Materials Science Engineering (MSE - DGM

Young Researchers 

MATERIALS 

MSE 

SCIENCE 

engineering 

meet Professionals

MSE 2012 Programme Overview 

lectureroom 

A1 

groundfloor 

A2 

groundfloor 

A3 

groundfloor 

A4 

groundfloor 

A5 

groundfloor 

A01 

basement 

A02 

basement 

A03 

basement 

A04 

basement 

Staats 

archiv 

Tue 

9:30 MSE Opening, Prof. Rödel (DGM), Prof. Kleiner, (DFG) 

25.9. 10.00-10.40 

1. Plenary Julian Allwood, University of Cambridge, USA 

10.45-12.15 B1 E1 D3 F2 F4 A2 A6 C5 B3 Y1 

11.00-12.00 

12.15-13.45 

13.00-16.30 

13.45-14:25 

14.30-16.00 B1 E1 D3 F2 F4 A2 A6 C5 B3 Y1 

16.00-16.30 

Podiumsdiskussion zum Thema "Konsequenzen der Energiewende für das Fachgebiet der 

Materialwissenschaft" (Welcome Hotel, in German, only for registered participants) 

Lunch break & Postershow & Exhibition 

acatech SIDE EVENT "Werkstofftechnische Herausforderungen der Energiewirtschaft 

(Welcome Hotel, in German, only for registered participants) 

2. Plenary Bruno C. De Cooman, Pohang Institute of Science and Technology, Korea 

Coffee break & Postershow & Exhibition 

16.30-18.00 B1 C7 B7 F2 F4 G1 A5 C1 B3 Y1 

18.30-23.00 

MSE-Party with Star Guests Waymond Harding & Smiley Garfield 

Wed 8.30-9.10 

26.9. 9.15-10.45 B4 E2 B7 D1 F1 A5 A7 C1 C4 Y1 

9.00-12.30 

10.00-15.00 

10.45-11.15 

11.15-12.45 B4 E2 B7 D1 F1 A5 A7 B5 C4 Y1 

12.45-14.00 

14.00-14.40 4. Plenary Kristi Kiick, University of Delaware, Newark, USA 

14.45-16.15 B4 E4 B5 C1 F3 A5 A7 B6 C4 Y1 

16.15-16.45 

3. Plenary Christopher Schuh, MIT, USA 

SIDE EVENT / BMBF - Multimaterialsysteme fügen - Neue Herausforderungen im Leichtbau 

(Staatsarchiv, in German, only for registered participants) 

SIDE EVENT / 5. Nachwuchskarriereworkshop (in German, only for registered participants) 




16.45-18.15 B4 E4 B5 C1 F3 A3 A7 B6 C4 Y1 

18.15-19.00 

19.00-21.00 

5. Plenary Z.L. Wang, School of Materials Science&Engineering Georgia, Atlanta, USA 

Posterevening with Snacks and Beer 

Thu 8.30-9.10 6. Plenary C. Draxl, Humboldt University Berlin 

27.9. 9.15-10.45 B4 B2 D2 C1 F5 A3 A1 B6 C2 Y1 

10.45-11.15 

11.15-12.45 B4 B2 D2 C1 F5 A3 A1 B6 C2 Y1 

12.45-14.00 



14.00-14.40 

7. Plenary Dwight Viehland, Virginia Tech, Blacksburg, USA 

14.45-15.00 

15.00-16.30 B9 B2 E3 C3 B8 A3 A4 B6 C6 Y1 

16.30-17.00 

Poster Award Presentation, Wiley VCH 


17.00-18.30 B9 B2 E3 C3 B8 A3 A4 G1 C6

Programme 

25-27 Sept 2012 

Darmstadt, Germany 

www.mse-congress.de 

2 

3 

4 

5 

6 

6 

8 

15 

22 

44 

64 

71 

Welcome 

MSE Experts Committee 

General Information 

Günter Gottstein Honorary 

Symposium 

DGM-Tag 2012 

MSE Side Events 

Plenary Lectures 

Symposium Organisers 

Lecture Programme 

Poster Programme 

List of Authors 

List of Exhibitors

Welcome 

Dear colleagues, 

The biennial international conference 

“Materials Science Engineering (MSE 

2012)” organised by the Deutsche 

Gesellschaft für Materialkunde will take 

place in Darmstadt from 25 – 27 

September 2012. Professor Matthias 

Kleiner, President of the German 

Research Foundation (DFG), and 

Professor Jürgen Rödel, University of 

Darmstadt, will open the conference on 

Tuesday morning. 

With more than 1000 presentations from 

48 nations, the conference is organized 

in 6 topics: A - Functional Materials, B - 

Structural Materials, C – Processing, D – 

Characterisation, E – Modelling and F – 

Biomaterials. Further special symposia 

will address “Materials Engineering in 

Australia” and a celebratory event for 

our honorary member Professor 

Gottstein. The topics are arranged in 35 

symposia hosting approximately 70 keynote 

and highlight lectures, 600 oral 

and 450 poster presentations, resulting 

in 10 parallel sessions. 

A highlight of this conference will be the 

seven invited plenary talks covering a 

wide range of topics. Julian Allwood 

from the University of Cambridge, UK 

will talk about sustainable materials, 

Claudia Ambrosch-Draxl of the Humboldt 

University of Leoben (Austria) about 

nanostructures and hybrid materials, 

Bruno Charles De Cooman of the 

Pohang Institute of Science and 

Technology (Korea) about strain hardening 

control in steel, Kristi Kiick from the 

University of Delaware (USA) about biomaterials, 

Christopher Schuh from the 

Massachusetts Institute of Technology 

(USA) about mechanical properties of 

amorphous alloys, Dwight Viehland from 

Virginia Tech (USA) about magnetoelectric 

composites, and Zhong Lin Wang 

from the School of Materials Science & 

Engineering Georgia (USA) about nanogenerators. 

The conference will be accompanied by 

a career workshop for young scientists, 

many other interesting side-events and 

last but not least an MSE party entitled 

"Young Researchers Meet Professionals" 

as a new approach to get together in a 

relaxed atmosphere. 

I am sure that we will have a very informative 

and interesting meeting and 

would like to encourage you and your 

colleagues to attend this conference and 

the exhibition that goes along with the 

event. 

I am looking forward to seeing you in 

Darmstadt in September. 

Sincerely yours, 

Eckhard Quandt 

Congress Chairman 

2

MSE Experts Committee 

Topic A: 

Functional Materials 

Topic E: 

Modelling 

Topic G: 

Materials Engineering in Australia 

Prof. Dr. 

Eckhard Quandt 

Christian-Albrechts- 

University of Kiel, 

Germany 

Prof. Dr. Karsten Albe 

Technische Universität 


Dr. Klaus-Dieter Liss, 

Australian Nuclear 

Science and Technology 

Organisation, 

Lucas Heights, Sydney, 

Australia 

Topic B: 

Structural Materials 

Topic F: 

Biomat 

Prof. Dr. Yuri Estrin 

Monash University, 

Melbourne, Australia 

Prof. Dr. 

Christoph Leyens 


Dresden, Germany 

Prof. Dr. 

Klaus D. Jandt 

Friedrich-Schiller- 

University of Jena, 

Germany 

Topic Y: 

Honorary Symposium 

Topic C: 

Processing 

Prof. Dr. Ralf Riedel 



Dr. Thomas F. Keller 

Friedrich-Schiller- 


Germany 

Prof. Dr. 

Dmitri Molodov 

RWTH Aachen 

University, Germany 

Topic D: 

Characterisation 

Prof. Dr. 

Anke Kaysser-Pyzalla 

Helmholtz-Zentrum 

Berlin für Materia lien 

und Energie GmbH, 

Berlin, Germany 

3

General Information 

Congress Office MSE 

Deutsche Gesellschaft 

für Materialkunde e.V. 

Anja Mangold, Yvonne Koall 

Senckenberganlage 10 

60325 Frankfurt 

P: +49-(0)69-75306 747 

mse@mse-congress.de 


List of Participants 

All participants are listed on the website: 


The list of participants will remain online 

after the congress. 

Lecture Presentation and Discussion 

Times 

- Plenary: 40 minutes 

(without discussion) 

- Keynote: 30 minutes 

(incl. 5 minutes of discussion) 

- Highlight Lecture and Lectures: 

15 minutes 

(incl. 3 minutes of discussion) 

- Oral Poster: 3 minutes 

(discussion in front of the poster) 

Programme Details 

7 Plenary Lectures 

44 Keynote Lectures 

28 Highlight Lectures 

500 Lectures 

110 Oral Posters 

299 Posters 

Your Personal Online-Programme 

The complete programme is available at: 


Compose your own personal programme 

at home by filling your shopping basket 

with your preferred presentations. To open 

your personal programme just hit the 

"Basket-Symbol" in the header of the browsing-programme 

page. Benefit from this 

unique congress planning tool! 

Book of Abstracts 

From the personal programme you may 

also create your own book of abstracts. 

After selecting your personal programme 

just hit the Link "print displayed abstracts". 

Your book of abstracts can be accessed 

up to 3 month after the congress. 

Poster Evening 

Wednesday, 19:00 - 21:00 h, Foyer, 

Karo5 

The poster evening on Wednesday will 

give poster authors the opportunity to be 

available in front of their poster in order 

to discuss their subject and respond to 

questions. Snacks and beverages will be 

offered. Delegates start meeting the authors 

at their posters after the lecture programme. 

Poster Award 

The best 3 posters will be awarded a 

poster prize that consists of a voucher 

from the publishing house Wiley-VCH. 

The winners will be identified by a jury. 

The Prizes will be announced on Thursday 

at 14:45 h in Lecture Hall A1. 

Poster Mounting/Dismantling Times 

Posters remain on display during the 

whole congress. 

Mountig Times: 

Mon, 24 Sept: 14:00 - 17:00 h 

Tue, 25 Sept: 7:00 - 9:00 

Dismantling Time: 

Thu, 27 Sept: from 18:30 h 

Authors Set-up 

Please notice that the laptop for each 

room will be provided on Tuesday morning 

at the general Authors Set-Up, between 

7.30 - 8.30 h and additionally 

each morning half an hour before the 

beginning of the first presentation. Please 

prepare your presentation on a CD or a 

USB-flash drive. If you prefer not to use 

the laptop provided by the conference 

office you can use your own laptop. 

MSE Party 

The MSE party takes place on Tuesday, 

18:30 - 23:00 h. Participation is included 

in the conference fee. 

Coffee Breaks 

Coffee will be served for free during the 

coffee breaks. Additional beverages, 

sandwiches and fruits may be purchased 

separately. 

Lunch 

Lunch is not included in the conference 

fee. There are several opportunities in the 

refectory and in the city centre nearby. 

Conference Fees 

Young Researchers up to 30 years (incl.) 

DGM-members: 150 Euro 

DGM-basic members: 165 Euro 

Non-members: 180 Euro 

Expert Researchers 31 - 40 years (incl.) 




Professionals University 




Industry 




Fees for the attendance of the Technical 

Programme are free of VAT. 

Conference Venues 

- MSE 2012 

TU Darmstadt, karo5, Karolinenplatz 5, 

64289 Darmstadt 

- MSE Side Events 

Welcome Hotel, Karolinenplatz 4, 


- Günter Gottstein Honorary Symposium 

BMBF-Side Event 

DGM-Tag2012 

Hessisches Staatsarchiv, Karolinenplatz 3 


Parking 

There is a car park at the Welcome Hotel 

that can be used at 10 EUR per day. 

4

Günter Gottstein Honorary Symposium 

Tuesday, 25 September - Thursday, 27 September 

Günter Gottstein Honorary Symposium 

on Characterisation and Design of 

Microstructure for Advanced Materials 

A special symposium in honor of Professor 

Günter Gottstein and his unique contributions 

to Materials Science. 

The symposium 

will focus on a series 

of related topics in 

which Professor 

Gottstein has shown 

particular interest and 

made significant contributions over the 

years, based on the general theme of 

Characterization and Design of Microstructure 

for Advanced Materials, and including: 

Characterization and control of 

microstructure and texture evolution; Crystal 

plasticity, deformation and recrystallization; 

Materials simulation and modeling; 

Thermodynamics and kinetics of 

grain boundaries. 

The detailed programme is available at: 

http://www.dgm.de/dgm/ 

mse-congress/php/specials_gottstein.php 

Venue: 

Staatsarchiv Darmstadt 

Tuesday 10:45 h - Thursday, 16:30 h 

Symposium Organizer: 

Prof. Dr. D. Molodov, 

RWTH Aachen 


Keynote Speakers 

Prof. R. Kirchheim, 

University of 

Goettingen, Germany 

Prof. W. Kaysser, 

GKSS Research 

Centre, Geesthacht, 

Germany 

Prof. W. Skrotzki, 



Prof. J.H. Driver, 

Ecole des Mines de 

Saint-Etienne, France 

Prof. P. Van Houtte, 

Katholieke Universiteit 

Leuven, Belgium 

Prof. M. Glicksman, 

University of Florida, 

Melbourne, USA 

Prof. D. Raabe, 

MPI für Eisenforschung, 

Düsseldorf, 

Germany 

Prof. J. Hirsch, 

HYDRO Al, Bonn, 

Germany 

Prof. T. Watanabe, 

Tohoku University, 

Sendai, Japan 

Prof. A.D. Rollett, 

Carnegie Mellon 

University, Pittsburgh, 

USA 

Prof. B. Hutchinson, 

Swedish Institute for 

Metals Research, 

Stockholm, Sweden 

Prof. Y. Estrin, 


Clayton, Australia 

Prof. P. Rios, 

Universidade Federal 

Fluminense, Brazil 

Prof. 

L.S. Shvindlerman, 

ISSP, Russian Academy 

of Sciences, 

Russia 

Sponsored by: 

5


Monday, 24 September 


Tuesday, 25 September 

Tuesday, 25 September 


Montag, 24. September 2012 

13:00 - 23:00 Uhr 

Hessisches Staatsarchiv Darmstadt 

Karolinenplatz 3, 64289 Darmstadt 

- in German - 

13:00 Uhr 

DGM-Mitgliederversammlung 

16:00 Uhr 

DGM-Preisverleihung 

19:30 Uhr 

DGM-Gesellschaftsabend 

DGM-DFG Side Event 

DGM und DFG diskutieren über die 

Konsequenzen der Energiewende für das 

Fachgebiet MatWerk 

Dienstag, 25. September 2012 

11:00-12:00 Uhr 

Welcome Hotel 


- in German - 

Gemeinsam mit Prof. Kleiner, dem 

Präsidenten der Deutschen Forschungs - 

gemeinschaft (DFG), und ausgewählten 

Podiumsteilnehmern sind die Teilnehmer 

eingeladen, darüber zu diskutieren, welche 

Auswirkung die Energiewende für die 

Entwicklungen in unserem Fachgebiet hat 

und wie dieses auf die daraus resultierenden 

Heraus forderungen reagieren muss. 

Prof. Dr.-Ing. Kleiner ist seit 2007 Prä - 

sident der DFG. Sein Fachgebiet ist die 

Produktionstechnik. Er wurde mehrfach 

aus gezeichnet und ist seit zwei Jahren 

Träger des Bundesverdienstkreuzes 

1. Klasse. Kleiner spricht auch das 

Grußwort zur Eröffnung der MSE. 

Weitere Teilnehmer der Plenardiskussion: 

Dr. Julian Allwood, University of 

Cambrigde, UK 

Dr. Jörg Esslinger, MTU Aero Engines 

GmbH, München 

Dr. Ursula Eul, Fraunhofer Institut für 

Betriebsfestigkeit und Systemzuverlässigkeit, 

Darmstadt (angefragt) 

Dr.-Ing. Ulrich Hartmann, Wieland-Werke 

AG, Ulm 

Prof. Dr.-Ing. Jürgen Hirsch, Hydro 

Aluminium Rolled Products GmbH, Bonn 

Prof. Dr. Wolfram Jägermann, Technische 

Universität Darmstadt 

Prof. Dr.-Ing. Anke Kaysser-Pyzalla, 

Helmholtz-Zentrum Berlin für Materialien 

und Energie GmbH 

Dr. Johannes Lambertz, RWE Power AG, 

Essen 

Ulrich Langnickel, VGB PowerTech e.V., 

Essen 

Prof. Dr. Christoph Leyens, Technische 

Universität Dresden 

Prof. Dr.-Ing. Detlef Löhe, Karlsruher Institut 

für Technologie 

acatech Side Event 

Werkstofftechnische Herausforderungen 

der Energiewirtschaft 

Dienstag, 25. September 2012 

13:00 - 16:30 Uhr 

Welcome Hotel 


- in German - 

Werkstoffinnovationen spielen eine zentrale 

Rolle bei der Entwicklung neuer Techno - 

logien für nahezu alle Lebensbereiche und 

Wirtschaftszweige. Auch der erfolgreiche 

Umstieg auf Erneuerbare Energien wird 

davon abhängen, dass die Herausforde - 

rungen auf den Gebieten der Energie - 

erzeu gung, der Energiespeicherung und 

des Energietransports werkstoffseitig 

begleitet werden. Die Verfügbarkeit leistungsfähiger 

und kostengünstiger Werk - 

stoffe befördert zudem die Energie - 

effizienz von Produkten und industriellen 

Verarbeitungsprozessen. 

Auf der diesjährigen Tagung "Materials 

Science and Engineering" sollen diese 

Entwicklungsbedarfe im Rahmen eines 

Side Event des acatech Themennetzwerks 

Materialwissenschaft & Werkstofftechnik 

adressiert werden. 

Das Side Event bringt relevante Akteure 

der M & W aus Wissenschaft und 

Wirtschaft zusammen, um die technologischen 

Herausforderungen in der 

Werkstoffentwicklung zu diskutieren und 

notwendige Schritte zur erfolgreichen 

Realisierung zu definieren. 

6


Wednesday, 26 September 

Wednesday, 26 September 

BMBF Side Event 

Multimaterialsysteme fügen – Neue 

Herausforderungen im Leichtbau 

Mittwoch, 26. September 2012, 

09:00 Uhr - 12:30 Uhr 

Hessisches Staatsarchiv 


(gegenüber dem Welcome Hotel) 

- in German - 

Konsequenter Leichtbau leistet einen Bei - 

trag zum nachhaltigen Wirtschaften und 

bietet überall dort Vorteile, wo aufgrund 

der Gewichtsreduzierung des Materials 

Energieeinsparungen, Kraftreduzierungen 

oder eine höhere Beschleunigung bei 

bewegten Massen erzielt werden. 

Deutschland hält im internationalen Ver - 

gleich in der Entwicklung und Verarbei - 

tung von Leichtbausystemen und -materialien 

auch dank langfristiger Förderung 

durch das Bundesministerium für Bildung 

und Forschung (BMBF) eine Spitzen - 

stellung. 

Im Rahmen des BMBF-Programmes 

"Werkstoffinnovationen für Industrie und 

Gesellschaft – WING" bzw. den Vorläu - 

ferprogrammen wurden mehrere Förder - 

maßnahmen durchgeführt, zuletzt zum 

"Funktionsintegrierten Leichtbau". Derzeit 

laufen die Projekte zum Thema "Multi - 

material systeme - Zukünftige Leichtbau - 

weisen für ressourcensparende Mobilität". 

Fügetechnologien besitzen dabei eine 

Schlüsselfunktion für den erfolgreichen 

Einsatz von Leichtbaumaterialien und 

Multimaterialsystemen. Die thematischen 

Schwerpunkte liegen im Automobilbau, 

Flugzeugbau sowie im Nutz- und 

Schienenfahrzeugbau. Deshalb stehen die 

Fügetechnologien im Fokus des Side 

Events. 

Organisation des Side Events: 

Projektträger VDI Technologiezentrum 

GmbH und Projektträger Jülich 

5. Nachwuchs-Karriereworkshop 

der DGM und der BV MatWerk 

Mittwoch, 26. September 2012 

10:00 - 15:00 Uhr 

Welcome Hotel 


- in German - 

10:00 Uhr 

Begrüßung und Eröffnung 

Prof. Pedro Dolabella Portella 

Generalsekretär der BV MatWerk, BAM, 

Berlin 

10:10 Uhr 

Wissenschaft mit Migrationshintergrund: 

Muss man im Ausland gewesen sein? 

Prof. Pedro Dolabella Portella 

Generalsekretär der BVMatWerk, BAM, 

Berlin 

10:20 Uhr 

Karriere in der Wissenschaft II 

Prof. Christine Selhuber-Unkel 

Christian-Albrechts-Universität zu Kiel 

10:40 Uhr 

Karriere in der Wissenschaft III 

Prof. Martin Wagner 

TU Chemnitz 

11:00 Uhr 

Karriere in der Industrie: Was sollten Sie 

können? Welche persönlichen Eigenschaften 

bringen Sie weiter? 

Dr. Tanja Eckardt 

Heraeus Holding GmbH, Hanau 

11:20 Uhr 

Karriere in der Industrie II 

Dr. Frank Klose 

Salzgitter Mannesmann Forschung GmbH 

11:50 Uhr 

Selbstständigkeit 

Dr. Jörg Wiesmann 

Managing Director, incoatec GmbH, 

Geesthacht 

Vorstellung des weiteren Programms und 

Aufteilung der Teilnehmer auf Raum A und 

Raum B zur Parallelveranstaltung mit 

Plenardiskussion 

Vorstellung des weiteren Programms und 

Aufteilung der Teilnehmer auf Raum A und 

Raum B zur Parallelveranstaltung mit 

Plenardiskussion 

13:00 Uhr 

Parallelveranstaltung mit Plenardiskussion 

Raum A: Karriere in Wissenschaft und 

Ausland 

Raum B: Karriere in Industrie und 


13:50 Uhr 

Raumwechsel 

Parallelveranstaltung mit Plenardiskussion 

Raum A: Karriere in Wissenschaft und 

Ausland 

Raum B: Karriere in Industrie und 


15:00 Uhr 

Ende der Veranstaltung 

12:10 Uhr Mittagspause 

7


Technische Universität Darmstadt 

Karo5, Lecture Room A1 

Tue 

10:00 

Sustainable Materials: Priorities for material science 

J. Allwood, University of Cambrigde, UK 

Chair: J. Rödel, Technische Universität Darmstadt, Germany 

In response to the challenge of future Sustainability, many Materials Scientists believe that their contribution will be 

through the invention of new materials. This talk will challenge this view. Current global and national targets for greenhouse 

gas emissions reductions in industry can be related to targets for the main materials processing industries. This 

demonstrates that production of just five material groups - steel, cement, plastics, paper and aluminium - dominates 

industrial emissions. Furthermore, producers of these materials already pay heavily for energy, so there are few remaining 

opportunities for energy efficiency. As a result, meeting industrial emissions targets requires a substantial 

reduction in global production of new material, which requires an improvement in recycling and the pursuit of material 

efficiency - using less new material to provide the same services. An overview of these strategies and several recent 

case studies will be presented, as a basis for making recommendations for future contributions from material science. 

In particular, new extractive processes could enhance the value of liquid metal from mixed alloy streams, and intelligent 

design could support product life extension and direct component reuse. The talk will draw on the experience of 

the £1.5m WellMet2050 project at the University of Cambridge which has led to recent publication of the book 

"Sustainable materials: with both eyes open". 

Julian Allwood leads the Low Carbon and Materials Processing research group in the Department of Engineering at the 

University of Cambridge (lcmp.eng.cam.ac.uk). The first 10 years of his career were funded by contracts with the 

Alcoa Technical Centre in Pittsburgh. In 1996 he was appointed as a lecturer in mechanical engineering at Imperial 

College, and moved to Cambridge in 2000. His research group, currently 15 people, focuses on the technologies and 

systems of energy, material and resource efficiency, largely related to metals. Current projects include exploration of 

material efficiency in metals, development of novel metal forming processes, technologies for toner print removal to 

allow paper-reuse, identification and evaluation of options for future carbon emissions reductions in consumer goods, 

and development of an online tool for visualising future global and regional resource scenarios. 

He is a vice Chairman of the International Academy of Production Engineering (CIRP), and since 2007 has been joint 

editor-in-chief of the Journal of Materials Processing Technology. He is a Lead Author for the the IPCC’s 5th Assessment 

Report, with a focus on mitigation in industry. In 2008 he was awarded a 5-year £1.4m EPSRC Leadership Fellowship 

to lead a major project on the global carbon emissions targets for steel and aluminium in collaboration with a consortium 

of 20 global companies spanning the metals supply chain (www.wellmet2050.com). This has led to the book 

“Sustainable Materials: with both eyes open” co-authored with Jonathan Cullen, published by UIT press in 2012 and 

available online at www.withbotheyesopen.com. 

8




Tue 

13:45 

Strain Hardening Control in Ultra-fine Grained (UFG) Steel for Automotive Applications 

B.C. De Cooman, Pohang Institute of Science and Technology, Korea, Republic 

Chair: R. Riedel, Technische Universität Darmstadt, Germany 

The strength of pure metals can be increased considerably by grain size reduction, and the properties of ultra-fine to 

nanometer (




Wed 

08:30 

The Multiscale Challenge of Metallic Glass Deformation 

C.A. Schuh, Massachusetts Institute of Technology, Cambridge, MA, USA 

Chair: C. Leyens, Technische Universität Dresden, Germany 

The exceptional mechanical properties of amorphous metals – high strength and elastic limit, potentially significant 

toughness and fatigue resistance – have inspired a great deal of engineering interest. However, the structure-property 

connections in this class of materials are difficult to fully explore, in part because of the vast spectrum of scales that 

are apparently involved. From elementary atomic motions in shear transformation zones (STZs), with scales on the 

order of 10 -8 m and 10 -12 s, to global plastic “shear banding” events that span up to 10 -4 m and 10 -3 s, there is a 

large gap in the basic understanding of how local pockets of deformation interact and assemble to produce global 

deformation. This talk will review our approach to modeling the processing and deformation of disordered materials at 

the meso-scale: “shear transformation zone dynamics” or simply “STZ dynamics”. Beginning with coarse-grained 

groups of atoms that are mapped onto elements on a finite-element mesh, we explore the activated dynamics of STZs 

across many orders of magnitude in length and time scales. We also incorporate internal structural state variables, 

such as free volume, so that the evolution of structure during deformation can be examined and mapped to experimental 

results. The prospect for future integration with atomistic and continuum models will also be discussed. 

Christopher A. Schuh is the Department Head and the Danae and Vasilis Salapatas Professor of Metallurgy in the 

Department of Materials Science and Engineering at MIT. He joined MIT in 2002, having received a B.S. degree at the 

University of Illinois at Urbana-Champaign, and a Ph.D. at Northwestern University, both in the field of Materials 

Science and Engineering. Prof. Schuh also held the Ernest O. Lawrence postdoctoral fellowship at Lawrence Livermore 

National Laboratory. Prof. Schuh’s research is focused on structural metallurgy, and seeks to control disorder in metallic 

microstructures for the purpose of optimizing mechanical properties. Prof. Schuh has published more than 140 

papers in scientific journals, and his research has received international attention through several awards, including the 

Robert Lansing Hardy Medal of the Metals, Minerals, and Materials Society. Prof. Schuh co-founded Xtalic Corporation, 

a technology spin-out company that has commercialized a new process for dynamically controlling the nanostructure in 

electrodeposited metals, with applications ranging from automotive and machine components to electronics. In 2011, 

Prof. Schuh was named a MacVicar Fellow of MIT, recognizing his contributions to engineering education. 

10




Wed 

14:00 

Polysaccharide- and Protein-Based Responsive Biomaterials 

K. Kiick, University of Delaware, Newark,DE, USA 

Chair: K. Jandt, Friedrich-Schiller-Universität Jena, Germany 

We have employed a combination of biosynthetic tools, bioconjugation strategies and biomimetic assembly in the 

design of new materials for biomaterials applications including cardiovascular therapies and drug delivery. In earlier 

work, we have demonstrated that the interactions of heparin-modified glycopolymers with heparin-binding peptides and 

proteins can be used in the formation of hydrogels. The release of growth factors from these materials, in response to 

growth-factor receptors, provides a novel mechanism for targeted delivery via delivery-mediated erosion, and has been 

demonstrated in vitro4 and in cell culture. We have also demonstrated that moderate changes in the elastic shear 

moduli of related heparinized materials result in marked differences in the adhesion, proliferation, and phenotypes of 

cardiovascular cells, suggesting long-term, potentially simple strategies for engineering desired cellular outcomes at select 

locations in vivo. We are expanding these approaches to include new strategies for controlling hydrogel mechanical 

properties. Our recent investigations have suggested the utility of two new classes of hydrogels. One produced with 

elastomeric polypeptides provides strategies for encapsulation of stem cells and aortic adventitial fibroblasts in the 

engineering of mechanically active tissues, and another highlights the promise of thiol-based adducts in controlling selective 

degradation of the hydrogels, which has potential application in both tissue engineering and drug delivery. 

Ultimately, our investigations will elucidate how the interactions of specific cells with these materials can be modulated. 

These architectures may therefore be employed to develop hydrogels with controlled properties useful for a 

variety of applications in biomaterials. 

Kristi Kiick is a Professor of Materials Science and Engineering and a Professor of Biomedical Engineering at the 

University of Delaware (UD), and has recently been named Deputy Dean of the UD College of Engineering. She joined 

the UD faculty in August 2001. She received a B.S. in Chemistry from the University of Delaware in 1989, and an 

M.S. in Chemistry as an NSF Predoctoral Fellow from the University of Georgia in 1991. In 1996, after working in 

industry at Kimberly Clark Corporation, she rejoined the academic ranks as a doctoral student. She received a Ph.D. in 

Polymer Science and Engineering from the University of Massachusetts Amherst in 2001 under the direction of David 

Tirrell, after completing her doctoral research as an NDSEG Fellow at the California Institute of Technology. Her current 

research programs are focused on combining biosynthetic techniques, chemical methods, and bioinspired assembly strategies 

for the production of novel polymer architectures with advanced multifunctional behaviors. Kiick has recently 

been named an AIMBE Fellow, and serves on the editorial advisory boards of multiple journals. She has published over 

75 articles and book chapters, and holds over 15 US patents. 

11




Wed 

18:15 

Nanogenerators for self-powered systems and piezotronics for active flexible electronics 

Z.L. Wang, School of Materials Science & Engineering Georgia, Atlanta, USA 

Chair: K. Albe, Technische Universität Darmstadt, Germany 

Developing wireless nanodevices and nanosystems is of critical importance for sensing, medical science, environmental/infrastructure 

monitoring, defense technology and even personal electronics. It is highly desirable for wireless 

devices to be self-powered without using battery, without which most of the sensor network may be impossible. The 

piezoelectric nanogenerators developed by us have the potential to serve as self-sufficient power sources for 

micro/nano-systems. For Wurtzite structures that have non-central symmetry, such as ZnO, GaN and InN, a piezoelectric 

potential (piezopotential) is created in the crystal by applying a strain. The nanogenerator is invented by using the 

piezopotential as the driving force for electrons to flow in responding to a dynamic straining of piezoelectric nanowires. 

A gentle straining can produce an output voltage of up to 20-40 V from an integrated nanogenerator. 

Furthermore, piezopotential in the wurtzite structure can serve as a “gate” voltage that can effectively tune/control 

the charge transport across an interface/junction; electronics fabricated based on such a mechanism is coined as piezotronics, 

with applications in force/pressure triggered/controlled electronic devices, sensors, logic units and memory. 

By using the piezotronic effect, we show that the optoelectronc devices fabricated using wurtzite materials can have 

superior performance as solar cell, photon detector and light emitting diode. Piezotronic is likely to serve as a “mechanosensation” 

for directly interfacing biomechanical action with silicon based technology and active flexible electronics. 

[1] Wang and Song, Science, 312 (2006) 242. 

[2] Wang et al., Science, 316 (2007) 102. 

[3] Qin et al., Nature, 451 (2008) 809. 

[4] Yang et al., Nature Nanotechnology, 4 (2009) 34-39. 

[6] Z.L. Wang, Nano Today 5 (2010) 540. 

[7] Wu et al., Adv. Materials, 22 (2010) 4711. 

[8] Hu et al., ACS Nano, 4 (2010) 1234. 

[9] Yang et al., Nano Letters, 11 (2011) 4012. 

[10] Z.L. Wang, Adv. Mater., DOI: 10.1002/adma.201104365. 

[11] for details: www.nanoscience.gatech.edu 

Dr. Zhong Lin (ZL) Wang received his PhD from Arizona State University in transmission electron microscopy. He now is 

the Hightower Chair in Materials Science and Engineering, Regents' Professor, Engineering Distinguished Professor and 

Director, Center for Nanostructure Characterization, at Georgia Tech. Dr. Wang has made original and innovative contributions 

to the synthesis, discovery, characterization and understanding of fundamental physical properties of oxide 

nanobelts and nanowires, as well as applications of nanowires in energy sciences, electronics, optoelectronics and 

biological science. His discovery and breakthroughs in developing nanogenerators establish the principle and technological 

road map for harvesting mechanical energy from environment and biological systems for powering a personal electronics. 

His research on self-powered nanosystems has inspired the worldwide effort in academia and industry for studying 

energy for micro-nano-systems, which is now a distinct disciplinary in energy research and future sensor networks. 

He coined and pioneered the field of piezotronics and piezo-phototronics by introducing piezoelectric potential gated 

charge transport process in fabricating new electronic and optoelectronic devices. This breakthrough by redesign CMOS 

transistor has important applications in smart MEMS/NEMS, nanorobotics, human-electronics interface and sensors. Dr. 

Wang’s publications have been cited for over 48,000 times. The H-index of his citations is 105. Dr. Wang was elected 

as a foreign member of the Chinese Academy of Sciences in 2009, member of European Academy of Sciences in 

2002, fellow of American Physical Society in 2005, fellow of AAAS in 2006, fellow of Materials Research Society in 

2008, fellow of Microscopy Society of America in 2010, and fellow of the World Innovation Foundation in 2002. He 

is an honorable professor of over 10 universities in China and Europe. He received 2011 MRS Medal from the 

Materials Research Society, 1999 Burton Medal from Microscopy Society of America, 2001 S.T. Li prize for 

Outstanding Contribution in Nanoscience and Nanotechnology, and the 2009 Purdy Award from American Ceramic 

Society. Details can be found at: http://www.nanoscience.gatech.edu 

12




Thu 

08:30 

From Concepts of Theoretical Physics to a Library of Yet Unknown Hybrid Materials 

C. Draxl, Humboldt-Universität zu Berlin, Germany 

Chair: A.R. Kaysser-Pyzalla, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Germany 

Finding better or even novel functional materials is critical for nearly every aspect of our society. Solid-state theory 

combined with computational materials science can provide detailed insight into properties and processes and thus contribute 

to the discovery of new materials. To reach this goal, reliable tools are a prerequisite. With the examples of 

photovoltaics and opto-electronics, I will show how first-principles calculations, comprising density-functional theory and 

methods going beyond, can be used to comprehensively describe hybrid structures – from their composition and geometry 

to their opto-electronic excitations – and I will discuss what needs to be done to achieve predictive power. In this 

context, I will present a concept for a searchable database of so far unknown materials – suggested and characterized 

by extensive calculations. 

Claudia Draxl currently holds the Chair of Solid-State Theory at the Humboldt-Universität zu Berlin in Germany. She 

received a degree in mathematics and physics and a PhD in Theoretical Physics from the University Graz. She worked 

as an assistant professor and Head of the Institute for Theoretical Physics at the University Graz and as a guest professor 

at Uppsala University in Sweden. In 2005 she was appointed Chair of Atomistic Modelling and Design of Materials 

at the University of Leoben in Austria. Her research includes method and code development in computational materials 

science, density functional theory, many-body perturbation theory and theoretical spectroscopy. 

Prof Draxl has received several awards, including the honorary doctorate of Uppsala University, the Science Award of 

the Federal State of Styria and the Ludwig-Boltzmann award for theoretical physics by the Austrian Physical Society. 

Moreover, she is the first woman to be named Einstein Professor at the Humboldt-Universität zu Berlin. Among other 

professional activities, Prof Draxl was Head of the working group Women in Physics of the ÖPG from 2000 – 2006 

and a scientific board member of the Austrian Science Fund FWF from 2008 – 2011. 

13




Thu 

14:00 

Magnetoelectric Laminate Composites 

Dwight Viehland and Jiefang Li, Virginia Tech, Blacksburg, USA 

Chair: E. Quandt, Christian-Albrechts-Universität zu Kiel, Germany 

Our research group has developed new generations of composites consisting of piezoelectric layers bonded to magnetostrictive 

ones. These laminated composites have giant magnetoelectric effects, which can reach values of 50V/cm- 

Oe at quasi-static frequencies and of >1000V/cm-Oe at the electromechanical resonance in PMN-PT/Metglas heterostructures. 

We will show the importance aspects of the laminate sensor which lead to optimum properties, including: 

materials couple, size, aspect ratio, number of layers, electrode geometry, bonding agent, amongst others. A theoretical 

model has been successful developed which allows us to reasonable predict changes in the value of ±ME with 

these various laminate parameters, which can assist in further design advancements. We have also performed a systematic 

investigation of the equivalent magnetic noise floor which determines the limitation of the sensor performance, 

including both experimental investigations of the power spectral density and a noise model. 

Dwight Viehland is currently in the Department of Materials Science and Engineering at Virginia Tech. He received B.S. 

and M.S. degrees from the University of Missouri-Rolla, and a Ph.D. from the Pennsylvania State University. Dwight is 

an experimental solid state scientist in the structure and properties of condensed matter and thin layers. His research 

focuses on sensor materials including magnetoelectricity, piezoelectricity, and magnetostriction. Since joining Virginia 

Tech, his laboratory began a new area of research that involved the development of novel materials/composites with 

large magneto-electric exchanges. Dwight has published over 390 refereed journal articles, together with about 

12,000 citations. 

14

MSE 2012 Symposium Organisers 

Topic A 


A1 - High-Temperature 


H. Fritze, 

Technical University of 

Clausthal, Goslar, 

Germany 

A3 - Magnetic Shape Memory Alloys and 

Multiferroics 

S. Fähler, 

Leibniz Institute for 

Solid State and 

Materials Research 


A6 - Modern Aspects in Structural Phase 

Transformations 

H. Emmerich, 

Universität Bayreuth, 

Germany 

V. Kolarik, 

Fraunhofer Institute for 

Chemical Technology, 

Pfinztal, Germany 

E. Quandt, 

Christian-Albrechts- 

University of Kiel, Germany 

E. Oberaigner, 

University of Leoben, 

Austria 

S. Kulkov, Tomsk State 

University, Russia 

A2 - Stimuli Sensitive Polymers 

A. Lendlein, 


Geesthacht, Germany 

D. Cohn, 

Hebrew University of 

Jerusalem, Israel 

A4 - Functional Nanoparticles 

W. Peukert, 

Friedrich-Alexander- 

Universität Erlangen- 

Nürnberg, Germany 

R.F. Singer, 




A5 - Electrical Fatigue of Functional 

Materials 

J. Rödel, 



E. Gamsjäger, 

University of Leoben, 

Austria 

A7 - Advanced Materials for Lithium Ion 

Batteries 

H.J. Seifert, 

Karlsruhe Institute of 

Technology, Eggenstein-Leopoldshafen, 

Germany 

15


Topic B 

Structural Materials 

B1 - Intermetallics: Physical Metallurgy, 

Processing and Characterisation 

F. Appel, 



B2 - Advanced Steels for Structural and 

Functional Applications 

H. Biermann, 


Freiberg, Germany 

B4 - Mechanical Properties and 

Microstructure 

M. Heilmaier, 

Karlsruher Institut für 

Technologie, Germany 

M. Oehring, 



W. Bleck, 

RWTH Aachen 


E. Kerscher, 


Kaiserslautern, Germany 

J. Paul, 



W. Mao, 

University of Science 

and Technology, 

Beijing, China 

T. Halle, 

Chemnitz University of 

Technology, Germany 

H.-J. Hoffmann, 



M.F.-X. Wagner, 



C. Krempaszky, 


Munich, Germany 

C. Schwarz, 



B5 - Very High Cycle Fatigue 

H.-J. Christ, 

Universität Siegen, 

Germany 

B3 - Glasses and Optical Materials 

L. Wondraczek, 




16


Topic B 

Structural Materials (cont.) 

Topic C 

Processing 

B6 - Hybrid Structures 

W. Hufenbach, 



B8 - Hydrogen Embrittlement (HE) 

T. Michler, 

Adam Opel AG, 

Rüsselsheim, Germany 

C1 - Nanomaterials and Composites 

K.-H. Haas, 

Fraunhofer Institute for 

Silicate Research, 

Würzburg, Germany 

A.S. Herrmann, 

Faserinstitut Bremen 

e.V., Germany 

T. Heber, 



N. Modler, 



B9 - Light Weight Metallic Alloy 

W. Xie, 

Stolfig GmbH, 

Geisenfeld, Germany 

I. Vicario, 

Fundación Tecnalia, 

San Sebastian, Spain 

C2 - Materials for Additive 

Manufacturing Technologies 

R. Gadow, 

University of Stuttgart, 

Germany 

F. Kern, 


Germany 

J. Stampfl, 

Vienna Technical 

University, Austria 

B7 - Bulk Ultrafine- and Nanostructured 


M. Hockauf, 



B. Baufeld, 

Katholieke Universiteit 

Leuven, Belgium 

M. Wagner, 



C3 - Joining 

G. Weber, 

Federal Institute for 

Materials Research 

and Testing, Germany 

M. Ferraris, 

Politecnico di Torino, 

Italy 

17


Topic D 


C4 - Coatings and Thin Films 

J. Vetter, 

Sulzer Metaplas, 

Bergisch Gladbach, 

Germany 

C6 - Printed Electronics 

W. Jaegermann, 



D1 - New Techniques in Microstructure 


C. Hébert, 

Ecole Polytechnique 

Fédérale de Lausanne, 

Switzerland 

M. Willert-Porada, 

University of Bayreuth, 

Germany 

T. Mayer, 



A. Froideval Zumbiehl, 

Paul Scherrer Institute, 

Villigen, Switzerland 

M. Stüber, 



C5 - Laser and Plasma Processing 

Methods 

X.F. de la Fuente Leis, 

Universidad de 

Zaragoza, Spain 

A.R. González-Elipe, 

Universidad de 

Sevilla, Spain 

E. Dörsam, 



C7 - Processing of Nanomaterials 

S. Mathur, 

University of Cologne, 

Germany 

D2 - Advanced Mechanical 


H.J. Maier, 

University of 

Paderborn, Germany 

K.B. Yeap, 

Fraunhofer-Institut für 

Zerstörungsfreie 

Prüfverfahren, Dresden, 

Germany 

E. Zschech, 

Fraunhofer-Institut für 

Zerstörungsfreie 

Prüfverfahren, Dresden, 

Germany 

A. Braun, 

Swiss Federal Laboratories 

for Materials 

Testing and Research, 

Dübendorf, Switzerland 

18


Topic D 

Characterisation (cont.) 

Topic E 

Modelling 

D3 - Reliability Issues and Characterisation 

in the Micro-Nano-Region 

B. Michel, 

Fraunhofer ENAS, 

Chemnitz, Germany 

E1 - Through Process-Modelling 

V. Schulze, 



E4 - Transport Phenomena in Nanoscale 

Devices 

P. Zahn, 


Dresden-Rossendorf, 

Germany 

A. Dommann, 

CSEM, Neuchatel, 

Switzerland 

B. Nestler, 

Karlsruhe University of 

Applied Sciences, 

Germany 

G. Fagas, 

Tyndall National 

Institute, Cork, Ireland 

T. Boehlke, 



A. Asenov, 

University of Glasgow, 

UK 

E2 - Computational Thermodynamics 

and Kinetics 

I. Steinbach, 

Ruhr-University 

Bochum, Germany 

H.J. Seifert, 


Technology, Eggenstein-Leopoldshafen, 

Germany 

S. Gemming, 


Dresden-Rossendorf, 

Germany 

G. Seifert, 



E3 - Multiscale Modelling of Mechanical 

Properties 

J. Neugebauer, 

Max-Planck-Institut für 

Eisenforschung 

GmbH, Düsseldorf, 

Germany 

A. Hartmaier, 

Ruhr-University 


19


Topic F 

Biomat 

F1 - Biomaterials Applications 

A.R. Boccaccini, 

University of Erlangen- 


F3 - Bio-Inspiration and Bio-Engineering 

P. Fratzl, 

Max Planck Institute 

of Colloids and Interfaces, 

Potsdam, Germany 

F4 - Bio-Interfaces and Coatings 

T.F. Keller, 

Friedrich Schiller 


Germany 

I. Roy, 

University of 

Westminster, London, 

UK 

I. Burgert, 

ETH Zürich, 

Switzerland 

K. Rezwan, 

University of Bremen, 

Germany 

F2 - Cell-Instructive and Nano- 

Biomaterials 

C. Selhuber-Unkel, 

University of Kiel, 

Germany 

B. Su, 

University of Bristol, 

UK 

T. Scheibel, 

Universität Bayreuth, 

Lehrstuhl für Biomaterialien, 

Germany 

J. Bill, 


Germany 

R. Krastev, 

University of Tübingen, 

Germany 

V. Bucher, 

University of Tübingen, 

Germany 

A. Gigler, 

Ludwig-Maximilians- 

Universität 

München/Siemens 


F5 - Materials for Bone-Tissue-Regeneration 

R. Schnettler, 

Universitätsklinikum 

Gießen und Marburg, 

Germany 

B. Garipcan, 

Bogaziçi University, 

Instanbul, Turkey 

20


Topic G 

Materials Engineering in Australia 

Topic Y 

Honorary Symposium 

G1 - Materials Engineering in Australia 

K.-D. Liss, 

Australian Nuclear 

Science and Tech no - 

logy Organisation, 

Lucas Heights / 

Sydney, Australia 

Y1 - Günter Gottstein Honorary Symposium 

on Characterisation and Design of 

Microstructure for Advanced Materials 

D. Molodov, 

RWTH Aachen 


Y. Estrin, 



J. Eckert, IFW Dresden, 

Germany 

21

List of Exhibitors 

Heraeus Holding GmbH 

Heraeusstr. 12-14 

63450 Hanau 

Germany 

http://www.heraeus.com 

Atomic Force F&E GmbH 

Hauptstrasse 161 

68259 Mannheim 

Germany 

http://www.atomicforce.de/ 

Metatech GmbH 

Lünener Str. 211/212 

59174 Kamen 

Germany 

http://www.meta-tech.de/ 

L.O.T. Oriel 

Im Tiefen See 58 


Germany 

http://www.lot-oriel.com/ 

Wiley-VCH 

Boschstr. 12 

69469 Weinheim 

Germany 

http://www.wiley-vch.com/ 

Maney Publishing 

Joseph's Well, Hanover Walk 

LS3 1AB Leeds 

GB 

http://www.maney.co.uk/ 

71

am 

Tuesday 

Symposium: A2 

Symposium: A6 

Symposium: B1 

Symposium: B3 

Symposium: C5 

Room: A01- Basement 

Room: A02- Basement 

Room: A1 -GroundFl. 

