 NS12 NS12 NS12 NS12 NS6 NS12 NS12 NS12 NS12 YES 

727MB NS12 NS12 NS12 NS12 NS12 NS6 NS12 NS12 NS12 NS12 YES

MOUNTING ACCESSORIES CROSS REFERENCE CHART 

FIRE RATED 

WALL BOXES 

ENCLOSURES 

JUNCTION 

BOXES 

Cat 


10, 

10D, 

10DS, 

10DN, 

10DLS, 

10D15S, 

20, 

20D, 

20DS, 

20DN, 

15, 

15S, 

15N, 

15D, 

15D15, 

15DN, 

15/15, 

15/15S, 

15/15N, 

15L, 

15LN, 

15X, 

15XX, 

25, 

25L, 

25X, 

25XS, 

25XA, 

25XAN, 

25XD, 

25S, 

25N, 

25D, 

25D15, 

25/15, 

25/15S, 

25/15N, 

25/1510, 

42/20, 

42/20N 15DD 15DX 

15V, 

15VS, 15VX, 

15VXN, 15VXX, 

15V15, 

25V, 

25VXA 

15/2V, 

15/2VS, 

15/2VN, 

15D2V, 

15/2, 15/2S, 

15/2N, 25/2V, 

25/2VS, 25/2VN 15DD2V 40 14 

16, 

16N, 

16F, 

16/15 

16/2, 

16/2S, 

16/2N, 

16/2F 16X 

157/1F YES YES YES YES YES NS NS3 NS3 YES NS13 NS14 NS15 NS16 

F157/1 YES YES YES YES YES NS NS3 NS3 YES NS13 NS14 NS15 NS16 

157/2F NS12 NS12 NS12 NS12 NS12 YES NS3 NS3 NS12 NS13 NS14 NS15 NS16 

224/1 YES NS12 YES AS AS NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

223H Y1 NS12 NS AS AS NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

255 YES NS12 YES AS AS NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 

240 


T240 


SC240 


NS12 NS12 NS12 NS12 NS12 NS NS3 NS3 NS12 NS13 NS14 NS15 NS16 



YOU WILL FIND THE KEY TO THIS TABLE ON PAGE 86 

23, 

23X 

85 


CODE DESCRIPTION - NOT SUITABLE 

AS The product can be mounted, however, it will not meet Australian Standards requirements. 

N3 Product base fouls the accessory mounting bosses, meaning that the product can’t be mounted fl ush. 

N6 The product can be mounted, however, the ‘press to test’ & ‘press to reset’ buttons can’t be pushed. 

N8 The fi nished result looks very unprofessional. 

N10 Mounting centres line up, however, the product overhangs the accessory. 

N12 The bosses attaching the mechanism back box to the fl ush plate protrude below the fl ush plate edge, meaning that the product can’t be mounted fl ush. 

N13 Product base is too large to fi t into the accessory. 

NS1 Can be direct mounted to surface (55mm mounting centres). 









NS10 Can be direct mounted to surface (84mm mounting centres - 3 sets, 46mm apart). 







NS17 Can be direct mounted to surface (230mm x 40mm mounting centres). 


T The text on the top of the cover can’t be seen. 

CODE DESCRIPTION - SUITABLE 

X5 Ensure mounting accessory is set back 25mm from outer wall surface. 

Y1 Allow 10mm depth for mechanism and cable protrusion. 





Y7 The conduit plugs or conduit have to be shortened to accommodate the large base of product. 

86 


It is often diffi cult to determine which mounting accessory is best utilised when installing the vast amount 

of products in the Clipsal switch & socket ranges. The cross-reference chart in the following pages will 

help you to simplify this task. 

Individual Switch & Socket sections for the Standard Range have been formatted to indicate if a product 

can or cannot be installed with a particular mounting accessory. 

This cross reference charts is best used in conjunction with the “Key” on Page 86. 

Product of Clipsal Australia Pty Ltd 

ABN 27 007 873 529 

Head Offi ce 

12 Park Terrace, Bowden 

South Australia 5007 

Telephone (08) 8269 0511 

Facsimile (08) 8340 1724 

Internet clipsal.com 

E-Mail plugin@clipsal.com.au 

Offi ces in all States 

NSW Sydney (02) 9794 9200 

Albury (02) 6041 2377 

VIC Melbourne (03) 9207 3200 

Country Areas 1800 653 893 

QLD Brisbane (07) 3244 7444 

Townsville (07) 4729 3333 

SA Adelaide (08) 8268 0400 

WA Perth (08) 9442 4444 

TAS Launceston (03) 6343 5900 

NT Darwin (08) 8947 0278 

Area Representatives 

NSW Albury (02) 6041 2377 

Mid North Coast 0418 430 361 

Coffs Harbour 0418 653 183 

Dubbo 0418 822 564 

Newcastle 0407 298 792 

0418 434 169 

0418 686 040 

South West Sydney 0419 868 353 

Tamworth 0417 714 339 

Wagga Wagga 0418 578 903 

Wollongong 0418 423 581 

ACT Canberra 0419 238 824 

0418 164 070 

VIC Bendigo 0418 570 213 

Geelong 0418 527 233 

Gippsland 0418 512 680 

Western Victoria 0419 380 444 

QLD Cairns 0418 773 254 

Mackay 0418 752 134 

Maryborough 0418 664 338 

Northern Rivers 0418 768 902 

Rockhampton 0419 869 752 

Sunshine Coast 0418 711 786 

Toowoomba 0418 726 394 

Townsville 0418 180 372 

WA Bunbury 0418 931 684 

Kalgoorlie & 

Eastern Gold Fields 

0417 928 981 

Karratha 0418 937 249 

SA Riverland/Mildura/ 

Broken Hill 0418 596 145 

International Enquiries 

International Sales and Marketing 

Telephone + 61 8 8269 0587 

Facsimile + 61 8 8340 7350 

E-Mail export@clipsal.com.au 

New Zealand 

Clipsal Industries (NZ) Ltd 

Telephone (09) 576 3403 

Facsimile (09) 576 1015 

E-Mail headoffi ce@clipsal.co.nz 

Customer Service 

Free Fax (0508) 250 305 

Auckland/Mobile Phone (09) 572 0014 

Free Phone (0508) CLIPSAL 

2547725 

You can fi nd this brochure and many 

others online in PDF format at: 

clipsal.com 

Follow the links off the home page 

or access the following page directly: 

clipsal.com/wat_lib_pdf.cfm 

clipsal.com 

Special thanks to 

Graham Ward (Active Connection Electrical) 

and Greg Spurling (Spurling Electrical) 

for their contribution to this catalogue. 

The shape of the switch dolly is a trade mark of 

Clipsal Australia Pty. Ltd. 

Clipsal Australia Pty Ltd reserves the right to change 

specifi cations, modify designs and dis con tin ue items 

without incurring obligation and whilst every effort is 

made to ensure that descriptions, specifi cations and 

other in for ma tion in this catalogue are correct, no 

warranty is given in respect thereof and the company 

shall not be liable for any error therein. 

©Copyright Clipsal Australia Pty Ltd 2005. 

All rights reserved. 

This material is copyright under Australian and 

international laws. Except as permitted under the 

relevant law, no part of this work may be reproduced 

by any process without prior written permission of 

and acknowledgement to Clipsal Australia Pty Ltd. 

O/N 8414 July 05/01 

C1-002 

STANDARD SERIES - No other range is up to standard O/N 8414 July 05/01

Standard Series Technical Catalogue, No other range is - Clipsal

Create successful ePaper yourself

Delete template?

Save as template?