Room: A04 - Basement 

Room: A03 -Basement 

Stimuli Sensitive Polymers 

Modern Aspects in 

Structural Phase 


Intermetallics: Physical 

Metallurgy, Processing and 


Glasses and Optical 


Laser and Plasma 

Processing Methods 

Stimuli Sensitive Polymers 1 

Structural pahse transformations by 

means of phase field modeling 

Constitution and Microstructure 

Glassy state, glass transition and 

dynamics 

Laser processing 

A. Lendlein, Helmholtz-Zentrum 

Geesthacht, Teltow (Germany) 

E. Oberaigner, Montanuniversität 

Leoben (Austria) 

F. Appel, Helmholtz-Zentrum 

Geesthacht (Germany) 


Friedrich-Alexander-Universität 

Erlangen-Nürnberg (Germany) 

X. de la Fuente Leis, Universidad de 

Zaragoza (Spain) 

10:45 

Keynote Lecture 

Temperature and Shape 

Memory of Polymer 

Nanocomposites 

P. Poulin, University Bordeaux, 

(France) 


Shape-memory alloys: 

some recent developments 

on 3D constitutive modeling 

and biomedical device 

investigation 

F. Auricchio, Universita' di Pavia 

(Italy) 


Crystal Structure and 

Deformation of Long Period 

Stacking Ordered 

Intermetallic Phases in the 

Mg-Al-Gd System 

H. Inui, Kyoto University, Kyoto, 

Japan; K. Kishida, Kyoto University, 

Kyoto, Japan; H. Yokobayashi, 

Kyoto University, Kyoto, Japan; A. 

Takahashi, Kyoto University, Kyoto, 

Japan 

Thermodynamics of 

Vitreous Transition in Fragile 

Glass-forming Melts 

Robert F. Tournier 

Centre National de la Recherche 

Scientifique, Université Joseph 

Fourier, Consortium de Recherches 

pour l’Emergence de Technologies 

Avancées, B.P. 166, 38042 


Laser fabrication of complex 

shaped microoptical 

components and closely 

packed arrays of them 

A. Zukauskas, Department of 

Quantum Electronics, Vilnius 

University, Vilnius, Lithuania, 

M. Malinauskas, Department of 

Quantum Electronics, Vilnius 

University, Vilnius, Lithuania, 

11:00 

Understanding the Problem 

of Fatigue in Bulk Metallic 

Glasses 

J. J. Kruzic, Oregon State University, 

Corvallis, OR, USA; R. Busch, 

Universität des Saarlandes, 

Saarbrücken, Germany 

11:15 

Surface-attached polymer 

gels that can be reversibly 

switched with respect to 

chemical and optical 

proprties by light. 

M. Biesalski, H. Schenderlein, M. 

Rehahn, A. Brunsen, 



Microelastic-plastic 

phase-field modeling 

H. Emmerich, University of Bayreuth, 

Bayreuth, Germany 

Melting of Intrinsic Growth 

Nuclei by Liquid 

Homogeneous Nucleation 

instead of Surface Melting 

Robert F. Tournier, Centre National 

de la Recherche Scientifique, 

Université Joseph Fourier, 

Consortium de Recherches pour 

l’Emergence de Technologies 

Avancées, Grenoble, France 

Thermodynamic prediction 

of the mechanical properties 

of multicomponent oxide 

glasses from 

crystallographic data of 

single crystals 

R. Conradt, RWTH Aachen 

University, Aachen, Germany 

Laser induced 

nano-structuring of 

Ti-6Al-4V for improved 

adhesive bonding 

A. Kurtovic, EADS Innovation 

Works, Munich, 

Germany/University of Paderborn, 

Paderborn, Germany; E. Brandl, EADS 

Innovation Works, Munich, 

Germany; T. Mertens, EADS 

11:30 

Photo-stimulation of 

low-toxicity biopolymers in 

additive manufacturing 

J.Stampfl ,J.Torgersen, 

A.Ovsianikov, X.Qin, Z.Li, TU Wien, 

Vienna, Austria, S.Mühleder, 

W.Holnthoner, L.Boltzmann, 

Institute for Traumatology, Vienna, 

Austria, R.Liska, TU Wien, Vienna, 

A novel approach for the 

investigation of the material 

parameters by means of 

PFC method 

Muhammad Ajmal Choudhary, 

University of Bayreuth, Bayreuth, 

Germany; Julia Kundin, University 

of Bayreuth, Bayreuth, Germany; 

Martin Oettel, Johannes 

Gutenberg-University, Mainz, 

B2 CoAl: Melting and 

Homogeneity Range 

F. Stein, Max-Planck-Institut für 

Eisenforschung, Düsseldorf, 

Germany 

Interfaces in an amorphous 

FeSc metallic glass 

J. X. Fang, Karlsruhe Institute of 

Technology, Karlsruhe, Germany; U. 

Vainio, HASYLAB at DESY, Hamburg, 

Germany; M. Ghafari, Karlsruhe 

Institute of Technology, Karlsruhe, 

Germany et al. 

Laser cladding, dispersing 

and alloying of ceramic 

surfaces with metal and 

oxide powders 

M. Rohde, I. Südmeyer, H. J. Seifert, 

Karlsruhe Institute of Technology 

(KIT), Institute for Applied Materials 

(IAM-AWP), Karlsruhe, Germany 

11:45 

Special water soluble 

polymers: Universal 

approach to polymers with 

an Upper Critical Solution 

Temp. in water &electrolytes 

Seema Agarwal, Jan Seuring, 

Fangyao Liu 

Philipps-Universität Marburg, 

Department of Chemistry and 

Scientific Center for Materials 

Phase-Field Modeling of 

g´-coarsening Behaviour in 

Ni-Base Superalloys 

J. Kundin (Sp), H. Emmerich, 

University of Bayreuth (Germany) 

Influence of microstructural 

regularity of a directionally 

solidified NiAl-10Mo eutectic 

on creep behavior 

C. Seemüller, M. Heilmaier, 

Karlsruher Institut für Technologie, 

Germany; H. Bei, E.P. George, Oak 

Ridge National Laboratory, Oak 

Ridge, TN, USA 

Enhanced Magnetism in a 

Nanostructured Metallic 

Glass 

R. Witte, Karlsruhe Institute of 

Technology, Karlsruhe, Germany; T. 

Feng, Karlsruhe Institute of 

Technology, Karlsruhe, Germany; 

M. Ghafari, Karlsruhe Institute of 

Technology, Karlsruhe, Germany et 

“In-situ” XPS studies of 

laser induced surface 

nitridation of Ta 

R. Lahoz, Instituto de Ciencia de 

Materiales de Aragón, Zaragoza, 

Spain; J. P. Espinós, Instituto de 

Ciencia de Materiales de Sevilla, 

Sevilla, Spain et al. 

12:00 

Oral Poster - Subsession 

Poster 1: A2-1063 

Poster 2: A2-1019 

Poster 3: A2-337 

Poster 4: A2-1068 

A phase-field study of 

morphology effects in 

heterogeneous nucleation 

Henning Hörstermann, Universität 

Bayreuth, Bayreuth, Germany;Julia 

Kundin, Universität Bayreuth, 

Bayreuth, Germany;Heike Emmerich, 

Universität Bayreuth, Bayreuth, 

Germany; 


Poster 1: B1-976 


Influence of the topological 

state on deformation and 

fracture of Zr-based bulk 

metallic glasses 

M. Stolpe, Saarland University, 

Saarbrücken, Germany; 

J. Kruzic, Oregon State University, 

Corvallis, USA; 

R. Busch, Saarland University, 



Poster 1: C5-906 




22 

*complete list of authors can be found in the browsing version

Tuesday 

am 

Symposium: D3 


Reliability Issues and 

Characterisation in the 

Micro-Nano-Region 

Microreliability I 

Symposium: E1 


Through Process-Modelling 

Through Process-Modelling 1 

Symposium: F2 


Cell-Instructive and Nano 

Biomaterials 

Cell-Material interactions 1 

Symposium: F4 


Bio-Interfaces and Coatings 

Biointerfaces and Coatings I 

Symposium: Y1 

Room: Staatsarchiv 

G.Gottstein Honorary Symp. 

on Characterisation and 

Design of Microstructure for 

Adv. Materials 

Honorary Symposium G. Gottstein 

B. Michel, Fraunhofer ENAS, 

Chemnitz (Germany) 

V. Schulze, Karlsruher Institut für 

Technologie (KIT) (Germany) 

B. Su, University of Bristol (UK) 

T. Keller, 

Friedrich-Schiller-Universität Jena 

(Germany) 

Keynote Lecture Keynote Lecture Keynote Lecture Keynote Lecture 

Investigation of bonding 

stresses in Encapsulated 

MEMS devices 

A.Dommann1, T.Bandi1,2, H. 

Shea2, A.Neels1; 1CSEM SA, Swiss 

Center for Electronics and 

Microtechnology Inc., Neuchâtel; 

2Microsystems for Space 

Technologies Laboratory, EPFL, CH 

Framework for 

Through-Process Simulation 

of Aluminum Sheet Rolling 

T. Brüggemann, V. Mohles, G. 

Gottstein, Institute of Physical 

Metallurgy and Metal Physics, 

RWTH-Aachen University, Germany; 

K.-F. Karhausen, Hydro Aluminium 

Rolled Products GmbH, Bonn, 

Nanopatterned proteins to 

control adherent cells 

D Sutherland, iNANO Center Aarhus 

University, Aarhus, Denmark 

Multilayer functional 

coatings: Thin films and 

microcapsules 

P. Warszynski, J.Haber Institute of 

Catalysis and Surface Chemistry, 

Polish Academy of Sciences, 

Krakow, Poland 

D. Raabe, Max-Planck-Institut für 

Eisenforschung GmbH, Düsseldorf 

(Germany) 

Welcome address - 



Design for Microstructure for 

Advanced Materials 

10:45 


Innovations by Scientific 

Surprises and Long-Term 

Development 

W.A. Kaysser, Helmholtz-Zentrum 


11:00 

Influence of rate-dependent 

material data on the 

reliability of advanced 

packages 

Emad A. Poshtan, Robert Bosch 

GmbH, Automotive Electronics, 

Development ASIC- & Power 

Packages, Reutlingen, Germany et al. 

Phase-field modeling of 

anisotropic elasto-plastic 

mechanical behavior 

D. Schneider, Institute of Materials 

and Processes Karlsruhe University 

of Applied Science, Karlsruhe, 


Intracellular imaging of 

living human glioblastoma 

cells by label-free confocal 

Raman microscopy – 

calculating artificial immuno 

fluorescence images 

Alexander M. Gigler, Center for 

Nanoscience (CeNS) and Section 

Crystallography, LMU-München, 

Munich, Germany and Corporate 

Technology Siemens AG, Munich, 


Controlling cell migration 

via topographical, 

mechanical and chemical 

surface patterns 

G. de Vicente Lucas, TU Berlin; C. 

Strehmel, TU Berlin; Z. Zhang, TU 

Berlin, A. Löbus, TU Berlin, S. 

Kelleher, TU Berlin, M. C. Lensen, TU 

Berlin, Germany. 

11:15 

Reliability Characterization 

by Stress Chip 

Measurements 

F. Schindler-Saefkow1,2,3, F. Rost3 

,A. Otto3,T. Winkler2, S. Rzepka3, 

B. Michel3 

1 AMIC Angewandte 

Micro-Messtechnik GmbH, Berlin; 2 

Berliner Nanotest GmbH; 

Microstructure evolution 

during heat treatment of 

DC04 steel 

Moritz Wenk, Karlsruhe Institute of 


Simone Schendel, Karlsruhe Institute 

of Technology, Karlsruhe, Germany; 

Reiner Mönig, Karlsruhe Institute of 


Nanometer Size Protein 

Patterning using reversal 

Microcontact Printing for the 

Investigation of Protein- 

Protein Intera. in Live Cells 

A.Rank, I. Bergmair, B. Dittert, M. 

Mühlberger,Functional Surfaces and 

Nanostructures, Profactor GmbH, 

Steyr-Gleink, Austria 

S. Sunzenauer, Institute for 

Biophysics, Johannes Kepler 

Towards Biomaterial 

Screening: Continuous 

monitoring of tissue 

responses towards 

biomaterial coatings 

M. Kubon, M. Moschallski, T. 

Ensslen, G. Link, S. Werner, C. 

Burkhardt, H. Hartmann, B. 

Schlosshauer, M. Stelzle, NMI 

Natural and Medical Science Institute 

at the University of Tuebingen, 


On the Interaction of Solute 

Atoms with Grain 

Boundaries 

R. Kirchheim, University of 

Goettingen (Germany) 

11:30 

Fracture toughness 

measurements for interfaces 

in Microelectronic packages 

on samples from 

production 

I. Maus, H. Pape, H. S. Nabi, M. 

Goroll 

Infineon Technologies AG, 

Regensburg, Germany 

Jürgen Keller, AMIC GmbH, Berlin, 

Germany 

Influence of the Morphology 

on the Reactivity: The 

Example of Aluminium 

Nanopowders 

B. André, IM2NP, Marseille, France; 

M.V. Coulet, IM2NP, Marseille, 

France; V. Heresanu, CINaM, 

Marseille, France; J. Rogez, IM2NP, 

Marseille, France; R. Denoyel, 

Madirel, Marseille, France. 

Stimuli-Responsive Coatings 

for the Control of 

Cell-Surface Interactions 

A. Fery, Physical Chemistry II, 


Germany; D. V. Andreeva, Physical 

Chemistry II, University of Bayreuth, 

Bayreuth, Germany et al. 

Combinatory Effect of 

Chemical Functionalization 

and Surface Roughness of 

Titanium on Cells – Which 

Modification is Dominant? 

Henrike Rebl, University of Rostock, 

Biomedical Research Center, Dept. of 

Cell Biology, Rostock, Germany 

Birgit Finke, Leibniz Institute for 

Plasma Science and Technology 

e.V., Greifswald, Germany 

11:45 

Highlight Lecture 

Resistive Sensor Structures 

as Detector for Interface 

Delamination by using the 

3-Omega Method 

R. Mroßko, J. Keller, AMIC GmbH, 

Berlin, Germany; B. Wunderle, D. 

May, Chemnitz University of 

Technology, Chemnitz, Germany et 

al. 

Recrystallization with the 

phase-field method in the 

process chain of cold 

rolling, annealing and deep 

drawing 

A. Vondrous, M. Selzer, P. Bienger, 

S. Schendel, M. Baiker, B. Nestler, D. 

Helm, R. Mönig 


Poster 1: F2-291 




Micro-ion beam quantitative 

chemical mapping: a 

relevant technique for 

studying tissue engineering 

scaffolds 

J. Lacroix, Clermont Université, 

Université Blaise Pascal, 

CNRS/IN2P3, Laboratoire de 

Physique Corpusculaire, 63171 

Aubière, France et al. 

Triple Junction Transport 

and Segregation 

Guido Schmitz, Zoltan Balogh, Reda 

Chellali and Patrick Stender, 

Institut of Materials Physics, Univ. 

of Münster, Germany 

12:00 

*complete list of authors can be found in the browsing version 

23

pm1 

Tuesday 

Symposium: A2 

Symposium: A6 

Symposium: B1 

Symposium: B3 

Symposium: C5 







Modern Aspects in 

Structural Phase 







Laser and Plasma 

Processing Methods 

14:30 

Stimuli Sensitive Polymers 2 

D. Cohn, Hebrew University of 

Jerusalem (Israel) 


Chemical and Physical 

Stimuli in Drug and Gene 

Delivery Applications 

J. Kost, Ben Gurion University at the 

Negev, Beer-Sheva (Israel) 

Thermodynamic aspects of structural 

phase transformations 

H. Emmerich, Universität Bayreuth 

(Germany) 


An original unified 

approach for the description 

of phase tranformations in 

steel during cooling : first 

application to binary Fe-C 

O. Bouaziz, ArcelorMittal Research, 

Maizières les Metz, France 

Mechanical Properties 

M. Oehring, Helmholtz-Zentrum 



Plasticity and Ductility of B2 

Alloys 

V. Paidar, Institute of Physics AS CR, 

Czech Republic 

V. Vitek, University of Pennsylvania, 

USA 

Transport phenomena 




Influence of the 

stress-enhanced water 

diffusion on strength and 

fatigue of silica glass 

S. Wagner, Karlsruhe Institute of 

Technology, Germany; Th. Fett, 

Karlsruhe Institute of Technology, 

Germany; G. Rizzi, Karlsruhe Institute 

of Technology, Germany et al. 

Plasma processing 

A. González-Elipe, Universidad de 

Sevilla (Spain) 

Atmospheric Pressure 

Plasma-Assisted Laser 

Ablation of Glasses 

C. Gerhard, Clausthal University of 

Technology, Clausthal-Zellerfeld, 

Germany; S. Brückner, Clausthal 

University of Technology, 

Clausthal-Zellerfeld, Germany et al. 

14:45 


Application of the cyclic 

transformation concept to 

identify the nature of the 

transf. during the bainite 

formation in lean steels. 

Sybrand van der Zwaag, Delft 

university of technology; Hao Chen, 

Delft university of technology, NL 

Microstructure and mech. 

behaviors of NiAl-Mo 

composites produced by 

specially controlled 

directional solidification 

L. Hu, Institute for Physical 


RWTH Aachen University; 

W. Hu, Institute for Physical 


RWTH Aachen University et al. 

Hydrogen Diffusion and 

Permeation of Glasses 

P. Ried, M. Gaber, R. Müller, M. 

Dittrich und M. Paul, St. Pflaum, J. 

Deubener, Federal Institute for 

Materials Research and Testing, 


Proteins and 

Polysaccharides Processing 

by Electron Beam Plasma 

T. Vasilieva, Moscow Institute of 

Physics and Technology, 

Dolgoprudny, Moscow Region, 

141700, Russia 

15:00 

Microscopic characterization 

of particulate SMP matrices 

C. Wischke, M. Schossig, A. 

Lendlein, Center for Biomaterial 

Development and 

Berlin-Brandenburg Center for 

Regenerative Therapies, 

Helmholtz-Zentrum Geesthacht, 

Scale-Bridging Simulation 

from Atomistic to 

Mesoscopic Length Scales. 

M. Berghoff, M. Selzer, B. Nestler, 

arlsruhe Institute of Technology, 

Germany; R. Rozas, J. Horbach, 

Heinrich-Heine-Universität 

Düsseldorf, Germany 

Efficient optimization of the 

intrinsic mechanical 

properties in intermetallic 

alloys 

M. Zamanzade,Saarland University, 

Saarbrücken, Germany; A. 

Barnoush,Saarland University, 

Saarbrücken, Germany; H. 

Vehoff,Saarland University, 

Saarbrücken, Germany; 

Lithium migration in 

alumosilicate glasses 

A.-M. Welsch, Institut für 

Mineralogie, Leibniz Universität 

Hannover, Hannover, Germany; S. 

Ross, Institut für Mineralogie, 

Leibniz Universität Hannover, 

Hannover, Germany et al. 

Comparison of Atmospheric 

-Pressure Plasma & 

near-infrared Laser radiation 

as methods for surface 

pre-treatment of CFRP 

F. Fischer, S. Kreling, K. Dilger, 


Braunschweig, Institute of joining 

and welding, Braunschweig, 

Germany 

15:15 

Towards micrometer sized 

core-shell actuators from 

liquid crystalline elastomers 

by a continuous flow 

synthesis 

Eva-Kristina Fleischmann (1) 

Hsin-Ling Liang (1) Jan Lagerwall 

(2), Rudolf Zentel (1), 

1) Institute of Organic Chemistry, 

Johannes Gutenberg-Universität 

Mainz, Germany et al. 

The Ostwald step rule and 

martensitic transformation 

E. Gamsjäger, Montanuniversität 

Leoben, Leoben, Austria. 

Microstructure changes 

during creep in L1_2 

hardened Co-Base 

Superalloy 

F. Pyczak, Helmholtz-Zentrum 

Geesthacht, Germany, A. Bauer, 

University Erlangen-Nürnberg, 

Erlangen, Germany, M. Göken, 


Erlangen, Germany 

Atomic mobility inside 

shear bands and the impact 

on tracer diffusion, 

nanocrystal nucleation and 

growth 

G. Wilde, J. Bokeloh, G. Reglitz, H. 

Rösner, S. Divinski, University of 

Münster, Germany 


Atmospheric Pressure 

Plasma devices and 

processings for surface 

treatments 

J. Dutroncy, E. Jouvet, T. Sindzingre 

AcXys Technologies, 148 rue des 

vingt Toises, 38950 St Martin le 

Vinoux FRANCE 

15:30 

Direct Write Thermal Probe 

Patterning of Polymeric Thin 

Films 

Urs Duerig, IBM Research - Zurich, 

Switzerland; Philip Paul, IBM 

Research - Zurich, Switzerland; Felix 

Holzner, IBM Research - Zurich, 

Switzerland, Michel Despont, IBM 

Research - Zurich, Switzerland et al. 

Application of the cyclic 

phase transformation 

concept for determining the 

effective austenite/ferrite 

interface mobility 

Hao Chen,Delft University of 

Technology; Ernst 

Gamsjäger,Leoben Univerisity; 


University of Technology 

Mechanical response of 

D03- and B2-ordered iron 

aluminides at high strain 

rates 

D. Janda, M. Heilmaier, Karlsruhe 

Institute of Technology, Institute for 

Applied Materials, Karlsruhe, 

Germany; M.Hockauf, Chemnitz 

University of Technology, Institute 

of Materials Science and 

High-Temperature Creep 

Behavior of Polymer-Derived 

SiOC Glasses 

E. Ionescu, TU Darmstadt, Darmstadt, 

Germany; H.-J. Kleebe, TU Darmstadt, 

Darmstadt, Germany; 

B. Papendorf, TU Darmstadt, 

Darmstadt, Germany; R. Günzler, TU 

Darmstadt, Darmstadt, Germany et al. 

15:45 


Shape Memory Effects on 

the Micro and Nano Scale 

W. Huang, Nanyang Technological 

University (Singapore) 

Amorphous and crystalline 

nanoparticles of silicon 

nitride in ferrite; role of 

interfacial energy and elastic 

anisotropy upon phase 

transformation 

S. Meka, Max Planck Institute for 

Intelligent Systems (formerly Max 

Planck Institute for Metals Research), 

Stuttgart, Germany et al. 












Poster 3: C5-1089 

24 


Tuesday 

pm1 

Symposium: D3 





Microreliability II 

Symposium: E1 



Through Process-Modelling 2 

Symposium: F2 



Biomaterials 

Cell-material interactions 2 

Symposium: F4 



Biointerfaces and Coatings II 

Symposium: Y1 







A. Dommann, CSEM, Neuchatel 

(Switzerland) 


Accelerated mechanical 

testing as an alternative 

method for reliability 

assessment of electronic 

devices 

G. Khatibi, University of Vienna, 

Austria; B. Weiss, University of 

Vienna, Austria 

Determination of 

environmental dependent 

properties of microelectonic 

relevant materials on 

miniaturized specimens 

H.Walter, O.Hölck, T. Nowak, O. 

Wittler, Fraunhofer IZM, Berlin, Dept. 

Environmental and Reliability 

Engineering (ERE), Germany 

B. Nestler, Hochschule Karlsruhe - 

Technik und Wirtschaft (Germany) 


Industrial View on the 

Modelling of Precipitations 

in Multiphase Steels 

K. Khlopkov, ThyssenKrupp Steel 

Europe AG, Duisburg, Germany; 

Th. Pretorius, ThyssenKrupp Steel 


Th. Heller, ThyssenKrupp Steel 


Simulation of the two-step 

cup drawing process based 

on a mean field approach 

V. Glavas, Karlsruhe Institute of 

Technology (KIT), Karlsruhe, 

Germany; 

T. Böhlke, Karlsruhe Institute of 


Germany; 

C. Selhuber-Unkel, 

Christian-Albrechts-Universität zu 

Kiel (Germany) 

K. Rezwan, Universität Bremen 

(Germany) 

L. Shvindlerman, RWTH Aachen 

(Germany) 

Keynote Lecture Highlight Lecture Keynote Lecture 

Spatial and temporal 

coordinated processes of 

cells and cell assemblies 

Joachim P. Spatz, MPI for Intelligent 

Systems, Stuttgart 

Design and Characterization 

of Artificial Extracellular 

Matrices (aECM) With 

Defined Growth Factor 

Interaction Properties 

D. Scharnweber1, H. Worch1, S. 

Möller2, M. Schnabelrauch2, V. 

Hintze1 

1Technical University of Dresden, 

Institute of Material Science, Max 

A new standard testing 

device for biofilm cultivation 

and characterization, 

suitable for the investigation 

of antimicrobial surface 

properties of biomaterials 

C. Lüdecke 1,2,3; M. Roth 2,3; J. 

Bossert 1,3 et al. 

The Advent and Recent 

Progress in Grain Boundary 

Engineering 

T. Watanabe, Tohoku University, 

Sendai (Japan) 

14:30 

14:45 

Conductive Nanocrystalline 

Diamond for Piezoresistive 

Sensor Applications 

N. Wiora,Ulm 

University,Ulm,Germany; M. 

Mohr,Ulm University,Ulm,Germany; 

K. Brühne,Ulm 

University,Ulm,Germany; P. 

Gluche,GFD Gesellschaft für 

FE-simulation of machining 

induced phase 

transformations considering 

friction as a function of 

temperature and sliding 

speed and detailed 

V. Schulze, Karlsruhe Institute of 

Technology (KIT), wbk Institute of 

Production Science, Karlsruhe, 

Germany; 

J. Michna, Karlsruhe Institute of 

Technology (KIT), wbk Institute of 


Mechanically Tunable 

Biocompatible Hydrogels as 

Extracellular Matrix Mimic 

F. Rehfeldt, Georg August University 

Göttingen (Germany) 

Effect of Fatty Acid Coated 

Titanium on Viability of 

Staphylococcus Epidermidis 

and Membrane-Surface 

Interactions and 

Mineralization of MC3T3-E1 

C. Petzold, University of Oslo, Oslo, 

Norway, M. Gomez-Florit, University 

of Balearic Islands, Palma de 

Mallorca, Spain, S. P. Lyngstadaas, 

University of Oslo, Oslo, Norway, 

Marta Monjo, University of Balearic 

Grain Boundary Engineering 

for Improvement of 

High-Cycle Fatigue Strength 

in FCC Materials with 

Different Stacking Fault 

Energies 

S. Kobayashi, Ashikaga Institute of 

Technology, Ashikaga, Japan; S. 

Tsurekawa, Kumamoto University, 

Kumamoto, Japan; T. Watanabe, 

Formerly Tohoku University, 

Sendai, Japan 

15:00 

Residual Stress Analysis of 

Thin Diamond Films by the 

Combination of Focused Ion 

Beam Milling, Digital Image 

Correlation, Micro-Raman 

Spectroscopy and Finite 

F. Ahmed, Institute of General 

Materials Properties, Department of 

Materials Science and Engineering, 

University of Erlangen-Nuremberg, 

Erlangen, Germany et al. 

Modeling of Coupled 

Physical Phenomena 

During Sintering of a 

Contact Material Silver 

Based 

K. Pallez, LIMatB, Université de 

Bretagne Sud, Lorient, France; E. 

Brisson, LIMatB, Université de 

Bretagne Sud, Lorient, France; P. 

Rogeon, LIMatB, Université de 

Bretagne Sud, Lorient, France et al. 

Contact Formation between 

pathogenic Amoebae and 

Functionalized Surfaces 

J. Reverey, S.Viebig, M. Leippe, C. 

Selhuber-Unkel, 

Christian-Albrechts-University, Kiel, 

Germany 

Sodium and Calcium 

Alginate-Povidone Iodine 

Biomaterials for 

Antimicrobial Wound 

Dressings and Surgical 

Sutures 

I. Liakos, L. Rizzello, C. La Tegola, I. 

S. Bayer, P. P. Pompa, Center for 

Biomolecular Nanotechnologies, 

Istituto Italiano di Tecnologia 

@UniLe, via Barsanti, 73010 

Arnesano, Lecce, Italy. 

Grain Boundaries: 

Pseudopartial Wetting 

B.B. Straumal(1,2), X. Sauvage(3), 

A.A. Mazilkin(1,2), I. 

Konyashin(4), B. Baretzky(2), R.Z. 

Valiev(5) 

(1)Institute of Solid State Physics, 

Russian Academy of Sciences, 

15:15 

Comparative analysis of the 

results of accelerated 

reliability testing of solder 

joints conducted at various 

centers 

P.MATKOWSKI Wroclaw University 

of Technology, Poland 

R. DUDEK Fraunhofer ENAS Micro 

Materials Center, Germany 

Monte Carlo Simulation of 

X-Ray Scattering and 

Diffraction at packaged 

3D-Microsystems 

U. Zschenderlein, Chemnitz 

University of Technology, Chair 

Materials and Reliability of 

Microsystems, Chemnitz, Germany 

et al. 

3D-finite element simulation 

of simultaneous dualfrequency 

induc. hardening 

for prediction of microstructure 

a. residual stresses 

B. Kaufmann, Karlsruhe Institute of 


H. Autenrieth, Robert Bosch GmbH, 

Stuttgart, Germany; 

M. Schwenk, Karlsruhe Institute of 


Through Process Texture 

Simulation of Ni-5at.%W for 

Coated Conductor 

Applications 

M. Witte (Sp), L. Barrales Mora, G. 

Gottstein, RWTH Aachen University 

(Germany) 

Towards the understanding 

of bond organization in 

adhesion domains: 

Coexistence of the dilute and 

the dense packing 

D. Schmidt, Universität Stuttgart, 

Germany; T. Bihr, Universität 

Stuttgart, Stuttgart, Germany; U. 

Seifert, Universität Stuttgart, 

Stuttgart, Germany; A.-S. Smith, 

Universität Erlangen-Nürnberg 




Poster 3: F2-1098 


Metal Ion Release Hybrids 

for Tailoring of Bioadhesion, 

Antibacterial and 

Biocompatibility Properties 

of Polymers in Medical 

Applications 

M. Gladitz, J. Bauer, P. Brückner and 

S. Reinemann, Thuringian Institute 

of Textile and Plastics Research, 

Rudolstadt, Germany 

Bacterial ability to sense 

chemical heterogeneities 

studied on well controlled 

platforms dedicated to 

biointerface study 

Judith Böhmler, Arnaud Ponche, 

Karine Anselme, Lydie Ploux, CNRS, 

Mulhouse, France 

Enhancement of the local 

magnetic moments at grain 

boundaries in ferromagnetic 

metals 

S. Tsurekawa, Kumamoto 

University, Kumamoto, Japan; K. 

Hirayama, Kumamoto University, 

Kumamoto, Japan; S. Ii, National 

Institute for Materials Science, 

Tsukuba, Japan 

Atom-by-Atom Observation 

of Grain Boundary 

Migration in Graphene 

Simon Kurasch, Carl E. Krill III and 

Ute Kaiser, Ulm University, Ulm, 

Germany; Jani Kotakoski, Ossi 

Lehtinen and Arkady V. 

Krasheninnikov, University of 

Helsinki, Helsinki, Finland 

15:30 

15:45 


25

pm2 

Tuesday 

Symposium: G1 

Symposium: A5 

Symposium: B1 

Symposium: B3 

Symposium: B7 






Materials Engineering in 

Australia 

Electrical Fatigue of 







Bulk Ultrafine- and 

Nanostructured Materials 


Lithium Ion Batteries 

Titanium Aluminides 

Optical Properties & Applications 

ARB and ECAP 

16:30 

16:45 

K.-D. Liss, Australian Nuclear Science 

and Technology Organisation, Lucas 

Heights / Sydney (Australia) 


Steps towards underst. 

methanol synthesis- 

Comparative in situ neutron 

diffraction studies under ind. 

working conditions 

T. Kandemir, F. Girgsdies, R. 

Schlögl, M. Behrens, 

Fritz-Haber-Institut der MPG, Berlin, 

Germany; T. Hansen, Institut 

Laue-Langevin, Grenoble, France; 

K.-D. Liss, ANSTO, Lucas Heights, 

Mechanically stable 

topological interlocked 

porous ceramic-based 

structures with enhanced 

sound absorption properties 

M. Carlesso, R. Giacomelli, S. Kroll, 

K. Rezwan, Advanced Ceramics - 

University of Bremen, Bremen, 

Germany; A. Molotnikov, Y. Estrin, 

Department of Materials Engineering 

- Monash University, Melbourne, 

W. Jaegermann, Technische 

Universität Darmstadt (Germany) 


All-solid-state 

micro-batteries: a 

challenging route towards 

3D-integration 

P.H.L. Notten, Eindhoven University 

of Technology (Netherlands) 

J.D. Paul, Helmholtz-Zentrum 


Effect of Microstructure on 

the Creep Behaviour of 

Beta-solidifying Nb 

containing Gamma- 

Titanium Aluminide Alloys 

J. Paul, Helmholtz-Zentrum 

Geesthacht, Institute of Materials 

Research, Geesthacht, Germany; 


Geesthacht, Institute of Materials 

Research, Geesthacht, Germany et al. 

Crystallographic 

Modulation: A Novel 

Approach to Address the 

Ductility Problem of TiAl 

Alloys 


Geesthacht, Germany; J.D.H. Paul, 


Germany; M. Oehring, 


Germany; 




Advanced in-line 

surface-engineering of glass 

substrates for clean energy 

conversion and 

conservation 

E. Hultstein, Linde AG, 

Unterschleissheim, Germany; 

K. Nielsen, FAU Erlangen, Erlangen, 

Germany; 

A. Mader, Lisec Group, Hausmening, 

Austria 

Er:YAG Transparent 

Ceramics for Laser 

Applications : 

Co-Precipitation Synthesis 

and Spark Plasma Sintering 

C. Marlot (Sp), E. Barraud, 

French-German research institute of 

Saint-Louis (France); S. Le Gallet, 

CNRS-Université de Bourgogne, 

Dijon (France); M. Eichhorn, 

French-German research institute of 

M.F.-X. Wagner, Technische 

Universität Chemnitz (Germany) 

3D-architecturing of 

aluminium sheets by ARB 

processing with graded 

copper particle 

reinforcement 

C.W. Schmidt, Institute I: General 

Materials Properties, 


Erlangen-Nürnberg, Erlangen, 


Accumulative roll bonding 

and differential speed rolling 

of Al-Ti composites 

J. Romberg, IFW-Dresden, Dresden, 

Germany; J. Freudenberger, 

IFW-Dresden, Dresden, Germany; J. 

Scharnweber, TU Dresden, Dresden, 

Germany; T. Marr, IFW-Dresden, 

Dresden, Germany; I. Okulov, 

17:00 

Neutron Scattering Studies of 

Functional Materials with 

Triple-axis Spectrometer 

TAIPAN 

S.A. Danilkin, Bragg Institute, 

Australian Nuclear Science and 

Technology Organization, New 

Illawarra Road, Lucas Heights, NSW 

2234, Australia et al. 

Influence of Surface 

Properties on Phase Stability 

and Diffusion Kinetics in 

Nanoparticulate Lithium 

Based Cathode Materials 

P. M. Diehm, Technische Universität 


K. Albe, Technische Universität 


Microstructural evolutions in 

powder metallurgical TiAl 

sheet materials 

Yong Liu, Xiaopeng Liang, 

Huizhong Li, Lan Huang, Wei Zhang, 

Baiyun Huang; 

State Key Laboratory of Powder 

Metallurgy, Central South 

University, Changsha 410083, 

Novel melts-spun optical 

fibers for lighting 

applications 

M. Beckers, W. Steinmann, N. 

Vestweber, G. Seide, T. Gries Institut 

für Textiltechnik (ITA) der RWTH 

Aachen University, Aachen, Germany 


Microstructure and 

Mechanical Properties of 

Accumulative Roll Bonded 

AA6014/AA5754 

Laminates 

Tina Hausöl, Heinz Werner Höppel, 

Mathias Göken, University 

Erlangen-Nuremberg, Germany 

17:15 

1D mesoporous TiO2 

nanofibers for dye-sensitized 

solar cell applications 

F.H. Bijarbooneh, Y. Zhao, and J.H. 

Kim, Institute for Superconducting 

and Electronic Materials, University 

of Wollongong, Squires Way, North 

Wollongong, New South Wales 

2500, Australia 

Composite Materials Based 

on Polymer-Derived-SiCN 

Ceramic and Disordered 

Hard Carbons as Anodes 

for Lithium-Ion Batteries 

Monika Wilamowska, Institut für 

Materialwissenschaft,Technische 

Universität Darmstadt; 

Magdalena Graczyk-Zając, 

Institut für 

Materialwissenschaft,Technische 

On the Bauschinger Effect in 

TiAl Alloys 

J.D.H. Paul,Helmholtz-Zentrum 

Geesthacht, Geesthacht, Germany; U. 

Lorenz,Helmholtz-Zentrum 

Geesthacht, Geesthacht, Germany; F. 

Appel, Helmholtz-Zentrum 


Development of Optically 

Active Germanate Glasses 

for Photonic Crystal fibres 

A.Winterstein 1, S. Krolikowski 1, 

S. Manning 2, H. 

Ebendorff-Heidepriem 2, L. 

Wondraczek 1 

1 University Erlangen-Nuremberg, 

Department Material Science, Chair 

Influence of industrial scale 

accumulative roll bonding 

on the homogeneity and 

mechanical properties of 

AA1050A 

M. Ruppert, Institute I: General 

Materials Properties, 




17:30 


Atom Probe Tomography 

Characterisation of Solute 

Clustering in AA6111 

R.K.W. Marceau, Max-Planck-Institut 

für Eisenforschung, Düsseldorf, 

Germany; 

G. Sha, Australian Centre for 

Microscopy & Microanalysis, The 

University of Sydney, Australia et al. 


Electrochemical Strain 

Microscopy: A biased view 

on lithium ion batteries 

N. Balke, Oak Ridge National 

Laboratory, Oak Ridge, TN, USA 

Modelling of Primary 

Damage in Ti-Al 

Intermetallic Compounds 

Exposed to Fast Particle 

Irradiation 

Roman Voskoboinikov, Institute of 

Materials Engineering, ANSTO, 

Sydney, Australia 





Multi-temperature equal 

channel angular pressing of 

Mg-3wt%Al-1wt%Zn alloy 

Peter Molnár, Institute of Physics of 

the ASCR, Prague, Czech Republic; 

Alex Jäger, Institute of Physics of 


Pavel Lejcek, Institute of Physics of 


17:45 

Ultrathin Nano-Composite 

Films From Transition Metal 

Alloys On Polymeric 

Substrates For Real World 

Applications 

Drew Evans, Mawson Institute, 

University of South Australia, 

Mawson Lakes, Australia; Kamil 

Zuber, Mawson Institute, University 

of South Australia, Mawson Lakes, 

Australia et al. 






Combining extrusion and 

ECAP – an efficient 

processing route for large 

scale UFG materials 

P. Frint, Chemnitz University of 

Technology, Chemnitz, Germany; 

M. Hockauf, Chemnitz University of 


T. Halle, Chemnitz University of 


26 


Tuesday 

pm2 

Symposium: C1 


Nanomaterials and 

Composites 

Metals/Ceramics 

Symposium: C7 


Processing of Nanomaterials 


Symposium: F2 



Biomaterials 

Nano-biomaterials 

Symposium: F4 



Biointerfaces and Coatings III 

Symposium: Y1 







R. Gadow, Universität Stuttgart 

(Germany) 

S. Mathur, Universität zu Köln 

(Germany) 

B. Garipcan, Bogaziçi University, 

Istanbul (Turkey) 

R. Krastev, Universität Tübingen, 

Reutlingen (Germany) 

Y. Estrin, Monash University, 

Melbourne (Australia) 

Polymer-Derived SiHfCN and 

SiHfBCN Ceramic 

Nanocomposites – 

Synthesis and 

High-Temperature Behavior 

E. Ionescu, TU Darmstadt, Darmstadt, 

Germany; 

H.-J. Kleebe, TU Darmstadt, 


S. Hapis,TU Darmstadt, Darmstadt, 

Germany; 

Electric Conductivity in 

Polymeric Fibers by the 

Incorporation of Carbon 

Nanotubes 

W. Steinmann (Sp), J. Wulfhorst, G. 

Seide, T. Gries, RWTH Aachen 

University (Germany) 


Semi-conductor Nanowires 

in Biology: from 

Applications to 

Nanotoxicology 

Christelle N. Prinz, Lund University, 

Sweden 

Photo-induced switchable 

TiO2 thin films for biological 

application 

O. Berger,Institute of Materials 

Science, TU Dresden, D-01062 

Dresden, Germany; W.-J. 

Fischer,Institute of Semiconductors 

and Microsystems, TU Dresden, 

D-01062 Dresden, Germany 


1D Structural Elements and 

Stability of Nanocrystalline 


L.S. Shvindlerman, Russian 

Academy of Sciences, 

Chernogolovka, Moscow Distr., 

Russia, G.Gottstein, RWTH Aachen 


16:30 

Mechanical properties of 

yttria stabilized zirconia – 

silicon carbide 

nanocomposites 

F. Kern, IFKB - University of 

Stuttgart, Germany 

R. Gadow, IFKB - University of 

Stuttgart, Germany 

Growth and characterization 

of Cu nanowires for 

interconnects 

Trilok Singh, I. Giebelhaus and S. 

Mathur * 

Institute of Inorganic and Materials 

Chemistry, University of Cologne, 

Cologne, D-50939, Germany 

Protein Assembly on 

Surfaces of Thermally Etched 

Titania 

Thomas F. Keller, Chair in Materials 

Science, Institute of Materials 

Science and Technology, 

Friedrich-Schiller-University Jena, 


16:45 

Fabrication and 

Optimization of 

ZrO2-ZrSiO4/NiCr 

functionally graded 

materials 

Kangjian Wu, Sven Scheler, Ho-Seon 

Park, Monika Willert-Porada 

University of Bayreuth, 95447 


Simple and large scale 

fabrication of ZnO 

nano-micro structures for 

multifunctional applications 

Y. K. Mishra , S. Kaps, A. 

Schuchardt, I. Paulowicz, X. Jin, M. 

Den , D. Gedamu, S. Wille and R. 

Adelung, 

Micro/nano-patterning of 

titanium surfaces in 2D and 

3D 

T. Sjöström and B. Su, University of 

Bristol, UK 

L. McNamara and M. Dalby, 

University of Glasgow, UK 

Tailored surface 

functionalization of colloidal 

alumina: effect on 

protein-particle conjugation 

F. Meder, University of Bremen, 

Germany; T. Daberkow, University 

of Bremen, Germany; L. Treccani, 

University of Bremen, Germany; K. 

Rezwan, University of Bremen, 

Germany 

Grain Boundary Sliding and 

Thermally Activated 

Dislocation Processes in 

Nanomaterials 

Mathias Göken, Heinz-Werner 

Höppel, Department of Materials 

Science and Engineering, Institute I, 


Germany 

17:00 

Partially Stabilized Zirconia 

with different metal 

reinforcements 

Dipl.-Ing Peter Franke, Institute for 

Materials Science, Dresden University 

of Technology, Dresden, Germany 

Prof. Dr.-Ing. Bernd Kieback, 


Dresden University of Technology, 

New Ideas on the 

Fabrication of Ti3SiC2-Based 


P. Istomin, A. Nadutkin, V. Grass 

(Sp), Russian Academy of Sciences, 

Syktyvkar (Russian Federation) 

Stabilisation of Metal Oxide 

Nanoparticles by Binding of 

Short-Molecule Ligands 

S. Zellmer, Technische Universität 

Braunschweig, Braunschweig, 

Germany; G. Garnweitner, 



Germany 

Application of 3-D 

electrospun nano fiber 

cylinders for tissue 

engineering 

Sanjay Mathur,Institute of Inorganic 


Cologne, Germany; 

Karim Arroub, Institute of Inorganic 


Cologne, Germany et al. 

Targeted drug delivery with 

carbon nanotubes: Single 

particle studies of selective 

carbon nanotube binding 

and uptake by human 

carcinoma cells 

C. Lamprecht, 

Christian-Albrechts-Universitaet, Kiel, 

Germany; B. Unterauer, J. Kepler 

University, Linz, Austria; B. 

Plochberger, TU Wien, Wien, Austria; 

V. Ruprecht, Institute of Science and 

Increased virostatic potential 

and cell viability with ZnO 

micro-nanoparticles after 

UV-treatment 

Yogendra Kumar Mishra a, Rainer 

Adelung a, Claudia Röhl b, Deepak 

Shukla c,d, Frank Spors e, Vaibhav 

Tiwari f, 

a Institute of Materials Science, 

University of Kiel, Kiel 24143, 


Design of 3D sponge 

networks for active surface 

construction 

E.V. Skorb, Max Planck Institute of 

Colloids and Interfaces, Potsdam, 

Germany; D.V. Andreeva, Physical 

Chemistry II, University of Bayreuth, 

Germany; H. Möhwald, Max Planck 

Institute of Colloids and Interfaces, 

Failure mechanisms of 

DLC-coated articulating 

implants 

U. Müller, Empa, Swiss Federal 

Laboratories for Materials Testing 

and Research, CH-8600 Dübendorf, 

Switzerland 

R. Hauert, Empa, Swiss Federal 

Laboratories for Materials Testing 

Strain mapping of a triple 

junction in nanocrystalline 

Pd 

G. Wilde, S. Divinski, M. 

Peterlechner, H. Rösner, University of 

Münster, Germany; C. Kübel, 


Eggenstein-Leopoldshafen, Germany 

Grain Growth Behavior with 

a Roughening Transition of 

Faceted Boundaries in 

Sintered Ultra-Fine Nickel 

Suk-Joong L. Kang, Korea Advanced 

Institute of Science and Technology, 

Daejeon, Korea; Sang-Hyun Jung, 

Korea Advanced Institute of Science 

and Technology, Daejeon, Korea et 

al. 

17:15 

17:30 

Rod-Like Particle Addition 

Effects on Freeze-Cast 

Porous Silica Composites 

K. Lu, Virginia Tech, Blacksburg, VA, 

USA; W. Li, Virginia Tech, 

Blacksburg, VA, USA; J. Y. Walz, 

Virginia Tech, Blacksburg, VA, USA. 

Uniaxially Aligned 

Electrospun PAN/MWCNT 

composite on ZigZag 

Shaped Collector 

A. Saberi, Chair of Materials 

Processing, University of Bayreuth, 

95440 Bayreuth, Germany; Z. 

Negahdari, Chair of Materials 

Processing, University of Bayreuth, 

95440 Bayreuth, Germany et al. 






Fluorescently labeled metal 

oxide colloidal particles for 

nanotoxicological in vitro 

screening 

Laura Treccani, Timo Daberkow, 

Shakiba Shahabi, Fabian Meder, 

Kurosch Rezwan, Advanced 

Ceramics, University of Bremen 

(Germany) 

17:45 


27

am 

Wednesday 

Symposium: A5 




Symposium: A7 


Advanced Materials for 


Symposium: B4 


Mechanical Properties and 


Symposium: B7 




Symposium: C1 

Room: A03 - Basement 


Composites 

09:15 

09:30 

Ferroelectrics 


Darmstadt (Germany) 


Fatigue Behavior in Pb-free 

Piezoelectric Materials 

D. Cann, Oregon State University, 

Corvallis, Oregon, USA 

Electrode Materials I 

H.J. Seifert, Karlsruher Institut für 

Technologie (KIT), 

Eggenstein-Leopoldshafen 

Characterization (Germany) of LiMPO4 

(M = Fe, Co, Mn) – carbon 

composites as cathode 

materials for Li-ion batteries 

prepared by sol-gel process 

L. Dimesso (Sp), C. Spanheimer, T. 

T. D. Nguyen, R. Hausbrand, 

Technische Universitaet Darmstadt, 

Germany, Y. Zhang, A. L. Yarin, 

University of Illinois at Chicago, 

USA W. Jaegermann, TU Darmstadt 

Novel phase and tailored 

morphology of LiCoPO4 

C. Neef, Kirchhoff Institute for 

Physics, University of Heidelberg, 

Germany; C. Jähne, Kirchhoff 

Institute for Physics, University of 

Heidelberg, Germany et al. 

Ferrous Alloys 

E. Kerscher, Technische Universität 

Kaiserslautern (Germany) 

Influence of Chemical 

Composition, Heat Treatm. 

Parameter and Microstr. on 

Mechanical-Technological 

Properties of Austempered 

Ductile Iron 

C. J. Heckmann, Institut für 

Gießereitechnik, Düsseldorf, 

Germany; U. Petzschmann, Institut 

für Gießereitechnik, Düsseldorf, 

Germany; A. Sobota, Institut für 

Gießereitechnik, Düsseldorf, 

Properties and structure of 

low-carbon steel treated by 

combination of SPD and 

conventional deformation 

E. Pashinska, V. Varyukhin, A. 

Zavdoveev, O.O.Galkin Donetsk 

Institute for Physics and 

Technology National Academy of 

Sciences of Ukraine, Donetsk, 

Ukraine et al. 

Fatigue, toughness and mechanical 

properties 

P. Frint, Technische Universität 



Fatigue mechanisms of 

bimodal NC and UFG Nickel 

Tao Qian, Michael Marx, Horst 

Vehoff, Saarland University, 


Fatigue behaviour of 

ultrafine-grained AA6082 

with an anodic oxide 

coating 

L. Köhler, K. Hockauf, M. Händel, T. 

Halle, D. Nickel, T. Lampke 

all from: Chemnitz University of 

Technology, Institute of Materials 

Science and Engineering, Chemnitz, 

Germany 

Nanohybrids 

K.-H. Haas, Fraunhofer Institut für 

Silicatforschung, Würzburg 

(Germany) 


Enhanced Field Emission 

Properties for Medical X-ray 

Applications with Carbon 

Nanotubes and Graphene 

Composites 

D. Leberl, Siemens AG, Corporate 

Technology, Erlangen, Germany, 

Universitaet Erlangen-Nuernberg, 

Erlangen, Germany; 

S.F. Tedde, Siemens AG, Corporate 

Technology, Erlangen, Germany; 

09:45 

Universal Switching 

Behaviour of Disordered 

Ferroelctrics in Virgin and 

Fatigue States 

S. Zhukov, Y.A. Genenko, S.V. 

Yampolskii, J. Schütrumpf, E. 

Sapper, R. Dittmer, W. Jo : Institut 

für Materialwissenschaft, TU 

Darmstadt, Petersenstr. 32, 64287 


Combinatorial Fabrication 

and Characterization of 

LiMnxCoyNizOr Thin Film 

Electrode Materials for 

Lithium-Ion Batteries 

S.Borhani-Haghighi1, S. Klink2, F. 

La Mantia2, M. Kieschnick1- 3, W. 

Schuhmann2, A. Ludwig1 

1. Institute for Materials, Faculty of 

Mechanical Engineering, 

Ruhr-University Bochum, 44801 

Effect of cold rolling on 

microstructure and tensile 

properties of high-Mn steel 

with TWIP effect 

P.S. Kusakin, Belgorod State 

University, Belgorod, Russia; M.S. 

Tikhonova, Belgorod State 

University, Belgorod, Russia; R.O. 

Kaibyshev, Belgorod State 

University, Belgorod, Russia. 

Fatigue crack growth in 

ultrafine-grained copper 

obtained by ECAP 

M. Arzaghi, G. Hénaff, C. Gardin, C. 

Sarrazin-Baudoux and J. Petit 

Pprime Institute, ISAE-ENSMA 

Futuroscope-Chasseneuil, France 


Novel Insights into 

Photoinduced Sol-Gel 

Polymerization: from Hybrid 

to Nanostructured Films 

D. De Paz, A. Chemtob, C. 

Croutxé-Barghorn, S. Rigole, 

University of Haute Alsace, 

Mulhouse (France) 

10:00 

Pinning of ferroelectric 

domain walls in BiFeO3 

ceramics and its influence 

on the polarization and 

strain response 

T.Rojac1,2, , M. Kosec1,2, J. L. 

Jones3, N. Setter4, D. Damjanovic4 

1 Jozef Stefan Institute, Ljubljana, 

Slovenia; 2 Centre of Excellence 

NAMASTE, Ljubljana, Slovenia; 3 

University of Florida, Florida, USA et 

Phase Stabilities and 

Equilibria in the 

Lithium–Manganese–Oxyge 

n System 

D.M. Cupid, Karlsruhe Institute of 

Technology, Institute for Applied 

Materials - Applied Materials 

Physics, Eggenstein-Leopoldshafen, 


Mechanical behaviour and 

microstructural evolution of 

a with 10 vol.% Mg-PSZ 

reinforced TRIP-matrixcomposite 

at a high strain 

rate and varying temp. 

S. Decker, TU Bergakademie Freiberg, 

Freiberg, Deutschland; S. Wolf, TU 

Bergakademie Freiberg, Freiberg, 

Deutschland; T. Pezold, TU 


Deutschland et al. 

Cryogenic forming of 

AA7075 

S. Fritsch, Chemnitz University of 

Technology, Chemnitz, Germany; , 

S. Hunger, Chemnitz University of 


M. Scholze, Chemnitz University of 


An investigation on different 

gases sensing properties of 

titanium oxide nanotube 

arrays 

Shahin Khameneh Asl, Babak Alavi, 

Department of Materials Engineering, 

Faculty of Mechanical Engineering, 

University of Tabriz, P.O. Code 

51666-14766, Tabriz, IRAN 

10:15 

Reliability Aspects of 

Piezoelectric Thick Film 

Based Energy Harvesters 

L. M. Borregaard, Meggitt Sensing 

Systems, Kvistgaard Denmark; K. 

Astafiev, Meggitt Sensing Systems, 

Kvistgaard Denmark; M. Guizzetti, 

Meggitt Sensing Systems, 

Kvistgaard Denmark et al. 

Iron oxide/carbon 

nanocomposite doped by 

manganese for Lithium-ion 

battery electrode 

O. Gerber,Institut franco-allemand de 

recherches de Saint-Louis, France, 

Saint-Louis; E. Barraud, Institut 

franco-allemand de recherches de 

Saint-Louis, France, Saint-Louis et al. 

Mechanical testing of PM 

cold work steels densified by 

Electro Discharge Sintering 

P. Schütte, Ruhr Universtität 

Bochum, Germany; 

H. Moll, Ruhr Universtität Bochum, 

Germany; 

W. Theisen, Ruhr Universtität 


Effect of grain shape on 

toughness and ductility in 

metals processed by Severe 

Plastic Deformation 

O. Renk, A. Hohenwarter, G. B. 

Rathmayer, R. Pippan, Erich Schmid 

Institut für Materialwissenschaft, 

Leoben, Austria 

Thermal Stability and band 

gap of Zn(NCN) 

K. Morita, Technische Universität 

Darmstadt, Darmstadt, Germany; G. 

Mera, Technische Universität 

Darmstadt, Darmstadt, Germany; H.-J. 

Kleebe, Technische Universität 


10:30 


Influence of Bipolar Electric 

Cycling on the Macroscopic 

and Structural Properties of 

BNT-Based Lead-free 

Piezoceramics 

Julia Glaum, School of Materials 

Science and Engineering, University 

of New South Wales, Australia 

Hugh Simons, School of Materials 

Science and Engineering, University 

of New South Wales, Australia 

Thermodynamic Description 

of the Li-Cu-O system for 

conversion type electrode 

materials for lithium ion 

batteries 

M. Lepple, Karlsruhe Institute of 

Technology, Institute of Applied 


Physics, Eggenstein-Leopoldshafen, 


Study of the Hot Forming of 

a Ferritic ODS Stainless Steel 

for Nuclear Application 

Karch A. , Sornin D.,CEA, France 




Graphene for Composites 

with High Electrical and 

Thermal Conductivity 

M. Grundler, Zentrum für 

BrennstoffzellenTechnik GmbH, 

Duisburg, Germany 

28 


Symposium: D1 


New Techniques in 



New Techniques in Microstructure 

Characterisation 1 

C. Hébert, Ecole Polytechnique 

Fédérale de Lausanne (Switzerland) 

In-situ ACOM-TEM for direct 

imaging of deformation 

processes of nanocrystalline 

metals by straining inside 

the TEM 

A. Kobler, Institute of 

Nanotechnology (INT/KIT), 

Eggenstein-Leopoldshafen, Germany; 

C. Kübel, Institute of 

Nanotechnology (INT/KIT), 

Eggenstein-L eopoldshafen, Germany 

Symposium: C4 


Coatings and Thin Films 

Wear protection and friction 

reduction I 

J. Vetter, Sulzer Metaplas, Bergisch 

Gladbach (Germany) 

Microstructure Formation in 

TiAlN / AlTiRuN Multilayers 

Grown by Cathodic Arc 

Evaporation 

Ch. Wuestefeld, Institute of Materials 

Science, TU Bergakademie Freiberg, 

Freiberg, Germany; 

D. Rafaja, Institute of Materials 


Freiberg, Germany et al. 

Symposium: E2 


Computational 

Thermodynamics and 

Kinetics 

CALPHAD thermodynamics 

H.J. Seifert, Karlsruher Institut für 

Technologie (KIT), 


(Germany) 

Thermodynamic 

Assessment and 

Experimental Investigation of 

the Ternary Ti-Al-Cr System 

M.J. Kriegel, Institute of Materials 

Science, Technical University of 

Freiberg, Freiberg, Germany; D.M. 

Cupid, Institute for Applied Materials 

(IAM-AWP), Karlsruhe Institute of 


Symposium: F1 


Biomaterials Applications 

Tissue engineering and regenerative 

medicine 

A.R. Boccaccini, 



Modulation of cellular 

functions by artificial 

extracellular matrices as 

biomaterial coatings 

S. Franz, U. Anderegg, Leipzig 

University, Germany; U. Hempel, D. 

Scharnweber, H. Worch, University 

of Technology Dresden, Germany; 

M. Schnabelrauch, INNOVENT e.V. 

Jena, Germany; J. C. Simon, Leipzig 

Wednesday 

Symposium: Y1 







T. Watanabe, Tohoku University, 

Sendai (Japan) 


Application of the 

Generalized Schmid Law in 

Multi-Scale Models: 

Opportunities and 

Limitations 

P. Van Houtte, Departement MTM, 

KU Leuven, Leuven, Belgium 

am 

09:15 

Multivariate Statistical 

Analysis of 3D EDX/FIB 

spectral images applied to 

the microstructure 

characterization of an 

intermetallic interface 

G. Lucas, Ecole Polytechnique 

Fédérale de Lausanne (EPFL, 

Lausanne, Switzerland; P. Burdet, 

Ecole Polytechnique Fédérale de 

Lausanne (EPFL, Lausanne, 

Switzerland et al. 

Synthesis and 

characterisation of novel 

magnetron sputtered 

Cr-Zr-O thin films with 

corundum-type structure 

S. Spitz, KIT, Karlsruhe, Germany; 

M. Stüber, H. Leiste, S. Ulrich, H. J. 

Seifert, KIT, 


Thermodynamic prediction 

of phase formation in 

applied Mg alloys 

J. Gröbner, Clausthal University of 

Technology, Clausthal-Zellerfeld, 

Germany; R. Schmid-Fetzer, 

Clausthal University of Technology, 

Clausthal-Zellerfeld, Germany 

Sulfated 

glycosaminoglycans as 

components of artificial 

extracellular matrices 

(aECM) 

M. Schnabelrauch,S. Möller, J. 

Becher, INNOVENT e. V., Jena, 

Germany; T. Riemer, J. Schiller, 

University of Leipzig, Germany; V. 

Hintze, S. Bierbaum, D. 

Scharnweber, H. Worch, Technische 

09:30 

Orientation and Phase 

Analysis of Nanograins by 

Transmission Electron 

Microscopy 

M. Seyring, Institute of Materials 

Science and Technology, Friedrich 

Schiller University, Jena, Germany; 

X.Y. Song, College of Materials 

Science and Engineering,Beijing 

University of Technology, Beijing, 

Investigation of the 

Mechanical and Tribological 

Properties of a Ti/TiAlN 

Multilayer System Depending 

on the Bias Voltage 

and the Nitrogen Flow 

W. Tillmann, Institute of Materials 

Engineering, Technische Universität 

Dortmund, Germany; T. Sprute, 

Institute of Materials Engineering, 

Technische Universität Dortmund, 


Ressource efficiency 

improvements by 

calculation of materials 

properties and process 

simulation 

U. Diekmann, Metatech GmbH, 

Kamen, Germany 

M. Zemko, Comtes FHT a.s., 

Dobrany, Czech Republic 

Fabrication of highly porous 

PU/PLDL sponges with 

parallel channels intended 

for spinal cord regeneration 

A. Lis, AGH University of Science and 

Technology, Krakow, Poland; 

D. Szarek, Wroclaw University 

Hospital, Wroclaw, Poland; 

M. Krok, AGH University of Science 

and Technology, Krakow, Poland et 


A review of grain 

boundaries and triple 

junctions and their effect on 

microstructural evolution 

A. D. Rollett, Carnegie Mellon 

University, Pittsburgh, USA 

09:45 

Simultaneous Analysis of 

Structure and Orientation in 

Polymeric Fibers by 

Wide-angle X-ray Diffraction 

W. Steinmann (Sp), T. Vad, G. 

Seide, T. Gries, G. Roth, RWTH 

Aachen University (Germany) 

Characterization and 

Corrosion Resistance of PVD 

and CGS Coatings 

B. Pelic, Freiberg University of 

Mining and Technology (TUBAF), 

Institute of Materials Science, 


SGTE - Thermochemical 

Databases 

T. Markus, Forschungszentrum 

Jülich GmbH, IEK-2, D-52425 Jülich, 

Germany; 

A. T. Dinsdale National Physics 

Laboratory, Hampton Road, 

Teddington, Middlesex, TW11 0LW, 

Biomimetic poly(glycerol 

sebacate) (PGS) scaffolds for 

cardiac patch application 

R. Rai, University of 

Erlangen-Nuremberg, Erlangen, 

Germany; E. Rosellini, University of 

Pisa, Pisa, Italy; N. Barbani, 

University of Pisa, Pisa, Italy: C. 

Frati, University of Parma, Parma, 

10:00 

Kinetics of deformation 

processes in high-alloyed 

cast TRIP/TWIP steels 

determined by acoustic 

emission and scanning 

electron microscopy 

A. Weidner, Institute of Materials 

Engineering, TU Bergakademie 

Freiberg, Freiberg, Germany et al. 

Production of Functional 

Materials in Molten Salts 

S. Kuznetsov, Institute of Chemistry, 

Kola Science Centre RAS, Apatity, 

Russia 

Thermodynamic 

Calculations and Phase 

Equilibria in the Mg-Al-Zn 

System 

Nadine Heiden, Freiberg University 

of Mining and Technology, Institute 

for Materials Science, Freiberg, 


Elastic Polymeric 

Biomaterials in High 

Resolution 3 D Structures for 

Regenerative Medicine 

Günter E. M. Tovar (1, 2)*, C. 

Bierwisch (3), K. Borchers (1), M. 

Dettling (1), S. Engelhardt (4), C. 

Graf (5), E. Hoch (2), R. Jaeger (3), 

W. Meyer (6), E. Novosel (2), P. 

Kluger (1), H. Krüger (6), O. Refle 

Integral simulation of grain 

boundary migration and 

related phenomena 

L.A. Barrales-Mora, IMM, Aachen, 

Germany; D.A. Molodov, IMM, 

Aachen, Germany; L.S. 

Shvindlerman, IMM, Aachen, 

Germany; G. Gottstein, IMM, Aachen, 

Germany; 

10:15 


Poster 1: D1-1035 

Poster 2: D1-159 


SintClad: A novel approach 

to produce wear resistant 

tools 

M. Blüm, Ruhr-Universität Bochum, 

Institute of Materials, Chair of 

Materials Technology, Bochum, 

Germany; H.Hill, Ruhr-Universität 

Bochum, Institute of Materials, Chair 

of Materials Technology, Bochum, 

Thermo-kinetic computer 

simulation of differential 

scanning calorimetry curves 

of Al-Cu alloys 

J.Wu, Institute of Materials Science 

and Technology, Vienna University 

of Technology, Vienna, Austria; A. 

Falahati, Institute of Materials 

Science and Technology, Vienna 

University of Technology, Vienna, 





Simulations of Grain 

Boundary Migration via the 

Nucleation and Growth of 

Islands 

C. P. Race, Max-Planck-Institut für 


Germany; J. von Pezold, 



Germany; J. Neugebauer, 

10:30 


29

am 

Wednesday 

Symposium: A5 




Symposium: A7 




Symposium: B4 




Symposium: B7 




Symposium: B5 


Very High Cycle Fatigue 

11:15 

TCO 

A. Klein, Technische Universität 



Electrical transport properties 

of highly-doped ZnO and 

ZnMgO layers: role of grain 

barriers and 

crystallographic defects 

K. Ellmer; A. Bikowski, 

Helmholtz-Zentrum für Materialien 

und Energie, Berlin, Germany 

Electrode Materials II 

U. Preiss, Ruhr-Universität Bochum 

(Germany) 

Nanoanalysis of Lithium-Tin 

Anodes 

F. Berkemeier, University of Münster, 


M. Ibrahim, University of Münster, 


F. Inkmann, University of Münster, 


Advanced Simulation and Testing 

N. Wanderka, Helmholtz-Zentrum 

Berlin für Materialien und Energie 

GmbH (Germany) 

Multi-axial in-situ 

mechanical testing on the 

time-of-flight neutron strain 

scanner POLDI 

J.Repper, Paul Scherrer Institut, 

Materials Science and Simulation, 

NUM/ASQ, 5232 Villigen PSI, 

Switzerland; 

M. Niffenegger, Paul Scherrer 

Institut, Laboratory for Nuclear 

Bottom-up and alternative techniques 

M. Hockauf, CEWUS Chemnitzer 

Werkstoff- und 

Oberflächentechnik GmbH 

Parameters (Germany) on Densification, 

Microstructure, Hardness 

and Fracture Toughness of 

Nanocrystalline WC-12Co 

consolidated by Spark 

Plasma Sintering 

L. Krüger, TU Bergakademie Freiberg, 

Germany; K. Mandel, TU 

Bergakademie Freiberg, Germany 

VHCF-1 (FRP and nonferrous 

metals&alloys) 

P. Wierach, Deutsches Zentrum für 

Luft- und Raumfahrt e.V., 

Braunschweig (Germany) 

Nondestructive 

Characterization and Testing 

of Carbon Fiber Reinforced 

Composites in the Very 

High Cycle Fatigue Regime 

T.B. Helfen1, U. Rabe1, S. 

Hirsekorn1, C. Boller1, D. Backe2, F. 

Balle2, D. Eifler2 

1 Saarland University, 2 Institute of 

Materials Science and Engineering 

(WKK), Kaiserslautern, Germany 

11:30 

New intermetallic anode 

materials for Li-Ion batteries 

H. Flandorfer, University of Vienna, 

Inorganic Chemistry / Materials 

Chemistry, Vienna, Austria 

S. Fürtauer, University of Vienna, 

Inorganic Chemistry / Materials 

Chemistry, Vienna, Austria 

Internal stresses and 

microstructure studied by 

neutron diffraction profile 

analysis: comparison with 

other techniques 

V. Davydov, Paul Scherrer Institut, 

Materials Science and Simulation, 

ASQ-NUM, 5232 Villigen, 

Switzerland; P. Lukác, Nuclear 

Physics Institute, Czech Republic; 

M. Petrenec, Institute of Physics of 

Ultrafine-grained Ti-based 

composites with high 

strength and low modulus 

fabricated by spark plasma 

sintering 

C. Yang, L.M. Zou, S.G. Qu, Y.Y. 

Li,National Engineering Research 

Center of Near-net-shape Forming for 

Metallic Materials, South China 


Guangzhou 510640, People’s 

Lifetime and crack initiation 

of fcc materials in small 

scale under multiaxial cyclic 

loading in the very high 

cycle fatigue regime 

Thomas Straub, Karlsruhe Institute 

of Technology, Karlsruhe, Germany; 

Christoph Eberl, Karlsruhe Institute 

of Technology, Karlsruhe, Germany. 

11:45 

Orientation dependent 

surface potentials of In2O3 

and ITO 

M. V. Hohmann, Surface Science 

Division, Materials and Earth 

Science, Technische Universität 


Ordered Macroporous 

Germanium Electrodeposited 

from ionic liquid as 

Negative Electrodes for 


Jiupeng Zhao,School of Chemicl 

Engineering and Technology, Harbin 

Institute of Technology, 150001, 

Harbin, China; Xin Liu, Centre for 

Composite Material, Harbin Institute 

of Technology, 150001, Harbin, 

Strain hardening 

mechanism in 

nanocrystalline austenitic 

steel studied by in situ 

synchrotron X-ray 

diffraction 

M.A. Weisser, Paul Scherrer Institut, 

Villigen, Switzerland and EPFL, 

Lausanne, Switzerland; 

P. Schloth, Paul Scherrer Institut, 

Villigen, Switzerland and EPFL, 

Lausanne, Switzerland et al. 

Grain Refinement of 

Magnesium Alloy AZ31 by 

Torsion Extrusion 

S. Mizunuma, Kanagawa Institute of 

Technology, Atsugi, Japan; H. 

Okumura, Kanagawa Institute of 

Technology, Atsugi, Japan; K. 

Mitsui, Kanagawa Institute of 

Technology, Atsugi, Japan; M. 

Numerical and experimental 

investigations on 

microdamage development 

in cyclically loaded 

fibre-reinforced plastics 

Ch. Hopmann, Institute of Plastics 

Processing at RWTH Aachen 

University (IKV), Aachen, Germany; 

J. Marder, Institute of Plastics 

Processing at RWTH Aachen 

University (IKV), Aachen, Germany 

12:00 

Transparent Conductive 

Oxides as Front Contact for 

CdTe Thin Film Solar Cells 

A. Fuchs, Technische Universität 

Darmstadt, Darmstadt, Germany; A. 

Klein, Technische Universität 

Darmstadt, Darmstadt, Germany; W. 

Jaegermann, Technische Universität 

Darmstadt, Darmstadt, Germany 

Si/SiCN Composites as 

Anode Material for Lithium 

Ion Batteries: Influence of a 

SiCN Matrix on the 

Electrochemical Performance 

of Silicon 

L.M. Reinold, J. Rohrer, M. 

Graczyk-Zajac, R. Riedel, TU 


Cryogenic Testing of 

Advanced Stainless Steels for 

Application to Fusion 

Magnets 

D. J. Marcinek, CERN - the European 

Organization for Nuclear Research, 

Geneva, Switzerland; S. Sgobba, 

CERN - the European Organization 

for Nuclear Research, Geneva, 


Phase transformation 

behavior induced by 

shot-peening for Fe-33%Ni 

alloys 

H. Sato, Nagoya Institute of 

Technology, Nagoya, Japan; T. 

Nishiura, Nagoya Institute of 

Technology, Nagoya, Japan; T. 

Kunimine, Nagoya Institute of 

Technology, Nagoya, Japan et al. 

Influence of testing 

frequency on the VHCF 

behavior of the aluminium 

alloy EN-AW6060 in two 

age hardening conditions. 

L. Schlicker, Technische Universität 


C. Fischer, Technische Universität 


R. Wagener, Fraunhofer LBF, 


12:15 

Electronic defects at 

p-channel / dielectric 

interface in oxide field-effect 

transistors 

Jonas Deuermeier(1,2), Thorsten 

Bayer(1), Andreas Klein(1), 

Rodrigo Martins(2), and Elvira 

Fortunato(2); 

1: Department of Materials and Earth 

Science, TU Darmstadt, Petersenstr. 

Synthesis of carbon-coated 

silicon (Si@C) nanoparticles 

by laser pyrolysis for new 

anode material in 

Lithium-Ion Batteries (LIB) 

A. Quinsac, CEA Saclay, Gif sur 

Yvette, France ; Y. Leconte, CEA 

Saclay, Gif sur Yvette, France ; N. 

Herlin-Boime, CEA Saclay, Gif sur 

Yvette, France ; M. Brestaz, CEA 

Grenoble, Grenoble, France et al. 

Dislocation interactions in 

metal nanoparticles under 

high pressure 

A. Tolvanen, Techical University of 

Darmstadt, Darmstadt, Germany; K. 

Albe, Techical University of 


Near-equilibrium Solubility 

of Silver in nanocrystalline 

Copper 

K. Eymann, Technische Universität 

Dresden, Dresden, Germany 

T. Riedl, Technische Universität 


A. Kirchner, Technische Universität 


Variable Amplitude Loading 

of 2024-T351 Aluminium 

Alloy at Low and Ultrasonic 

Frequency 

H. Mayer, BOKU University, Vienna, 

Austria; 

M. Fitzka, BOKU University, Vienna, 

Austria; 

R. Schuller, BOKU University, 

Vienna, Austria; 

12:30 


Degradation phenomena 

and long-term stability of 

In2O3 and SnO2 gas 

sensors 

A.Gurlo, Fachbereich Material und 

Geowissenschaften, Technische 

Universitaet Darmstadt, Germany 

Si Microwire Arrays as 

Anode Material of Next 

Generation Li-Ion Batteries 

with the Highest Possible 

Capacity 

E. Quiroga-González, Institute for 

Materials Science of the University of 

Kiel, Kiel, Germany; J. Carstensen, 

Institute for Materials Science of the 

University of Kiel, Kiel, Germany et 

al. 

How do silks cope with 

'stress'? Mechanical 

properties of silks under 

load 

J. Guan, University of Oxford, 

Oxford, UK; 

D. Porter, University of Oxford, 

Oxford, UK; 

F. Vollrath, University of Oxford, 

Oxford, UK. 

Effect of surface severe 

plastic deformation and 

shot peening on the fatigue 

strength of low carbon steel 

E. Bruder, TU Darmstadt, Darmstadt, 

Germany; 

J. Schuster, TU Darmstadt, 


C. Müller, TU Darmstadt, Darmstadt, 

Germany 






30 


Wednesday 

am 

Symposium: D1 





New Techniques in Microstructure 


A. Froideval Zumbiehl, Paul Scherrer 

Institut, Villigen (Switzerland) 

Symposium: C4 



Wear protection and friction 

reduction II 

M. Stüber, Karlsruher Institut für 

Technologie (Germany) 

Symposium: E2 


Computational 

Thermodynamics and 

Kinetics 

Kinetics of diffusion and phase 

transitions 

I. Steinbach, Ruhr-Universität 

Bochum (Germany) 

Symposium: F1 



Implants and medical devices 

I. Roy, University of Westminster, 

London (UK) 

Symposium: Y1 







J. Driver, École des Mines de 

Saint-Etienne, Saint-Etienne (France) 

Atom Probe Tomography 

Analysis of Local Chemistry 

Fluctuations in Fe-based 

Alloys Affecting Bulk 

Deformation Behaviour 

R.K.W. Marceau, Max-Planck-Institut 

für Eisenforschung, Düsseldorf, 

Germany; D. Raabe, 



Germany; 

Decomposition process in 

metastable nanoscaled 

TiN/(Ti,Al)N/AlN 

multilayers 

U. Ratayski, Institute of Materials 



F. Klimaschin, Institute of Materials 



An investigation into the C 

and Mn partitioning at the 

austenite-ferrite interface in 

the intercritical region for 

Fe-Mn-C alloys 

Hao Chen, Delft University of 

Technology, Delft, The Netherlands; 


University of Technology, Delft, The 

Netherlands; 

The Application of 

Nanomodified Surface for 

Donor Cornea Storage and 

Transportation 

Dr.Alvina D.Musina,Russian Institute 

of Eye and Plastic Surgery, 

Moscow,Russia 

Dr.Eugene E.Sidorenko, Russian 

State Medical University, Moscow, 

Russia. 


Capillary-Mediated Dendritic 

Branching 

Martin E. Glicksman, Florida Institute 

of Technology, Melbourne, USA 

11:15 

The use of three 

dimensional x-ray 

diffraction contrast 

tomography for grain 

growth studies in ceramics 

M. Bäurer, W. Rheinheimer, M. 

Syha, D. Weygand, KIT,Karlsruhe, 

Germany; E. M. Lauridsen,Technical 

University of Denmark, Roskilde, 

Denmark; W. Ludwig, ESRF, 

Grenoble, France; P. Gumbsch, 

The Amorphous Range in 

Sputtered Ti-Ni-Cu 

Combinatorial Thin-Film 

Libraries 

Y. Motemani, A. Savan , S. 

Thienhaus, Y. Al-Zain, A. Ludwig, 

Institute of Materials, Faculty of 

Mechanical Engineering, 

Ruhr-University Bochum, 44801 

Bochum, Germany. 

Thermodynamics of Surface 

Stress in Solids and its 

Calculation by Atomistic 

Methods 

P. M. Diehm, Technische Universität 




Polymeric Inorganic 

Biomaterials: Modulation of 

RANK/RANKL/OPG 

Pathway by Bio-silica and 

PolyP 

H.C. Schröder, University Medical 

Center of the Johannes Gutenberg 

University, Mainz, Germany; X.H. 

Wang, University Medical Center of 

the Johannes Gutenberg University, 

Mainz, Germany et al. 

11:30 

Micro-Laue Simulation from 

3D Discrete Dislocation 

Dynamic Simulations for 

Dislocation Structures 

Analysis of In-Situ Deformed 

Micro-Pillar 

C. Le Bourlot, MSS, PSI, CH-5232 

Villigen PSI, Switzerland 

S. Van Petegem, PSI, CH-5232 

Villigen PSI, Switzerland 

C. Marichal, PSI, CH-5232 Villige 

PSI, Switzerland 

High-temperature 

self-healing Cr2AlC coating 

C. Leyens, Technische Universität 

Dresden, Dresden, Germany; O. 

Berger, Technische Universität 

Dresden, Dresden, Germany; M. to 

Baben, RWTH Aachen, Aachen, 

Germany, J.M. Schneider, RWTH 

Phase field modeling of 

eutectic formation in binary 

alloys 

Morteza Amoorezaei, Sebastian 

Gurevich, David Montiel, Nikolas 

Provatas 

Influence of a Surface 

Mechanical Attrition 

Treatment in the wear 

particles morphology in a 

Ti6Al4V 

Luciane Yumi Suzuki de Oliveira, 

lysuzuki@gmail.com 

Universidade Federal do Paraná – 

UFPR 

Delphine Retraint, 

delphine.retraint@utt.fr 


Application of Stochastic 

Geometry to Nucleation and 

Growth Transformations 

P. Rios (Sp), Universidade Federal 

Fluminense, Volta Redonda (Brazil); 

E. Villa, University of Milan, Milano 

(Italy) 

11:45 

Contact resonance atomic 

force microsc: nanometerresolved 

mechanical surface 

properties of Ni-Mn-Ga 

single crystal films 

A.M. Jakob, S.G. Mayr 

Leibniz-Institut für 

Oberflächenmodifizierung, 

Translationszentrum für regenerative 

Medizin und Fakultät für Physik 

und Geowissenschaften, Universität 

Three Step Oxidation 

Process for the Creation of 

Oxidized Zirconium 

M. Reif, University Bayreuth, 


F. Scherm, University Bayreuth, 


U. Glatzel, University Bayreuth, 



Bioactive mixed-ceramic 

Stress stabilized precipitation surface coating of zirconia 

in microalloyed steels for dental and orthopedic 

Efim Borukhovich, Reza Darvishi applications 

Kamachali, Ingo Steinbach, K. Pardun, University of Bremen, 

Interdisciplinary Centre for Advanced Bremen, Germany; 

Materials Simulation (ICAMS), L. Treccani, University of Bremen, 

Ruhr-University Bochum, Germany Bremen, Germany; 

K. Rezwan, University of Bremen, 

Bremen, Germany 

12:00 

Characterisation of 

Hydrogen Storage Materials 

and Tank Systems Using 

Neutrons and Photons 

F. Karimi, P.K. Pranzas, U. 

Bösenberg, O. Metz, F. Beckmann, 

M. Dornheim, T. Klassen, A. 

Schreyer, Helmholtz-Zentrum 

Geesthacht, Geesthacht, Germany 

U. Vainio, E. Welter, DESY, Hamburg, 


HIPIMS: Technology and 

Applications 

R. Bandorf, Fraunhofer Institute for 

Surface Engineering and Thin Films, 

Braunschweig, Germany 

Analysis of the Microsegregation 

in Sr modified 

Al Alloys with a Multiphase 

Field Approach coupled to 

CALPHAD Databases 

M. Apel, Access e.V.,RWTH Aachen, 

Aachen, Germany; J. Eiken, Access 

e.V.,RWTH Aachen, Aachen, Germany 

Crack propagation in 

3/8Y-TZP multilayered 

ceramics produced by EPD 

C. Fleckenstein, Charité 

Universitätsmedizin Berlin, 

Zahnärztliche Werkstoffkunde und 

Biomaterialforschung Centrum ZMK 

(CC3), Berlin et al. 

Junction Controlled Grain 

Growth: An Investigation by 

Simulation and Theory 

D. Zöllner, IP. Streitenberger, Institut 

für Experimentelle Physik, 

Otto-von-Guericke-Universität 

Magdeburg, Germany 

12:15 






Theory of diffusion under 

strain and simulation of 

elastic field and impurity 

atoms segregation form. in 

the vicinity of dislocations 

A.V. Nazarov, SSC RF Institute for 

Theoretical and Experimental 

Physics (ITEP), Moscow, Russia; 

E.V. Reshetnikova, National research 

nuclear university (MEPhI), 

I.V.Ershova,Moscow,Russia et al. 




Poster 3: F1-1097 

Linking mesoscale grain 

growth modelling and real 

three dimensional grain 

structures 

M. Syha, M. Bäurer, W. 

Rheinheimer, IAM, KIT, Karlsruhe, 

Germany; W. Ludwig, ESRF, 

Grenoble, France; E.M. Lauridsen, 

Risoe, Danmark; D. Weygand, IAM, 

KIT, Germany 

12:30 


31

pm1 

Wednesday 

Symposium: A5 




Symposium: A7 




Symposium: B4 




Symposium: B6 


Hybrid Structures 

Symposium: B5 



OLED 

Modelling and Simulation 

Non Ferrous Alloys I 

Hybrid Materials and Components 

VHCF-2 (steels) 

14:45 

A. Gassmann, Technische Universität 



Charge transport and 

recombination in organic 

light-emitting diodes 

Paul W.M. Blom1,2, Martijn Kuik1, 

Gert-Jan Wetzelaer1, Herman T. 

Nicolai1; 1 University of Groningen, 

The Netherlands; 2Holst Centre TNO, 

Eindhoven, The Netherlands 

D. Cupid, Karlsruher Institut für 

Technologie, 


(Germany) 

Thermodynamic 

assessment of the Li-Co-O 

system 

K. Chang (Sp), B. Hallstedt, D. 

Music, RWTH Aachen (Germany) 

V. Davydov, All-Union Institute of 

Light Alloys, Moskau (Russian 

Federation) 

Microstructure Evolution 

during Steady-State 

Dynamic Recrystallization 

K. Grätz (Sp), G. Gottstein, RWTH 

Aachen University (Germany) 

N. Modler, Technische Universität 

Dresden (Germany) 

Integration of 

glassfibre-structures in 

aluminium cast parts for 

CFRP-aluminium transition 

structures 

J. Clausen, M. Busse Fraunhofer 

IFAM, Bremen, Germany; A. Lang, 

Faserinstitut Bremen e.V. (FIBRE), 

Universität Bremen, Germany 

C. Eberl, Universität Karlsruhe (TH) 

(Germany) 

Influence of microstructure 

on the very high cycle 

fatigue behaviour of carbon 

steels 

J. Bach, IH. W. Höppel, M. Göken, 

Institute I: General Materials 

Properties, Universität 


Germany 

15:00 

Phasefield modeling with 

anisotropic diffusion and 

elastic deformation: Li-intercalation 

in LiFePO4-cathods 

for rechargeable Li-ion 

battery applications 

Holger Federmann, Universität 

Bayreuth, Materials and Process 

Simulation, Bayreuth, Germany; 

Michael Fleck, Universität Bayreuth, 

Materials and Process Simulation, 


Grain Size Evolution of 

High-Purity Copper under 

Reciprocating Tribological 

Loading 

Christian Greiner, Karlsruhe Institute 

for Technology, Institute for Applied 

Materials, Karlsruhe, P. Gumbsch, 

Fraunhofer Institute for Mechanics of 

Materials IWM, Freiburg, Germany 

Integration of PZT-Ceramic 

Modules using Hybrid 

Structures in High Pressure 

Die Casting 

M. Schwankl, University of 


Germany; A. Klassen, University of 


Germany; Prof. C. Körner, University 

of Erlangen-Nuremberg, Erlangen, 

Study of Three-Dimensional 

Effects of Microstructural 

Barriers on Crack Initiation 

in Duplex Stainless Steel 

during VHCF Loading 

B. Dönges, Universitaet Siegen, 

Siegen, Germany; A. Giertler, 

Hochschule Osnabrueck, 

Osnabrueck, Germany; K. Istomin, 

Universitaet Siegen, Siegen, 

Germany; W. Ludwig, ESRF, 

15:15 

The effect of electrical fatigue 

on hole transport in 

poly(p-phenylenevinylene)-b 

ased organic light-emitting 

diodes 

Katja Stegmaier, Electronic Materials 

Division, Institute of Materials 


Darmstadt, Germany et al. 


Lithiation of Si Embedded in 

SiC(N,O) Ceramics: Structure, 

Energetics & Kinetics from 

Density-Funct- ional Theory 

Calculations 

J. Rohrer, TU Darmstadt, 64287 


K. Albe, TU Darmstadt, 64287 

Darmstadt, Germany. 


properties of Cu2.0AlCrFeNi 

high-entropy alloy 

J.H.Pi,Y.Pan,J.L.Wu, School of 

Material Science and Engineering, 

Southeast University, Nanjing, 

China 

Integrated sensor network 

components in 

textile-reinforced composites 

A.Heinig, Fraunhofer Institute 

Photonic Microsystems, Dresden, 

Germany;A.Kunadt, Technical 

University Dresden, Dresden, 

Germany; E.Starke, Technical 

University Dresden, Dresden, 

The Applicability of Linear 

Elastic Fracture Mechanics 

on the Characterization of 

Crack Initiation in the 

VHCF-Regime of High 

Strength Steels 

P. Grad, Technische Universität 

Kaiserslautern, Kaiserslautern, 

Germany; E. Kerscher, Technische 

Universität Kaiserslautern, 

Kaiserslautern, Germany 

15:30 

Self-consistent description of 

charge-carrier transport and 

recombination in organic 

light-emitting diodes 

S.V. Yampolskii, Yu.A. Genenko, H. 

von Seggern, Institut für 

Materialwissenschaft, Technische 

Universität Darmstadt, Germany 

An Interface Dissipation 

Phase Field Model for 

Electrochemistry 

U. Preiss, Ruhr-Universität Bochum, 


High Temperature Oxidation 

and Mechanical Properties 

of High Entropy Alloys 

H.M. Daouda, A. Manzonib, R. 

Voelkla, N. Wanderkab, U. Glatzela 

a Metals and alloys, Bayreuth 

University, Ludwig-Thoma Street. 

36b, 95447 Bayreuth, Germany 

b Helmholtz-Zentrum Berlin für 

Dynamic Mechanical 

Behaviour of Short 

Bamboo/Glass Fiber 

Reinforced Epoxy based 

Hybrid Composites 

S. Biswas, National Institute of 

Technology, Rourkela, India, P. A. 

Xess, National Institute of 

Technology, Rourkela, India 

Multiple-flaw failure of 

bearing steel SAE 52100 in 

the VHCF regime and its 

appraisal 

K. Burkart; H. Bomas; H.-W. Zoch, 

Stiftung Institut für 

Werkstofftechnik, Bremen, Germany 

15:45 

Gilch synthesis of Poly 

(p-phenylene vinylenes): 

Impact of constitutional 

defects on the performance 

of light-emitting devices 

N. Vilbrandt, Technische Universität 

Darmstadt, Darmstadt, Germany; M. 

Rehahn, Technische Universität 


An ab-initio investigation of 

the reversible formation of 

lithium oxides in lithium-air 

batteries 

N. Seriani, ICTP, Trieste, Italy 

Characterization of 

microstructural plasticity 

mechanisms in TNTZ-O 

alloys 

E. Plancher, Max-Planck-Institut für 

Eisenforschung, Dusseldorf, 

Germany, C.C. Tasan, 


Eisenforschung, Dusseldorf, 

Germany, D. Raabe, 

Hybrid Blends of 

Organic/Inorganic 

Polymers for potential 

anti-flame applications 

O. Flores, Ceramic Materials and 

Engineering, University of Bayreuth, 


A. Prette, Ceramic Materials and 

Engineering, University of Bayreuth, 


Influence of hydrogen and 

aluminium deoxidation 

practice on the VHCF 

behaviour of steel SAE 

52100 

Torben Karsch, Hubert Bomas, 

Hans-Werner Zoch 

IWT, Stiftung Institut für 

Werkstofftechnik, 28359 Bremen, 

Germany 

16:00 


Fundamental Surface and 

Interface Properties of ITO 

for organic electronics 

A. Klein, Technical University of 


Thermodynamic 

Assessment of Cu-Sn and 

Cu-Li-Sn Systems as Anode 

Materials for Li-ion Batteries 

D. Li, Karlsruhe Institute of 


Materials – Applied Materials 

Physics (IAM-AWP), 


et al. 

Improvement of Sinterability 

and Mechanical Properties 

of B4C/Ti-6Al-4V by 

Deoxidising Agents 

T.Takizawa,Nihon 

University,Funabashi,Japan;H.kanaza 

wa,Nihon 

University,Funabashi,Japan;H.Izui,Ni 

hon University,Funabashi,Japan 

Development of a new 

hybrid material of textile 

reinforced concrete and 

glass fibre reinforced plastic 

H. Funke, Chemnitz University of 

Technology, Chemnitz, Germany; S. 

Gelbrich, Chemnitz University of 

Technology, Chemnitz, Germany; A. 

Ehrlich, Chemnitz University of 







32 


Wednesday 

pm1 

Symposium: C1 



Composites 

metals/ceramics 

F. Kern, Universität Stuttgart 

(Germany) 

Symposium: C4 



Coating for Light & heat 

management I 

M. Willert-Porada, Universität 

Bayreuth (Germany) 

Symposium: E4 


Transport Phenomena in 

Nanoscale Devices 

Spin and quasi-particle effects 

P. Zahn, Helmholtz-Zentrum 

Dresden-Rossendorf (Germany) 

Symposium: F3 


Bio-Inspiration and 

Bio-Engineering 

Bio-Inspiration 

I. Burgert, ETH Zürich (Switzerland) 

Symposium: Y1 







M. Glicksman, Florida Institute of 

Technology, Melbourne (USA) 


multilayer silicate ceramics 

in relation to the 

microstructural organization 

K. Boussois,GEMH-ENSCI, Limoges, 

France 

N. Tessier-Doyen, GEMH-ENSCI, 

Limoges, France 

P. Blanchart, GEMH-ENSCI, Limoges, 

France 


Solution Processed 

Transparenct Electrodes for 

Thin Film Opto-electronic 

Applications 

C. Brabec, 


Erlangen-Nürnberg, Erlangen 

(Germany) 


Pseudo-Spin Filter in Carbon 

Nanotubes 

L. Mayrhofer, Fraunhofer IWM, 

Freiburg, Germany; D. Bercioux, 

Freiburg Institute for Advanced 

Studies, Freiburg, Germany 

Finite Element Modeling of 

the Cyclic Wetting 

Mechanism in the Active 

Part of Wheat Awns 

G.A. Zickler, Institute of Mechanics, 

Montanuniversitaet Leoben, Leoben, 

Austria; 

D. Ruffoni, Institute for 

Biomechanics, ETH Zurich, Zurich, 



Microstructure and Texture 

Design of NiAl via 

Thermo-mechanical 

Processing 

W. Skrotzki, TU Dresden, Germany 

14:45 

Tribological Property of 

Un-bundled Carbon 

Nanotubes Coated Titanium 

Plate 

K. Kondoh, Osaka University, 

Ibaragi, Japan; J. Umeda, Osaka 

University, Ibaragi, Japan; B. 

Fugetsu, Hokkaido University, 

Sapporo, Japan 

Bionic Chemistry & Bionic 

Tectons: Protein-Based 

Systems Controlling 

Processes from the Nano- to 

the Macro Scale 

S. Schiller, University Freiburg, 

Freiburg, Germany 

15:00 

Nanolaminate Cr2AlC 

coatings for use at 

temperature between 900 to 

1200°C 

O. Berger,Institute of Materials 

Science, TU Dresden, D-01062 

Dresden, Germany; C. 

Leyens,Institute of Materials Science, 

TU Dresden, D-01062 Dresden, 


Soluion-Stamping Processed 

Al Thin Film for Electronics 

Hye Moon Lee, Korea Institute of 

Materials Science, Changwon, Korea; 

Jung-Yeul Yun, Korea Institute of 

Materials Science, Changwon, Korea; 

Si-Young Choi, Korea Institute of 

Materials Science, Changwon, Korea 


Spin Filtering in 

FM|Graphite|FM junctions 

Diana Otalvaro, Deniz Cakir, Geert 

Brocks, University of Twente, NL 

Bioinspired Actuated 

Adhesive Patterns of Liquid 

Crystalline Elastomers 

J. Cui,Max-Planck-Institut für 

Polymerforschung, Mainz, Germany 

A. del Campo,Max-Planck-Institut 

für Polymerforschung, Mainz, 

Germany 

Texture memory effect of 

heavily cold-rolled Ni3Al 

Masahiko Demura, National Institute 

for Materials Science, Tsukuba, 

Ibaraki, Japan; Ya Xu, , National 


Tsukuba, Ibaraki, Japan; Toshiyuki 

Hirano. 

15:15 

Mechanical Recovery on 

Various Volume Fraction of 

Nano-Ni Dispersed Al2O3 

Hybrid Materials via 

Thermal Oxidation 

D. Maruoka, Nagaoka University of 

Technology, Nagaoka, Japan, M. 

Nanko, Nagaoka University of 

Technology, Nagaoka, Japan 

Synthesis of TiN-AlN 

composites using 

mechanical alloying and 

the spark plasma sintering 

technique 

David Chmelik,Technical University 

of Freiberg, Institute of Materials 

Science, Freiberg, Germany; David 

Rafaja, Technical University of 

Freiberg, Institute of Materials 

Science, Freiberg, Germany et al. 

Thermoelectric Properties of 

Metal Hexaboride 

Synthesized by Using 

Nano-Sized Powder 

M. Takeda, Nagaoka University of 

Technology, Nagaoka, Japan; K. 

Inayoshi, Nagaoka University of 


Conventional- and 

Microwave Plasma 

Assisted-Chemical Vapor 

Deposition of Titanium 

Dioxide on Glass Substrate 

Z. Negahdari, Chair of Materials 

Processing, University of Bayreuth, , 

Germany A. Rosin, University of 

Bayreuth, Germany, M. 

Willert-Porada, University of 


Coating and wetting of 

semiconducting organic 

and hybrid films: 

Fluid-dynamic properties, 

process parameters, and 

wetting behavior 

L. Wengeler, KIT, Karlsruhe, 

Germany; M. Schmitt, KIT, 

Karlsruhe, Germany; K. Peters, KIT, 

Karlsruhe, P. Scharfer, KIT, Karlsruhe, 

Germany; W. Schabel, KIT, 

Karlsruhe, Germany; 

Simulation of chlorine-free 

CVD coatings of titania on 

glass 

A. Rosin, University of Bayreuth, 

Germany, Z. Negahdari, University 

of Bayreuth, M. Willert-Porada, 

University of Bayreuth, Germany, A. 

Treuner, Wiegand Glaswerke GmbH, 

Steinbach a.W., Germany 

Remote phonon scattering 

of charge carriers in a polar 

metal-oxide-semiconductor 

device 

Anna Hauber, Tyndall National 

Institute, University College Cork, 

Cork, Ireland; Stephen Fahy, Tyndall 

National Institute, University College 

Cork, Cork, Ireland; 

SXPS characterization of a 

merocyanine / fullerene 

hetero junction for organic 

solar cells: Growth behavior 

and occurrence of a high 

photovoltage 

E. Mankel, P. Reckers, C. Hein, Th. 

Mayer, and W. Jaegermann, 

Technische Universität Darmstadt, 

Petersenstraße 32, 64287 Darmstadt, 

Germany 

Thermodynamic stability of 

Cd2SnO4, Mg2SnO4 and 

Zn2SnO4 and their point 

defects: A comparative 

study using first-principles 

methods 

A. Fey, Technische Universität 


P. Agoston, Technische Universität 




Observations of critical 

toughening elements at mm 

and µm lengthscales in 

Macadamia nutshells in 2D 

and 3D 

C. Fleck, Materials Engineering, 

Technische Universität Berlin, 

Germany; P. Schueler, Materials 

Engineering, Technische Universität 

Berlin, Germany; P. Zaslansky et al. 

Particle-based patterning of 

biomimetic structures with 

multiple length scales 

Christina T. Huber, INM - 

Leibniz-Institute for New Materials, 

Saarbrücken; Daniel Brodoceanu, 

INM - Leibniz-Institute for New 

Materials, Saarbrücken; Anne Wonn, 

INM - Leibniz-Institute for New 





Balancing the properties of 

Mo-borosilicide alloys for 

ultra-high temperature 

structural applications 

M. Heilmaier and D. Schliephake, 

KIT Karlsruhe, Germany, M. Krüger, 

Otto-von-Guericke University 

Magdeburg, Germany, S. Burk and 

H.-J. Christ, University Siegen, 

Germany 

Development of 

Co-Re-Based Alloys for High 

Temperature Applications 

J. Rösler, Technical University 


Germany; D. Mukherji,Technical 

University Braunschweig, 


Design of Platinum-Base 

Superalloys by 

Microstructure Optimization 

U. Glatzel and R. Völkl, Metals and 

Alloys, University Bayreuth, 

Germany 

15:30 

15:45 

16:00 


33

pm2 

Wednesday 

Symposium: A3 

Symposium: A7 

Symposium: B4 

Symposium: B6 

Symposium: B5 






Magnetic Shape Memory 

Alloys and Multiferroics 







16:45 

Magnetic shape memory alloys: 

Bulk Materials and applications 

S. Fähler, Leibniz-Institut für 

Festkörper- und Werkstoffforschung 


Magnetic domains and twin 

boundary movement of 

NiMnGa magnetic shape 

memory crystals 

J. McCord, Nanoscale Magnetic 

Materials - Magnetic Domains, 


University of Kiel, Kiel, Germany 

M. Kustov, Nanoscale Magnetic 

Materials - Magnetic Domains, 

Characterization 

R. Schmid-Fetzer, Technische 

Universität Clausthal, 

Clausthal-Zellerfeld (Germany) 

Operando analysis, 

diagnostics and 

characterization of lithium 

battery cathodes with x-ray 

scattering and spectroscopy 

A. Braun and T.-W. Huang, Empa. 

Swiss Federal Laboratories for 

Materials Science and Technology, 

CH-8600 Dübendorf, Switzerland; 

E.J. Cairns, EETD, Lawrence Berkeley 

National Laboratory, Berkeley CA 

Non Ferrous Alloys II 

S. Neumeier, 



Modified equations for 

precipitation strengthening 

in Al- Cu alloys taking into 

account precipitate shape 

M.R. Ahmadi, Materials Center 

Leoben, Forschung GMBH, Austria & 

Christian Doppler Laboratory “Early 

Stages of Precipitation”, Institute of 


Vienna University of Technology, 

Manufacture Technologies 

T. Heber, Technische Universität 


Development of non-Crimp 

Multi-layered 3D-Spacer 

Fabric Structures using 

Hybrid Yarns for 

Thermoplastic Composites 

A. Mountasir, Technische Universität 

Dresden, Dresden, Germany; G. 

Hoffmann, Technische Universität 

Dresden, Dresden, Germany; Ch. 

Cherif, Technische Universität 


VHCF-3 (influencing effects) 

M. Zimmermann, Universität Siegen 

(Germany) 

Influence of High Mean 

Stresses on the Fatigue 

Behavior of a Martensitic 

Turbine Blade Steel in the 

VHCF-Regime 

S. Kovacs, Forschungszentrum 

Jülich, Jülich, Germany; T. Beck, 

Forschungszentrum Jülich, Jülich, 

Germany; L. Singheiser, 

Forschungszentrum Jülich, Jülich, 

Germany 

17:00 

Concepts for Magnetic 

Shape Memory Actuators 

Benedikt Holz, Hartmut Janocha, Uni 

Saarland, Saarbrücken, Germany 

Doping Effects on the 

Electrochemical Behavior of 

LiFePO4 

N.A. Hamid, Institute for 

Combustion and Gasdynamics 

(IVG), University of Duisburg-Essen, 

Duisburg, Germany; S. Wennig, 

Centre for fuel cell technology ZBT, 

Duisburg, Germany et al. 

Linking microstructure and 

Fracture Morphology to the 

Fracture Toughness of 7XXX 

Aluminium Alloy: a Fractal 

Dimension and Computed 

Tomography Study 

X. Wu, Material innovation institute 

(M2i) / Delft University of 

Technology, Delft, the Netherlands; 

H. Khanbareh, Material innovation 

institute (M2i) / Delft University of 

Technology, Delft, the Netherlands 

Application of transmissionbased 

solutions for 

automated manufacturing 

of thermoplastic hybrid 

sandwich structures 

W. Hufenbach, TU Dresden - Institut 

für Leichtbau und Kunststofftechnik, 

Dresden, Germany; F. Adam, TU 

Dresden - Institut für Leichtbau und 

Kunststofftechnik, Dresden, Germany 

et al. 

Influence of Near Surface 

Stress Gradients to the 

VHCF-Behavior of 42CrMo4 

K.-H. Lang 1), M. Korn 1), T. Rohm 

1),2); 1) Karlsruhe Institute of 

Technologie (KIT), Institute for 

Applied Materials - Materials Science 

and Engineering (IAM-WK), 

Karlsruhe, Germany et al. 

17:15 

Design of Linear Actuators 

Based on Magnetic Shape 

Memory Alloys 

K. Schlüter, Technische Universität 


Germany; A. Raatz, Technische 

Universität Braunschweig, 


Thermochemistry of 

Materials for the 

Development of Advanced 

Li-Ion Battery Systems 

T. Markus, Forschungszentrum 

Jülich GmbH, IEK-2, D-52425 Jülich, 

Germany 

Intergranular Corrosion of 

AA 5083-H321 Aluminium 

Alloy 

Mihaela Aurora PANA, Petru 

MOLDOVAN, Carmen Nicoleta 

STANICA, Iulian Vasile ANTONIAC, 

Politehnica University of Bucharest, 

Romania 

Devel. of a process chain for 

realisation of multilayer weft 

knitted fabrics made from 

hybrid yarns and 

comprising complex 2D/3D 

geometries for composite 

Ch. Cherif, TU Dresden, Germany; S. 

Krzywinski, TU Dresden, Germany; 

O. Diestel, TU Dresden, Germany; H. 

Lin, TU Dresden, Germany; Ch. 

Schulz, TU Dresden, Germany 

Influence of Variable 

Amplitude Loadings in the 


Regime of 34CrNiMo6 

T. Müller, M. Sander 

University of Rostock, Germany 

thomas.mueller@uni-rostock.de 

17:30 


Different Twin Boundaries in 

Ni-Mn-Ga Martensite and 

Their Mobility 

O. Heczko,Institute of Physics, 

Academy of Sciences of the Czech 

Republic, Na Slovance 2, 182 21 

Prague 8, Czech Republic 

Thin Film Calorimetry based 

on Piezoelectric Resonators 

for Characterization of 

Battery Materials 

Hendrik Wulfmeier, Clausthal 

University of Technology, Goslar, 

Germany; Daniel Albrecht, Clausthal 

University of Technology, Goslar, 

Germany; Svetlozar-Dimitrov 

Ivanov, Ilmenau University of 

Dry wear performance of 

the spray deposited 

hypereutectic 

aluminum-silicon alloys 

N. Raghukiran, Indian Institute of 

Technology Madras, Chennai, India; 

Devaraj S., Indian Institute of 

Technology Madras, Chennai, India; 

Ravi Kumar, Indian Institute of 

Technology Madras, Chennai, India. 

PLA-viscose-composites with 

continuous fibre 

reinforcement for structural 

applications 

M. Reinhardt; M. Kausch; L. Kroll, 

Technical University of Chemnitz, 


Ultrasonic fatigue tests in 

comparison with 

conventional fatigue tests 

under constant and variable 

amplitude loading 

N. Schneider, B. Pyttel, C. Berger, M. 

Oechsner, 

State Materials Testing Institute and 

Institute for Materials Technology, 


Germany 

17:45 

Kinetic and Thermokinetic 

Investigations of the 

Chemical Delithiation and 

Lithiation of Li1-xFePO4 

S. Loos, University of Mining and 

Technology, Freiberg, Germany; C. 

Thomas, University of Mining and 

Technology, Freiberg, Germany; R. 

Hüttl, University of Mining and 

Technology, Freiberg, Germany et al. 

The Study about Multiplelayer 

Formation and Control 

of AlN and Intermetallic 

Compound layer between 

Aluminum and Steel 

J. H. Kong, Toyota Technological 

Institute, Nagoya, Japan 

M. Okumiya, Toyota Technological 

Institute, Nagoya, Japan 

Y. Tsunekawa, Toyota 

Technological Institute, Nagoya, 

Sensitivity analysis for the 

manufacturing of 

thermoplastic e-preforms for 

active textile reinforced 

thermoplastic composites 

A. Hufenbach, Niels Modler, Anja 

Winkler, Technische Universität 


Influence of geometry and 

shot peening on very high 

cycle fatigue strength of 

helical compression springs 

I. Brunner, B. Pyttel, B. Kaiser, M. 

Oechsner 

State Materials Testing Institute and 

Institute for Materials Technology, 


Grafenstr. 2, 64283 Darmstadt, 

18:00 

EBSD Characterization of 

Segmented Twin Interfaces in 

10M Modulated NiMnGa 

Martensite 

R. Chulist, Institut für 

Strukturphysik, Technische 

Universität Dresden, Germany; L. 

Straka, Aalto University School of 

Science and Technology, Espoo, 

Finland; N. Lanska, AdaptaMat Ltd., 

Influence of laser-generated 

surface structures on 

electrochemical performance 

of electrode materials 

R. Kohler, Karlsruhe Institute of 



Physics, P.O. Box 3640, 76021 




Magnesium Alloy MRI230D 

Solidified under Different 

Conditions 

A. Garcia, Federal University of Rio 

Grande do Sul, Porto Alegre, Brazil; 

S. Bartex, Federal University of Rio 

Grande do Sul, Porto Alegre, Brazil; 

V. Barcellos, Federal University of 

Rio Grande do Sul, Porto Alegre, 

Processing studies for the 

development of a 

manufacture process for 

intelligent lightweight 

structures with integrated 

sensor systems and 

W. Hufenbach, TU Dresden, Institute 

of Lightweight Engineering and 

Polymer Technology, Dresden, 

Germany; W.-J. Fischer, TU Dresden, 

Institute of Semiconducters and 

Microsystems, Dresden, Germany et 





34 


Wednesday 

pm2 

Symposium: C1 



Composites 

polymers/hybrids 



(Germany) 

The influence of talc as a 

nucleation agent on the 

non-isothermal 

crystallization and 

morphology of isotactic 

polypropylene: the 

N. Kocic, SKZ - Das 

Kunststoff-Zentrum, Wuerzburg, 

Germany; K. Kretschmer, SKZ - Das 


Germany; M. Bastian, SKZ - Das 


Symposium: C4 



Coating for Light & heat 

management II 

C. Brabec, 



Titania thin films for photo 

electrochemical energy 

conversion 

D. Leykam, University of Bayreuth; 

M. Willert-Porada, University of 

Bayreuth 

Symposium: E4 




Charge transport in nanoscale 

materials 

G. Fagas, Tyndall National Institute, 

Cork (Ireland) 


Current transport through 

single molecules 

A. Erbe, Helmholtz-Zentrum 

Dresden-Rossendorf, Dresden, 

Germany, I. Wolf, T. Kirchner, Y. 

Kim, T. Huhn, E. Scheer, Universität 

Konstanz, Konstanz, Germnany 

Symposium: F3 





J. Bill, Universität Stuttgart 

(Germany) 

Bio-routes Towards 

Functional Nanocomposites: 

From Filtration to 

Plasmonics 

Mady Elbahri 1,2*, Seyed Shahin 

Homaeigohar 1, Dai Tinahe1, Dug 

Disci 2, Ramzy Abdelaziz 2, 

Kathirvel Ganesan 1, Ahnaf Usman 

Zillohu 1 


Symposium: Y1 







B. Hutchinson, Swerea-KIMAB, 

Stockholm (Sweden) 


Nanoscale Phase 

Transformations at 

Interfaces in Steels 

Dierk Raabe, Dirk Ponge, Pyuck 

Choi, Julio Millán, Steffanie 

Sandlöbes, Max-Planck-Institute for 

Iron Research GmbH, Düsseldorf, 

Germany 

16:45 

Tailored Hydrophobicity of 

Micro- Macroporous 

Ceramer Membranes 

T. Prenzel, University of Bremen, 

Advanced Ceramics, Germany, M. 

Wilhelm, University of Bremen, 

Advanced Ceramics, Germany, K. 

Rezwan, University of Bremen, 

Advanced Ceramics, Germany 

Microstructure of gas flow 

sputtered thermal barrier 

coatings 

N. Rösemann, Technische 

Universität Braunschweig, Germany; 

M. Bäker, Technische Universität 

Braunschweig, Germany; F. 

Zschausch, Technische Universität 

Braunschweig, Germany et al. 

Determination of ZnO 

binding epitopes in peptides 

D. Rothenstein, University of 

Stuttgart, Stuttgart, Germany; B. 

Claasen, University of Stuttgart, 

Stuttgart, Germany; J. Baier, 

University of Stuttgart, Stuttgart, 

Germany; T. Naumburg, University 

17:00 

Effectiveness of Nonwoven 

Filter Medium Using 

Nano-Composite 

Polypropylene Fibers on 

Bacteria Reduction of Water 

M.S.Houshmandpoor,M. Zarrebini, 

M.Morshed, Department of Textile 

Engineering, Isfahan University of 

Technology, Isfahan, Iran 

Gas Flow Sputtering - 

Process Influences on Film 

Structures 

F. Zschausch, Institut für 

Oberflächentechnik, technische 


Braunschweig, Germany; N. 

Rösemann, Institut für Werkstoffe, 



Simulation of Nanowire 

Junctionless Transistors 

from First Principles 

L. Ansari, G. Greene, S. Jones, G. 

Fagas, J.C. Greer, Tyndall National 

Institute, Cork, Ireland 

Design of Bio-based 

Multifunctional Composite 

Materials Using 

Self-assembling Bacterial 

S-layer Proteins 

K. Pollmann, HZDR, Dresden, 

Germany; U. Weinert, HZDR, Dresden, 

Germany; T. Günther, HZDR, 

Dresden, Germany; M. Suhr, HZDR, 

Dresden, Germany; M. Vogel, HZDR, 

Dresden, Germany; C. Bobeth, HZDR, 

Atom Probe Analysis of 

Interfaces in Advanced Steels 

D. Raabe, D. Ponge, J. Millan, P. 

Choi, S. Sandlöbes, Y. Lei, 

Max-Planck-Institute for Iron 

Research GmbH, Düsseldorf, 

Germany 

17:15 

New process chains for 

serial production of 

fibre-reinforced plastics 

Prof. Dr.-Ing. Christian Hopmann, 

Dipl.-Ing. Linus Fecher, Dipl.-Ing. 

Marco Pöhler, 

Dipl.-Ing. Jan Wessels 

Constrained Sintering of 

patterned Alumina films 

deposited by Micromolding 

in Capillaries 

C. Jamin, TU Darmstadt, Darmstadt, 

Germany; Olivier Guillon, Friedrich 

Schiller Universität Jena, Jena, 

Germany 

Electronic Transport of MoS2 

Nanotubes and 

Nanoribbons 

E.Erdogan, TU Dresden, Dresden, 

Germany; G.Seifert, TU Dresden, 


Prolonged and increased 

coccolith production 

induced by media and 

process optimization 

N. Krumov, Karlsruhe Institute of 

Technology, Karlsruhe, Germany; C. 

Posten, Karlsruhe Institute of 

Technology, Karlsruhe, Germany 

Interface mobility as a 

probe for critical processes 

during diffusional phase 

transformation in low alloy 

steels 

S. van der Zwaag 

Delft University of Technology, 

Delft, the Netherlands 

17:30 

Influence of Mixing Speed 

during Melt Mixing of PCL 

and MWCNTs on 

Agglomerate Dispersion, 

Nanotube Length and 

Electrical Resistivity of 

P. Pötschke, T. Villmow, B. Krause, 

Leibniz-Institut für 

Polymerforschung Dresden e.V., 


Plasmonic Nanocomposites: 

from black absorber to 

transparent conductor 

Mady Elbahri,1,2*, Mehdi Keshavarz 

Hedayati,1, Mohamed Jamali1,1 

Ahnaf Usman Zillohu,2, V. 

Zaporojtchenko,3, T. Strunskus,3, 

F. Faupel,3 

1) Christian-Albrechts University at 

Nanoscale metal-molecule 

contacts 

S. Berger, S. Gemming, A. Erbe, 


Dresden-Rossendorf, Dresden, 

Germany; E. Erdogan, G. Seifert, TU 

Dresden, Dresden, Germany. 

Biomineralization studies in 

vivo 

M.-L. Lemloh, Biological Institute, 

Zoology, University of Stuttgart, 

70569 Stuttgart, Germany; 

Z. Burghard, Institute for Materials 

Science, University of Stuttgart, 

70569 Stuttgart, Germany et al. 


Properties of Ultra-fast 

Annealed HSLA Steel 

R.H. Petrov, Gent University, Dept. of 

Materials Science and Engineering, 

Technologiepark 903, Gent, 

Belgium and Delft University of 

Technolgy, Department of Materials 

Scienice and Engineering, Mekelweg 

17:45 

Structural control of 

Polyamide/EVOH 

nanomembrane 

N.Haddadpour,chemistry 

faculty,Amirkabir University of 

Technology,Tehran,Iran 

Z. Ahmadi,Color and Polymer 

Research center, Amirkabir University 

of Technology,Tehran,Iran 

Broad metal-insulator 

transition and wide range 

magnetoresistance in 

La0.7Sr0.3MnO3 

nanomaterials 

Hilal Ahmad Reshi*, Shreeja Pillai, 

Deepika Bhuwal, Rashmi Yadav and 

Vilas Shelke 

Novel Materials Research Laboratory, 

Department of Physics, Barkatullah 

University Bhopal-462026 INDIA 


Poster 1: F3-1006 


Poster 3: F3-1004 


Deformation Mechanisms in 

Nanocrystalline Metals: 

Experiments and Atomistic 

Simulations 

H. Van Swygenhoven, Materials 

Science and Simulations, Paul 

Scherrer Institut, CH-5232 Villigen, 

Switzerland 

18:00 


35

am 

Thursday 

Symposium: A3 

Symposium: A1 

Symposium: B2 

Symposium: B4 

Symposium: B6 








High-Temperature 


Advanced Steels for 

Structural and Functional 

Applications 




Multiferroics I 

Synthesis and coatings 

Advanced Steels for Structural and 

Functional Applications I 

Superalloys 

Joining Technologies 

E. Quandt, 



H. Fritze, Technische Universität 

Clausthal, Goslar (Germany) 

H. Biermann, TU Bergakademie 

Freiberg (Germany) 

M. Krüger, 

Otto-von-Guericke-Universität 

Magdeburg (Germany) 

A. Herrmann, Faserinstitut Bremen 

e.V. (Germany) 

09:15 


Unusual Multiferroics 

Manfred Wuttig1 and Shenqiang 

Ren2 

1University of Maryland, College 

Park, MD; 2 University of Kansas, 

Lawrence, KS, USA 


PARTICOAT – High Temperature 

Multifunction 

Coatings Produced in one 

Procedure from micro-sized 

Spherical Alum. Particles 

V. Kolarik, R. Roussel, M. 

Juez-Lorenzo, V. Kuchenreuther, 

Fraunhofer Institute for Chemical 

Technology ICT, Pfinztal, Germany 


Modelling the orientation 

dependency of twin 

substructure evolution in 

high-Manganese TWIP steel 

F. Roters, I. Gutierrez-Urrutia, D. 

Raabe, Max-Planck-Institut für 

Eisenforschung, Max-Planck-Str. 1, 

40237 Düsseldorf, Germany 

Microstructural Study of the 

Intergranular Precipitation in 

ATI 718Plus Superalloy 

M.Revaud, Centre des Matériaux - 

MINES ParisTech- CNRS UMR 7633, 

Évry, France & Snecma Villaroche, 

77550 Moisy-Cramayel, France ; 

L.Nazé, Centre des Matériaux, 

MINES ParisTech, CNRS UMR 7633, 

Reactive Nanometer 

Multilayers as Tailored Heat 

Sources for Joining 

Techniques 

G. Dietrich, M. Rühl, E. Pflug, S. 

Braun, A. Leson 

IWS Dresden, Fraunhofer Institute for 

Material and Beam Technology, 

Winterbergstraße 28, 

09:30 

Production of 

High-Manganese Steel Strips 

by Laboratory Scale Strip 

Casting and an Adapted 

Hot Forming Route 

M. Daamen, Institute of Metal 

Forming (IBF), RWTH Aachen, 

Aachen, Germany; B. Wietbrock, 

Institute of Metal Forming (IBF), 

RWTH Aachen, Aachen, Germany; G. 

Hirt, Institute of Metal Forming 

Effect of microstructure on 

the cyclic behaviour of a 

powder metallurgy 

nickel-base superalloy 

A. Dumont, MINES ParisTech Centre 

des Matériaux CNRS UMR 7633, 

Evry and SNECMA Villaroche, 

Moissy-Cramayel, France; L. Nazé, 

MINES ParisTech Centre des 

Matériaux CNRS UMR 7633, Evry, 

Analysis of Potentials and 

Limits for the Application of 

Reactive Nanometer 

Multilayer Foils for Brazing 

E. Hofmann (1), J. Zähr (3) , U. 

Füssel (1), G. Dietrich (2), M. Rühl 

(2), E. Beyer (2) 1 TU Dresden, 

Institute of Surface and 

Manufacturing Technology, Chair of 

Joining Technology and Assembly 

09:45 

Multiferroic 

CoFe2O4/BaTiO3 core-shell 

composites 

V. V. Shvartsman, M. Etier, D. C. 

Lupascu; University Duisburg-Essen, 

Essen, Germany 

Generation of functional 

surface on Gamma-TiAl via 

the fluorine effect for 

high-temperature 

applications 

R. Pflumm, Dechema 

Forschungsinstitut, Frankfurt am 

Main, Germany 

M.Schütze, Dechema 

Forschungsinstitut, Frankfurt am 

Main, Germany 

TRIP - TWIP transition in 

highly alloyed CrMnNi 

austenitic steel 

S. Martin, D. Borisova, U. Martin, D. 

Rafaja, TU Bergakademie Freiberg, 

Institut für Werkstoffwissenschaft; S. 

Wolf, L. Krüger , TU Bergakademie 

Freiberg, Institut für 

Werkstofftechnik 

Investigation of planar 

biaxial low cycle fatigue 

behavior of the nickel-base 

superalloy Waspaloy at 

elevated temperature 

D. Kulawinski, Institut of Materials 


Freiberg, Gustav-Zeunerstraße 5, 

09599 Freiberg, Germany et al. 

Manufacturing and analysis 

of loop connections for 


W. Hufenbach, R. Kupfer, M. Pohl, 

H. Boehm, Technische Universität 

Dresden, Institut für Leichtbau und 


10:00 

magnetoelectric properties of 

0-3 composites multiferroics 

M. Rafique, S. Qamar ul Hassan, 

M.S. Awan, S. Manzoor 

COMSATS Institute of Information 

Technology, Islamabad, Pakistan 

An Advanced PM 

Nickel-Base Superalloy for 

Production of Discs for New 

Generation Gas-Turbine 

Engines 

A.M. Volkov, G.S. Garibov, N.M. 

Grits, A.V. Vostrikov 

All-Russia Institute of Light Alloys 

Stock Co., Moscow, Russia 

Strain rate effects on the 

mechanical behaviour and 

modelling of flow stress of 

high alloyed austenitic cast 

CrMnNi-TRIP steel 

S. Wolf, S. Martin, L. Krüger, U. 

Martin, Institute of Materials 

Engineering, Institute of Materials 



Germany 

Effect of Stress on the 

Microstructural Stability of a 

Third Generation Ni-based 

Single Crystal Superalloy 

DD10 

J.Y. Chen, Science and Technology 

on Advanced High Temperature 

Structural Materials Laboratory, 

Beijing Institute of Aeronautical 

Materials, Beijing, China et al. 

Influence of Textile Process 

Parameters on Integral 

CFRP-Aluminium Joints 

A. Lang, FIBRE Faserinstitut Bremen 

e.V., Bremen, Germany; P. Schiebel, 

FIBRE Faserinstitut Bremen e.V., 

Bremen, Germany; A. S. Herrmann, 

FIBRE Faserinstitut Bremen e.V., 

Bremen, Germany 

10:15 

Strain dependent 

magnetoelectric properties of 

heteroepitaxial 

CFO/PZT/SRO composite 

on PMN-PT substrates 

Adrian Petraru, Neele Hoeft, Soni 

Rohit,Hermann Kohlstedt 

Nanoelektronik, Technische 

Fakultät, 


Kiel, Kiel, 24143, Germany; 

New Material and 

Processing Concept for 

Si3N4 Ceramics 

P. Pontiller, University of Bayreuth, 

Bayreuth, Germany; Z. Negahdari, 


Germany; M. Willert-Porada, 


Germany; 

Correlation between 

Microstructure and Texture 

Evolution in an Austenitic 

Fe-28Mn-0.3C TWIP Steel 

during Cold-Rolling 

C. Haase, RWTH Aachen University, 

Aachen, Germany; 

S.G. Chowdhury, National 

Metallurgical Laboratory, 

Jamshedpur, India; 

L.A. Barrales Mora, RWTH Aachen 

Thickness dependency of 

nickel-base superalloy 

properties 

R. Völkl, University Bayreuth, 

Bayreuth, Germany; M. Brunner, 

University Bayreuth, Bayreuth, 

Germany; M. Bensch, University 

Bayreuth, Bayreuth, Germany; E. 

Affeldt, MTU Aero Engines, Munich, 

Recent developments for 

laser beam brazing of 

CFRP-aluminium structures 

V. Wottschel, P. Woizeschke, BIAS - 

Bremer Institut für angewandte 

Strahltechnik GmbH, 28359 Bremen, 

Germany 

10:30 

Fully Integrable Magnetic 

Field Sensor Based on 

Delta-E Effect 

B. Gojdka, R. Jahns, K. Meurisch, H. 

Greve, Kiel University, R. Adelung, 

R. Knöchel, E. Quandt, F. Faupel, 

Germany; Kiel University, Kiel, 

Germany 



Poster 2: A1-1095 






Creep strength and 

microstructure of Gamma’- 

strengthened Cobalt-base 

superalloys 

S. Neumeier, Department of Materials 

Science & Engineering, Institute I: 

General Materials 

Properties,University 

Erlangen-Nürnberg, 91058 Erlangen, 


Novel Joining Technique for 

Carbon Fibre Reinforced 

Polymer and Titanium 

S. Lolou, S. Riekehr, V. Ventzke, M. 

Horstmann, D. Schnubel, N. 

Kashaev, N. Huber, 


Institute for Materials Research, 

Materials Mechanics, Geesthacht, 

36 


Symposium: C1 



Composites 

metals/ceramics 

R. Gadow, Universität Stuttgart 

(Germany) 

Nanostructure, Properties 

and Applications of 

Polymer-Derived Ceramics 

–– Recent Developments 

G. Mera, TU Darmstadt, Germany;Y. 

Gao, TU Darmstadt, Germany; K. 

Morita, TU Darmstadt, Germany, H.-J. 

Kleebe, TU Darmstadt, Germany; R. 

Riedel, TU Darmstadt, Germany 

Symposium: C2 


Materials for Additive 


Materials for lithography based AMT 

J. Stampfl, Technische Universität 

Wien (Austria) 


Processing of Biomaterials 

A. Lendlein, Centre for Biomaterial 

Development, Berlin-Brandenburg 

Centre for Regenerative Therapies 

(BCRT), Institute of Polymer 

Research, Hhz- Geesthacht, Teltow, 

University of Potsdam, Germany 

Symposium: D2 


Advanced Mechanical 




T. Niendorf, Universität Paderborn 

(Germany) 

A Remnant Life Assessment 

Procedure for High 

Temperature Applications 

Rishi Pillai(a), Helen Ackermann(a), 

Dr.-Ing. Klaus Lucka(a), 

Silvia Schmitt(b), Dr.-Ing. Alfred 

Scholz(b), 

a: Oel Waerme Institut, GmbH, 

Herzogenrath, An-Institut der RWTH 

Symposium: F5 


Materials for 

Bone-Tissue-Regeneration 


Bone-Tissue-Regeneration I 

C. Heiß, Universitätsklinikum 

Giessen und Marburg GmbH, Gießen 

(Germany) 

Retarded Local Release of 

Bone Therapeutic Drugs 

from Biorelated 

Polyelectrolyte Complex 

Particles 

M. Müller (Sp), B. Torger, B. Keßler, 

D. Appelhans, Leibniz Institute of 

Polymer Research Dresden 

(Germany); B. Woltmann, U. 

Hempel, TU Dresden (Germany); R. 

Schwartz-Albiez, Deutsches 

Thursday 

Symposium: Y1 







A. Rollett, Carnegie Mellon 

University, Pittsburgh (USA) 


Constitutive Modelling: 

Time-Proven Recipes and 

New Results 

Y. Estrin, Centre for Advanced Hybrid 

Materials, Department of Materials 

Engineering, Monash University, 


am 

09:15 

Optimization of a 

quadrilayer system for 

enhancing the selective 

absorption of visible and 

NIR radiation 

L. Gaouyat, Solid State Physics 

Laboratory, Facultés Universitaires 

Notre-Dame de la Paix, Namur, 

Belgium; F. Mirabella, CRM Group – 

AC&CS, Liege, Belgium et al. 

Fabrication of elastic 3D 

scaffolds by two-photon 

polymerization 

A. Ovsianikov(1,3), S. 

Nürnberger(2), J. Torgersen(1), Z. 

Li(3), H. Redl(4), R. Liska(3), J. 

Stampfl(1) 1.TU Wien, AUSTRIA 

2.Medical University of Vienna, 

AUSTRIA; 3.Inst. of Applied 

Characterisation of 

deformation 

inhomogeneities in Al-based 

MMCs by mechanical 

spectroscopy 

H.-R. Sinning, J. Bernhardt TU 


Deutschland 

Quantitative studies of 

metabolism 

(F-18-deoxyglucose) and 

bone metabolism 

(F-18-fluoride) with positron 

emission tomography (PET) 

Ludwig G. Strauss,, German Cancer 

Research Center 

Antonia Dimitrakopoulou-Strauss, 

German Cancer Research Center 

Hartmut Goldschmidt,, Univ. 

Medical Clinic V and National Center 

09:30 

Nanostructured Alumina 

Ceramics Produced by 

Pulsed Electric Current 

Sintering 

M. Nanko, Nagaoka University of 

Technology, Nagaoka, Japan; K. Q. 

Dan, Hanoi University of 

Technology, Hanoi, Vietnam and D. 

Maruoka, Nagaoka University of 


Laser 3D 

micro/nanostructuring of 

polymers: mechanisms and 

applications 

Mangirdas Malinauskas, Domas 

Paipulas, Albertas ukauskas, 

Paulius Danilevičius, Gabija 

Bičkauskait&#279 et al. 

Tomographic in-situ creep 

investigations of light metal 

MMCs with synchrotron 

radiation 

B. Camin, TU Berlin, Metallische 

Werkstoffe, Berlin 

M. Huppmann, TU Berlin, 

Metallische Werkstoffe, Berlin 

W. Reimers, TU Berlin, Metallische 

Werkstoffe, Berlin 

Diagnostic value of funct. 

magnetic resonance 

imaging for differentiation of 

benign osteoporosis and 

multiple myeloma 

M. Sumkauskaite, DKFZ, Heidelberg, 

Germany, J. Hillengass MD, 

University of Heidelberg, Heidelberg, 

Germany, C. Heiss, DKFZ, 

Heidelberg, Germany, M. Dornisch 

MD, University of Heidelberg, 


Plastic Anisotropy in 

Magnesium Alloys – 

Phenomena and Modelling 

W.B. Hutchinson , Swerea-KIMAB 

(Swedish Corrosion and Metals 

Research Institute), Stockholm, 

SWEDEN; M. R. Barnett, Centre for 

Materials and Fibre Innovation, ITRI, 

Deakin University, Geelong, 

09:45 

Novel Sandwich Structures 

for Thermal Insulation with 

Electrical Functionality 

C. Dreyer, K. Wiebe, M. Bauer, 

Fraunhofer Research Institution for 

Polymeric Materials and Composites 

PYCO, Kantstr. 55, 14513 Teltow, 


Micro-stereolithography of 

Silicon Carbide components 

Mark Vaes, TNO, Eindhove, The 

Netherlands; Bart v/d Vorst, TNO, 

Eindhoven, The Netherlands, Tessa 

ten Cate, TNO, Eindhoven, The 

Netherlands 

X-Ray Nanodiffraction at 

MINAXS of PETRA III - Status 

and Applications for 

Materials Science 

C. Krywka, Universität Kiel, Kiel, 

Germany; 

J. Keckes, Montanuniversität 

Leoben, Leoben, Austria; 

A. Buffet, DESY, Hamburg, Germany; 

S. Roth, DESY, Hamburg, Germany; 

Genetic regulation of bones 

cells upon increased 

magnesium salt 

concentrations 

A. Burmester, Helmholtz-Zentrum 


F. Feyerabend, Helmholtz-Zentrum 


B. Luthringer, Helmholtz-Zentrum 


10:00 

High Temperature Oxidation 

Behaviour of NiZrY Powder 

and Bulk Material 

L. Fuhrmann, University Bayreuth, 

Bayreuth, Germany; R. Völkl, 

University Bayreuth, Bayreuth, 

Germany; U. Glatzel, University 

Bayreuth, Bayreuth, Germany 

Generation of ceramic parts 

via lithography-based AMT 

S. Gruber, Vienna University of 

Technology, Vienna, Austria; R. 

Felzmann, Vienna University of 

Technology, Vienna, Austria; G. 

Mitteramskogler, Vienna University 

of Technology, Vienna, Austria et al. 

Exhaustive thin film and 

interface characterization by 

combined neutron and 

X-ray reflectivity 

P. Gutfreund, Institut Laue-Langevin, 

Grenoble, France 

M. Wolff, Uppsala University, 

Uppsala, Sweden 

Bortezomib releasing bone 

substitute materials targeting 

osteolytic bone disease in 

multiple myeloma by 

normalizing altered bone 

remodeling and local tumor 

D. Hose, Medizinische Klinik V, 

Universitätsklinikum Heidelberg, 

Heidelberg, Germany; S. Heinemann, 

Max Bergmann Center of 

Biomaterials and Institute for 

Materials Science, Technische 



AZ61Mg Alloy 

Multi-Directionally Forged at 

Room Temperature 

H. Miura (Sp), T. Maruoka, The 

University of 

Electro-Communications, Chofu 

(Japan); J.J. Jonas, McGill 

University, Quebec (Canada) 

10:15 

Preparation and 

characterization of nanostr. 

Ni5TiO7/TiO2/Ti composite 

material for biomass 

gasification 

C. Weimer, L. Zhang, X. Jiang, T. 

Staedler, University of Siegen, 

Siegen, Germany 

3D screen printing as 

method for mass 

production 

T. Studnitzky, Fraunhofer IFAM 


A. Strauß, Fraunhofer IFAM Dresden, 


M. Jurisch, Fraunhofer IFAM 











Dynamic Recrystallization in 

Magnesium Single Crystals 

T. Al-Samman, K.D. Molodov, D.A. 

Molodov, G. Gottstein, RWTH 

Aachen University, Aachen, Germany 

10:30 


37

am 

Thursday 

Symposium: A3 

Symposium: A1 

Symposium: B2 

Symposium: B4 

Symposium: B6 








High-Temperature 




Applications 




Thin Film Magnetoelectrics 

Characterization and operation 


Functional Applications II 

Beyond Superalloys 

Modelling and Design 

M. Wuttig, University of Maryland, 

Pennsylvania (USA) 

V. Kolarik, Fraunhofer-Institut für 

Chemische Technologie, Pfinztal 

(Berghausen) (Germany) 

W. Bleck, RWTH Aachen (Germany) 

T. Halle, Technische Universität 


M. Kästner, TU Dresden (Germany) 

11:15 

Magnetoelectric thin film 

sensor for biomagnetic 

sensing 

D. Meyners, E. Lage, C. Kirchhof, R. 

Jahns, H. Runkowske, R. Knöchel, 

E. Quandt, 


Kiel, Kiel, Germany 


High-temperature dielectrics 

with an extremely large 

temperature stability in 

Bi1/2Na1/2TiO3-based 

lead-free ceramics 

M. Acosta, Technische Universität 


J. Zang, Technische Universität 


W. Jo, Technische Universität 



Self-healing of damage in 

steels by aging precipitation 

S. Zhang1, N.H. van Dijk1, G. 

Langelaan1, H. Schut1, E. Brück1 

and S. van der Zwaag2 

1) Faculty of Applied Sciences, Delft 


Mekelweg 15, 2629JB Delft, The 

Mo-Si-B alloys processed 

by directional solidification 

M. Krüger, Otto-von-Guericke- 

University, Magdeburg, Germany; G. 

Hasemann, 

Otto-von-Guericke-University, 

Magdeburg, Germany; M. Heilmaier, 

Karlsruher Institut für Technologie, 

Analytical and numerical 

residual stress models for 

fibre metal laminates – 

comparison and application 

Joachim Hausmann, Parya 

Naghipour, Karola Schulze, DLR - 

German Aerospace Center, Köln, 

Germany 

11:30 

Bias Field Integration in 

Magnetoelectric Composites 

by Exchange Bias 

E. Lage, D. Meyners, C. Kirchhof, E. 

Quandt, 


Kiel, Kiel, Germany 

Fabrication of 

Near-Net-Shape Jet Vanes 

Via Powder Injection 

Molding of Refractory 

Metals 

S.T. Lim, Agency for Defence 

Development, Daejon, South Korea 

Thermodynamics Based 

Calculation of Stacking Fault 

Energies in High-Mn Steels 

Bengt Hallstedt, RWTH Aachen 

University, Aachen, Germany 

Beyond Ni-Base 

Superalloys: The Influence of 

the Zirconia Content on 

Microstructure and Creep 

Properties of MoSiB-Alloys 

C. Hochmuth, University Bayreuth, 

Bayreuth, Germany; D. Schliephake, 


Karlsruhe, Germany; M. Heilmaier, 



Modeling of fracture 

behavior of hybrid transition 

structures 

V. Bitykov, BIME - University of 

Bremen, Am Biologischen Garten 2, 

28359 Bremen, Germany; 

F.Jablonski, University of Applied 

Sciences Bremen - Faculty 5, 

Neustadtswall 30, 28199 Bremen, 

11:45 

Modulated magnetoelectric 

thin film sensors 

R. Jahns, H. Runkowske, S. 

Marauska, D. Meyners, E. Lage, B. 

Wagner, E. Quandt, R. Knöchel: 

University of Kiel, Kiel, Germany 

Space-resolved High 

Precision Displacem. 

Measurement for Piezoelectric 

Devices at High 

Temp. Using a Laser 

Doppler Interferometer 

S. Schmidtchen, D. Richter, H. Fritze, 


Goslar, Germany 

Investigations of mechanical 

and transformation 

Behaviour of austenitic 

CrMnNi Steel regarding the 

heterogeneous as-cast State 

A. Kovalev, Institute of Iron and 

Steel Technology, TU Bergakademie 

Freiberg, D-09596 Freiberg/Saxony, 

Germany; T. Kutschke, Institute of 

Iron and Steel Technology, TU 

Bergakademie Freiberg, D-09596 

Microstructure and Creep 

Behavior at 1100°C of a 

Co-Re-Cr-C alloy 

T. Depka, Ruhr-Universität Bochum, 

Bochum, Germany; Ch. Somsen, 

Ruhr-Universität Bochum, Bochum, 

Germany; D. Mukherji, Technische 


Braunschweig, Germany et al. 

Design and Modelling of 

Polytetrafluoroethylene 

Hybrid Structures for 

Piezoelectric Applications 

S.Zhukov and H. von Seggern 

:Institut für Materialwissenschaft, TU 

Darmstadt, Petersenstr. 32, 64287 


S. Fedosov :Department of Physics 

and Materials Science, Odessa 

12:00 

MEMS magnetic field sensor 

based on magnetoelectric 

composites 

Stephan Marauska, Fraunhofer 

Institute for Silicon Technology 

ISIT, Itzehoe, Germany; Christine 

Kirchhof, Institute for Materials 

Science, Christian-Albrechts- 

Universität, Kiel, Germany et al. 

Zirconia-Based Oxygen 

Pump and Sensor for 

Highly Precise Oxygen 

Partial Pressure Control 

M. Schulz, Clausthal University of 

Technology, Goslar, Germany; H. 

Fritze, Clausthal University of 

Technology, Goslar, Germany; Ch. 

Stenzel, Astrium – Space 

Transportation, Friedrichshafen, 

Dynamic Tensile Behavior of 

Twinning Induced Plasticity 

Steels 

T. Indendahl, Department of Ferrous 

Metallurgy, RWTH Aachen 

University, Aachen, Germany; A. 

Saeed-Akbari, Department of Ferrous 

Metallurgy, RWTH Aachen 

University, Aachen, Germany et al. 

Effect of different particle 

reinforcing phases on the 

Mechanical and Microstruc 

ture properties in relation to 

wear performance of silicon 

nitride composites 

Gurdial Blugan, Laboratory for High 

Performance Ceramics, Empa, Swiss 

Federal Laboratories for Materials 

Science and Technology, 


Jakob Kuebler, Laboratory for High 

Efficient multiscale modelling 

of hybrid structures 

Markus Kästner, TU Dresden, 


Sebastian Müller, TU Dresden, 


Volker Ulbricht, TU Dresden, 


12:15 

Magnetoelectric PZT-FeCoSiB 

thin film composites with 

IDT electrodes 

A. Piorra, Institute for Materials 

Science, Christian-Albrechts- 

Universität zu Kiel, Germany; R. 

Jahns, Institute for Electrical and 

Information Engineering, Christian- 

Albrechts-Universität zu Kiel, Kiel, 

Growth and characterization 

of high-temperature 

conducting MoSi2 thin films 

M. Baghaie Yazdi, TU-Darmstadt, 

Darmstadt, Germany; M. Fries, 

TU-Darmstadt, Darmstadt, Germany; 

L. Alff, TU-Darmstadt, Darmstadt, 

Germany 

Experimental investigations 

to quantify the austenitestabilizing 

effect of 

Manganese at High Alloyed 

Cr-Mn-Ni as-cast steels by 

stepped Chromium and 

M. Wendler,Institute of Iron and 

Steel Technology, TU Bergakademie 

Freiberg, Freiberg Germany; A. Weiß, 

Institute of Iron and Steel 

Technology, TU Bergakademie 


Evaluation of Ultra High 

Temperature Ceramics and 

Coating-Systems for their 

Application in Rocket 

Combustion Chambers 

K. Bubenheim, C. Wilhelmi, D. 

Jonke, M. Englhart, EADS 

Innovation Works, Munich, 

Germany 

S. Beyer, ASTRIUM Space 

Transportation, Ottobrunn, Germany 

A new tool for the 

preliminary design of 

notched multilayered 

GF/PP-composites with 

cut-outs and a finite outer 

boundary 

Prof. Dr.-Ing. habil. Prof. E. h. Dr. h. 

c. Werner A. Hufenbach, Dr.-Ing. 

Bernd Grüber, Dipl.-Ing Robert 

Gottwald, Dr.-Ing. Martin Lepper, 

Dr.-Ing. Binquan Zhou, TU Dresden, 

Germany 

12:30 

Interface Strain Profile of 

Complex Magnetoelectric 

Composite Systems by 

X-ray Diffraction Methods 

B. M. Murphy, M. Abes, C. T. 

Koops, S. Hrkac, O. M. Magnussen 

Institute for Experimental and 

Applied Physics, Christian-Albrechts- 

University, Kiel, Germany 

E. Woltermann, H. Greve, E. Quandt, 








Mechanical behavior of 

spark plasma sintered 

Si-based precursor derived 

ceramics 

R. Sujith, N. Srinivasan, R. Kumar, 

Indian Institute of Technology 

Madras, Chennai, India 

Methods for modelling and 

analyzing process chains 

support the development of 

new technologies. 

Knut Großmann, Hajo Wiemer, Kay 

K. Großmann, Technische 

Universität Dresden, Germany 

38 


Thursday 

am 

Symposium: C1 



Composites 

polymers/hybrids 



(Germany) 

Thermal Conductivity of 

Nanoparticle Enriched 

Polymers 

Miriana Vadalá, University of 

Duisburg-Essen, Institute for 

Materials Science, Essen, Germany; 

Doru C. Lupascu, University of 

Duisburg-Essen, Institute for 

Materials Science, Essen, Germany 

Symposium: C2 




Powder based AMT processes 

B. Baufeld, Katholieke Universiteit 

Leuven (Belgium) 

Rationalising the 

Microstructural Development 

using Thermal Process 

Modelling of Direct Laser 

Fabrication of Ti-6Al-4V 

K. McDonald, Advanced Technology 

Centre, BAE Systems, Bristol, UK; 

R.M. Ward, School of Metallurgy 

and Materials, University of 

Birmingham, Birmingham, UK et al. 

Symposium: D2 






K.B. Yeap, Fraunhofer-Institut für 

Zerstörungsfreie Prüfverfahren, 


Strain and Structural 

Relaxation in Thin 

Nano-Crystalline Platinum 

Films 

W. Gruber,Technische Universität 

Clausthal, Clausthal-Zellerfeld, 

Germany;C. Baehtz,Helmholtz 

Zentrum Dresden Rossendorf, 

Dresden, Germany;, C. 

Kübel,Karlsruher Institut für 

Symposium: F5 





Bone-Tissue-Regeneration II 

V. Alt, Universitätsklinikum Gießen 

und Marburg (Germany) 

Time of Flight –Secondary 

Ion Mass Spectrometry: 

Investigation and 

quantification of the mineral 

content of osteoporotic bone 

A. Henß,Institute of Physical 

Chemistry, Justus-Liebig-University 

Gießen, Heinrich-Buff-Ring 58, 

35392 Gießen, Germany et al. 

Symposium: Y1 







W. Skrotzki, Technische Universität 



Crystallographic textures, a 

magnifying glass to 

investigate materials 

J. Hirsch, Hydro Aluminium Rolled 

Products GmbH, Bonn (Germany) 

11:15 

Tuning the agglomerate 

morphologies of 

nanoparticles: from 

amorphous fibrils to 

compact supercrystals 

Philip Born, INM - Leibniz Institute 

for New Materials, Saarbrücken, 

Germany; Tihamer Geyer, Saarland 

University, Saarbrücken, Germany; 

Tobias Kraus, INM - Leibniz Institute 

for New Materials, Saarbrücken, 

Novell Cellular Materials by 

Selective Electron Beam 

Melting 

J. Schwerdtfeger, University of 


Germany, F. Schury, University of 


Germany, Y. Liebold Ribeiro, 

University of Erlangen-Nürnberg, 

The catalytic effect of Fe and 

Cr on hydrogen and 

deuterium absorption in Mg 

thin films 

H. Fritzsche, Canadian Neutron Beam 

Centre, NRC, Chalk River, Canada 

P. Kalisvaart, University of Alberta 

and National Institute for 

Nanotechnology, NRC, Edmonton, 

Canada et al. 

Change of Microscopic 

Elastic Properties of Vertebrae 

of Rats Due to 

Ovariectomy and Special 

Diet: Finite Element Analyses 

and Bone Growth 

R. Müller, Institut f ur 

Werkstoffwissenschaft, TU Dresden, 

Dresden, Germany; E. Gerber, Institut 

für Werkstoffwissenschaft, TU 

Dresden, Dresden, Germany et al. 

11:30 

Nanocomposites with 

Enhanced Mechanical 

Properties Through 

Chemically Optimized 

Particle-Polymer Interface 

T.A. Cheema, Technische Universität 


Germany; G. Garnweitner, 



Germany 

Enhancement of selective 

beam melting processes by 

process modelling on the 

powder scale 

C. Körner, A. Bauereiß, A. Klassen 

University of Erlangen-Nuremberg 

Martensstr. 5 

91058 Erlangen 

Cu2ZnSn(S,Se)4 Thin-Film 

Solar Cell Absorbers 

Prepared from Nanocrystal 

Inks: Impact of Ge 

Incorporation on the 

Chemical and Electronic 

J.H. Alsmeier, Solar Energy Research, 

Helmholtz-Zentrum Berlin für 

Materialien und Energie GmbH, 

Berlin, Germany; 

R.G. Wilks, Solar Energy Research, 

Helmholtz-Zentrum Berlin für 

A new metaphyseal fracture 

defect model in osteoporotic 

rats to study effects of 

biomaterials for the 

enhancement of fracture 

healing in osteoporotic 

Volker Alt, Ulrich Thormann, 

Seemun Ray, Daniel Lutz Dürselen, 

Katrin S. Lips, Christian Heiss, 

Marian Kampschulte, Sascha 

Heinemann, Alexander C. 

Langheinrich, Reinhard Schnettler 

Evolution of {111} 

Recrystallization Texture in 

Al-Mg-Si Alloy Sheets 

Fabricated by Symmetric/ 

Asymmetric Combination 

Rolling Process 

Hirofumi Inoue, Osaka Prefecture 

University, Sakai, Japan 

11:45 

Mesoporous tin-doped 

indium oxide (ITO) films: on 

the influence of 

nanostructure on 

electrochemical applications 

T. von Graberg, Justus-Liebig- 

University, Giessen, Germany; 

C. Seitz, Justus-Liebig- University, 

Giessen, Germany; 

B. M. Smarsly, Justus-Liebig- 

University, Giessen, Germany; 

On the microstructure – 

mechanical property – 

damage evolution 

relationships in lattice 

structures manufactured by 

selective laser melting 

T. Niendorf, University of 

Paderborn, Lehrstuhl für 

Werkstoffkunde,Paderborn, 

Germany; F. Brenne, Lehrstuhl für 

Werkstoffkunde (Materials Science), 

Paderborn, Germany et al. 

Correlation of electronic 

structure and transport 

properties in fuel cell and 

solar cell electrode layers 

probed operando with 

synchrotron spectroscopy 

A. Braun, Empa. Swiss Federal 

Laboratories for Materials Science 

and Technology, CH-8600 


Bone substitution materials 

regulate the mRNA 

expression of brain derived 

neurotrophic factor 

T. Lohmann, Laboratory for 

Experimental Trauma Surgery, 

Jusuts-Liebig-University, Giessen, 

Germany; I. Panzer, Laboratory for 


Justus-Liebig-University, Giessen, 

Mechanism of texture 

evolution during high 

temperature deformation of 

FCC and BCC solid solution 

alloys 

Y. Onuki, K. Okayasu and H. 

Fukutomi, Yokohama National 

University, Japan 

12:00 

Effect of Multi-Walled 

Carbon Nanotube Incorporation 

on Electrical and 


Polyaniline Based Compos. 

Asif Mahmood, School of Chemical 

and Materials Engineering (SCME), 

National University of Science and 

Technology (NUST), Sector H-12, 

Islamabad 44000, Pakistan et al. 

Oxidation behavior of Cu-Cr 

alloys built up by laser 

additive manufacturing 

D. Berndzen, Technische Universität 

Braunschweig, Institute for 

Materials, 38106 Braunschweig, 

Germany; 

J. Rösler, Technische Universität 

Braunschweig, Institute for 

Neutron imaging for the 

non-destructive 

characterisation of thin 

organic films 

D. Mannes, C. Grünzweig, A. 

Kaestner, E. Lehmann 

Neutron Imaging and Activation 

Group, Spallation neutron source 

SINQ, Paul Scherrer Institute (PSI), 

Modeling Processes of Self 

Healing Inspired by Bone 

Healing 

F. Repp, Department of Biomaterials, 

Max Planck Institute of Colloids and 

Interfaces, 14424 Potsdam, 

Germany; 

A. Vetter, Department of Biomaterials, 

Max Planck Institute of Colloids and 

Deformation mode and its 

implication on the evolution 

of microstructure and texture 

during high strain rate 

deformation of 

twinning-induced plasticity 

Tuhin Das, Supriya Bera1, Dept of 

Metallurgical and Materials Engg, 

NIT Durgapur, Durgapur, India; 

Kirsten Dahmen, Sascha Hoffmann, 

Wolfgang Bleck, IEHK, RWTH 

Aachen, Aachen, D52056 Germany et 

12:15 

Electrospun Nanofibrous 

Membrane for Water 

Filtration 

M. Elbahri, Christian-Albrechts 

University, Kiel (Germany), Seyed 

Shahin Homaeigohar, 

Helmholtz-Zentrum Geesthacht 

(Germany) 

Effects of nano-particles on 

the properties of laser 

cladded wear resistant 

layers of hot working tool 

steels 

S. Ocylok, Fraunhofer Institute for 

Lasertechnology, Aachen, Germany; 

A. Weisheit, Fraunhofer Institute for 

Lasertechnology, Aachen, Germany; 

I. Kelbassa, Chair for Laser 

Technology RWTH Aachen, Aachen, 









Distribution of Residual 

Deformation Effects and 

Texture Formation by 

Primary Recrystallization in 

Rolled BCC Metals 

Yu. Perlovich, M. Isaenkova, 

National Research Nuclear University 

"Moscow Engineering Physics 

Institute", Moscow, Russia 

12:30 


39

pm1 

Thursday 

Symposium: A3 




Symposium: A4 


Functional Nanoparticles 

Symposium: B2 




Applications 

Symposium: B8 


Hydrogen Embrittlement (HE) 

Symposium: B6 



15:00 

15:15 

Magnetic shape memory alloys: 

Fundamentals and thin films 

M. Kohl, Karlsruher Institut für 

Technologie, 


From (Germany) Fe-Pd-Cu materials 

libraries to epitaxial films, a 

study of successful 

development of novel 

ferromagnetic shape 

memory alloys 

Sven Hamann, Ruhr-Universität 

Bochum, 44780 Bochum, Germany; 

Sandra Kauffmann-Weiss, IFW 

Dresden, 01171 Dresden, Germany; 

Markus E. Gruner, University of 

Duisburg-Essen, 47048 Duisburg, 

TEM Investigations of 

Fe-Pd-X (X= Pt, Mn, Cu) 

Ferromagnetic Shape 

Memory Thin Films 

B. Erkartal, Synthesis and Real 

Structure, Institute for Material 

Science, Technical Faculty of CAU 

Kiel, Kaiserstraße 2. 24143, Kiel, 


Functional Nanoparticles 1 

W. Peukert, 


Erlangen-Nürnberg (DE) 


Critical Influence of Oxygen 

on the Formation of 

Titanium Nanoparticles for 

Deposition of Titania Thin 

Films from a Gas 

Aggregation Cluster Source 

F. Faupel, V. Zaporojtchenko, T. 

Peter, A. Ahadi, T. Strunskus, S. 

Zabel, Christian-Albrechts-University, 

Kiel, O. Polonskyi, H. Biederman, 

Charles University, Prague, Czech 

Republic 


Functional Applications III 

C. Krempaszky, Technische 

Universität München, Garching 

(Germany) 

Optimization of the 

Quenching and Partitioning 

Heat Treatment Cycle by 

Experimental Results- 

Influence on Microstructure 

and Properties 

D. De Knijf, Ghent University, 

Zwijnaarde (Ghent), Belgium, 

R. Petrov, TUDelft and Ghent 

University, Delft and Ghent, The 

Netherlands 

and Belgium; Cecilia Foyer, OCAS, 


cold-worked Fe-Ni-Co-Ti 

alloy with elastic anomaly 

T. Furuta, S. Kuramoto, N. 

Nagasako, T. Ohsuna, Toyota 

Central R&D Laboratories Inc, 

Nagakute, Aichi, 480-1192, Japan et 

al. 

Hydrogen embrittlement testing 

T. Michler, Adam Opel AG, 

Rüsselsheim (Germany) 

Hydrogen induced delayed 

fracture in hot rolled high 

manganese austenitic steel: 

the effect of Mn segregation 

and grain size 

Na Zan,School of Materials and 

Metallurgy, Northeastern University, 

Shenyang, P.R.China and 

Department of Ferrous Metallurgy, 

RWTH Aachen University, Aachen, 


Inhibition of Hydrogen 

Embrittlement of Heat 

Treated High Strength 

Carbon Steel by Nickel 

Electroplating 

Hiroto Yoshino, Kogakuin 

university, Tokyo, Japan; Yuji 

Kimura, Kogakuin university, 

Tokyo, Japan 


A. Lang, Faserinstitut Bremen e.V. 

(FIBRE) (Germany) 


Topologically Interlocked 

Polyurethane Structures 

A. Molotnikov, Centre for Advanced 

Hybrid Materials, Department of 

Materials Engineering, Monash 

University, Clayton, Australia et al. 

Effect of neighbouring plies 

and 3D-loop-threads on the 

fatigue life of glass fibre 

reinforced polypropylene 

M. Gude, W. A. Hufenbach, I. Koch, 

TU Dresden, Institut für Leichtbau 

und Kunststofftechnik, Dresden, 

Germany 

15:30 

Epitaxial Ni-Mn-Ga films 

and their prospect for 

application in microsystems 

A. Backen, IFW Dresden, Institute for 

Metallic Materials, P.O. Box 

270116, 01171 Dresden, Germany 

/ Dresden University of 

Technology, Institute of Materials 

Science, 01062 Dresden, Germany et 

Magnetic anisotropies in 

embedded ferromagnetic 

nanoparticles 

U. Herr, B. Kuerbanjiang, S. Saranu, 

U. Wiewald, P.Ziemann, Ulm 

University, Ulm, Germany 

Effects of Silicon Content on 



Hot-Dip Galvanized 

Complex-Phase Steel 

F. HAIRER, C. KREMPASZKY, 

Christian Doppler Laboratory of 

Material Mechanics of High 

Performance Alloys, Technische 

Universität München, Garching, 


Fatigue crack growth in 

precipitation-hardened 

martensitic stainless steel 

under high pressure 

gaseous hydrogen 

M. Arzaghi, Z. Sun, G. Benoit, G. 

Hénaff, C. Moriconi, D. Halm 

Pprime Institute, ISAE-ENSMA 

Futuroscope-Chasseneuil, France 

Early detection of Failure 

Locations in Fiber-Reinforced 

Plastics using Digital Image 

Correlation 

B.Gorny, Lehrstuhl für 

Werkstoffkunde (Materials Science), 

University of Paderborn, Pohlweg 

47-49, 33098 Paderborn, Germany 

et al. 

15:45 

Intermittent and Continuum 

Deformations in Epitaxial 

Ni-Mn-Ga Films 

Go Murasawa, Yamagata University, 

Yonezawa, Japan; Srinivasa R. 

Yeduru, Karlsruhe Institute of 

Technology; Anja Backen, IFW 

Dresden, Dresden, Germany; 

Sebastian Fähler, IFW Dresden, 

Single Molecule Magnet 

Mn12-Ph on Highly 

Oriented Pyrolytic Graphite 

K. Reaves, H. Zhao, K.R. Dunbar, H. 

Katzgraber: Texas A&M University, 

College Station, TX, USA; K. Kim, 

Y.G. Kim, K. Itaya, K. Iwaya, T. 

Hitosugi, W. Teizer: WPI-AIMR, 

Tohoku University, Sendai, Japan 

Designing Abrasion Resistant 

Steels Using Reported 

Correlations between Abrasion 

Resistance, Mechanical 

Properties and Microstru. in 

Advanced Steels 

Xiaojun Xu, Delft University of 

Technology, Delft, Netherlands; Wei 

Xu, Delft University of Technology, 

Delft, Netherlands, and ArcelorMittal 

Global R&D Gent, Zwijnaarde, 

Belgium et al. 

Development of lean-alloyed 

austenitic stainless steels 

resistant to hydrogen 

environment embrittlement 

Mauro Martin, Ruhr-Universität 

Bochum, Bochum, Germany; 

Sebastian Weber, Helmholtz-Zentrum 

Berlin, Berlin, Germany; Werner 

Theisen, Ruhr-Universität Bochum, 


Failure behavior of diffusion 

bonded transition structures 

for integral FRP-Aluminium 

compunds 

K. Schimanski, A. von Hehl, J. 

Schumacher, H. Bomas, H.-W. Zoch 

,Stiftung Institut für 


16:00 

Understanding and 

modifying functional 

properties of magnetic 

Heusler alloys from first 

principles 

P. Entel, M. Siewert, M. E. Gruner, 

University of Duisburg-Essen, 



Poster 1: A4-1082 



Advanced high-strength 

steels for car-body 

manufacturing 

D. Firrao, G. Scavino, P. Matteis, 

Politecnico di Torino, Torino, Italy; 

M. De Sanctis, R. Valentini, G. F. 

Lovicu, A. Di Matteo, Università di 

Pisa, Pisa, Italy et al. 

Effect of microstructure on 

hydrogen environment 

embrittlement of AISI 304L 

austenitic stainless steel 

S. Weber, Helmholtz-Zentrum Berlin 

GmbH, Berlin, Germany 

M. Martin, Ruhr-Universität 

Bochum, Bochum, Germany 

W. Theisen, Ruhr-Universität 

Bochum, Bochum, Germany 

The stability of different 

titanium-PEEK interfaces 

against water 

K. Schulze, German Aerospace 

Center, Cologne, Germany; J. 

Hausmann, German Aerospace 

Center, Cologne, Germany; B. 

Wielage, Chemnitz University of 

Technology, Chemnitz, Germany 

16:15 

Influence of atomic order 

and magnetic field on the 

transformation entropy 

change in Ni-Mn-In alloy 

V.A. Chernenko,University of Basque 

Country (UPV/EHU)& Ikerbasque, 

Basque Foundation for Science, 

Bilbao, Spain; E. Cesari,Universitat 

de les Illes Balears, Palma de 

Mallorca, Spain et al. 





Novel Metal Hydrides at 

Truly Extreme Conditions 

T. Scheler, University of Edinburgh, 

UK; C. Guillaume, University of 

Edinburgh, UK; R. Howie, Uiversity 

of Edinburgh, UK; E. Gregoryanz, 

University of Edinburgh, UK 

Deformation and failure 

mechanisms of 

TRIP-steel/zirconia 

honeycombs depending on 

strain rate and temperature 

D. Ehinger, Institute of Materials 


Freiberg, Freiberg, Germany; L. 

Krüger, Institute of Materials 



40 


Thursday 

pm1 

Symposium: B9 


Light Weight Metallic Alloys 

Advanced light alloys 

Symposium: C3 


Joining 

Joining 1 

Symposium: C6 


Printed Electronics 

Printed Electronics 1 

Symposium: E3 


Multiscale Modelling of 


Theory and experiment 

Symposium: Y1 







W. Xie, Stolfig GmbH, Geisenfeld 

(Germany) 


Ti-0.1wt% VGCF Composite 

with TiO2 Reinforcement via 

Powder Metallurgy Process 

and Hot-extrusion 

Shufeng Li1, Bin Sun2, Takanori 

Mimoto2, Hisashi Imai1, Junko 

Umeda1, Katsuyoshi Kondoh1 

1Joining and Welding Research 

Institute, Osaka University, Japan 

2Graduate School of Mechanical 

G. Weber, Bundesanstalt für 

Materialforschung und -prüfung, 

Berlin (Germany) 

Transient Liquid Phase 

Brazing of Titanium Using 

Copper Filler Deposited by 

arc PVD Process 

A. Elrefaey, L. Wojarski (Sp), W. 

Tillmann, TU Dortmund University 

(Germany) 

E. Dörsam, Technische Universität 


J. Neugebauer, Max-Planck-Institut 

für Eisenforschung GmbH, 

Düsseldorf (Germany) 

J. Hirsch, Hydro Aluminium Rolled 

Products GmbH, Bonn (Germany) 

Keynote Lecture Highlight Lecture Keynote Lecture 

High-resolution printing of 

organic transistor circuits 

H. Sirringhaus, University of 

Cambridge (UK) 

Atomistic studies of defects 

in iron using magnetic 

bond-order potential 

M. Mrovec, Fraunhofer, IWM, 

Freiburg, Karlsruhe Institute of 


Z. Chen, Karlsruhe Institute of 


al. 

High angular EBSD and its 

materials applications 

C Maurice, R Quey and J H Driver, 

Ecole des Mines de Saint Etienne, 

France 

15:00 

Improvement of Tensile 

Properties of an Al-Si7Mg 

0.3 Aluminium Alloy by the 

Addition of Titanium 

Carbide Particulates 

P. Egizabal, M. Merchan, M. Garcia 

de Cortazar, J.C. Garcia, Fundacion 

Tecnalia Research and Innovation, 

Donostia-San Sebastian (Spain) 

Transient liquid phase 

bonding of YSZ to steel for 

high-temperature 

applications via PVDdeposited 

Cu-Zr-interlayers 

W. Tillmann,J. Pfeiffer, L. 

Wojarski,N. Sievers; 

TU-Dortmund,Dortmund, Germany 

J.E. Indacochea; University of 

Illinois, Chicago, USA 

Diffusion of hydrogen in 

strained Fe and Ni lattices 

D. Di Stefano, Fraunhofer IWM, 

Freiburg, Germany; J.-M. Albina, 

Tokyo University, Tokyo, Japan; M. 

Mrovec, Fraunhofer IWM, Freiburg, 

Germany; C. Elsaesser, Fraunhofer 

IWM, Freiburg, Germany 

15:15 

Microcellular Aluminium 

Integral Foams by Milled 

and Nanofunctionalized 

Blowing Agent Powders 

J. Hartmann; C. Körner, University of 


Germany 

Low temperature joining of 

alumina ceramics using 

Au-based solder alloys 

N. Weyrich, EMPA - Swiss Federal 


and Technology, Laboratory for 

Joining Technologies and 

Corrosion, Dübendorf, Switzerland 

et al. 

Towards Roll-to-Roll 

fabricated Organic Devices 

Paul Blom, TNO/Holst Centre, 

Eindhoven, NL 

Coupled grain boundary 

motion in a nanocrystalline 

grain boundary network 

M. Velasco, Paul Scherrer Institut, 

Villigen PSI, Switzerland; H. Van 

Swygenhoven, Paul Scherrer 

Institut, Villigen PSI, Switzerland; C. 

Brandl, Los Alamos National 

Laboratory, Los Alamos, U.S.A. 

Recent advances in the 

understanding of 

recrystallization 

Dorte Juul Jensen, Materials Science 

and Advanced Characterization, DTU 

Wind, Roskilde, Denmark 

15:30 

Microstructural 

Characterisation and 

Modelling of Oxygen 

Diffusion in Ti-5553 

C. Karl, The University of 

Birmingham, Birmingham, UK ; 

M.M. Attallah, The University of 

Birmingham, Birmingham, UK; M. 

Strangwood, The University of 

Birmingham, Birmingham, UK 

Laser droplet brazing for 

electrical contacting of 

composite materials with 

integrated active elements 

C. Pfeiffer, Bayerisches Laserzentrum 

GmbH, Konrad-Zuse-Straße 2-6, 

D-91052 Erlangen, Germany; M. 

Weigl, Bayerisches Laserzentrum 

GmbH, Konrad-Zuse-Straße 2-6, 

D-91052 Erlangen, Germany et al. 

15:45 / Influence of large 

scale coating techniques on 

interfaces and electronic 

properties of multilayer 

oleds 

K. Peters, P. Scharfer, W. Schabel, 

Institute of Thermal Process 

Engineering, Thin Film Technology, 


(KIT), Germany 

A multiscale study of the 

interaction of dislocations 

with crack tips 

Steffen Brinckmann, Dhiraj K. 

Mahajan, Alexander Hartmaier, 

Ruhr-Universität Bochum, Germany 

Nature and Anisotropy of 

Grain Boundary Failure in 

Archaeological Silver 

Artefacts 

P. Lejcek, Institute of Physics AS CR, 

Prague, Czech Republic; J. Drzd, 

Institute of Chemical Technology, 

Prague, Czech Republic; V. 

Gärtnerová, Institute of Physics AS 

CR, Prague, Czech Republic et al. 

15:45 

Effects of Size and Shape of 

Pure Titanium Powders on 

Tensile Behavior of Titanium 

Matrix Composites 

H. Izui, NIhon 

University,Funabashi,Japan; A.OTa, 

Nihon University, Funabashi, 

Japan;N. Kasai, Funabashi, Japan 

Effect of addition of Al & Ca 

and heat treatment on cast 

Mg-6Zn alloy 

S. S. Joshi, Indian Institute of 

Science, Bangalore, India; M.S. 

Mohan, Indian Institute of Science, 

Bangalore, India; S. Seshan, Indian 

Institute of Science, Bangalore, India 

et al. 

Experimental and Numerical 

Investigations on the Defect 

Assessment of Brazed Steel 

Joints 

A. Lis, Empa – Swiss Federal 


and Technology, Duebendorf, 

Switzerland; M. Koster, Empa – 

Swiss Federal Laboratories for 







16:00 / Full color 

electrochromic signage 

displays 

T. Mustonen, BASF Schweiz AG, 

Basel, Switzerland; J. Remmele, 

University of Stuttgart 

16:15 / An Experimentally 

Based Assessment of Crack 

Formation in Printed 

Electronic Structures Using a 

Hybrid Fracture Criterion 

R. Dieringer, W. Becker, D. Spiehl, E. 

Dörsam, TU Darmstadt, Darmstadt, 

Germany; 

16:30 / Printing of 

TCO-nanoparticles for the 

application in FETs 

D. Jakobsen, N. Koelpin, A. Roosen; 

University of Erlangen-Nuremberg, 

Materials Science, Glass and 

Ceramics 

Effect of strain gradients in 

the deformation behavior of 

multiphase steels 

Satyapriya Gupta, Anxin Ma, 

Alexander Hartmaier 

Interdisciplinary Centre for Advance 

Materials Simulation, 

Ruhr-Universitaet Bochum, 44801 


Experimental analysis and 

modeling of the anisotropic 

response of titanium alloy 

Ti-X for quasi-static loading 

at room temperature 

M. Tritschler, Fraunhofer Institute for 

Mechanics of Materials IWM, 

Freiburg, Germany; A. Butz, 


Materials IWM, Freiburg, Germany et 

al. 

Local investigation of grain 

boundary-dislocation 

interaction via bicrystalline 

micropillars 

N. Kheradmand, Saarland University, 

Saarbrücken, Germany; Afrooz 

Barnoush, Saarland University, 

Saarbrücken, Germany; Mao Wen, 

Shanghai Jiao Tong University, 

Shanghai, China et al. 

closing address of the 

honorary symposium 

16:00 

16:15 


41

pm2 

Thursday 

Symposium: A3 

Symposium: A4 

Symposium: B2 

Symposium: B8 

Symposium: G1 











Applications 


Materials Engineering in 

Australia 

17:00 

17:15 

Magnetocaloric Materials 

O. Gutfleisch, Technische Universität 



Shape-memory and caloric 

properties of magnetic 

Heusler alloys 

Antoni Planes, Lluís Mañosa, 

Departament d’Estructura i 

Constituents de la Matèria, 

Universitat de Barcelona, Catalonia; 

Mehmet Acet, Universität 

Duisburg-Essen, Duisburg, Germany 

Functional Nanoparticles 2 

T. Strunskus, 



Smart Core-shell Janus 

particles: Design, 

responsive properties and 

engineering of functional 

materials 

A. Synytska, Leibniz Institute of 

Polymer Research Dresden, Dresden, 

Germany; 

S. Berger,Leibniz Institute of 

Polymer Research Dresden, Dresden, 

Germany; 

Effects of Ordered 

Macroporous Structure on 

Their Eletrochromic 

Properties of 3DOM 

Tungsten Oxide Films 

Lili Yang, School of Transportation 

Science and Engineering, Harbin 

Institute of Technology, Harbin, 

150090, P.R. China et al. 


Functional Applications IV 

C. Schwarz, Technische Universität 

München, Garching (Germany) 

Design of Creep Resistant 

Steels via a Combined 

Artificial 

Intelligence-Thermodynamic 

s Approach 

Qi Lu, Delft University of 

Technology, Delft, The Netherlands, 

Wei Xu, Delft University of 

Technology, Delft, The Netherlands, 


University of Technology, The 

Adjustment of Heat 

Treatment Process to an 

Aluminium Alloyed Bearing 

Steel 

Holger Surm, Stiftung Institut für 

Werkstofftechnik, Bremen; 

Franz Hoffmann, Stiftung Institut für 

Werkstofftechnik, Bremen; 

Hans-Werner Zoch, Stiftung Institut 

für Werkstofftechnik, Bremen; 

Hydrogen embrittlement analysis 

and modelling 

T. Michler, Adam Opel AG, 

Rüsselsheim (Germany) 

Industrially-relevant 

multiscale modelling of 

hydrogen embrittlement 

N. Winzer, M. Mrovec, D. Di Stefano, 


Materials IWM, Freiburg, Germany; I. 

Katzarov, A. Paxton, Queen’s 

University Belfast, Belfast, UK 

Finite Element Modeling of 

Bending Test of Metallic 

Strips under Hydrogen 

H.T. Nguyen, Y. Charles, M 

Gaspérini 

LSPM-CNRS, université Paris 13, 99 

avenue Jean Baptiste Clément, 

F-93430 Villetaneuse, France 

Strucural materials 

Y. Estrin, Monash University, 

Melbourne (Australia) 


Advanced structural design 

and innovative processing 

of biocompatible beta 

Ti–Nb–based alloys 

J. Eckert, IFW Dresden, Dresden, 

Germany; L.C. Zhang, The University 

of Western Australia, Perth, Australia; 

T.B. Sercombe, The University of 

Western Australia, Perth, Australia et 

al. 

Phase transition and 

ordering behaviour in 

molybdenum containing 

titanium aluminides 

S. Mayer, Montanuniversitaet 

Leoben, Leoben, Austria; T. 

Schmoelzer, Montanuniversitaet 

Leoben, Leoben, Austria; S. Kabra, 

Australian Nuclear Science and 

Technology Organisation, Lucas 

17:30 

Ni-Mn-Sn-Co for potential 

use as 

temperature-monitoring 

sensor materials 

J. Liu, IFW Dresden, Dresden, 

Germany; O. Gutfleisch, IFW 

Dresden, Germany, and TU 

Darmstadt, Germany; B. Bergmair, 

SuessCo Kg, Vienna, Austria; D. 

Suess, SuessCo Kg, Vienna, Austria. 

3D investigation of 

nanoaditives in meltspun 

polymer fibres by 

tomographic imaging in 

TEM 

J. Wulfhorst, M. Heidelmann, 

T.Weirich, T. Gries, RWTH Aachen, 

Germany 

Phenomenological damage 

modeling approach for 

simulation of damage 

initiation in AHSS steels 

A. Fillafer, R. Wesenjak, B. Regener, 

C. Krempaszky, E. Werner, 

Technische Universität München, 

Germany 

Understanding Hydrogen 

Induced Degradation of 


Zr-Alloys Using a Multi- 

Scale Structural Mechanics 

Approach 

R. N. Singh, Bhabha Atomic 

Research Centre, Mumbai, India, P. 

Stahle, Lund University, Lund, 

Sweden, J. K. Chakravartty, Bhabha 

Atomic Research Centre, Mumbai, 

India, and S. Banerjee, Bhabha 

Formation of an ultrafine 

/nano-duplex structure 

facilitated by severe shear 

deformation in a Ti-20Mo 

beta titanium alloy 

W. Xu1, X. Wu1, D. P. Edwards2, M. 

Stoica3, J. Eckert3, 4 and K. Xia1 

1ARC Centre of Excellence for Design 

in Light Metals, Department of 

Mechanical Engineering, University 

17:45 

Hysteresis properties in 

Ni-Mn-based Heusler 

magnetic shape-memory 

alloys 

I. Titov, M. Acet, 

Experimentalphysik Universität 

Duisburg-Essen, D-47048 Duisburg, 

Germany 

A. Planes, L. Mañosa, D. 

Gonzalez-Alonso, Facultat de Fisica, 

Functionalized Iron-oxide 

Nanoparticles incorporated 

into Sol-gel based Inkjet Ink 

in Combination with Solvent 

Assisted Micro Molding 

B. Unterauer, Functional Surfaces and 


Steyr-Gleink, Austria; H. Leichtfried, 

Functional Surfaces and 


Steyr-Gleink, Austria et al. 

Al-Alloying of 18CrNiMo7-6 

for Increasing the Damage 

Tolerance of Gear 

Components 

M. D. Bambach, A. Stieben*, H. 

Dickert, W. Bleck 

RWTH Aachen, Germany 

Nanomechanical aspects of 

hydrogen embrittlement 

A. Barnoush, M. Zamanzade, H. 

Vehoff, Saarland University, 

Department of Materials Science, 


Severe Plastic Deformation 

Research at Monash 

University: Overview and 

New Results 

Rimma Lapovok and Yuri Estrin, 

Monash University, Melbourne, 

Australia 

18:00 


Mixed magnetism in 

transition-metal compounds 

E. Brück, N.H. Dung, Z.Q. Ou,1 L. 

Caron, L. Zhang, K.H.J. Buschow 

Fundamental Aspects of Materials 

and Energy, Faculty of Sciences, 

Delft University of Technology, Delft 

The Netherlands, R.A. de Groot, 

2BFUNTEX: Boosting 

cooperation betw research 

centres and industry to 

enhance rapid industrial 

uptake of innovative 

functional textile structures 

V. Dutschk, University of Twente, 

The Netherlands; B. McCarthy, 

TechniTex, UK; E. Van der Burght, 

Ghent University, Belgium; P. 

Kiekens, Ghent University, Belgium; 

A. Harlin, VTT, Finland et al. 

Design of novel steels with 

reduced density 

J. Schwabe, IEHK / RWTH-Aachen 

University, Germany; W. Bleck, IEHK 

RWTH-Aachen University, Germany; 

H. Dickert, IEHK / RWTH-Aachen 

University, Germany; D.-S. Kim, IEHK 

/ RWTH-Aachen University, 

Assessment of influence of 

hydrogen on deformation 

behavior by coupled 

experimental and numerical 

method 

P. Noury, Ruhr-Universitaet 

Bochum, Germany; P. Schwittek, 

Ruhr-Universitaet Bochum, Germany; 

Mohamad Zamanzade, Universitaet 

des Saarlandes, Saarbruecken, 

Germany; A. Barnoush, Universitaet 

In-Situ Microstructure and 

Phase Evolution upon 

Hot-working of Titanium 

Aluminides 

Klaus-Dieter Liss1, Thomas 

Schmoelzer2, Svea Mayer2, Mark 

Reid3, Kun Yan1,3, Saurabh Kabra3, 

Rian Dippenaar3, Helmut Clemens2; 

1 Australian Nuclear Science and 

Technology Organisation, Australia 

18:15 





Poster 4: B2-1040 

Analysis of diffusion paths 

and effective diffusion 

coefficients in multiphase 

materials 

P.Schwittek, ICAMS 

(Ruhr-University), Bochum, 

Germany;S.Brinckmann, ICAMS 


Germany;A. Hartmaier, ICAMS 


Enhancement of mechanical 

properties of commercially 

pure titanium by severe 

plastic deformation targeting 

bio-medical applications 

A. Medvedev, Monash University, 

Melbourne, Australia; H.P Ng, 

Monash University, Melbourne, 

Australia; R. Lapovok, Monash 

University, Melbourne, Australia; Y. 

Estrin, Monash University, 

42 


Thursday 

pm2 

Symposium: B9 



Symposium: C3 


Joining 

Symposium: C6 



Symposium: E3 




Symposium: 

Room: 

Microstructure and properties 

relationship 

Joining 2 

Printed Electronics 2 

Continuum models 

I. Vicario, Fundación Tecnalia , 

Donostia-San Sebastian (Spain) 

Processing-structure-propert 

y Correlation of 

Mg-(5.6Ti+3Al) Composite 

Sankaranarayanan S. 1*, 

Jayalakshmi S. 1, Abdelmagid S. H. 

2 and Manoj G. 1 

1 Department of Mechanical 

Engineering, National University of 

Singapore (NUS), Singapore 117 

G. Weber, Bundesanstalt für 

Materialforschung und -prüfung, 

Berlin (Germany) 

Laser welding of different 

brasses by means of a 

defocused beam 

P. Herzog, Wieland-Werke AG, Ulm 

(Germany) 

W. Jaegermann, Technische 

Universität Darmstadt (Germany) 


Nanoparticle dispersion 

based printed electronics 

and the electrochemical 

gating approach 

S. Dasgupta, G. Stösser, R. Kruk, H. 

Hahn, Institute of Nanotechnology, 


(KIT), Eggenstein-Leopoldshafen, 

Germany 

A. Hartmaier, Ruhr-Universität 

Bochum (Germany) 


Micromechanical 

Constitutive Modeling of 

Transformation Induced 

Plasticity 

A. Koester, Interdisciplinary Centre 

for Advanced Materials Simulation 

(ICAMS),Bochum,Germany; A. Ma, 

Interdisciplinary Centre for Advanced 

Materials Simulation 

(ICAMS),Bochum,Germany et al. 

17:00 

Mechanical Behavior and 

Microstructure of High 

Strength Pure Titanium 

Material via Direct 

Consolidation of TiH2-TiO2 

Powder Mixture 

T. Mimoto, Osaka University, 

Osaka, Japan; J. Umeda, Osaka 

University, Osaka, Japan; K. 

Kondoh, Osaka University, Osaka, 

Japan 

Fatigue Improvement of 

AA2024 Aluminum Welded 

Joints by Ultrasonic Impact 

Treatment 

I. Klochkov, V. Kiryan, I. Berezin, 

Paton Electric Welding Institute, 

Kiev, Ukraine; Y. Kudryavtsev, J. 

Kleiman, Structural Integrity 

Technologies Inc., Markham, 

Ontario, Canada 

Crystallographic Texture 

Simulation based on a new 

Mean Field Approach 

K. Jöchen, Institute of Engineering 

Mechanics, Chair for Continuum 

Mechanics, Karlsruhe Institute of 



17:15 

Study of the influence of 

alloying elements on the 

tensile properties of 

Al-Si9Cu3 

I.Vicario, I. Crespo, H. Galarraga, j.C. 

Garcia, P.Egizabal. Fundacion 

TECNALIA, Donostia-San Sebastian, 

Spain 

Influence of Electrode Caps 

on the Process Reliability of 

Resistance Spot Welding in 

the Automobile 

Manufacturing 

Gert Weber BAM Federal Institute for 

Materials Research and Testing, 

Berlin, Germany; Michael Rethmeier 

BAM Federal Institute for Materials 

Research and Testing, Berlin, 

Germany 

Solution processed ZnO thin 

film transistors: Influence of 

annealing atmospheres and 

synthetic air post-treatment 

on transistor characteristics 

C. Busch, G. Schierning, R. 

Theissmann, R. Schmechel, 

University Duisburg-Essen, 


Plastic strain gradient 

induced internal stress and 

geometrically necessary 

dislocation density in grain 

boundary regions 

A. Ma, Ruhr-Universitaet Bochum, A. 

Hartmaier, Ruhr-Universitaet Bochum 

17:30 

Internal stresses in a high 

strength AA7xxx alloy by 

neutron diffraction 

P. Schloth, J. Repper, Paul Scherrer 

Institut, Materials Science and 

Simulation, Villigen PSI, 

Switzerland, Ecole Polytechnique 

Fédérale de Lausanne, Laboratoire de 

Simulation des Matériaux,Lausanne, 

Surface modification for 

increased material joint 

strength between aluminium 

and infiltrated titanium 

structure elements 

U. Specht, J. Clausen, J. Ihde, B. 

Mayer; Fraunhofer-Institut für 

Fertigungstechnik und Angewandte 

Materialforschung IFAM, Bremen, 

Germany 

Manufacturing of printed 3D 

RFID Transponder Antennas 

R. Zichner, Fraunhofer ENAS, 

Chemnitz, Germany; R. R. Baumann, 

Fraunhofer ENAS and Chemnitz 



Continuum simulation of the 

evolution of dislocation 

densities during 

nanoindentation 

Philipp Engels, Ruhr University, 

Bochum, Germany; Anxin Ma, Ruhr 

University, Bochum, Germany; 

Alexander Hartmaier, Ruhr 

University, Bochum, Germany 

17:45 

Evaluation of the 

Superheating Effect on the 

Phase Formation and 

Mechanical Behavior of an 

Alloy Mg-Al-Ca-La 

S. Bartex, Federal University of Rio 

Grande do Sul, Porto Alegre, 

Brazil,A. Garcia, Federal University of 

Rio Grande do Sul, Porto Alegre, 

Brazil; 

V. Barcellos, Federal University of 

Evaluation of lengthwise 

welded metal strips made 

from different material 

combinations on copper 

base 

D. Herrmann, P. Herzog (Sp), 

Wieland-Werke AG, Ulm (Germany) 

Carbon Nanotubes as 

Electrode and Acceptor in 

Organic Solar Cells 

Gerhard Lackner1, Ingolf Endler2, 

Frank Meissner2, Anna Czeschik1, 

Rocco Liebschner3, Viktor Bezugly3, 

Anindya Majumder3, Martin 

Mkandawire3, Richard Boucher3, 

Daria Kovalenko3, and Doru C. 

Micromechanical Modeling 

of the Nonlinear Material 

Behavior of Metal Matrix 

Composites 

K. Schulz, Karlsruhe Institute of 

Technology, Karlsruhe, Germany; S. 

Sandfeld, Karlsruhe Institute of 

Technology, Karlsruhe, Germany; P. 

Gumbsch, Karlsruhe Institute of 

Technology, Karlsruhe, Germany 

18:00 

Benefit of Cooling Curve 

Analysis for Simulation of 

Aluminum Casting Process 

Gerhar Huber*, Mile B. Djurdjevic* 

* Nemak Linz GmbH, 

Zeppelinstrasse 24, Linz, Austria 





Poster 4: C3-1123 

Towards the electronic 

structure of printed multil. 

devices: photoelectron 

spectroscopy of solution 

processed organic semiconductor 

surfaces and 

T. Mayer, Technical University of 


Advanced modelling and 

simulation of deep drawing 

processes based on crystal 

plasticity assisted material 

characterisation 

M.Baiker, Fraunhofer Institute for 

Mechanics of Materials IWM, 

Germany D.Helm, Fraunhofer 

Institute for Mechanics of Materials 

IWM, Germany 

18:15 


43

Postersession - On Display Tuesday through Thursday 

Topic: A - Functional 


A1-61 

oral poster 

A1-175 

oral poster 

A1-689 

A1-866 

oral poster 

High-Temperature Functional 


Hydrothermal Crystal growth and 

piezoelectric properties of GaAsO4 

M.Souleiman,Université Montpellier 

2,Montpellier,France;O.Cambon,Université 

Montpellier 2,Institut Charles Gerhardt 

,Montpellier,France;C.Levelut,Université 

Montpellier 2,Laboratoire Charles Coulomb 

,Montpellier,France et al. 

Modeling the influence of Re on 

precipitate coarsening in negatively 

misfitting SX Ni-base superalloys : A 

phase field study 

L. Mushongera, M. Fleck, J. Kundin, H. 

Emmerich, 

Materials&Process Simulation, University of 


Effect of Filler on the High 

Temperature Properties of 

Glass-Based Seals for Solid Oxide 

Fuel Cells 

Seong-Min Park,Myongji University, Yongin, 

Korea; Sung-Mi Jo,Myongji University, 

Yongin, Korea; Myung-Jae Choi, Myongji 

University,Yongin, Korea; Sung Park,Myongji 

University, Yongin, Korea et al. 

High Temperature Induced Traps in 

Tungsten/GaN Schottky Diodes 

M. Pleul, Technical University Chemnitz, 

Chemnitz, Germany; M. Arnold, Technical 

University Chemnitz, Chemnitz, Germany; D. 

Lehmann, Technical University Chemnitz, 

Chemnitz, Germany et al. 

A2-37 

A2-132 

A2-337 

oral poster 

A2-637 


Migration of Additives in Simulated 

Landfills and Soil Burial Degradation 

of New Bio-Based Additives 

N. Lardjane, Université Mouloud MAMMERI de 

Tizi-Ouzou, Algérie 

N. Belhaneche-Bensemra, Ecole Nationale 

Polytechnique, El-Harrach, Alger, Algérie 

V. Massardier,IMP@INSA-Lyon, CNRS 

UMR5223, Université de Lyon, Villeurbanne, 

France 

Microgel based Stimuli-Responsive 

Capsules 

Garima Agrawal,Xiaomin Zhu, Andrij Pich, DWI 

an der RWTH Aachen e.V. and Institute for 

Technical and Macromolecular Chemistry of 

RWTH Aachen University, Forckenbeckstraße 

50, 52056 Aachen, Germany 

Self-healing of polymer matrices with 

liquid-compartmented fibres 

M. Prajer, Novel Aerospace Materials Group, 

Faculty of Aerospace Engineering, TU Delft, The 

Netherlands et al. 

Bioresponsive Substrates as a Sensor 

for Laccase: Sensor-fabrication by 

Inkjet Printing 

A.Rank, B.Unterauer, M.Mühlberger, Functional 

Surfaces and Nanostructures, Profactor GmbH, 

4407 Steyr-Gleink, Austria 

K. Schneider, U. Geweßler, G. Gürbitz, ACIB 

GmbH,TU Graz, Petersgasse 14, 8010 Graz, 

Austria 

H. Wiesbauer, Eurofoam GmbH, 4550 

Kremsmünster, Austria 

A2-1063 

oral poster 

A2-1066 

A2-1068 

oral poster 

A3-71 

Shape-programmed folding of 

stimuli-responsive polymer bilayers 

Georgi Stoychev1, Svetlana Zakharchenko1, S. 

Turcaud 2, J. Dunlop 2, Leonid Ionov1, 

1) Leibniz-Institut für Polymerforschung 

Dresden e.V., Hohe Str. 6, D-01069 Dresden, 

Germany 

2) Department of Biomaterials, Max Planck 

Institute of Colloids and Interfaces, Am 

Mühlenberg 1, D-14424, Potsdam, Germany 

Photocontrol of the enzymatic 

activity of histone deacetylase-like 

amidohydrolase 

M. Korbus, University of Applied Sciences 


Multiscale modeling of 

photoresponsive polymers 

G. Balasubramanian, TU Darmstadt, Darmstadt, 

Germany; M.C. Boehm, TU Darmstadt, 

Darmstadt, Germany; J. Schulte, Bruker Biospin 

GmbH, Silberstreifen, Rheinstetten, Germany; F. 

Mueller-Plathe, TU Darmstadt, Darmstadt, 

Germany. 



Magnetic shape memory elements 

based on polycrystals 

J. Romberg, IFW-Dresden, Dresden, Germany; C. 

Huerrich, IFW-Dresden, Dresden, Germany; U. 

Gaitzsch, IFW-Dresden, Dresden, Germany; M. 

Poetschke, IFW-Dresden, Dresden, Germany; S. 

Roth, IFW-Dresden, Dresden, Germany et al. 

A1-1095 

oral poster 

A1-1155 

A1-1156 

New nickel-base wrought 

superalloys for high temperature 

rotor and stator parts of gas turbine 

engines 

S. Ovsepyan, "VIAM" FSUE, RF SRC, Moscow, 

Russia; 

B. Lomberg, "VIAM" FSUE, RF SRC, Moscow, 

Russia; 

M. Bakradze, "VIAM" FSUE, RF SRC, Moscow, 

Russia; 

I. Mazalov,"VIAM" FSUE, RF SRC, Moscow, 

Russia. 

Kinetics and Chemistry of Chemical 

Vapor deposition of MTS into SiC 

W. Xu, A. Li, Research Center for Composite 

Materials, Shanghai University, Shanghai, 

China; Y. Zhu, E. Schnack, Institute of Solid 

Mechanics, Karlsruhe Institute of Technology, 

Karlsruhe, Germany 

Effect of Surface State on Hydrogen 

Permeation Flux of Pure Niobium 

Membrane 

Y. Matsumoto, Oita National College of 

Technology, Oita, JAPAN; H. Yukawa, Nagoya 

University, Nagoya, JAPAN; T. Nambu, Suzuka 

National College of Technology, Suzuka, 

JAPAN 

A2-1016 

A2-1018 

A2-1019 

oral poster 

A2-1060 

The Synthesis and Characterization 

of Multifunctional Poly(p-phenylene 

ethynylene)s with Oxidation and 

Reduction Sensitive Moieties 

M. Schroeter, Helmholtz-Zentrum Geesthacht 

GmbH, Teltow, Germany; M. Behl, 

Helmholtz-Zentrum Geesthacht GmbH, Teltow, 

Germany; A. Lendlein, Helmholtz-Zentrum 

Geesthacht GmbH, Teltow, Germany 

Crosslinked Poly(ethylene 

glycol)-based Polyelectrolytes as 

pH-sensitive Hydrogels 

Alexander Southan, Institute for Interfacial 

Engineering IGVT, University of Stuttgart, 

Germany; Christian Schuh, Fraunhofer Institute 

for Interfacial Engineering and Biotechnology 

IGB, Stuttgart, Germany et al. 

Shape-Memory Properties of 

Electrospun Non-Wovens 

T. Sauter, Centre for Biomaterial Development 

and Berlin Brandenburg Center for Regenerative 

Therapies, Institute of Polymer Research, 

Helmholtz-Zentrum Geesthacht et al. 

Novel Stimuli-Responsive 

Ferrocene-Containing Block 

Copolymers 

J. Elbert, M. Rehahn, M. Gallei 

A3-126 

A3-172 

A3-203 

Co-doping of Mn and V to LaNbO4 

for Ferromagnetic-Ferroelastic 

Materialization 

S. Kohiki, Kyushu Inst. Tech., Kitakyushu, 

Japan; S. Kawakami, Kyushu Inst. Tech., 

Kitakyushu, Japan; F. Tsutsui, Kyushu Inst. 

Tech., Kitakyushu, Japan; N. Takeda, Kyushu 

Inst. Tech., Kitakyushu, Japan et al. 

Metamagnetism and 

Magnetocaloric Effect in Epitaxial 

Ni-Mn-Ga-Co and Ni-Mn-In-Co 

Films 

R. Niemann, IFW Dresden, P.O. Box 270116, 

01171 Dresden, Germany; 

A. Diestel, IFW Dresden, P.O. Box 270116, 


L. Schultz, IFW Dresden, P.O. Box 270116, 

01171 Dresden, Germany et al. 

Improving microstructure and 

mechanical behaviour of 

polycrystalline Ni50Mn29Ga21 after 

hot extrusion 

R. Neugebauer1, L. Weisheit1, A. Böhm1, I. 

Navarro1, R. Chulist2, W. Skrotzki2, W.-G. 

Drossel1 

1 Fraunhofer IWU, 01187 Dresden, Germany, 

andrea.boehm@iwu.fraunhofer.de 

2 Institut für Strukturphysik, Technische 

Universität Dresden, 01062 Dresden, Germany 

44




A3-344 

A3-432 

A3-505 

A3-555 

A3-671 

A3-672 

A3-677 

Influence of strain on the magnetic 

properties of sputtered Fe70Pd30 

thin films detected by frequency 

mixing 

Christoph Bechtold; Iulian Teliban; Claas 

Thede; Eckhard Quandt, Inorganic Functional 

Materials, Institute for Materials Science, Faculty 

of Engineering, Christian-Albrechts-Universität 

zu Kiel, Germany; 

Dynamic simulation of the giant 

magnetocaloric effect in Ni-Mn 

based Heusler alloys 

T. Gottschall, IFW Dresden, Helmholtzstraße 20, 


J. Liu, IFW Dresden, Helmholtzstraße 20, 01069 

Dresden, Germany; 

K. Skokov, IFW Dresden, Helmholtzstraße 20, 

01069 Dresden, Germany et al. 

Lead-free ferroelectric films of 

(Ba0.85Ca0.15)(Zr0.10Ti0.9)O3 

prepared by pulsed laser deposition 

A. Piorra, Institute for Materials Science, 

Christian-Albrechts- Universität zu Kiel, Kiel, 

Germany; V. Hrkac, Institute for Materials 

Science, Christian-Albrechts- Universität zu Kiel, 

Kiel, Germany et al. 

Highly strained epitaxial Fe70Pd30 

films: Relaxation mechanism and 

magnetic properties 

S. Kauffmann-Weiss, IFW Dresden, Institute for 

Metallic Materials, 01171 Dresden, Germany, 

Dresden University of Technology, Institute for 

Materials Science, 01062 Dresden, Germany et 

al. 

Modelling of the Performance of 

Layered Magnetoelectric Cantilever 

Sensors: Bilayers vs. Multilayers and 

FeCoBSi-AlN vs. FeCoBSi-PZT 

Matthias C. Krantz, Martina Gerken 

Institute of Electrical and Information 

Engineering, University of Kiel, Germany 

Control of Magnetic Shape Memory 

Actuators for Precise Positioning 

Leonardo Riccardi 

Hartmut Janocha 

Thickness Dependence of 

Magnetic-Field-Induced Reorientation 

in Single Crystalline Ni-Mn-Ga Foils 

under Tension 

V. Pinneker 1, B. Krevet 1, A. Sozinov 2, Y. 

Ezer 2 and M. Kohl 1 

1Karlsruhe Institute of Technology, IMT, P.O. 

Box 3640, 76021 Karlsruhe, Germany 

2AdaptaMat Ltd. , Yrityspiha 5, FIN-00390 

Helsinki, Finland 

A3-693 

A3-701 

A3-702 

A3-729 

A3-827 

A3-852 

A3-893 

Review of MSM (Magnetic Shape 

Memory) based applications 

A.J. Niskanen, PhD, AdaptaMat 

Oy,Helsinki,Finland 

J.Perento, AdaptaMat Oy,Helsinki, Finland 

K.Korpiola, PhD, AdaptaMat Oy,Helsinki 

Finland 

A theoretical study of magnetic 

properties of ferromagnetic shape 

memory Heusler Ni50Mn25+xZ25-x 

(Z=Sn, In) alloys 

V.D. Buchelnikov, Chelyabinsk State 

University, Chelyabinsk, Russia; V.V. 

Sokolovskiy, Chelyabinsk State University, 

Chelyabinsk, Russia; M.A. Zagrebin, 

Chelyabinsk State University, Chelyabinsk, 

Russia et al. 

Vacuum packaged magnetoelectric 

composites 

Christine Kirchhof, Institute for Materials 

Science, Christian-Albrechts- University, Kiel, 

Germany ; Henry Greve, Institute for Materials 

Science, Christian-Albrechts- University, Kiel, 


Unconventional fabrication schemes 

for magnetoelectric sensors based 

on piezoelectric and magnetostictive 

materials 

S. Kaps, Functional Nanomaterials Institute for 

Materials Science University of Kiel, Kiel, 

Germany, 

Y. K. Mishra, , Functional Nanomaterials 

Institute for Materials Science University of Kiel, 

Kiel, Germany, 

V. Hrkac, Synthesis and Real Structure Institute 

for Materials Science University of Kiel, Kiel, 

Modelling the Cooling Performance 

of NiMnGa, NiMnSn, and Gd 

Refrigerants Under Various 

Thermodynamic Cycles 

K.P. Skokov,Leibniz Institute for Solid State 

and Materials Research (IFW), D-01171 


A.Yu. Karpenkov, Tver State University, 

170100, Tver, Russia 

J.D. Moore, Leibniz Institute for Solid State and 

Materials Research (IFW), D-01171 Dresden, 

Germany 

Discrete Disclination Dynamics: 

hierachical twin boundary motion in 

magnetic shape-memory alloys 

B. Reinholz, Ruhr-Universität Bochum, 

Bochum, Germany; S. Brinckmann, 

Ruhr-Universität Bochum, Bochum, Germany; 

Continuum Models of Adaptive 

Ferromagnetic Martensite 

Ulrich K. Rößler, IFW Dresden, Germany 

A3-949 

A3-987 

A3-991 

A3-1014 

A3-1020 

A3-1049 

A3-1100 

Understanding the phase sequence 

of Fe-Pd alloys from first-principles 

calculations and thin film 

experiments 

M. E. Gruner, University of Duisburg-Essen, 

Duisburg, Germany; 

S. Hamann, Ruhr-University Bochum, Bochum, 

Germany; 

S. Kauffmann-Weiss, IFW Dresden, Dresden, 

Germany; 

P. Entel,University of Duisburg-Essen, 

Duisburg, Germany et al. 

Structure and microscopic 

magnetism of epitaxial Ni-Mn-Ga 

films 

T. Eichhorn, R. Hausmanns, P. Klaer, M. 

Kallmayer, H.-J. Elmers and G. Jakob; Johannes 

Gutenberg University, Mainz, Germany 

TEM investigations on materials for 

biomagnetic sensing 

Lorenz Kienle, Christian Albrechts Universtiy, 

Kiel, Germany; 

Viktor Hrkac, Christian Albrechts Universtiy, 

Kiel, Germany; 

Sören Kaps, Christian Albrechts Universtiy, Kiel, 


Fabrication and characterization of a 

ME composite based on piezoelectric 

porous InP with magnetostrictive 

metals 

M.-D. Gerngross, Institute for Materials Science, 

University of Kiel, Kiel, Germany; 

J. Carstensen, Institute for Materials Science, 

University of Kiel, Kiel, Germany et al. 

Hard and soft X-ray sprectroscopy 

of the magnetoelectric ZnO:Ni 

interface 

Arndt Quer, University of Kiel, Kiel, Germany; 

Erik Kröger, University of Kiel, Kiel, Germany; 

Matthias Kalläne, University of Kiel, Kiel, 

Germany; Kai Rossnagel, University of Kiel, 

Kiel, Germany et al. 

Macroscopic behavior of 

magnetic-shape-memory particles 

embedded in a polymer matrix 

S. Conti, M. Lenz, M. Rumpf, University of 

Bonn, Bonn, Germany 

Chemical Trends for Phase 

Transitions in Magnetic Shape 

Memory Alloys Derived from First 

Principles 

Tilmann Hickel, Biswanath Dutta, Jörg 

Neugebauer, 

Max-Planck-Institut für Eisenforschung GmbH, 

Düsseldorf, Germany 

A3-683 

Sandwich type AlN-FeCoSiB thin film 

magnetoelectric composite 

E. Yarar, Christian-Albrechts-University, Kiel, 

Germany; A. Piorra, 

Christian-Albrechts-University, Kiel, Germany; 

D. Meyners, Christian-Albrechts-University, Kiel, 


A3-896 

A Phase-Field Model for the 

Magnetic Shape Memory Effect 

C. Mennerich, Karlsruhe University of Applied 

Sciences 

F. Wendler, Karlsruhe University of Applied 


M. Jainta, Karlsruhe University of Applied 


B. Nestler, Karlsruhe Institute of Technology 

45




A4-737 

oral poster 

A4-1082 

oral poster 

A4-1144 

A4-1154 

A5-113 

A5-177 

A5-185 


Functional Nanocomposites: An 

Electrospun Nanofibers Approach 

Mady Elbahri 1,2*, Seyed Shahin Homaeigohar 

1, Ahnaf Usman Zillohu 1 

1)Helmholtz-Zentrum Geesthacht, Institute of 

Polymer Research-Nanochemistry and 

Nanoengineering, Max-Planck-Str. 1, 21502 


2)Christian-Albrechts University at Kiel, 

Water-Soluble and Biocompatible 

Superparamagnetic Fe3O4 

Nanoparticles for Enhanced MRI and 

Cell Labeling Applications 

L. Xiao, University of Cologne, Cologne, 

Germany; S. Mathur*, University of Cologne, 

Cologne, Germany 

Interfacial Confined Formation of 

Nanostructures for High-efficiency 

Dye-Sensitized Solar Cells 

Feng GU, Shufen WANG, Jan MA, Nanyang 

Technological University, Singapore; 

Chunzhong LI, East China University of Science 

and Technology, Shanghai, China 

#+, Shufen WANG2, Jan MA1, Chunzhong LI2 

Synthesis and Characterization of 

Photostimulable Core/Shell 

Structured Nanoparticles 

Moritz Milde, Fraunhofer Institute for Silicate 

Research ISC, Wuerzburg, Germany; Sofia 

Dembski, Fraunhofer Institute for Silicate 

Research ISC, Wuerzburg, Germany et al. 

Electrical Fatigue of Functional 


Influence of triplet excitons on the 

performance and lifetime of polymer 

based organic light emitting diodes 

Oili Pekkola, Electronic Materials Department, 

Institute of Materials Science, Technische 

Universität Darmstadt, Darmstadt, Germany et 

al. 

Composite ferroelectrics for 

high-strain actuator applications 

C. Groh, Technische Universität Darmstadt, 


M. Acosta, Technische Universität Darmstadt, 


W. Jo, Technische Universität Darmstadt, 


J. Rödel, Technische Universität Darmstadt, 


Poly(p-phenylene vinylenes): 

Tolerance and requirements of the 

Gilch Synthesis 

N. Vilbrandt, Technische Universität Darmstadt, 

Darmstadt, Germany; M. Rehahn, Technische 

Universität Darmstadt, Darmstadt, Germany 

A5-284 

A5-384 

A5-418 

A5-529 

A5-549 

A5-556 

A5-617 

Atomic Layer Deposition ALD of 

Aluminum Oxide (Al2O3) on Tin 

doped Indium Oxide (ITO) 

Thorsten J. M. Bayer, Department of Materials 

and Earth Science, Technische Universität 

Darmstadt, Petersenstr. 32, 64287 Darmstadt, 


Local structure and ferroic properties 

of the lead-free relaxor ferroelectric 

Na1/2Bi1/2TiO3 

M. Gröting, Technische Universität Darmstadt, 

Darmstadt, Germany; I. Kornev, Ecole Centrale 

Paris, Châtenay-Malabry, France; B. Dkhil, Ecole 

Centrale Paris, Châtenay-Malabry, France et al. 

Finite element simulation on the 

interaction of the point defects with 

domain structure in ferroelectrics via 

phase field method 

B.X. Xu, P. Stein, Y.N. Zuo, Institute of 

Materials Science, TU Darmstadt, Germany. 

Electronic properties of LiMO2 

(M=Co, Ni) cathode materials and 

of their interfaces with a liquid 

electrolyte: model studies using thin 

film electrodes 

G. Cherkashinin, Darmstadt University of 

Technology, Darmstadt, Germany; D. Ensling, 

Darmstadt University of Technology, 

Darmstadt, Germany, now at VARTA 

Microbattery GmbH, Ellwangen, Germany et al. 

Field-induced Transition from relaxor 

to ferroelectric behavior in lead –free 

Mn-doped (100-x)BNT-xBT (x=3, 6 

and 9) 

André Schmidt, TU Darmstadt, Germany; 

Eva Sapper, TU Darmstadt, Germany (presenting 

author); 

Silke Schaab, TU Darmstadt, Germany; 

Wook Jo, TU Darmstadt, Germany; 

Torsten Granzow, TU Darmstadt, Germany et al. 

Li-ion microbatteries: thin film 

materials, interfaces and deposition 

processes 

J. Song, Darmstadt University of Technology, 

Darmstadt, Germany, now at University of 

Texas at Austin, Austin, USA; S. Jacke, 

Darmstadt University of Technology, 

Darmstadt, Germany, now at GSI, Darmstadt, 


Large Blocking Force in 

Bi1/2Na1/2TiO3-Based Lead-Free 

Piezoceramics 

Robert Dittmer, TU Darmstadt, Darmstadt, 

Germany; 

Emil Aulbach, TU Darmstadt, Darmstadt, 

Germany; 

Kyle G. Webber, TU Darmstadt, Darmstadt, 

Germany; 

Wook Jo, TU Darmstadt, Darmstadt, Germany et 

al. 

A5-633 

A5-877 

A5-904 

A5-927 

A5-957 

A5-1008 

A5-1009 

A5-1044 

Determination of Polarization 

Dependence of Schottky Barrier 

Heights at Ferroelectric/Electrode 

interfaces 

F. Chen, Hefei Institute of Physical Sciences, 

Hefei, China; 

S. Schaab, S. Li, A. Klein, Technische 


Doping of SnO2: Insights in doping 

mechanisms from first principles 

Peter Agoston, TU-Darmstadt, Darmstadt, 

Germany; 

Andreas Klein, TU-Darmstadt, Darmstadt, 

Germany; 

Karsten Albe, TU-Darmstadt, Darmstadt, 

Germany; 

Orientation and property 

characterization of lead-free 

piezoelectrics by in-situ and ex-situ 

methods 

M. C. Ehmke, Purdue University, West 

Lafayette, USA; C. M. Fancher, Purdue 

University, West Lafayette, USA; J. E. Blendell, 

Purdue University, West Lafayette, USA; K. J. 

Bowman,Illinois Institute of Technology, 

Chicago, USA 

Correlating Preferred Orientation and 

Anisotropy in Lead Free 

Piezoelectrics 

Matthias Ehmke, Purdue University, West 

Lafayette, IN, USA; Christopher Fancher, Purdue 

University, West Lafayette, IN, USA; Zizhao 

Zhao, Purdue University, West Lafayette, IN, 

USA et al. 

Effects of Lead-Oxide Stoichiometry 

of PZT Ceramics on Structure, 


Electromechanical properties 

Hans Kungl, Institute of Applied Materials – 

Ceramics in Mechanical Engineering, Karlsruhe 

Institute of Technology, Karlsruhe, Germany 

Moritz Oldenkotte, Robert Bosch GmbH, 

Bamberg, Germany 

Kristin A. Schönau, Robert Bosch GmbH, 

Characterization of BNT-xBT 

Ceramics by Solid State NMR 

Spectroscopy 

Hergen Breitzke*, Emil Aulbach, Wook Jo, 

Yeping Xu, Pedro Groszewicz, Jürgen Rödel, 

Gerd Buntkowsky*, Technical University 

Darmstadt, Department of Chemistry, 

Petersenstr. 20, D-64287 Darmstadt, Germany 

Characterization of Lithium 

containing Electrode Materials by 

multinuclear Solid State NMR 

Spectroscopy 

Yeping Xu, Pedro Groszewicz, Hergen 

Breitzke*, Gerd Buntkowsky*, Technical 

University Darmstadt, Department of Chemistry, 

Petersenstr. 20, D-64287 Darmstadt, Germany 

Statuskolloquium SFB595: 

Ferroelectrics 

J. Rödel, Technische Universität Darmstadt 

(Germany) 

46




A5-1045 

A5-1046 

Statuskolloquium SFB595: Ionic 

conductors 

W. Jaegermann, Technische Universität 


Statuskolloquium SFB595: Organic 

semiconductors 

H. von Seggern, Technical University of 


A7-138 



Electrochemical Performance and 

Calorimetric Characterization of 

Carbon-Rich Polymer-Derived SiOC 

Ceramics as Anode Material in 

Li-Ion Batteries 

A7-440 

Investigation of the phase relations 

in (Co,Cu)-Li-Sn and the binary 

constituent systems 

S. Fürtauer, University Vienna, Department of 

Inorganic Chemistry / Materials Chemistry, 

Vienna, Austria; 

A. Yakymovych, University Vienna, Department 

of Inorganic Chemistry / Materials Chemistry, 

Vienna, Austria et al. 

A5-1120 

A6-134 

A6-204 

A6-339 

A6-557 

In situ Raman spectroscopy of 

secondary Li-ion batteries at work 

C. Hess, T. Groß, Technische Universität 


Modern Aspects in Structural 

Phase Transformations 

Amorphous Thin Films for Metallic 

Microtubes 

H. Turnow, IFW Dresden, Dresden, Germany; 

H. Wendrock, IFW Dresden, Dresden, Germany; 

T. Gemming, IFW Dresden, Dresden, Germany; 

J. Eckert, IFW Dresden, Dresden, Germany 

Continuous Heating Dissolution 

Diagrams of Aluminium Alloys 

Benjamin Milkereit, University of Rostock, 

Faculty of Mechanical Engineering and Marine 

Technology, Chair of Materials Science, 

Rostock, Germany et al. 

Deep liquid undercooling and 

nucleation in higher melting fcc 

metals 

J. Bokeloh, Westfälische Wilhelms-Universität 

Münster, Münster, Germany; 

C. Simon, Westfälische Wilhelms-Universität 


G. Wilde, Westfälische Wilhelms-Universität 


Grain refinement of the beta phase 

during solidification of gamma-TiAl 

based alloys 

D. Gosslar, Hamburg University of Technology, 

Hamburg, Germany; 

R. Günther, Hamburg University of 

Technology, Hamburg, Germany; U. Hecht, 

Access e.V., Aachen, Germany; C. Hartig, 

Hamburg University of Technology, Hamburg, 


A7-141 

A7-174 

A7-176 

A7-276 

A7-348 

A7-434 

J. Kaspar, Technische Universität Darmstadt, 

Darmstadt, Germany; D. Cupid, Karlsruher 

Institut für Technologie, Karlsruhe, Germany; 

M. Graczyk-Zajac, Technische Universität 


Thermodynamic investigations in the 

system Li-Si 

Daniel Thomas, Nadine Jürich, Regina Hüttl, 

Jürgen Seidel and Florian Mertens 

TU Bergakademie Freiberg, Germany 

Modelling of (de)intercalation in 

Li-ion battery materials: Structural 

stability of FePO4 from ab initio 

calculations 

Hamidreza Hajiyani, ICAMS, Ruhr-Universität 


Thomas Hammerschmidt, ICAMS, 

Ruhr-Universität Bochum, Germany; 

Ralf Drautz, ICAMS, Ruhr-Universität Bochum, 

Germany 

Combined Nuclear Magnetic 

Resonance and X-ray diffraction 

study on single crystalline LiMnPO4 

Christian Rudisch, IFW Dresden 

Hans-Joachim Grafe, IFW Dresden 

Jochen Geck, IFW Dresden 

Sven Partzsch, IFW Dresden 

Ternary 3d metal oxides (Cu, Co, Ni, 

Fe) with large variations of cation 

ratio as conversion type electrodes 

in lithium ion batteries 

D. Wadewitz, IFW Dresden (IKM), Dresden, 

Germany; 

W. Gruner, IFW Dresden (IKM), Dresden, 

Germany; 

H. Ehrenberg, KIT, Karlsruhe, Germany; 

J. Eckert, IFW Dresden (IKM), Dresden, 

Germany; 

Rational Tuning and 

Thermodynamic Characterization of 

Lithium Silcides as Electrode 

Materials for Lithium Ion Batteries 

T. Gruber, TU Bergakademie Freiberg, Freiberg, 

Germany; J. Kortus, TU Bergakademie Freiberg, 


Phase formation in alloy-type 

lithium storage anode materials with 

C, Si and Sn. 

A. Kozlov, Clausthal University of Technology, 

Clausthal-Zellerfeld, Germany; M. Seyring, 

Friedrich Schiller University , Jena, Germany; X. 

Song, Beijing University of Technology, 

Beijing, China et al. 

A7-449 

A7-506 

A7-520 

A7-522 

A7-544 

A7-603 

A7-691 

Hydrothermal Synthesis of LiMPO4 

(M = Mn, Fe, Ni, Co) 

A. Ottmann, Kirchhoff-Institute for Physics, 

Heidelberg, Germany; C. Jaehne, 

Kirchhoff-Institute for Physics, Heidelberg, 

Germany; C. Neef, Kirchhoff-Institute for 

Physics, Heidelberg, Germany et al. 

Nano structured composite coatings 

as electrodes for energy storage 

systems 

G.C. Mondragón Rodríguez, Y. Gönüllü, B. 

Saruhan, German Aerospace Center, Cologne 

Germany. 

Knudsen Effusion Mass Spectrometry 

for new anode materials within the 

Cu-Li-Sn System 

D.Henriques, Forschungszentrum Jülich, IEK-2, 

52425 Jülich, Germany; V.Motalov, Ivanovo 

State University of Chemistry & Technology, 

153000 Ivanovo, Russia et al. 

Determination of Thermodynamic 

Data for Advanced Lithium-Ion 

Battery Materials by Coulometric 

Titration 

M. Prill, Forschungszentrum Jülich GmbH – 

IEK-2, 52425 Jülich, Germany; 

T. Markus, Forschungszentrum Jülich GmbH – 

IEK-2, 52425 Jülich, Germany 

Tracer Diffusion Experiments on the 

Modification of Ionic Mobility in Li 

Containing Compounds by 

Structural Disorder 

J. Rahn, Clausthal University of Technology, 

Clausthal-Zellerfeld, Germany; E. Hüger, 


Clausthal-Zellerfeld, Germany; L. Dörrer, 


Clausthal-Zellerfeld, Germany et al. 

Molybdenum Disulfide: Preparation 

of Different Nanostructures for 

Battery Applications 

D. Albrecht, TU-Clausthal, Goslar, Germany; H. 

Wulfmeier, TU-Clausthal, Goslar, Germany; S. 

Ivanov, TU-Ilmenau, Ilmenau, Germany; A. 

Bund, TU-Ilmenau, Ilmenau, Germany; H. Fritze, 

TU-Clausthal, Goslar, Germany 

Development of lithium manganese 

based thin film cathodes for 

lithium-ion batteries 

J. Fischer, KIT, Karlsruhe, Germany; C. Ziebert, 

KIT, Karlsruhe, Germany; K. Seemann, KIT, 

Karlsruhe, Germany; C. Adelhelm, KIT, 

Karlsruhe, Germany; H. Leiste, KIT, Karlsruhe, 

Germany; M. Stüber, KIT, Karlsruhe, Germany et 

al. 

47




Topic: B - Structural 


A7-707 

A7-783 

A7-815 

A7-876 

A7-881 

A7-895 

A7-919 

A7-1088 

Laser processing of lithium 

manganese oxide cathodes for 

Li-ion cells 

J. Pröll, Karlsruhe Institute of Technology, 

Institute for Applied Materials - Applied 

Materials Physics, P.O. Box 3640, 76021 


Transmission electron microscopy 

(TEM) investigations on the LiCoO2 

cathode material of cycled 

18650-Li-ion batteries 

L. Riekehr, Technische Universität-Darmstadt, 

Fachbereich Material-und Geowissenschaften, 

64287 Darmstadt, Germany et al. 

Template assisted highly porous 

carbon -sulfur composite cathode 

for application in lithium sulfur 

accumulators 

Soumyadip Choudhury, Mukesh 

Agrawal,Leonid Ionov, Manfred Stamm 

Nanosized Silicon for use in Li-ion 

Battery Technology 

S.M. Schnurre, Institute of Energy and 

Environmental Technology e.V. (IUTA), 

Duisburg, Germany; T. Huelser, Institute of 

Energy and Environmental Technology e.V. 

(IUTA), Duisburg, Germany et al. 

Characterization of porous carbon 

films for LiS cathode materials by 

X-Ray Spectrometry 

M. Müller, Physikalisch-Technische 

Bundesanstalt, Berlin, Germany; B. Beckhoff, 

Physikalisch-Technische Bundesanstalt, Berlin, 

Germany 

Electrochemical-Calorimetric studies 

on safety fundamentals of lithium 

ion battery pouch cells 

E. Schuster, Karlsruhe Institute of Technology, 

Institute of Applied Materials (IAM-AWP), 

Karlsruhe, Germany; C. Ziebert, Karlsruhe 

Institute of Technology, Institute of Applied 

Materials (IAM-AWP), Karlsruhe, Germany et al. 

A thermodynamic study of the 

Li-Al-O system and its applications 

to the cathode materials for 

lithium-ion batteries 

Petronela Gotcu-Freis, Karlsruhe Institute of 

Technology (KIT), Institute for Applied 

Materials – Applied Materials Physics 

(IAM-AWP) et al. 

Thermodynamic stability and 

degradation mechanisms of the 

cathode material LiCoO2 

M. Gröting, Technische Universität Darmstadt, 

Darmstadt, Germany; M. Diehm, Technische 

Universität Darmstadt, Darmstadt, Germany; K. 

Albe, Technische Universität Darmstadt, 


B1-129 

oral poster 

B1-146 

oral poster 

B1-169 

oral poster 

B1-252 

oral poster 

B1-256 

B1-289 

oral poster 

B1-335 

oral poster 

B1-462 




Niobium interlayer to further 

improve diffusion bonding of 

gamma-titanium aluminides 

D. Herrmann, Wieland-Werke AG, Ulm, Germany 

F. Appel, Helmholtz-Zentrum Geesthacht, 


High Temperature Fatigue of a 

High-Strength Multiphase Titanium 

Aluminide Alloy 

A.El-Chaikh, Institut für Werkstofftechnik, 

Universität Siegen, Siegen, Germany; Hans- 

Jürgen Christ, Institut für Werkstofftechnik, 

Universität Siegen, Siegen, Germany et al. 

Carbon solubility and thermal 

stability of carbides in high Nb 

containing TiAl alloys 

Li Wang, Heike Gabrisch, Andreas Stark, Florian 

Pyczak, Frank-Peter Schimansky, Uwe Lorenz, 

Institute of Materials Research, 


Max-Planck-Strasse 1, 21502 Geesthacht, 

Germany 

Microstructural Evolution and 

Mechanical Properties of a Cast and 

Heat-treated TiAl Alloy 

E. Schwaighofer, Department of Physical 

Metallurgy and Materials Testing, 

Montanuniversitaet Leoben, Leoben, Austria et 

al. 

Silica Enrichment as raw material for 

Silicon solar grade production 

Kheloufi Abdelkrim, Berbar Yassine ,Kefaifi 

Aissaa, Rahab Hamida, Medjahed Sid Alia, 

Kerkar Fouada 

Development of modulated 

structures in a gamma TiAlNb-alloy 

produced by powder metallurgy 

H. Gabrisch, M. Oehring, F.-P. Schimansky, U. 

Lorenz, A. Stark, and F. Pyczak 

Helmholtz-Zentrum Geesthacht, Geesthacht, 

Germany 

Influence of Ti on the creep 

properties of Mo-Si-B alloys 

D. Schliephake, Karlsruhe Institute of 

Technology, Karlsruhe, Germany; M. Heilmaier, 

Karlsruhe Institute of Technology, Karlsruhe, 

Germany; H. Bei, Oak Ridge National 

Laboratory, Oak Ridge, USA et al. 

Structural Changes Occurring during 

Low-Cycle fatigue of the TNB-V2 

Alloy 

F. Appel, Helmholtz-Zentrum Geesthacht, 

Germany: A. El-Chaikh, University of Siegen, 

Siegen, Germany; H.-J. Christ, University of 

Siegen, Siegen, Germany; 

B1-463 

B1-467 

B1-745 

oral poster 

B1-842 

B1-976 

oral poster 

B1-1059 

B1-1115 

Effect of Borides on Microstructure 

Evolution in Cast Beta-solidifying 

Gamma-Titanium Aluminide Alloys 

M. Oehring, Helmholtz-Zentrum Geesthacht, 

Institute of Materials Research, Geesthacht, 

Germany; 

A. Stark, Helmholtz-Zentrum Geesthacht, 

Institute of Materials Research, Geesthacht, 


Thermal and Athermal Stresses in 

TiAl Alloys 

R. Hoppe, Helmholtz-Zentrum Geesthacht, 

Geesthacht, Germany; F. Appel, 


Germany 

Electron Beam Melting of 

intermetallics: gamma TiAl for 

aerospace applications 

S. Biamino, Politecnico di Torino, Italy; M. 

Terner, Politecnico di Torino, Italy; A. Penna, 

AvioProp, Novara, Italy; O. Hedin, Arcam AB, 

Molndal, Sweden; U. Ackelid, Arcam AB, 

Molndal, Sweden et al. 

Microstructural assessment of 

laboratory slab of Ni-based single 

crystal superalloy CMSX4. 

A. Basir Parsa, Ruhr University Bochum, 

Bochum, Germany; H. Buck, Ruhr University 

Bochum, Bochum, Germany; Ph. Wollgramm, 

Ruhr University Bochum, Bochum, Germany; 

Ch. Somsen, Ruhr University Bochum, 

Bochum, Germany et al. 

Ti-based bulk metallic glass matrix 

composites with in situ precipitated 

Beta-Ti phase fabricated by spark 

plasma sintering 

Shengguan Qu, Chao Yang, YuanYuan Li 

National Engineering Research Center of 

Near-net-shape Forming for Metallic Materials, 

South China University of Technology, 

Guangzhou 510640, People’s Republic of 

China 

Fatigue Crack Growth Thresholds of 

High Nb Gamma-TiAl Produced by 

EBM 

M. Filippini, Politecnico di Milano, Milano, 

Italy; 

S. Beretta, Politecnico di Milano, Milano, Italy; 

G. Pasquero, Avio S.p.A., Rivalta di Torino 

(TO), Italy; 

F. Pelissero, Avio S.p.A., Rivalta di Torino 

(TO), Italy et al. 

Nickel-Aluminum Intermetallic Alloys 

for Application of Aircraft 

Gas-Turbine Engines 

O. Bazyleva, E. Arginbaeva, E. Turenko, Federal 

State unitary enterprise «All-Russian 

Scientific-Research Institute of Aviation 

Materials», Moscow, Russia 

48




B2-66 

oral poster 

B2-242 

oral poster 

B2-306 

oral poster 

B2-310 

oral poster 

B2-332 

oral poster 

B2-396 

oral poster 

B2-511 

oral poster 

B2-623 

oral poster 

Advanced Steels for Structural 

and Functional Applications 

Influence of Grain Orientation and 

Grain Structure on Yield Strength 

and its Anisotropy of X80 Linepipe 

Steel 

W. Mao, C. Zong, G. Zhu, P. Yang, University 

of Science and Technology Beijing, Beijing, 

China; 

High-strength corrosion-resistant 

steels for resilient elements 

Maltseva Liudmila A.1, Maltseva Tatiana, 

Ozerets Natalia, 

Sharapova Valentina and Levina Anna 

1 The Ural Federal University (UrFU), 

Yekaterinburg, Russia 

Email: mla44@mail.ru 

Effect of high-temperature gas-solid 

interaction on phase equilibria and 

sinterability of PM tool steels 

S. Weber, Helmholtz-Zentrum Berlin, Berlin, 

Germany 

K. Zumsande, Helmholtz-Zentrum Berlin, 


N. Krasokha, Ruhr-Universität Bochum, 


S. Huth, Ruhr-Universität Bochum, Bochum, 

Germany 

Ultrafine grained high-alloyed 

austenitic steel enabling TRIP effect 

A. Weidner , A. Müller, H. Biermann, 

Institute of Materials Engineering, TU 

Bergakademie Freiberg, Freiberg, Germany 

Effect of Mn Addition on the 

Microstructure and Mechanical 

Properties of Fe-Al Alloys 

A. Zargaran, Graduate Institute of Ferrous 

Technology, POSTECH University, Pohang, 

Korea; Nack J. Kim, CAAM, POSTECH 

University, Pohang, Korea 

Crack propagation in TWIP steel with 

high delayed fracture susceptibility 

Xiaofei Guo, Department of Ferrous Metallurgy, 

RWTH Aachen University, Aachen, Germany; 

Alireza Saeed-Akbari, Department of Ferrous 

Metallurgy, RWTH Aachen University, Aachen, 


Possible influence of sulfur content 

on the magnetic aging behaviors of 

non-oriented electrical steels 

W. Mao, University of Science and Technology 

Beijing, Beijing, China; P. Yang, University of 

Science and Technology Beijing, Beijing, 

China 

Thermophysical properties of 

Cr-Mn-Ni-TRIP/TWIP steel melts 

T. Dubberstein, TU Bergakademie Freiberg, 

Institute of Iron and Steel Technology, 

Freiberg, Germany; H. P. Heller, TU 

Bergakademie Freiberg, Institute of Iron and 

Steel Technology, Freiberg, Germany et al. 

B2-742 

oral poster 

B2-816 

oral poster 

B2-838 

oral poster 

B2-878 

oral poster 

B2-909 

oral poster 

B2-1040 

oral poster 

B3-170 

oral poster 

Al-free case hardening steel for high 

temperature carburizing 

S. Konovalov, Department of Ferrous 

Metallurgy, RWTH-Aachen University, Germany; 

U. Prahl, Department of Ferrous Metallurgy, 

RWTH-Aachen University, Germany et al. 

Methods for judging parameter 

determinability of a 

physically-based flow stress model 

for TWIP steels 

M. Bambach, Institute of Metal Forming (IBF), 

RWTH Aachen University, Germany 

S. Heppner, Institute of Metal Forming (IBF), 

RWTH Aachen University, Germany 

D. Steinmetz, Max-Planck-Institut für 

Eisenforschung, Düsseldorf, Germany 

F. Roters, Max-Planck-Institut für 

Eisenforschung, Düsseldorf, Germany 

Twinning in a FeMnNiCr TWIP alloy 

under compressive and tensile load 

D. Geissler, Leibniz Institute for Solid State and 

Materials Research Dresden, Dresden, Germany; 

A. Kauffmann, Leibniz Institute for Solid State 

and Materials Research Dresden, Dresden, 


First-principles Investigation of the 

Effect of Carbon on the Stacking Fault 

Energy in High-Strength Steels 

T. Hickel, I. Bleskov, A. Dick, J. Neugebauer, 

Max-Planck-Institut für Eisenforschung GmbH, 

Max-Planck-Straße 1, 40237 Düsseldorf, 

Germany 

Microstructural Analysis of Strain 

Rate Sensitivity of Dual-Phase Steel 

E. Scharifi, Max-Planck-Institut für 

Eisenforschung, Dusseldorf, Germany; 

C.C. Tasan, Max-Planck-Institut für 

Eisenforschung, Dusseldorf, Germany; 

J.P.M. Hoefnagels, Eindhoven University of 

Technology, Eindhoven, Netherlands et al. 

Evaluation of Corrosion Behaviour of 

17-4 PH Stainless Steel Foam by Salt 

Spray Test 

Ilven Mutlu, Istanbul University, Metallurgical 

and Materials Engineering Department, Istanbul, 

Turkey; 

Enver Oktay, Istanbul University, Metallurgical 


Turkey 

Glasses and Optical Materials 

Thermally Activated and Photo 

Induced Formation of Metal 

Nanoparticles in Ionic Glasses 

Sindy Reibstein,Friedrich-Alexander Universität 

Erlangen-Nürnberg, Germany; Armin Höll, 

Helmholtz-Zentrum Berlin, Germany; Jonas 

Herbst, Friedrich-Alexander Universitä 

Erlangen-Nürnberg, Germany et al. 

B3-334 

B3-649 

oral poster 

B3-746 

oral poster 

B3-755 

oral poster 

B3-810 

oral poster 

B4-33 

B4-97 

B4-223 

B4-224 

Structural approach to mechanical 

properties of glasses 

Lothar Wondraczek, University of 

Erlangen-Nuremberg 

Preparation and Water Uptake of 

Porous Vycor-glass 

F. Somorowski, B. Durschang, M. Kilo, G. 

Sextl; Fraunhofer ISC, Neunerplatz 2, 97082 

Würzburg, Germany 

Improved room temperature 

plasticity of bulk metallic glasses by 

mechanical pre-treatments 

Hamed Sh. Shahabi, Sergio Scudino, Denise 

Beitelschmidt, Uta Kühn, IFW Dresden, Institut 

für Komplexe Materialien, Postfach 27 01 16, 

D-01171 Dresden, Germany et al. 

Lithium diffusion in lithium trisilicate 

glasses 

U. Bauer, Leibniz University, Hannover, 

Germany; A.-M. Welsch, Leibniz University, 

Hannover, Germany; H. Behrens, Leibniz 

University, Hannover, Germany; S. Roß, Leibniz 

University, Hannover, Germany; 

Phase field modeling of shear band 

formation in bulk metallic glasses 

M. Fleck, University of Bayreuth, Bayreuth, 

Germany; 

H. Emmerich, University of Bayreuth, Bayreuth, 

Germany; 



Experimental Study of the 

Dilatometric Behavior of Marval 18 

Steel: Effect of Microstructure 

A. Boudiaf, École Militaire Polytechnique, Bordj 

El-Bahri, Algérie;S. Zeghdane, École Militaire 

Polytechnique, Bordj El-Bahri, Algérie 

Microstructural Models of 

Closed-Cell Foams Adapted to 

Experimental Data 

N.-C. Fahlbusch, Technische Universität 

Darmstadt, Germany; W. Becker, Technische 


Features of 63Ni Isotope 

Mass-Transfer in Polycrystalline Cu 

Under Impulse Shock Compression 

V.F. Mazanko, G.V. Kurdyumov Institute for 

Metal Physics, N.A.S. of the Ukraine, Kyiv 

S.I. Bogdanov, G.V. Kurdyumov Institute for 


V.S. Mihalenkov, G.V. Kurdyumov Institute for 


I.I. Bogdanov, G.V. Kurdyumov Institute for 


Microstructural characterization and 

wear properties of 

Al-4.5%Cu/Al3Mg2 nanocomposite 

prepared by mechanical alloying 

Narguess Nemati, Massoud Emamy 

49




B4-225 

Ab initio analisis of alloying system 

and design of a new generation of 

P\M superalloys 

A. Logacheva, JSC "Kompozit", Korolev, 

Russia; A. Beresnev, JSC "Kompozit", Korolev, 

Russia; I. Razumovskiy, JSC "Kompozit", 

Korolev, Russia; V. Razumovskiy, JSC 

"Kompozit", Korolev, Russia 

B4-493 

Effects of Ternary Additions on the 


Properties of Directionally-Solidified 

MoSi2/Mo5Si3 Eutectic Composites 

K. Fujiwara, Kyoto university, Japan; Y. Sasai, 

Kyoto university, Japan; K. Kishida, Kyoto 

university, Japan; H. Inui, Kyoto university, 

Japan 

B4-769 

Magnetic Micro- and Nanostructures 

of Unalloyed Steels observed by 

Magnetic Force Microscopy 

L. Batista, Fraunhofer-IZFP, Saarbrücken, 

Germany; U. Rabe, Fraunhofer-IZFP und 

Universität des Saarlandes, Saarbrücken, 

Germany; S. Hirsekorn, Fraunhofer-IZFP, 


B4-234 

B4-283 

B4-286 

B4-368 

B4-408 

B4-411 

B4-413 

B4-445 

Ceramic Short Fiber Reinforced Al 

Alloy Composite Piston For 

Automobile Engines In China 

Wu shenqing,School of Materials Science & 

Engineering, Southeast 

University,Nanjing,China;Li Jun,School of 

Materials Science & Engineering, Southeast 

University,Nanjing,China 

Probing Nanomechanical Properties 

of Micro- and Nanofibers by AFM 

Bending Experiments 

D. Kluge, University of Bayreuth, Bayreuth, 

Germany; J. C. Singer, University of Bayreuth, 

Bayreuth, Germany; H.-W. Schmidt, University 

of Bayreuth, Bayreuth, Germany; A. Fery, 

University of Bayreuth, Bayreuth, Germany; 

Microstructural evolution and 

mechanical properties of 

Ti-10V-2Fe-3Al during incremental 

forming 

S. Winter, Chemnitz University of Technology, 

Germany; S. Fritsch, Chemnitz University of 

Technology, Germany; M. F.-X. Wagner, 

Chemnitz University of Technology, Germany 

Particularities of ceramic materials 

with volcanic tuff contents 

E.Albert, University of Medicine and pharmacy, 

Tirgu Mures, Romania; B.Albert, Babes-Bolyai 

University,Cluj, Romania 

Specificity of aluminum alloy 

deformation under the condition of 

dynamic non-equilibrium loading 

process 

M.Chausov, A.Pylypenko, V.B.Berezin, 

National University of Life and Environmental 

Sciences of Ukraine,Kyiv, Ukraine;V. 

Hutsaylyuk,Military University of 

Technology,Warsaw,Poland et al. 

Numerical modeling of the transient 

dynamic loading of elastic-plastic 

rectangular plate 

V. Hutsaylyuk,Military University of 

Technology,Warsaw,Poland;H.Sulym,Bialysto 

k Technical University,Bialystok, Poland;I. 

Turchyn,Ivan Franko National University of 

Lviv,Lviv,Ukraine et al. 

Requirements In Service Imposed To 

Materials For Friction Couplings 

Ilie BUTNARIU , Antoniu CERNIANU , Ioana 

Butnariu, Dana Butnariu 

Studies of Properties of Fasteners of 

ITER Magnet Support 

D.A.Kang,Southwestern Institute of 

Physics,Chengdu,China;P.Y.Lee,Southwestern 

Institute of Physics,Chengdu,China 

B4-543 

B4-578 

B4-590 

B4-631 

B4-706 

B4-727 

B4-752 

Severly Twinned Microstructures in 

Pure Copper 

A. Kauffmann, IFW Dresden, Dresden, Germany; 

D. Geissler, IFW Dresden, Dresden, Germany; 

T. Marr, IFW Dresden, Dresden, Germany; 

J. Freudenberger, IFW Dresden, Dresden, 

Germany; 

J. Eckert, IFW Dresden, Dresden, Germany et al. 

Fibre-reinforced Structures in 

Architecture 

A. Ehrlich, S. Gelbrich, L. Kroll, H. Funke, TU 

Chemnitz, Professur Strukturleichtbau und 

Kunststoffverarbeitung, Chemnitz, Deutschland; 

M. Pfalz, Fiber-Tech Group, Chemnitz, 

Deutschland; 

Temperature Dependent Elastic 

Modulus of a Novel Alumina-Based 

Refractory 

E. Skiera, Forschungszentrum Jülich GmbH, 

Jülich, Germany 

A. Böhm, Forschungszentrum Jülich GmbH, 


J. Mönch, Forschungszentrum Jülich GmbH, 


S. Dudczig, Technical University Bergakademie 

Freiberg, Freiberg, Germany 

Influence of a Casting Layer on the 

Creep Behaviour of Thin-Walled 

Nickel-Base Superalloy IN100 

J. Strößner, Metals and Alloys, University 

Bayreuth, Germany; C. Konrad, Metals and 

Alloys, University Bayreuth, Germany; M. 

Brunner, Metals and Alloys, University 


Cobalt-base superalloys in the 

Co-Al-W-Ti system 

C. Zenk, Department of Materials Science and 

Engineering - Institute 1, University of 

Erlangen-Nürnberg, Germany et al. 

Mechanical behaviour of 

aluminium-nanodiamond 

composites prepared by SPS 

sintering process for armour 

applications 

C. Terner Institut franco-allemand de recherches 

de Saint-Louis, France, Saint-Louis; E. Barraud, 

Institut franco-allemand de recherches de 

Saint-Louis, France, Saint-Louis et al. 

Formation of a Structure and 

Properties of Aluminum-Silicon 

Alloys Under the Action of the 

High-Intensity Pulse-Magnetic Field 

D. Chernikov, Samara State Aerospace 

University, Samara, Russia 

B4-913 

B4-968 

B4-1099 

B4-1138 

B5-103 

oral poster 

B5-118 

oral poster 

Chain Dynamics and Aggregation 

of Thermoreversible Crosslinking 

Supramolecular Polymers with 

Multiple Hydrogen-bonding 

Wei Wu,East China University of Science and 

Technology,Shanghai, China; 

Yujie Chen,East China University of Science and 

Technology,Shanghai, China; 

Manfred H. Wagner, Technische Universität 

Berlin, Berlin, Germany 

Approaches to Assess the Fatigue 

Life of Turbine Airfoils 

Markus Fried, MTU Aero Engines Munich, 

Germany 

Processing and mechanical 

properties of polymer-infiltrated 

ceramics 

V. Steier, Fraunhofer Institute for Mechanics of 

Materials IWM, Freiburg, Germany; 

C. Koplin, Fraunhofer Institute for Mechanics of 

Materials IWM, Freiburg, Germany et al. 

Corrosion Behaviour of Biomedical 

17-4 PH Stainless in Simulated Body 

Fluid and Artificial Saliva 

Environments 

I. Mutlu, 

Istanbul University, Department of Metallurgical 

and Materials Engineering, Istanbul, Turkey; 

E. Oktay 

Istanbul University, Department of Metallurgical 

and Materials Engineering, Istanbul, Turkey 


Failure mode specific fatigue testing 

of CFRP under VHCF-loading 

M. Gude, W. A. Hufenbach, I. Koch, R. 

Koschichow 

TU Dresden, Institut für Leichtbau und 


Very High Cycle Fatigue Behaviour 

of Fibre-Reinforced Composites: An 

alternative Experimental Approach 

T. J. Adam, P. Horst, Institute of Aircraft Design 

and Lightweight Structures, Technische 


Hermann-Blenk-Straße 35, D-38108 

Braunschweig 

50




B5-392 

oral poster 

B5-428 

oral poster 

B5-471 

oral poster 

B5-525 

oral poster 

B5-561 

oral poster 

B5-609 

oral poster 

B5-826 

oral poster 

Early damage detection of a 

martensitic turbine blade steel during 

VHCF with superimposed mean 

stresses using nonlinear ultrasonic 

analysis 

T. Beck, S. Kovacs, D. Ernstes, L. Singheiser, 

Forschungszentrum Jülich, Germany 

Characterization of damage 

accumulation in the Very High Cycle 

Fatigue (VHCF) regime in a stable 

and a metastable austenitic stainless 

steel based on the resonant behavior 

A. Grigorescu, Univeristy of Siegen, Siegen, 

Germany; M. Zimmermann, Univeristy of 

Siegen, Siegen, Germany; H.-J. Christ, 

Univeristy of Siegen, Siegen, Germany; P. 

Hilgendorff, Univeristy of Siegen, Siegen, 


Simulation of Damage 

Accumulation in the Very High 

Cycle Fatigue (VHCF) Regime Based 

on the Resonant Behavior 

P. Hilgendorff, C.-P. Fritzen, A. Grigorescu, M. 

Zimmermann, H.-J. Christ, University of 

Siegen, Germany 

2D and 3D analysis of the VHCF 

process in nodular cast iron 

W.Tillmann, TU Dortmund, Germany; N.B. 

Anar, RIF e.V., Dortmund, Germany; J. Nellesen, 

RIF. e.V., Dortmund, Germany; H.G. 

Rademacher, RIF e.V., Dortmund, Germany; G. 

Fischer, RIF e.V., Dortmund, Germany 

Application of crystal plasticity to 

cyclic loading and comparison to 

conventional plasticity 

Martin Boeff, ICAMS (Ruhr University), 


Steffen Brinckmann, ICAMS (Ruhr University), 


Alexander Hartmaier, ICAMS (Ruhr University), 


Three-Dimensional Aspects of Crack 

Initiation and Propagation during 

VHCF-Loading of Duplex Steel 

A. Giertler, Faculty of Engineering and 

Computer Science, University of Applied 

Sciences Osnabrück, 49009 Osnabrück, 

Germany 

K. Istomin, Institut für Physik, Universität 

Siegen, 57072 Siegen, Germany 

B. Dönges, Institut für Werkstofftechnik, 

Universität Siegen, 57068 Siegen, Germany 

Investigation of high- and 

very-high-cycle-fatigue in 

fiber-reinforced-plastics with 

X-Ray-Refractography 

Dr.-Ing. V. Trappe 

Dipl.-Ing. H.-P. Ortwein 

BAM Federal Institute for Material Research and 

Testing 

Division 5.3 - Mechanical Behaviour of 

Polymers 

Unter den Eichen 87, D-12205 Berlin 

B5-831 

oral poster 

B5-853 

oral poster 

B5-1146 

B6-142 

B6-391 

B6-409 

B6-500 

B6-550 

Experimental investigation of the very 

high cycle fatigue behaviour of fibre 

reinforced composites 

P. Lorsch, Institute of Composite Structures and 

Adaptive Systems, German 

Aerospace Center (DLR), Lilienthalplatz 7, 

D-38108 Braunschweig et al. 

A discrete dislocation dynamics 

study of irreversibility under high 

frequency cyclic loading of 

micrometer sized grains 

J. Senger, D. Weygand 

Ultrasonic test facility for Very High 

Cycle Fatigue of carbon fiber 

reinforced polymers 

D. Backe1, F. Balle1, D. Eifler1, T.B. Helfen2, 3, 

U. Rabe2, 3, S. Hirsekorn3, C. Boller2, 3 

1 Institute of Materials Science and 

Engineering (WKK), 

University of Kaiserslautern, P.O. Box 3049, 

67653 Kaiserslautern, Germany 

2 Chair of Nondestructive Testing and 

Quality Assurance, Saarland University 


Polymer-Metal Hybrid Structures 

Based on Polydiphenylamine and 

Co Nanoparticles. 

G.Karpacheva, A.V.Topchiev Institute of 

Petrochemical ZSynthesis RAS; S.Ozkan, 

A.V.Topchiev Institute of Petrochemical 

Synthesis RAS. 

Formability of Aluminum 

Magnesium Compounds 

A. Feuerhack, Chemnitz University of 

Technology; Department of Mechanical 

Engineering, Chair Virtual Production 

Engineering, Chemnitz, Germany; C. Binotsch, 

Chemnitz University of Technology et al. 

Damage behaviour of 

textile-reinforced composite 

compliant elements under 

shear-force-free bending load 

N. Modler, K.-H. Modler, W. A. Hufenbach, J. 

Jaschinski, M. Zichner, U. Hanke, J. Ehlig, 

Technische Universität Dresden, Dresden, 

Germany 

Effect of integrated sensor networks 

on the mechanical behaviour of 

textile-reinforced thermoplastics 

W. Hufenbach, F. Adam, W.-J. Fischer, A. 

Kunadt, D. Weck 

Production and characterization of 

tinsel using hard and brittle metal 

alloys 

J. Nachtrab, LEONI Bordnetz-Systeme GmbH, 

Kitzingen, Germany; F. Beuscher, LEONI 

Bordnetz-Systeme GmbH, Kitzingen, Germany; 

A. Goebel, Zentrum für Angewandte 

Energieforschung Bayern, Würzburg, Germany 

et al. 

B6-566 

B6-598 

B6-811 

B6-951 

B6-971 

B6-974 

B6-1078 

B6-1157 

Ultrasound flow sensor based on 

arrays of piezoelectric transducers 

integrated in a composite 

A. Kunadt, Technische Universität Dresden, 

Dresden, Germany; G. Pfeifer, Technische 

Universität Dresden, Dresden, Germany 

Development and investigation of an 

active textile-reinforced thermoplastic 

leaf spring with integrated sensor 

networks 

W. Hufenbach, P. Kostka, B. Maron, D. Weck, 

K. Holeczek, M. Thieme, ILK TU-Dresden, 


Textile reinforced thermoplastics for 

crash and impact tolerant 

lightweight structures 

W. Hufenbach, Technische Universität Dresden, 

Institute of Lightweight Engineering and 

Polymer Technology (ILK), Dresden, Germany 

et al. 

Investigation of the Micromechanical 

Behavior of Fibre Reinforced Epoxy 

With a Semi-Automatic Phase Shiftig 

Method 

S. Blobel, Dr.-Ing. K. Thielsch, TU Dresden, 


Prof. Dr.-Ing. habil. V. Ulbricht, TU Dresden, 


Failure behaviour of advanced seam 

structures for cfrp-aluminium 

connections 

J. Schumacher, IWT Stiftung Institut für 

Werkstofftechnik, Bremen, Germany; H. Bomas, 

IWT Stiftung Institut für Werkstofftechnik, 

Bremen, Germany; 

H.-W. Zoch, IWT Stiftung Institut für 


The experimental characterisation 

and simulation of the mechanical 

behaviour of an epoxy adhesive for 

bonding textile-reinforced 


J.-S. Pap, Technische Universität Dresden, 

Institute of Surface and Manufacturing 

Technology, Dresden, Germany; M. Kästner, 

Technische Universität Dresden, Institute of 

Solid Mechanics, Dresden, Germany et al. 

On the size-dependent failure 

mechanism of short fibre reinforced 

composites 

T. Xiao, Helmholtz-Zentrum Geesthacht, 

Geesthacht, Germany; 

I. Scheider, Helmholtz-Zentrum Geesthacht, 


N. Huber, Helmholtz-Zentrum Geesthacht, 

Geesthacht, Germany et al. 

Solar-Driven Self-Powered Gas 

Sensors: A Novel Platform for 

Autonomous Nanodevices 

A.E. Gad, Institute of Inorganic Chemistry, Chair 

of Inorganic and Materials Chemistry, 

University of Cologne, D-50939 Cologne, 


51




B7-340 

B7-373 

B7-501 

oral poster 

B7-509 

oral poster 

B7-586 

B7-698 

B7-1036 

B7-1043 



Grain refinement process in Gum 

Metal during cold working 

S. Kuramoto, Toyota Central R&D Labs., Inc., 

Nagakute, Japan; T. Furuta, Toyota Central 

R&D Labs., Inc., Nagakute, Japan; T. Ohsuna, 

Toyota Central R&D Labs., Inc., Nagakute, 

Japan et al. 

Low Temperature Plasticity of Bulk 

Nanocrystalline Titanium 

R.V. Smolianets, V.A. Moskalenko, A.R. 

Smirnov 

The effect of scaling up 

equal-channel angular pressing on 

billet homogeneity 

Hunger, S., Chemnitz University of 


Hockauf, M., Chemnitz University of 


Wagner, M. F.-X., Chemnitz University of 


Dynamic Compaction Resistance 

Sintering: a new flash sintering 

process for making advanced 

materials 

P. Acquier, Institut franco-allemand de 

recherches de Saint-Louis – ISL, 5 rue du 

Général Cassagnou, 68301 Saint-Louis Cedex, 

France et al. 

Microstructure Evolution in Steel 

Matrix Composite 

C. Segel, TU Bergakademie Freiberg Institute of 

Materials Engineering, Germany; A. Weidner, TU 

Bergakademie Freiberg Institute of Materials 

Engineering, Germany et al. 

Sintering of nanostructured 

Molybdenum by SPS in order to 

improve the mechanical properties 

F. Moitrier,Institut franco-allemand de 

recherches de Saint-Louis, France Saint-Louis; S. 

Lemonnier,Institut franco-allemand de 

recherches de Saint-Louis, France Saint-Louis et 

al. 

EBSD and STEM on aluminum 

alloys subjected to severe plastic 

deformation 

D. Dietrich, M. Hockauf, P. Frint, A. Schulze, M. 

F.-X. Wagner, T. Lampke all from: Chemnitz 

University of Technology, Institute of Materials 

Science and Engineering, Erfenschlager Str. 73, 

09125 Chemnitz, Germany 

Investigation into the new route for 

ECAP process by FEM method 

F.Ahmadi,Isfahan University of 

technology,Isfahan, Iran; M.Farzin,Isfahan 

university of technology, Isfahan, Iran; 

B7-1164 

B8-1163 

B9-6 

B9-30 

B9-258 

B9-295 

Layer-by-Layer Assembled 

Sulfonated-Graphene/Polyaniline 

Nanocomposite Films: Enhanced 

Electrochromic Properties and the 

Mechanism 

Jinlin Lu, Wanshuang Liu, Han Ling, Junhua 

Kong, Guoqiang Ding, Dan Zhou, Xuehong 

Lu*. 

School of Materials Science and Engineering, 

Nanyang Technological University, 50 

Nanyang Avenue, Singapore 639798, 

Sigapore. 


Hydrogen Embrittlement of Carbide 

Free Bainitic Steel for Large Size Ingot 

Cheng CHEN,Yanshan University, 

Qinhuangdao, China； Fucheng 

ZHANG*,Yanshan University, Qinhuangdao, 

China； Bo LV, Yanshan University, 

Qinhuangdao, China&#65307 et al. 


Development of new magnesium 

composites with hybrid nanoscale 

reinforcements 

Sankaranarayanan S. 1*, Jayalakshmi S. 1, 

Abdelmagid S. H. 2 and Manoj G. 1 

1 Department of Mechanical Engineering, 

National University of Singapore (NUS), 

Singapore 117 576. 

2 Mechanical and Industrial Engineering 

Department, Qatar University, Doha, State of 

Qatar. 

Surface Blotching in Al Alloy 

T.A. Bennett, Materials Science & Engineering 

Department, Ghent University, Technology 

Park, B9052 Ghent, Belgium; R.H. Petrov, 

Materials Science & Engineering Department, 

Ghent University, Technology Park, B9052 

Ghent et al. 

Heterogeneous precipitates in 2024 

aluminum alloy characterized by 

using STEM-HAADF 3D tomography 

and HRTEM 

Yanqing Yang,State Key Lab of Solidification 

Processing, Shaanxi Materials Analysis and 

Research Center, Northwestern Polytechnical 

University, Xi’an, P.R. China et al. 

Production of customized hybrid 

porous structures by powder 

metallurgy of Ni59Zr20Ti16Si2Sn3 

gas-atomized glassy powders 

J. Y. Kim, S. Scudino, U. Kühn and J. Eckert, 

IFW Dresden, Institut für Komplexe Materialien, 

Postfach 270116, D-01171 Dresden, Germany 

et al. 

B9-1030 

B9-1158 

B9-1168 

B9-1169 

Microstructures by Electro Pulse 

Treatment in aluminium alloys 

Kyung-Hyun Kim and Jung-Moo Lee 

1Department of light Metals, 

Korea Institute of Materials Science(KIMS) 

797 Changwondaero,Changwon, Korea 

Fax: + 82 55 280-3599; email: 

khkim@kims.re.kr 

Enhanced Mechanical Response of 

Hierarchical Mg Nano-Composite as 

a Function of Temperature 

Meisam K. Habibi1,*, Qian Min2, Abdelmajid 

S. Hamouda3 and Manoj Gupta1 

Precipitation behavior in light weight 

Al-Li-Cu high performance alloys 

P. Neibecker, J. Leese, M. Kreissle, K. Kolotzek, 

F. Haider, Department of Physics, University of 

Augsburg, Augsburg, Germany; T. Al-Kassab, 

King Abdullah University of Science and 

Technology, Thuwal, Saudi Arabia 

Determination of Tensile Properties of 

Titanium Gr.4 using Micro-Tensile 

Test 

M. Mare ová, J. D ugan, R. Procházka, P. 

Konopík, COMTES FHT a.s., Dobrany, Czech 

Republic; 

52


Topic: C - Processing 

C1-19 

C1-53 

C1-222 

C1-273 

C1-510 

C1-790 

C1-798 


Composites 

Fabrication of Ceramic Matrix 

Composites Ti3SiC2/SiC via 

SHS-Compaction of Non-Powder 

Layered Structure 

P. Istomin, A. Nadutkin, V. Grass (Sp), Russian 

Academy of Sciences, Syktyvkar (Russian 

Federation) 

Preparation of Ti3SiC2 Containing 

Materials via Silicidation of Titanium 

Carbides or Oxycarbides by 

Gaseous SiO 

E. Istomina, P.Istomin, V.Grass, A.Nadutkin, 

Institute of Chemistry at the Komi Scientific 

Center of the Ural Branch of the Russian 

Academy of Sciences, Syktyvkar, Russian 

Federation 

Self-propagating high-temperature 

combustion synthesis of TiC/Al2O3 

and TiC/MgO ceramic–matrix 

composites. 

H. Boutefnouchet,Laboratory of magnetism and 

spectroscopy of solids (LM2S) Badji Mokhtar 

University. Annaba, Algeria;C. Curfs, European 

Synchrotron Radiation Facility (ESRF). 

Grenoble, France et al. 

Novel method of Preparation of 

Conductive Composites Based on 

Polyaniline. 

G.Karpacheva, A.V.Topchiev Institute of 

Petrochemical Synthesis RAS, Moscow, Russia; 

A.Orlov, A.V.Topchiev Institute of 

Petrochemical Synthesis RAS, Moscow, Russia 

et al. 

Characterization of Li-ion battery 

separators - initial results 

S. Jaiser, Karlsruhe Institute of Technology, 

Karlsruhe, Germany; P. Scharfer, Karlsruhe 

Institute of Technology, Karlsruhe, Germany; 

W. Schabel, Karlsruhe Institute of Technology, 


Iron-doped thin titanium dioxide 

films synthesized with the radio 

frequency plasma enhanced 

chemical vapour deposition 

technique 

S. Owczarek, Technical University of Lodz, 

Institute of Materials Science and Engineering, 

Lodz, Poland; A. Sobczyk-Guzenda, Technical 

University of Lodz, Institute of Materials 

Science and Engineering, Lodz, Poland et al. 

Plasma enhanced chemical vapor 

deposition of materials for 

interference optical filters 

S. Owczarek, Technical University of Lodz, 


Lodz, Poland; J. Kowalski, Technical 

University of Lodz, Institute of Materials 

Science and Engineering, Lodz, Poland et al. 

C1-851 

C1-984 

C1-1080 

C1-1124 

C1-1167 

C2-137 

C2-606 

Far-infrared Reflection, ATR and 

Micro-Raman Study of 

Nanocomposites Based on Porous 

III-V Semiconductors 

T. Barlas, N.Dmitruk, N. Kotova,Institute for 

Physics of Semiconductors, National Academy 

of Sciences of Ukraine, 45 Nauki Prospect, 

03028 Kyiv, Ukraine et al. 

Application of Material Science and 

Engineering in Ophthalmic Practice. 

Eugene E.Sidorenko, State Medical University, 

Moscow, Russia 

Alvina D.Musina, Russian Institute of Eye and 

Plastic Surgery, Moscow, Russia 

Features of Electrochemical Reactions 

in “CH3CN (Acetonitrile) - Metallic 

Electrode” System at Electric Field 

Strength of 200 - 2500 V/cm and 

Formation of CxNy Carbon Nitride 

and Other Coatings, Thin 

Amorphous Films and 

A. 

Nano-dimensional 

Chekhovsky, M. Krasovskyi, 

Powders 

V. Lavrenko, 

A. Ragulya, Institute for Problems of Materials 

Science, Kiev, Ukraine 

Effect of reinforcement particle size 

and weight percent on thehardness 

and compressive strength of 

Al-4.5wt.% Cu + TiC nanocomposite 

Narguess Nemati, Masoud Emamy, Ashkan 

Zolriasatein, School of metallurgical and 

materials Engineering, College of Engineering 

University of Tehran 

Light Weight Debris Protector for 

SSPS by Oblique Collision 

Ichiro Shiota, Koji Tanaka, Masahiko Kato, 

Hitoshi Kohri, 

Atsushi Yumoto, Takayoshi Yagasaki, Susumu 

Sasaki 



Physical properties and optical 

application of poly(HEMA) 

containing diphenylsilanediol 

Dong-Hyun Kim, Daebul university, Jeonnam, 

South Korea; Tae-Hun Kim, Baekseok 

university, Chungnam, South Korea; A-Young 

Sung, Daebul university, Jeonnam, South 

Korea; 

Direct Laser Melting of 

Shape-memory Alloy NiTi Actuators 

R. Hagemann, F. Pape, C. Nölke, S. Kaierle, V. 

Wesling, H. Haferkamp, Laser Zentrum 

Hannover e.V., Hanover, Germany 

C2-1002 

C3-3 

C3-206 

oral poster 

C3-208 

oral poster 

C3-212 

oral poster 

C3-294 

Effects of Ti Addition on 

Copper/Diamond Functionally 

Graded Grinding Wheel for Drilling 

CFRP Fabricated by the Centrifugal 

Sintered-Casting Method 

T. Kunimine,Nagoya Institute of Technology, 

Nagoya, Japan; 

M. Shibuya, Nagoya Institute of Technology, 

Nagoya, Japan; 

H. Sato, Nagoya Institute of Technology, 

Nagoya, Japan et al. 

Joining 


Characterization of Dissimilar 

Inconel 617/304H Stainless Steel 

Welds 

E. Farahani (Sp), Pars Oil and Gas company, 

Tehran (Iran); M. Shamanian, F. Ashrafizadeh, 

Isfahan University of Technology (Iran); P. 

Mowlaie, Pars Oil and Gas company, Tehran 

(Iran) 

Statistical Analysis of the Tensile 

Strength in Aluminium 2024-T351 

/ Polycarbonate FricRiveting Joints 

C.F.Rodrigues,Graduate Program in Materials 

Science and Engineering (PPG-CEM), Federal 

University of São Carlos (UFSCar), São 

Carlos/SP, Brazil 

S.T. Amancio-Filho,Helmholtz-Zentrum 

Geesthacht (HZG), Institute of Materials 

Research, Materials Mechanics, Advanced 

Mechanical performance of 

aluminium 6181-T4 / CF-PPS 

composite hybrid joints produced 

by friction spot joining 

J.V. Esteves, Graduate Program in Materials 

Science and Engineering (PPG-CEM), Federal 

University of São Carlos (UFSCar), São 

Carlos/SP, Brazil 

S.T. Amancio-Filho, Helmholtz-Zentrum 


Research, Materials Mechanics, Solid State 

Friction Spot Joining of AA2024-T3 

/ CF-PPS Composite: A Feasibility 

Study 

S.M. Goushegir, Helmholtz-Zentrum Geesthacht 

(HZG), Institute of Materials Research, Materials 

Mechanics, Solid State Joining Processes, 

Advanced Polymer-Metal Hybrid Structures, 


S.T. Amancio-Filho, Helmholtz-Zentrum 


Characterization of a welded joint in 

steel API.5L.X70 having undergone 

successive repairs 

B. MAAMACHE,Division de Métallurgie et 

Mécanique - Centre de soudage et contrôle, 

chéraga Alger Algérie; Youcef. YAHMI,Division 

de Métallurgie et Mécanique - Centre de 

soudage et contrôle, chéraga Alger Algérie et al. 

53



C3-420 

oral poster 

C3-563 

oral poster 

C3-709 

oral poster 

C3-781 

oral poster 

C3-1123 

oral poster 

C3-1132 

Thermal Influences on the Joining 

Behavior of Partly Aromatic High 

Temperature Polyamide (PA6/6T) in 

Assembly Molding 

M. Vetter,Institute of Polymer Technology, 

University Erlangen-Nueremberg; D. Drummer, 

Institute of Polymer Technology, University 

Erlangen-Nueremberg 

Development of a Low-Melting-Point 

Aluminum Base Filler Metal with 

Titanium Addition 

Prof. W. Tillmann, Ch. Liu, L. Wojarski, TU 

Dortmund, Dortmund, Germany 

Investigation on joining and 

materials for highly stressed fuel 

processor components in fuel cell 

systems 

Ebersbach, T.; Sändig, S., 

Günter-Köhler-Institut für Fügetechnik und 

Werkstoffprüfung, Jena, Germany 

Pasdag, O.; Steffen, M.; Zentrum für 

BrennstoffzellenTechnik GmbH, Duisburg, 

Germany 

Naji, A.; Schütze, M. et al. 

Joining of Parts Made of Dissimilar 

Materials Using Magnetic-Pulse 

Technology 

A. Lazareva, Samara State Aerospace University, 

Samara, Russia. 

Grain Orientation in Welded 

Industrial Aluminum 

1Z. Boumerzoug, 1N. Chérifi and 2T. Baudin 

1LMSM, University of Biskra, B.P. 145, 

Biskra-07000- Algeria 

2Université Paris-Sud 11, UMR8182, ICMMO, 

Laboratoire de Physico-Chimie de l’Etat Solide, 

Orsay, F-91405 

Residual Stress Study by X-ray 

Diffraction Method in Welded X70 

Pipeline Steel 

Z. Boumerzoug1, K. Digheche2, and V. Ji3 

1Laboratory of semiconductor and metallic 

materials, Biskra University, B.P. 145, 

Biskra-07000- Algeria. 

2Department of Chemical Industry, Biskra 

University, B.P. 145, Biskra-07000- Algeria. 

3 ICMMO/LEMHE, Université Paris-Sud, bat. 

410, Orsay-91405- France 

C4-139 

C4-216 

C4-237 

C4-267 

C4-290 

C4-387 

Development of S-phase in Ni-based 

alloys 

M. Fonovic, Max Planck Institute for Intelligent 

Systems (formerly Max Planck Institute for 

Metals Research), Stuttgart, Germany A. 

Leineweber, Max Planck Institute for Intelligent 


Metals Research), Stuttgart, Germany , E.J. 

Mittemeijer Max Planck Institute for Intelligent 


Synthesis and characterization of the 

thin films LaNi1-xFexO3 cathode 

and Delta-Bi2O3 doped Yb2O3 

electrolyte for solid oxide fuel cell 

application 

Nergis Bilir1, Ozge Aksan1, Handan Özlü1, 

Soner Çakar1, Esra Korkmaz2, Orhan 

Turkoglu1* 

1Department of Chemistry, Erciyes University, 

38039 Kayseri, Turkey 

2Department of Chemistry, Bozok University, 

66200 Yozgat, Turkey 

A Study of Enhanced Corrosion and 

Wear Resistance of the Sintered Steel 

Parts via Chromizing Treatment 

Jae-Hoon Lee,Incheon R&D Division, Korea 

Institute of Industrial Technology (KITECH) 

7-47, Songdo-Dong, Yeonsu-Gu, Incheon, 

406-840, R. O. Korea et al. 

Electrochemical Coatings for Carbon 

Fibers 

M. Nier, Chemnitz University of Technology, 

Chemnitz, Germany; M. Trautmann, Chemnitz 

University of Technology, Chemnitz, Germany; 

I. Scharf, Chemnitz University of Technology, 


Controlling Carbon Concentration of 

Steel by Atmosphere Analyzing in 

Direct Carburizing 

M. Okumiya, Toyota Technological Institute, 

Nagoya, JAPAN; H. Fujii, Graduate Student of 

Toyota Technological Institute, Nagoya, 

JAPAN; J. H. Kong, Toyota Technological 

Institute, Nagoya, JAPAN et al. 

Plasma enhanced aerosol-gel 

deposition of Al2O3 coatings 

B.Pietrzyk, H.Szymanowski, S.Miszczak, 

D.Kucharski, Technical University of Lodz, 


Lodz, Poland; 

C4-517 

C4-519 

C4-591 

C4-681 

C4-796 

C4-932 

On the influence of clusters in the 

healing of surface scratches in 

ionomers 

J.M. Vega, 1) 2), S.J. Garcia, 2), S. van der 

Zwaag 2), 

1: Material innovation institute, Mekelweg 2, 

2600 GA, Delft, The Netherlands. 

2: Novel Aerospace Materials Group, Faculty of 

Aerospace Engineering, 

Delft University of Technology, Kluyverweg 1, 

2629 HS, Delft, The Netherlands. 

TiO2-deposition on metal-coated 

glass flakes and spheres via 

Microwave Assisted Liquid Phase 

Decomposition (MA-LPD) 

B. Scharfe, Chair of Materials Processing, 

University of Bayreuth, Germany; M. 

Willert-Porada, Chair of Materials Processing, 

University of Bayreuth, Germany 

Fe-Co-Hf-N/TiN multilayer coatings 

with combined wear resistant and 

ferromagnetic properties for in-situ 

high frequency sensor applications 

K. Krüger, Karlsruhe Institute of Technology 

(KIT), 76344 Eggenstein-Leopoldshafen, 

Germany; K. Seemann, Karlsruhe Institute of 

Technology (KIT), 76344 

Eggenstein-Leopoldshafen, Germany et al. 

Efficiency of UV sintering on 

screen-printed coatings on several 

substrates for light absorption 

management applications 

A. Monier,LISE (Laboratory for Electron 

Spectroscopie) , Facultés Universitaires 

Notre-Dame de la Paix (FUNDP), 61 rue de 

Bruxelles, B-5000 Namur, Belgium et al. 

Tribology of Textiles: Challenging 

carbon fibre processing 

C. Rosiepen, Institut für Textiltechnik der 

RWTH Aachen, RWTH Aachen University, 

Aachen, Germany; T. Beck, Institut für 

Textiltechnik der RWTH Aachen, RWTH Aachen 

University, Aachen, Germany et al. 

Feasibility of formation of surfce 

alloying layer containing Al-Fe-Si on 

Aluminium and study of its 

hardness and wear properties 

A. Ardeshiri, Science And Research Branch Of 

Islamic Azad university College Of material 

Engineering, Tehran, Iran; A. Safaie, Tehran 

University College Of material Engineering, 

Tehran, Iran et al. 

C4-109 


Development of innovative 

nanoparticle-based protective 

coatings for the production of 

high-strength steel compounds by 

press-hardening 

M. Yekehtaz, DECHEMA Research Institute, 

Frankfurt am Main, Germany; C. Klesen, Institut 

für Eisenhüttenkunde der RWTH Aachen, 

Aachen, Germany; S. Benfer, DECHEMA Research 

Institute, Frankfurt am Main, Germany et al. 

C4-410 

NiTi-coating of carbon fibres 

M. Trautmann, M. Nier, D. Nestler, D. Nickel, T. 

Mäder, B. Wielage, Chemnitz University of 

Technology, Chemnitz, Germany 

C4-947 

Adsorption and surface chemistry of 

corrosion protecting organic acids 

on magnesium alloy AZ31 and 

MgO single crystals 

Sandra Szillies, University of Paderborn, 

Paderborn/Germany; 

Peter Thissen, University of Texas at Dallas, 

Richardson/USA; 

Nicole Fink, Max-Planck-Institut für 

Eisenforschung GmbH, Düsseldorf/Germany et 

al. 

54



C5-235 

C5-236 

C5-404 

C5-459 

oral poster 

C5-532 

C5-818 

oral poster 

C5-819 

oral poster 

C5-906 

oral poster 

Laser and Plasma Processing 

Methods 

Study of the Role of Activated 

Nitrogen Species in Double Screen 

Plasma Nitriding by Using Optical 

Spectroscopic Analysis 

Sung-Chul Lim,Incheon R&D Division, Korea 

Institute of Industrial Technology 

(KITECH),7-47, Songdo-Dong, Yeonsu-Gu, 

Incheon, 406-840, R.O.Korea et al. 

A Study on Properties of Corrosion 

Protection of Active Plasma Nitrided 

Austenitic Stainless Steels 

Sang-Gweon Kim,Incheon R&D Division, Korea 

Institute of Industrial Technology 

(KITECH),7-47, Songdo-Dong, Yeonsu-Gu, 

Incheon, 406-840, R. O. Korea et al. 

Reactive magnetron sputtering and 

plasma decomposition of 

non-volatile precursors for the 

preparation of mixed oxide thin films 

J. Gil-Rostra, F. Yubero, A. Barranco, A.R. 

González-Elipe, Instituto de Ciencia de 

Materiales de Sevilla (CSIC-Uni. Sevilla). 

Sevilla. Spain 

Laser Synthesis of Eutectic Ceramic 

Oxide Coatings 

I. de Francisco, Instituto de Ciencia de 

Materiales de Aragón (CSIC-Univ. Zaragoza), 

Zaragoza, Spain; A. Vegas, Instituto de 

Química-Física Rocasolano (CSIC), Madrid, 

Spain et al. 

Higly stable hydrophobic plasma 

polymerized thin films from 

organosilicon compounds on glass 

surfaces 

E. Grimoldi, Dipartimento di Fisica “G. 

Occhialini”, Università degli Studi di 

Milano-Bicocca, Milano, ITALY; 

S. Zanini, Dipartimento di Fisica “G. 


Milano-Bicocca, Milano, ITALY et al. 

Laser induced surface modifications 

on BaZrO3 perovskite ceramics 

V.V.Lennikov, L.A.Angurel, G.F. De La Fuente 

In situ laser assisted synthesis of 

BSCCO-2212 textured 

superconductors 

V.V.Lennikov, L.A.Angurel, G.F. De La Fuente 

Fabrication of metal derived 

waveguides by Laser Ablation 

Backwriting 

F. Rey-García,U. A. “Microóptica y Óptica 

GRIN”, CSIC-ICMA, Departamento de Física 

Aplicada, Facultade de Óptica e Optometría y 

Facultade de Física, Universidade de Santiago 

de Compostela, Campus Sur s/n E-15782 et al. 

C5-911 

oral poster 

C5-941 

oral poster 

C5-1089 

oral poster 

C6-133 

C6-211 

C6-523 

C6-572 

Fabrication and Characterisation of 

waveguides fabricated by Laser 

Zone Melting 

F. Rey-García,1U. A. “Microóptica y Óptica 

GRIN”, CSIC-ICMA, Departamento de Física 

Aplicada, Facultade de Óptica e Optometría y 

Facultade de Física, Universidade de Santiago 

de Compostela, Campus Sur s/n E-15782 et al. 

Nanosecond-laser treatment of Ag 

nanostripes for the fabrication of 

tunable dichroic optical structures 

J.R. Sánchez-Valencia, EMPA, Swiss 

Federal Laboratories for Materials Testing and 

Research (nanotech@surfaces Laboratory), 

Dübendorf, Switzerland; J. Toudert, 

Instituto de Optica, Madrid, Spain et al. 

Wetting Behavior and Growth 

Mechanism of Fluorocarbon Films 

prepared by Plasma Enhanced 

Chemical Vapor Deposition 

A. Terriza, J. Cotrino, M. Macías, F. Yubero, R. 

Alvarez, A.R. González-Elipe 


Synchrotron induced photoelectron 

spectroscopy of solution processed 

and evaporated Spiro-MeOTAD 

films. Electronic structure of 

Spiro-MeOTAD:WO3 codeposits and 

Spiro-MeOTAD/WO3interfaces 

R. Hock, TU Darmstadt, Darmstadt, Germany; T. 

Mayer, TU Darmstadt, Darmstadt, Germany; W. 

Jaegermann, TU Darmstadt, Center of Smart 

Interfaces, Darmstadt, Germany 

SXPS Characterization of Solution 

Processed Bulk Heterojunction 

Donor/Acceptor Model Systems 

J. Maibach, Technische Universität Darmstadt, 

Darmstadt, Germany; E. Mankel, Technische 

Universität Darmstadt, Darmstadt, Germany; T. 

Mayer, Technische Universität Darmstadt, 


Organic Solvent Compatible High-K 

Nanoparticles 

Yanling Gao, Niels Benson, Roland Schmechel, 

Vladimir V. Shvartsman, and Doru C. Lupascu, 

Faculty of Engineering, University of 

Duisburg-Essen, Essen, Germany 

Surface leveling of ultrathin polymer 

and small molecule semiconductor 

films by gravure and flexographic 

printing 

Hans Martin Sauer, Institute of Printing Science 

and Technology, TU Darmstadt, 64289 


Nils Bornemann, Institute of Printing Science 

and Technology, TU Darmstadt, 64289 


Edgar Dörsam, Institute of Printing Science and 

Technology, TU Darmstadt, 64289 Darmstadt, 

C6-573 

C6-575 

C6-668 

C6-682 

C6-703 

C6-704 

C6-714 

C6-894 

Experimental Investigation of the 

Filling and Emptying of Gravure 

Cells 

Nils Bornemann, Technische Universität 

Darmstadt, Darmstadt, Germany; 

Hans Martin Sauer, Technische Universität 

Darmstadt, Darmstadt, Germany; 

Edgar Dörsam, Technische Universität 


Temperature dependent charge 

carrier transport in amorphous 

In2O3-based semiconductor 

deposited from solution 

Silviu Botnaras;, Evonik Industries AG, Marl, 

Germany, Duisburg-Essen University, Duisburg, 

Germany; Dennis Weber, Evonik Industries AG, 

Marl, Germany; Duy-Vu Pham, Evonik 

Industries AG, Marl, Germany et al. 

Ink-jet printing of conducting 

nanoinks: processable at room 

temperature 

Falk von Seggern 

Institute of Nanotechnology, Karlsruhe Institute 

of Technology (KIT), 

Hermann-von-Helmholtz-Platz 1, 76344 


Joint Research Laboratory Nanomaterials, 

Technische Universität Darmstadt and KIT, 

Petersenstr. 32, 64287 Darmstadt, Germany 

Gravure Lab Printing Machine for 

Multilayer Devices 

R. Thieme, TU Darmstadt, Darmstadt, Germany; 

T. Oberle, TU Darmstadt, Darmstadt, Germany; 

E. Dörsam, TU Darmstadt, Darmstadt, Germany 

Impact of solidification conditions on 

film properties of lithium-ion battery 

electrodes 

M. Baunach, Institute of Thermal Process 




Wet film characterization of slot die 

processed lithium-ion battery 

coatings 

M. Schmitt, Institute of Thermal Process 




The Effects of 

Constant-Gate-Bias-Stress on the 

Performance of Solution-Processed 

IZO Thin-Fim Transistors 

M. Kaloumenos, Technical University 

Darmstadt, Department of Integrated Electronic 

Systems, 64283 Darmstadt, Germany et al. 

Drying of solution-processed 

electrode systems for organic 

photovoltaics 

F. Buss, Institute of Thermal Process 




55


Topic: C - Processing Topic: D - 


C6-923 

C7-46 

C7-56 

C7-136 

C7-686 

C7-844 

C7-1054 

Machine directional register 

modeling for multilayer printing in 

hybrid roll-to-roll printing systems 

Hyunkyoo Kang, Chemnitz University of 

Technology, Chemnitz, Germany; Peter 

Ueberfuhr, Chemnitz University of 

Technology, Chemnitz, Germany; Frank Siegel, 

Chemnitz University of Technology, Chemnitz, 



Effects of synthesis methods of 

hydrous niobium oxide on their 

properties 

L.A.Rodrigues, Instituto Tecnológico de 

Aeronáutica, São José dos Campos, Brazil, 

M.L.C.P.da Silva,Escola de Engenharia de 

Lorena, Universidade de São Paulo, Lorena, 

Brazil 

G.P. Thim, Instituto Tecnológico de 

Aeronáutica,São José dos Campos, Brazil. 

Neodymium and Samarium 

Substitution Effects in Sol-Gel Derived 

YAG Nanopowders 

A. Beganskiene, R. Raudonis, A. Kareiva*, 

Department of General and Inorganic Chemistry, 

Vilnius University, Vilnius, Lithuania; K. Gross 

et al. 

Characterization and polymerization 

of ophthalmic materials containing 

ZnO nanoparticles and furfuryl 

methacrylate 

Dong-Hyun Kim, Daebul university, Jeonnam, 

South Korea; Tae-Hun Kim, Baekseok 

university, Chungnam, South Korea; Seon-Ahr 

Cho, Daebul university, Jeonnam, South Korea; 

A-Young Sung, Daebul university, Jeonnam, 

South Korea 


nanofibers made of recombinant 

spider silk proteins for filter 

applications. 

Stephan Jokisch; Gregor Lang; Anja Lauterbach; 

Thomas Scheibel, Lehrstul Biomaterialien, FAN, 

Universität Bayreuth, Germany 

In-situ screening of plasmonic 

properties of novel metal 

nanoparticles by combinatorial 

synthesis in micro fluid segment 

sequences 

A. Knauer, University of Technology Ilmenau, 

Ilmenau, Germany; Andrea Csaki, Institute of 

Photonic Technology, Jena, Germany; 

Wolfgang Fritzsche, Institute of Photonic 

Technology, Jena, Germany et al. 

Cysteine Functionalized ZnO 

Quantum Dots 

O.Arslan, A.P.Singh, S.Mathur , University of 

Cologne, Cologne, Germany 

C7-1062 

C7-1073 

C7-1096 

C7-1162 

Niobium (V) Oxide Anisotropic 

Nanostructures grown by CVD and 

application as Humidity Sensors 

Raquel Fiz, Francisco Hernandez-Ramirez, 

Thomas Fischer, Sonia Estrade, Lluis 

Lopez-Conesa, Francesca Peiro, J. Daniel Prades 

and Sanjay Mathur 

Molecule-based PECVD of Highly 

Conducting Transparent Tin Oxide 

Films 

Jai Singh, Trilok Singh, Sanjeev Kumar, 

Sanjay Mathur* 

Institute of Inorganic Chemistry, University of 

Cologne, Germany 

Possibility of the Purposeful 

Fabrication of Nanodimensional 

Complex Oxides by Pyrolysis of 

Salt-polymeric Compositions 

O.V. Russkikh, Ural Federal University, 

Ekaterinburg, Russia;A.A.Ostroushko, Ural 

Federal University, Ekaterinburg, Russia; D.K. 

Kuznetsov, Ural Federal University, 

Ekaterinburg, Russia 

Influence of the Morphology on the 

Reactivity: The Example of 

Aluminium Nanopowders 

B. André, IM2NP, Marseille, France; M.V. 

Coulet, IM2NP, Marseille, France; V. Heresanu, 

CINaM, Marseille, France; J. Rogez, IM2NP, 

Marseille, France; R. Denoyel, Madirel, 

Marseille, France. 

D1-7 

D1-18 

D1-148 

D1-159 

oral poster 

D1-198 

D1-355 

D1-474 

D1-534 

oral poster 


Microstructure Characterisation 

Microscopic Distribution of Lght 

Elements in Steel Studied by 

Secondary ion Mass Spectrometry 

S.Suzuki, Tohoku University, Sendai, Japan; 

E.P.Kwon, Tohoku University, Sendai, Japan; 

M.Tabuchi, NIMS, Tsukuba, Japan; F.Abe, 

NIMS, Tsukuba, Japan 

Optical Characterization of 

Melt-Spun Polymeric Fibers 

M. Beckers, Institut für Textiltechnik (ITA) der 

RWTH Aachen University, Aachen, Germany; 

N. Vestweber, Institut für Textiltechnik (ITA) 

der RWTH Aachen University, Aachen, Germany 

et al. 

3D characterization of twin 

morphology in cold-rolled 

magnesium 

Peter Molnár, Institute of Physics of the ASCR, 

Prague, Czech Republic; 

Andriy Ostapovets, Institute of Physics of the 

ASCR, Prague, Czech Republic; 

Ale Jäger, Institute of Physics of the ASCR, 

Prague, Czech Republic et al. 

3D Sintering Microstructure 

Quantification 

Kathy Lu, Virginia Tech, Blacksburg, Virginia, 

USA; 

Zhenbo Xia, Virginia Tech, Blacksburg, 

Virginia, USA; 

Bo Chen, Virginia Tech, Blacksburg, Virginia, 

USA. 

Application of EBSD in 

characterization of low-carbon steel 

structure under SPD 

A. Zavdoveev, V. Varyukhin, O.O.Galkin 

Donetsk Institute for Physics and Technology 

National Academy of Sciences of Ukraine, 

Donetsk, Ukraine et al. 

Local-strain evolution and crystal 

rotation of shape memory alloy 

characterized by Laue method 

combined with energy dispersive 

X-ray diffraction 

S. Sato, Institute for Materials Research, 

Tohoku University, Sendai, Japan; E.P. Kwon, 

Institute of Multidisciplinary Research for 

Advanced Materials, Tohoku University, 

Sendai, Japan et al. 

Characterization of ADI/AGI by 

magnetic spot-pole method 

Z. Andrsova, Technical University of Liberec; B. 

Skrbek, Technical University of Liberec 

High Energy Materials Science 

(HEMS) at PETRA III 

N. Schell, Helmholtz-Zentrum Geesthacht, 

Center for Materials- and Coastal Research, 

Geesthacht, Germany; T. Fischer, TU Berlin, 

Berlin, Germany et al. 

56


Topic: D - 


D1-605 

oral poster 

D1-652 

D1-738 

D1-754 

oral poster 

D1-761 

D1-849 

D1-873 

D1-875 

Characterisation of corrosion and 

abrasion resistant coatings for steels 

A. Schütz, Metallische Werkstoffe Universität 

Bayreuth, Bayreuth, Germany; M. Günthner, 

Keramische Werkstoffe Universität Bayreuth, 

Bayreuth, Germany; G. Motz, Keramische 

Werkstoffe Universität Bayreuth, Bayreuth, 


Intermetallic growth in Al-Fe system 

studied by time resolved X-ray 

tomography combined with 

FIB/SEM/TEM 

Guillaume Pasche, Aicha Hessler-Wyser, Robin 

Schaublin, Cecile Hebert 

In situ studies of solidification and 

phase transformations in Mg-Dy 

alloys 

A. Staeck, P. Staron, N. Schell, M. Müller, D. 

Tolnai, N. Hort 

A new protocol for 

absorption-contrast and 

phase-contrast microtomography 

for materials science applications 

F. Beckmann, Helmholtz-Zentrum Geesthacht, 


F. Wilde, Helmholtz-Zentrum Geesthacht, 


L. Lottermoser, Helmholtz-Zentrum Geesthacht, 


In situ synchrotron radiation study 

during hot compressive deformation 

of a novel gamma-TiAl alloy 

Andreas Stark, Helmholtz-Zentrum Geesthacht, 

Geesthacht, Germany; Emanuel Schwaighofer, 

Montanuniversität Leoben, Leoben, Austria; 

Svea Mayer, Montanuniversität Leoben, 

Leoben, Austria et al. 

Investigations on Crystalline 

Materials with the Use of Two- and 

Three Dimensional Analytical X-ray 

Techniques 

J. te Nijenhuis, D. Götz and F. Masiello, 

PANalytical B.V. 

Almelo, 

The Netherlands 

NiO reduction studied by 

environmental transmission electron 

microscopy 

Q. Jeangros, C. Hébert and A. Hessler-Wyser, 

Interdisciplinary Centre for Electron 

Microscopy, EPFL, CH-1015 Lausanne et al. 

Phase Transformations in Steel 

During Welding Thermal Cycles 

Studied by In Situ High-Energy 

X-Ray Diffraction 

M. Blankenburg, Helmholtz-Zentrum 

Geesthacht, Geesthacht, Germany; P. Staron, 


Germany; A. Stark, Helmholtz-Zentrum 

Geesthacht, Geesthacht, Germany et al. 

D1-959 

oral poster 

D1-1035 

oral poster 

D2-346 

oral poster 

D2-416 

oral poster 

D2-478 

oral poster 

D2-645 

oral poster 

D2-726 

Quantitative carbon determination in 

low-carbon steels by the use of 

wavelength-dispersive X-ray 

spectroscopy (WDS) 

L. Koll, Institute of Materials Science and 

Mechanics of Materials, 

Technische Univeristät München, 

Boltzmannstr. 15, 85748 Garching, 


Nano Precipitates in Single Crystal 

Molybdenum Alloy Pillars 

E. Oveisi, Interdisiplinary Centre for Electron 

Microscopy (CIME), École Polytechnique 

Fédérale de Lausanne (EPFL), Lausanne, 




Cyclic hardness testing – a new 

short-time procedure for the 

evaluation of the cyclic properties of 

metallic materials 

H. Kramer, P. Starke, D. Eifler, 


University of Kaiserslautern, 

P.O. Box 3049, D-67653 Kaiserslautern, 

Germany 

Microstructural changes of spinel 

containing ULCCs at high 

temperatures 

J. Haufe, TU Bergakademie Freiberg, Freiberg, 

Germany; T. A. Bier, TU Bergakademie Freiberg, 


Characterization of Europium Doped 

Silica Thin Films as Luminescent 

Materials by Small Angle X-Ray 

Scattering 

J. Akbarzadeh, University of Vienna, Faculty of 

Physics, Dynamics of condensed Systems, 

Austria; A. Feinle, Paris-Lodron University 

Salzburg, Materials Chemistry, Austria et al. 

Yield Point Phenomenon in 

Nanocrystalline Ni-Fe Investigated by 

In-Situ X-Ray Diffraction 

Steven Van Petegem, Materials Science and 

Simulations, Paul Scherrer Institut, Villigen, 


Investigation of local plasticity in thin 

large grained nickel mesocrystals by 

EBSD 

A.F. Knorr, Chair of Material Science, University 

of Saarland, Saarbrücken, Germany; B. 

Klusemann, Material Mechanics, RWTH Aachen, 

Aachen, Germany; M. Marx, Chair of Material 

Science, University of Saarland, Saarbrücken, 


D2-759 

D2-773 

D2-955 

D2-964 

oral poster 

D2-1000 

D2-1057 

D2-1114 

D2-1153 

Using EMATs to evaluate fatigue 

processes and phase transformation 

in austenitic steels 

A. Sorich, M. Smaga, D. Eifler, Institute of 

Materials Science and Engineering, University 

of Kaiserslautern, P.O. Box 3049, D-67653 

Kaiserslautern, Germany et al. 

NN 

C. Marichal; Paul Scherrer Institut, Villigen, 

Switzerland and EPFL, Lausanne, Switzerland;S. 

Van Petegem, Paul Scherrer Institut, Villigen, 

Switzerland; C. Borca, Paul Scherrer Institut, 

Villigen, Switzerland et al. 

In-situ observation of structure 

formation processes for organic 

solar cells 

F. Buss, Institute of Thermal Process 

Engineering, Thin Film Technology, Karlsruhe 

Institute of Technology, Karlsruhe, Germany et 

al. 

Local Fracture Toughness 

Measurements of NiAl Bond Coats 

by FIB-milled Micro Cantilever Tests 

R. Webler, S. Neumeier, K. Durst, M. Göken, 

Institut für Werkstoffwissenschaften, Lehrstuhl 

I, Universtität Erlangen-Nürnberg, 

Martensstrasse 5, D-91058 Erlangen, Germany 

Fatigue behavior and damage 

mechanisms of conventionally and 

ultra-fine grained Ti-6Al-7Nb 

C. Krechel, Department of Materials Science and 

Engineering, Institute I: General Materials 

Properties, University Erlangen Nürnberg, 

Martensstraße 5, 91058 Erlangen, Germany et 

al. 

Surface to bulk characterization of 

ternary palladium alloys: A triple 

method approach 

J. Kühn, BAM Federal Institute of Materials 

Research and Testing, 12200 Berlin, Germany; 

A. Lippitz, BAM Federal Institute of Materials 

Research and Testing, 12200 Berlin, Germany 

et al. 

Influences of the testing temperature 

on the time-dependent materials 

behavior of fcc- and bcc-materials 

investigated by nanoindentation 

long-term creep testing 

V. Maier, Institute 1: General Materials 

Properties, Department Materials Science and 

Engineering, University Erlangen-Nürnberg et 

al. 

Experimental investigation of 

composite tendons as a support 

system in earthwork engineering 

Hossein Mortazavi, ATSS Consulting Group, 

Tehran, Iran 

Ali Mortazavi, Amirkabir University of 

Technology, Tehran, Iran 

D1-885 

oral poster 

A new method for the evaluation of 

the Wide-Angle Scattering of 

non-graphitic carbon 

B. Smarsly, Justus-Liebig University, Giessen, 

Germany 

57


Topic: D - 


Topic: E - Modelling 

D3-330 

D3-435 

D3-588 




Reliability assurance by prevention 

of product counterfeiting: a new 

technique for authentication of 

security and safety components 

F. Luczak, Berliner Nanotest und Design GmbH, 

Berlin, Germany and Fraunhofer ENAS, 


Evaluating the adhesion of ultra-thin 

layers 

I. Hartwig, Center for Microtechnologies, 

Chemnitz, Germany; R. Ecke, Fraunhofer 

Institute for Electronic Nano Systems, 

Chemnitz, Germany; B. Brämer, Micro Materials 

Center, Chemnitz, Germany et al. 

Low cycle fatigue behaviour of hot 

pressed austenitic stainless steels 

and steel-zirconia composites 

A. Glage, Institute of Materials Engineering, 

Technische Universität Bergakademie Freiberg, 


E1-454 

E1-458 

E1-551 

E1-741 

E1-771 

E1-1011 

E1-1165 


Development and application of 2D 

remeshing methodology for finite 

element simulation with 

ABAQUS/Explicit to metal 

microcutting modeling. 

V. Pavlova, Institute for Applied Materials, KIT, 

Karlsruhe, Germany; M. Weber, Institute for 

Applied Materials, KIT, Karlsruhe, Germany et 

al. 

Experimental Design in Statistical 

Process Observation and Quality 

Evaluation 

M. Senn, Karlsruhe University of Applied 

Sciences, Karlsruhe, Germany; 

N. Link, Karlsruhe University of Applied 

Sciences, Karlsruhe, Germany; 

Finite-element-analysis of the 

forming process "cross rolling" with 

the aim of exploring the material 

flow and the damage degree in work 

pieces 

P. Benes, Karlsruhe Institute of Technology, 

Karlsruhe, Germany; J. Hoffmeister, Karlsruhe 

Institute of Technology, Karlsruhe, Germany; V. 

Schulze, Karlsruhe Institute of Technology, 


Modeling of Coupling Phenomena 

During Sintering-assembling Process 

by Pulsed Currents 

ELODIE BRISSON, KEVIN PALLEZ, PHILIPPE 

ROGEON, HENRI DESPLATS, PATRICK CARRE, 

TAHAR LOULOU, LIMatB, Université de Bretagne 

Sud, rue de Saint Maudé, 56321 Lorient CEDEX 

ALEXANDRE BONHOMME,Schneider 

Electric-Electropole-31 rue Pierre Mendes France 

38050 Grenoble Cedex 9, France. 

Simulation of the manufacturing 

process of case-hardenend powder 

metallurgical gear wheels 

P. Nusskern, Institute for Applied Materials - 

Materials Science and Engineering (IAM –WK), 

Karlsruhe Institute for Technology (KIT), 


Neuronal model identification of 

metallurgical process 

K. Gherfi, H. Bendjama, S. Bouhouche, H. 

Meradi 

Unité de Recherche Appliquée en Sidérurgie 

Métallurgie 

URASM/CSC; BP 196 23000 

Annaba, Algérie. 

Tél, Fax: +21338871729 

kaddour.gherfi@gmail.com 

Database driven Online Simulation 

of the Microstructure Evolution 

during Hot Rolling of Steel 

J. Orend, Institute of Metallurgy TU Clausthal, 

Clausthal-Zellerfeld, Germany; F. Hagemann, 

Salzgitter Mannesmann Forschung GmbH, 

Salzgitter, Germany et al. 

E1-1166 

E2-57 

E2-305 

E2-412 

E2-451 

E2-666 

E2-787 

E2-788 

Modeling Expanded Perlite 

Production in a Vertical Electrical 

Furnace 

Panagiotis M. Angelopoulos, National 

Technical University of Athens, Athens, Greece; 

Dimitrios I. Gerogiorgis, National Technical 

University of Athens, Athens, Greece et al. 

Computational 

Thermodynamics and Kinetics 

Diffusion of Interstitial Components 

in Systems with Traps 

J. Svoboda, Institute of Physics of Materials, 

Brno, Czech Republic; F. D. Fischer, 

Montanuniversität Leoben, Leoben, Austria; Y. 

V. Shan, Technical University Wien, Wien, 

Austria et al. 

Comparative investigation of 

phase-field models based on free 

energy and grand potential 

formulations 

O. Tschukin,Institute of Materials and 

Processes Karlsruhe University of Applied 

Scinces,Karlsruhe, Germany; 

A. Choudhury,Institute for Applied Materials 



Thermodynamic assessment of 

Fe-Mn-Nb-C system in application to 

high manganese steels 

Alexandra V. Khvan, Bengt Hallstedt, Keke 

Chang 

Phase Field Modeling of 

Gamma-Gamma' Microstructure 

Evolution in Ni-base Superalloys. 

O. Shchyglo, ICAMS, Ruhr-Universität 


M.K. Rajendran, ICAMS, Ruhr-Universität 


I. Steinbach, ICAMS, Ruhr-Universität Bochum, 

Germany 

Phase field Modeling of Diffusion in 

Solids 

N.Alemayehu, E.Borukhovich, U.Preiss, 

I.Steinbach 

Molecular simulation of 

Joule-Thomson coefficient of mixture 

refrigerants 

Y.V. Lysogorskiy, Kazan Federal University, 

Kazan, Russia; O.V. Nedopekin, Kazan Federal 

University, Kazan, Russia; D.A. Tayurskii, Kazan 

Federal University, Kazan, Russia 

A Monte Carlo study of the vacancy 

and solute diffusion in the presence 

of discrete trapping 

P. Warczok, Vienna University of Technology, 

A-1040 Vienna, Austria 

Y. V. Shan, Materials Center Leoben, A-8700 

Leoben, Austria 

E. Kozeschnik, Christian Doppler Laboratory for 

Early Stages of Precipitation, A-1040 Vienna, 

Austria 

58


Topic: E - Modelling 

Topic: F - Biomat 

E2-868 

E3-117 

E3-354 

E3-567 

E3-789 

E3-898 

The effect of temperature on the 

structural properties of the doped 

Sigma- 5 (310)[001] grain 

boundary in the D03-Fe3Al: Ab intio 

molecular dynamics study 

S. Chentouf,LEM3- University of Metz, 

Metz,France;J-M. Raulot,LEM3- University of 

Metz,Metz,France;H. Aourag,LEPM- University of 

Tlemcen, Tlemcen, Algeria; T. 

GROSDIDIER,LEM3- University of Metz, Metz, 

France 



Generating Foam Structures Using 

Implicit Functions 

J. Storm, TU Bergakademie Freiberg, Freiberg, 

Germany; 

M. Abendroth, TU Bergakademie Freiberg, 


Th. Liedke, TU Bergakademie Freiberg, Freiberg, 

Germany; 

T. Sieber, TU Bergakademie Freiberg, Freiberg, 


Theoretical approach of the B2 type 

ReX rare earth intermetallic 

compounds: ab initio calculations 

Abdessamad SEKKAL,Université Abou Bekr 

Belkaid, Tlemcen-Algérie. 

A. BENZAIR, Université Djillali Liabes, Sidi Bel 

Abbés, Algérie 

G.Merad, Université Abou Bekr Belkaid, 

Tlemcen-Algérie. 

Nanoscale simulation in FCC and 

BCC crystals using cluster based 

quasi continuum method 

N. Prajapati,ICAMS,Ruhr-Universitaet Bochum, 

Germany, B. Eidel, Universität Duisburg-Essen, 

Germany, A. Hartmaier, ICAMS,Ruhr-Universitaet 


Simulation of tribological interacting 

ta-C nanocoatings 

T. Kunze, Theoretical Chemistry, Technical 

University Dresden, D-01061 Dresden, Germany 

et al. 

Phase-field modeling of the 

microstructure rearrangement in 

twinned martensites 

C. Mennerich, Karlsruhe University of Applied 


F. Wendler, Karlsruhe University of Applied 


M. Jainta, Karlsruhe University of Applied 



E4-214 

E4-874 



Atomistic Study of the Influence of 

Lattice Defects on Thermal 

Conductivity 

T. Wang and A. Hartmaier, Interdisciplinary 

Centre for Advanced Materials Simulation 

(ICAMS), Ruhr-Universitaet Bochum, Bochum, 

Germany 

Ab initio simulation of surface 

electronic states of topological 

insulator under the stress 

A.G. Kijamov, Kazan Federal University, Kazan, 

Russia; Y.V. Lysogorskiy, Kazan Federal 

University, Kazan, Russia; O.V. Nedopekin, 

Kazan Federal University, Kazan, Russia; D.A. 

Tayurskii, Kazan Federal University, Kazan, 

Russia 

F1-49 

oral poster 

F1-164 

F1-250 

oral poster 

F1-357 

F1-443 

oral poster 

F1-546 

oral poster 

F1-587 

F1-592 


Preparation of Bilayered Scaffolds for 

Osteochondral Tissue Engineering 

Based on 45S5 Bioglass® and 

Biodegradable polymers 

P. Nooeaid, Institute of Biomaterials, University 

of Erlangen-Nuremberg, Erlangen, Germany; 

J.A. Roether, Institute of Polymer Materials, 

University of Erlangen-Nuremberg, Erlangen, 


Porous Ti-Nb alloy with low 

Young´s modulus for biomedical 

applications 

K. Zhuravleva,IFW Dresden, Dresden, Germany 

A. Teresiak, IFW Dresden, Dresden, Germany 

S. Scudino, IFW Dresden, Dresden, Germany 

M. Calin, IFW Dresden, Dresden, Germany 

A. Gebert, IFW Dresden, Dresden, Germany 

L. Schultz, IFW Dresden, Dresden, Germany 

J. Eckert, IFW Dresden, Dresden, Germany 

Applications of nanocrystalline 

hydroxyapatite in biosensors 

Yong Liu, Ying Zhang, Yanni Tan, Qing Zhang 

and Xiaobo Ji; 

State Key Laboratory of Powder Metallurgy, 

Central South University 

,Changsha, P.R.China 

Modification of recombinant spider 

silk proteins for medical applications 

E. Doblhofer, Universität Bayreuth, Bayreuth, 

Deutschland; T. Scheibel, Universität Bayreuth, 

Deutschland 

Localisation of cells in a porous Ti 

alloy by SEM techniques 

D. Laipple, B. Luthringer, A. Deing, R. 

Willumeit, A. Schreyer, 

Helmholtz - Zentrum Geesthacht, Germany; 

Novel CaP-ZrO2-SiO2 scaffolds with 

high strength as bone replacement 

materials 

T. Schumacher, Advanced Ceramics, University 

of Bremen, Bremen, Germany; L. Treccani; 

Advanced Ceramics, University of Bremen, 

Bremen, Germany; K. Rezwan Advanced 

Ceramics, University of Bremen, Bremen, 

Germany 

The influence of alginate fibers on 

peripheral nerve regeneration, in vivo 

study 

Paulina Bednarz, AGH University of Science and 

Technology, Krakow, Poland; Dariusz 

Szarek,Wroclaw University Hospital, Wroclaw, 

Poland; Krzysztof Marycz, Wroclaw Univ. of 

Environmental and Life Sciences,Wroclaw, 

Poland et al. 

Protective function of polymer 

encapsulations for long-term 

implantable microsystems 

S. Kirsten, Technische Universität Dresden, 

Germany; J. Uhlemann, Technische Universität 

Dresden, Germany; M. Braunschweig, 

Microelectronic Packaging Dresden GmbH, 

Dresden, Germany; Mi. Kuntz, CeramTec GmbH, 

Ploching, Germany et al. 

59



F1-700 

F1-856 

F1-869 

F1-912 

oral poster 

F1-940 

F1-1038 

F1-1039 

F1-1097 

oral poster 

The Influence of Modified 

Polysaccharides on the Growth of 

Vascular Endothelial Cells on 

Biodegradable Bone Substitution 

Material 

D.Weber, Deutsches Krebsforschungszentrum, 

Heidelberg, Germany; S.Knaack, 

Universitätsklinikum Dresden, Dresden, 

Germany; T.Hanke, Technische Universität 

Dresden, Dresden, Germany et al. 

Influence of grain size reduction 

from micro- to nano-level on 

electrical properties of full dense 

hydroxyapatite bioceramics 

Miodrag J. Lukić (Sp), Smilja 

Marković and Dragan 

Uskoković 

Centre for Fine Particles Processing and 

Nanotechnologies, Institute of Technical 

Sciences of the SASA, Belgrade, Serbia 

New method to control the 

morphology of ionically crosslinked 

alginate hydrogels for soft tissue 

regeneration 

Doina Dimonie, Radu Fierascu, Raluca Gabor, 

Bianca Galateanu , Marius Ghiurea, Marius 

Petrache 

AziGrip4(TM)-LUB: Ultrathin 

lubricating coating for medical 

applications 

S. Tosatti and S. Zürcher, SuSoS AG, 


Tribological and Electrochemical 

characterization of biomedical alloys 

for surgical implants in simulated 

body fluid used by SS AISI 316L 

Fellah M., Labaiz M., Assala O., Djeddi N. 

In Vitro Evaluation of Cytotoxicity of 

Stainless Steel Foam by MTT Assay 



Turkey; 


and Materials Engineering Department, Istanbul 

Characterisation of Biocompatibility 

of 17-4 PH Stainless Steel Foam by 

XTT Cytotoxicity Assay 



Turkey; 



Turkey 

Polymer Implants Supporting Nerve 

Regeneration in Peripheral and 

Central Nervous System 

J. Laska, AGH University of Science and 

Technology, Krakow, Poland; P. Bednarz, AGH 

University of Science and Technology, 

Krakow, Poland; A. Lis, AGH University of 

Science and Technology, Krakow, Poland et al. 

F1-1131 

F1-1143 

F1-1159 

F2-291 

oral poster 

F2-325 

oral poster 

F2-363 

oral poster 

F2-406 

oral poster 

Polyhydroxyalkanoates, their novel 

blends and composites 

P.Basnett,University of Westminster, London, 

UK, E. Akarayonye ,University of Westminster, 

London, UK, L. Francis, University of 

Westminster, London, UK, R. Rai,University of 

Westminster, London, UK, T. Kehavarz, 

University of Westminster, London, UK, I. 

Quintana Tekniker, Spain,V. Salih,University 

College London, UK, J. K. Knowles,University 

Oxidation Behavior and Evaluations 

of Aesthetic and Mechanical 

Properties of Oxide Coating on 

Ti-base Biomedical Alloy 

E. Miura-Fujiwara, University of Hyogo, Himeji, 

Japan; S. Yamada, Nagoya Institute of 

Technology, Nagoya, Japan; Y. Watanabe, 

Nagoya Institute of Technology, Nagoya, 

Japan; H. Sato, Nagoya Institute of 

Technology, Nagoya, Japan et al. 

Electrophoretic deposition of 

hydroxyapatite from non-aqueous 

solvents 

V Ozhukil Kollath, LCIS-GreenMAT, University 

of Liège, Liège, Belgium; Materials 

Technology, Flemish Institute for 

Technological Research (VITO), Mol, Belgium; 

R Closset, LCIS-GreenMAT, University of Liège, 

Liège, Belgium et al. 


Biomaterials 

Label-Free Nondestructive 

Discrimination of Colon Carcinoma 

Sublines and Biomolecular Insights 

Into Their Differential Hsp70 

Expression: DNA/RNA Nucleobase 

Specific Changes 

Dr. M. Gehrmann, Clinic of Radiation Therapy, 

Klinikum rechts der Isar, Technische 

Universitaet Muenchen, Munich, Germany et al. 

Using Biomotors as Functional 

Nanotransporters 

W. Teizer, A. Sikora, D. Oliveira, K. Kim, M. 

Umetsu, T. Adschiri: WPI-AIMR, Tohoku 

University, Sendai, Japan; A. Liao, W. Hwang: 

Texas A&M University, College Station, TX, 

USA. 

GaN nanostructures for tissue 

regeneration and cancer therapy 

V. Popa, National Center for Materials Study 

and Testing, Technical University of Moldova, 

Chisinau, Republic of Moldova et al. 

3D Conductive Polymeric Structures 

for Tissue Engineering Applications 

P. Danilevicius, Institute of Electronic Structure 

and Laser (IESL), Heraklion, Greece; M. Oubaha, 

Optical Sensors Laboratory, National Centre for 

Sensor Research, Dublin City University, 

Glasnevin, Ireland et al. 

F2-468 

oral poster 

F2-599 

oral poster 

F2-630 

F2-646 

oral poster 

F2-690 

oral poster 

F2-805 

oral poster 

F2-1098 

oral poster 

In vitro Biocompatibility of Silicon 

Nanowires 

S. Odabas,Hacettepe University, Ankara, 

Turkey; J.E. Spanier, Drexel University, 

Philadelphia, USA; E. Piskin, Hacettepe 

University, Ankara, Turkey; B. Garipcan, 

Bogazici University, Istanbul, Turkey. 

Electrospun 

polyurethane/polylactide fibers for 

neural tissue regeneration: 

preparation, mechanical properties 

and cell compatibility 

A. Lis, AGH University of Science and 

Technology, Krakow, Poland; R. Fryczkowski, 

ATH University of Bielsko-Biala, Bielsko-Biala, 

Poland; D. Szarek, Wroclaw University 

Hospital, Wroclaw, Poland et al. 

Single-cell adhesion force 

spectroscopy on photo-switchable 

nano-surfaces 

C. Lamprecht, Christian-Albrechts-University, 

Kiel, Germany; L. Kadem, 

Christian-Albrechts-University, Kiel, Germany; J. 

Reverey, Christian-Albrechts-University, Kiel, 


Switching Cell Adhesion on 

Nanostructured Surfaces 

L. Kadem, Christian-Albrechts-University of Kiel, 

Kiel, Germany; M. Holz, 

Christian-Albrechts-University of Kiel, Kiel, 

Germany; S. Viebig, 

Christian-Albrechts-University of Kiel, Kiel, 


Hydrogels with tunable elasticity for 

mechanotransduction studies 

D Missirlis, Heidelberg University and Max 

Planck Institute for Intelligent Systems, 

Heidelberg, Germany; 

J Spatz, Heidelberg University and Max Planck 

Institute for Intelligent Systems, Heidelberg, 

Germany; 

Photoinduced Release of Gaseous 

Small Molecules from Electrospun 

Fibers 

R. Wyrwa, INNOVENT e.V., Biomaterials 

Department, Jena, Germany; C. Bohlender, 

Institut for Inorganic and Analytical Chemistry, 

Friedrich-Schiller-University Jena, Germany et 

al. 

Toxicity Studying of Polyoxometalat 

Mo72Fe30, Possibilities of Its 

Transport in Organism and 

Interactions with other Substances 

A.A. Ostroushko, I.G. Danilova, M.O. 

Tonkushina, S.Yu. Medvedeva, I.F. Gette, 

E.A.Mukhlynina, A.V. Prokofieva, M.V. 

Morozova 

60



F3-22 

F3-94 

F3-101 

F3-189 

oral poster 

F3-279 

F3-303 

F3-359 

oral poster 

F3-452 

oral poster 

F3-791 



Biomimetic Soft Microorigami: Smart 

3D Micro-Constructs from 

Self-Folding Polymer Films 

Svetlana Zakharchenko, Georgi 

Stoychev, Leonid Ionov, Leibniz Institute of 

Polymer Research Dresden (Germany) 

The intrinsic property of melanin to 

split and reform the water molecule. 

A.Solis Herrera, MC Arias Esparza, RI Solis 

Arias,P.E: Solis Arias, M.P. Solis Arias. All 

Authors: Human Photosynthesis Study Center, 

Aguascalientes, Mexico. 

One step forward towards artificial 

photosynthesis: functionalization of 

metal oxides with metaloproteins for 

solar hydrogen generation 

A. Braun, D.K. Bora, K. Schrantz, T. Graule, 

Empa. Swiss Federal Laboratories for Materials 

Science and Technology, CH-8600 Dübendorf, 

Switzerland; E. Rozhkova, Argonne National 

Laboratory, Argonne IL 60439, USA et al. 

Biomechanical Behaviour and 

Ultrasonographical Evaluation of 

Lesions in Horse Tendons 

C. Freitag, University, Siegen, Germany; A. 

Ohrndorf, University, Siegen, Germany; H.-J. 

Christ, University, Siegen, Germany; K. Shell, 

University, Giessen, Germany; S. Wenisch, 

University, Giessen, Germany et al. 

The light weight structure and 

behavior of different Crustaceae 

J.N. Grossmann, University of Bonn, Bonn, 

Germany; H. Schmitz, University of Bonn, 

Bonn, Germany 

Biotechnological Production of 

Engineered Spider Silk Proteins 

A. Heidebrecht, University of Bayreuth, 

Bayreuth, Germany; T. Scheibel, University of 



fibers made of recombinant spider 

silk proteins 

G. Lang, Department of Biomaterials, University 

of Bayreuth, Bayreuth, Germany; T. Scheibel, 

Department of Biomaterials, University of 


Mineral arrangements in human 

dentine: insights at the mm, 

micrometer and nanometer 

length-scales 

P. Zaslansky, Julius Wolff Institut, Charité - 

Universitätsmedizin Berlin, Germany; A. 

Maerten, Materials Engineering, Technische 

Universitaet Berlin, Germany et al. 

Tree- and torrent-frog like adhesives 

for wet and flooded environments 

D.M. Drotlef, Max-Planck Institut für 

Polymerforschung, Mainz, Germany; A. del 

Campo,Max-Planck Institut für 

Polymerforschung, Mainz, Germany 

F3-836 

F3-857 

oral poster 

F3-883 

F3-917 

oral poster 

F3-975 

F3-1004 

oral poster 

F3-1006 

oral poster 

Beta-Tricalcium Phosphate Platelets 

For Load-Bearing Bone Substitutes 

L. Galea, RMS Foundation, Bettlach, 

Switzerland; M. Bohner, RMS Foundation, 

Bettlach, Switzerland; M. Niederberger, ETHZ, 

Zurich, Switzerland; T. Graule, EMPA, 


Deformation and failure behaviour 

of bio-inspired metal foam 

composite structures under 

quasistatic and impact loading 

P. Schüler, TU Berlin, Materials Engineering, 

Straße des 17. Juni 135, 10623 Berlin, 

Germany; 

S. F. Fischer, Foundry-Institute RWTH Aachen, 

Intzestraße 5, 50072 Aachen, Germany et al. 

Bioinspired 3D Surfaces for the 

Efficient Reduction of Airborne 

Nanoparticles 

S. Busch, Department of Microsystems 

Engineering IMTEK, University of Freiburg, 

Freiburg, Germany; X. Vinzenz, Institute for 

Bioprocessing and Analytical Measurement 

Techniques, Heilbad Heiligenstadt, Germany et 

al. 

Activation and Stabilisation of 

Lactate Oxidase in Ionic liquids 

S. Scheuermann, University of Applied 

Sciences Mannheim, Mannheim, Germany; V.F. 

Curto, Dublin City University, Dublin, Ireland; 

D. Diamond, Dublin City University, Dublin, 

Ireland et al. 

Unusual Structure and Mineral 

Composition of Cuticle forming the 

Pars Incisiva in the Mandibles of the 

Terrestrial Crustacean Porcellio 

scaber (Isopoda) 

J. Huber, Central Facility for Electron 

Microscopy, University of Ulm, 

Alber-Einstein-Allee 11, 89069 Ulm, Germany; 

H.-O. Fabritius, Max Planck Institute for Iron 

Research, Max Planck Str. 1, 40237 Düsseldorf, 


Bio-Inspired Precipitation of 

Semiconducting Oxides on 

Genetically Modified Tobacco 

Mosaic Viruses 

N. Stitz, Universität Stuttgart, Stuttgart, 

Germany; P. Atanasova, Universität Stuttgart, 

Stuttgart, Germany; D. Rothenstein, Universität 

Stuttgart, Stuttgart, Germany; J. Baier, 

Universität Stuttgart, Stuttgart, Germany et al. 

Nanostructured paper-like material 

made through self-assembly of 

individual vanadia nanofibers 

Z. Burghard, Institute for Material Science, 

University of Stuttgart, 70569 Stuttgart, 

Germany; 

T. Dufaux, Nanoscale Science Department, 

Max-Planck-Institute for Solid State Research, 

70569 Stuttgart, Germany et al. 

F3-1087 

F4-402 

F4-669 

F4-820 

F4-828 

F4-829 

F4-863 

The influence of UV, ethylene oxide 

and cold plasma sterilization on 

properties of porous 

polyurethane/polylactide blends 

Paulina Bednarz, AGH University of Science and 

Technology, Krakow, Poland; Jadwiga Laska, 

AGH University of Science and Technology, 

Krakow, Poland; 


Monitored Multilayer Water Vapour 

Barrier Coatings for Flexible Implants 

M. Weinmann, V. Bucher, W. Nisch, C. 

Burkhardt, A. Stett, NMI Natural and Medical 

Sciences Institute at University of Tuebingen, 

Reutlingen, Germany; G. Urban, University of 

Freiburg, Freiburg, Germany; 

Low-Temperature Plasma Treatments 

for Amino Functionalization of 

Poly(lactic-co-glycolic Acid) (PLGA) 

Films 

Stefano Zanini, Dipartimento di Fisica “G. 


Milano-Bicocca, p.za della Scienza, 3 I-20126 

Milano ITALY et al. 

Random pair distribution analysis of 

the microbial adhesion on different 

biomaterials surfaces 

C. Lüdecke 1,2,4; D. Siegismund 1,3,4; M. 

Roth 2,4; J. Bossert 1,4; M. Rettenmayr 1,4; S. 

Schuster 3,4 et al. 

Studying biofilm formation on 

biomaterials by a combined 

experimental and theoretical 

approach 

C. Lüdecke 1,2,4; D. Siegismund 1,3,4; M. 

Roth 2,4; J. Bossert 1,4; M. Rettenmayr 1,4; S. 

Schuster 3,4 et al. 

Mechanically responsive and 

antibacterial coating for textile 

biomaterials 

E.Kulaga, K.Anselme, L.Balan, V.Roucoules, 

L.Ploux 

Encapsulation of Essential Oils in 

Sodium and Calcium Alginate for 

the Development of Antimicrobial 

FIlms and Surgical Sutures 

I. Liakos, L. Rizzello, C. La Tegola, I. S. Bayer, 

P. P. Pompa, Center for Biomolecular 

Nanotechnologies, Istituto Italiano di 

Tecnologia @UniLe, via Barsanti, 73010 

Arnesano, Lecce, Italy. 

R. Cingolani, A. Athanassiou, Istituto Italiano 

di Tecnologia (IIT), via Morego 30, 16163 

Genova, Italy. 

61



Topic: X - Miscellaneous 

F5-184 

oral poster 

F5-213 

oral poster 

F5-374 

oral poster 

F5-380 

F5-381 

oral poster 

F5-405 

F5-431 



Development of new beta-Ti alloys 

for hard tissue replacement 

A. Helth, IFW Dresden, Dresden, Germany; K. 

Zhuravleva, IFW Dresden, Dresden, Germany; 

M. Calin, IFW Dresden, Dresden, Germany; A. 

Gebert, IFW Dresden, Dresden, Germany; J. 

Eckert, IFW Dresden, Dresden, Germany; 

Oligosaccharide-functionalized 

poly(ethylene imine) nanoparticles 

as drug carriers in calcium 

phosphate bone cements 

M. Schumacher, University Hospital Hospital 

Carl Gustav Carus and TU Dresden, Germany; C. 

Striegler, Leibniz Institute of Polymer Research 

Dresden, Germany; D. Appelhans, Leibniz 

Institute of Polymer Research Dresden, Germany 

et al. 

Implications of Diet, Steroid, and 

Estrogenic cessation in rat 

osteoporotic induction by DEXA and 

molecular analysis 

P. Govindarajan, Laboratory of Experimental 

Trauma Surgery, Justus-Liebig University, 

Giessen 35394, Germany; G. Schlewitz, 

Department of Trauma Surgery, University 

Hospital of Giessen-Marburg, Giessen 35385, 


Biocompatible monomers for 

photo-based additive manufacturing 

technologies 

S.C. Ligon, Inst for Applied Synthetic 

Chemistry, TU Wien, Austria; S. Baudis, Inst for 

Applied Synthetic Chemistry, TU Wien, Austria; 

F. Nehl, Inst for Applied Synthetic Chemistry, 

TU Wien, Austria et al. 

Establishment of the novel approach 

“in situ Tissue Engineering” for bone 

defect healing 

Kerstin Fritzsche, Children's Hospital and 

Polyclinic for Children's and Youth Medicine, 

University Hospital Carl Gustav Carus, 

Fetscherstr. 74, 01307 Dresden, Germany et al. 

Polylactide Scaffolds for Bone Tissue 

Engineering Fabricated via Direct fs 

Laser Writing 

P. Danilevicius, Institute of Electronic Structure 

and Laser (IESL), Heraklion, Greece; F. 

Claeyssens, Kroto Research Institute, University 

of Sheffield, Sheffield, United Kingdom et al. 

Influence of Ti-6Al-4V material 

porosities on cell metabolism 

A. Deing, Helmholtz-Zentrum Geesthacht, 


B. Luthringer, Helmholtz-Zentrum Geesthacht, 


T. Ebel, Helmholtz-Zentrum Geesthacht, 


F5-494 

F5-673 

oral poster 

F5-674 

oral poster 

F5-722 

oral poster 

F5-916 

oral poster 

Biphasic construct formed by 

hydroxylapatite granules as osseous 

phase are suitable for osteochondral 

defect repair in an experimental 

sheep model 

Katrin Susanne Lips, Laboratory for 


Justus-Liebig-University, Giessen, Germany; Iris 

Schleicher, Department of Trauma Surgery, 

University Hospital Giessen and Marburg, 

Giessen, Germany et al. 

Controlled Plasma Oxidation of 

Metallic Implant Materials 

M.Göttlicher, Justus-Liebig-University, Gießen, 

Germany; M.Rohnke, Justus-Liebig-University, 

Gießen, Germany; A.Helth, Leibniz Institute for 

Solid State and Materials Research, Dresden, 


Regulation of cell adhesion and 

integrin expression by biomimetic 

surface coatings 

E. Schwab, University of Heidelberg, Germany; 

R. Medda, University of Heidelberg, Germany; 

M. L. Dragovits, University of Heidelberg, 

Germany; N. Perschmann, University of 

Heidelberg, Germany et al. 

Nanocomposite collagen scaffolds 

for bone tissue engineering – effect 

of silica and hydroxyapatite 

mineralization on the structure, 

mechanical properties, and 

biocompatibility 

S. Heinemann, Technische Universität Dresden, 

Germany; C. Heinemann, Technische 

Universität Dresden, Germany; M. Jäger, 

Technische Universität Dresden, Germany; K. 

Glenske, Justus-Liebig-Universität Gießen, 


Simvastatin induces Osteogenic 

Differentiation in Human 

Mesenchymal Stromal Cells and can 

be used in Combination with Drug 

Delivery Systems for Modification of 

Biomaterials 

B. Woltmann,Institute of Physiological 

Chemistry, University of Technology Dresden, 

Dresden, Germany et al. 

X-62 

X-82 

X-166 

X-583 

X-600 

X-660 

X-664 

Miscellaneous 

Preparation and characterisation of 

gold-copper alloys plated from an 

alkaline cyanide bath 

E. Brun, CEA Valduc, France; F. Durut, CEA 

Valduc, France; R. Botrel, CEA Valduc, France; 

M. Théobald, CEA Valduc, France; G. Pascal, 

CEA Valduc, France; V. Vignal, CNRS, France. 

Thermal conductivity of air filled 

open cell aluminum foams 

A. August, Karlsruhe Institute of Technology 

(KIT), Karlsruhe, Germany 


(KIT), Karlsruhe, Germany 

M. Roelle, University of Applied Sciences, 


S. Schmid, University of Applied Sciences, 


Mechanical Characterization of 

Carbon Bonded Aluminia using the 

Small Punch Test 

S. Soltysiak, TU Bergakademie Freiberg 

Institute for Mechanics and Fluid Dynamics, 

Freiberg, Germany; M. Abendroth, TU 

Bergakademie Freiberg Institute for Mechanics 

and Fluid Dynamics, Freiberg, Germany et al. 

Repair processes for carbon depleted 

ultra-low k materials 

R. Leitsmann, GWT-TUD GmbH, Chemnitz, 

Germany; 

O. Böhm, Technical University Chemnitz, 

Germany; 

P. Plänitz, GWT-TUD GmbH, Chemnitz, 

Germany; 

M. Schaller, Globalfoundries Module Two 

GmbH & Co. KG, Dresden, Germany et al. 

Variation in raw material 

composition and shaping route and 

its influence on the microstructure 

and mechanical properties of 

carbon-bonded Al2O3-C 

Y. Klemm,Department of Materials Engineering, 

TU Bergakademie Freiberg, Gustav-Zeuner Str. 

5, 09596 Freiberg, Germany et al. 

Development and characterization of 

nanostructures containing titanium 

oxide to hydrogen production by 

photoelectrolysis 

A. C. Teloeken, Universidade Federal do Rio 

Grande do Sul, Porto Alegre, Brazil; T. Graule, F. 

Clemens, Swiss Federal Laboratories for 

Materials Science and Technology, Dübendorf, 


Material and Energy Efficient 

Production Approach for the 

Austempered Ductile Iron (ADI) 

Using Integrated Casting-Heat 

Treatment Process 

A. Meena, Arts et Métiers ParisTech, LMPF-EA 

4106, Châlons-en-Champagne, Cedex, France; 

M. El Mansori, Arts et Métiers ParisTech, 

LMPF-EA 4106, Châlons-en-Champagne, 

Cedex, France 

62


Topic: X - Miscellaneous 

Topic: Y - Honorary 

Symposium 

X-779 

X-867 

Flame spraying of ceramic oxides 

coatings in the system 

CaO-ZrO2-TiO2 for refractory 

applications 

Stefan Schafföner, TU Berakademie Freiberg, 


Christos G. Aneziris, TU Bergakademie Freiberg, 


Gregor Bohne, TU Bergakademie Freiberg, 


Effect of Corrosion on Microstructure 

and Electrical Resistivity of High 

Zirconia Fused Cast Refractories 

Used in Electric Heated Glass Melters 

A. Saberi,Chair of Materials Processing, Faculty 

of Engineering Science, University of Bayreuth, 

95440 Bayreuth, Germany et al. 

Y1-48 

G.Gottstein Honorary 

Symposium on 

Characterisation and Design of 

Microstructure for Adv. 


Grain Boundary Wetting in the 

Zr-Nb Alloys 

B.B. Straumal(1,2), A.S. Gornakova(1) 

(1)Institute of Solid State Physics, Russian 

Academy of Sciences, Chernogolovka, Ac. 

Ossipyan str. 2, Moscow district, 142432 

Russia 

(2)Karlsruher Institut für Technologie, Institut 

für Nanotechnologie, 

63

List of Presenting Authors 

A 

B 

Acet, M. Thu 17:45 

Acosta, M. A5-177 

Acosta, M. Thu 11:15 

Acquier, P. B7-698 

Acquier, P. Wed 10:30, B7-509 

Adam, T.J. Wed 12:30, B5-118 

Adelung, R. A3-729 

Adelung, R. Tue 17:30 

Agrawal, G. A2-132 

Ahmadi, F. B7-1043 

Ahmadi, M.R. Wed 16:45 

Ahmadi, Z. Wed 18:00 

Akbarzadeh, J. Thu 12:30, D2-478 

Al-Samman, T. Thu 10:30 

Albe, K. A5-877 

Albert, E. B4-368 

Albrecht, D. A7-603 

Alemayehu, N. E2-666 

Allwood, J. Tue 10:00 

Alsmeier, J.H. Thu 11:45 

Alt, V. Thu 11:45 

Amancio, S. Thu 16:15, C3-206 



Amoorezaei, M. Wed 11:45 

Anar, N. wed 16:00, B5-525 

Andr ová, Z. D1-474 

André, B. C7-1162 

André, B. Tue 11:45 

Angelopoulos, P. E1-1166 

Apel, M. Wed 12:15 

Appel, F. B1-462 

Appel, F. B1-467 

Appel, F. Tue 17:45, B1-129 

Appel, F. Tue 16:45 

Appelhans, D. Thu 09:15 

Ardeshiri, A. C4-932 

Arslan, O. C7-1054 

Arzaghi, M. Wed 09:45 

Arzaghi, M. Thu 15:30 

Ashrafizadeh, F. C3-3 

August, A. X-82 

Auricchio, F. Tue 10:45 

Bach, J. wed 14:45 

Backe, D. B5-1146 

Backen, A. Thu 15:30 

Bäurer, M. Wed 11:30 

Baghaie Yazdi, M. Thu 12:15 

Baiker, M. Thu 18:15 

Bakradze, M. Thu 10:30, 

Balasubramanian, G. A1-1095 Tue 12:00, 

Balke, N. A2-1068 Tue 17:30 

Bambach, M. Thu 10:30, B2-816 

Bandorf, R. Wed 12:15 

Barnoush, A. Thu 17:45 

Barrales Mora, L. Tue 15:45 

Barrales-Mora, L. Wed 10:15 

Barraud, E. Tue 16:45 

Bartex, S. Wed 18:00 

Bartex, S. Thu 18:00 

Basir Parsa, A. B1-842 

Batista, L. B4-769 

Bauer, U. Tue 17:30, B3-755 

Bauereiß, A. Thu 11:45 

Baunach, M. C6-703 

Bayer, T. A5-284 

Bazyleva, O. B1-1115 

Bechtold, C. A3-344 

Beck, T. wed 18:00, B5-392 

Beckers, M. D1-18 

Beckmann, F. Wed 12:30, 

Bednarz, P. D1-754 F1-587 

Bednarz, P. F3-1087 

Benes, P. E1-551 

Bennett, T. B9-30 

Berger, O. Tue 16:30 

Berger, O. Wed 15:15 

Berghoff, M. Tue 15:00 

Berkemeier, F. Wed 11:15 

Bernard, F. Tue 16:45 

Berndzen, D. Thu 12:15 

Bernhardt, J. Thu 09:30 

Biamino, S. Tue 12:00, B1-745 

Biermann, H. D3-588 

Biesalski, M. Tue 11:15 

Biswas, S. Wed 15:30 

Bitykov, V. Thu 11:30 

Blankenburg, M. D1-875 

Blobel, S. B6-951 

Blom, P. Wed 14:45 

Blom, P. Thu 15:30 

Blüm, M. Wed 10:30 

Blugan, G. Thu 12:00 

Boccaccini, A.R. Wed 10:00 

Boeff, M. wed 18:00, B5-561 

Böhm, A. B4-590 

Bogdanov, S. B4-223 

Bokeloh, J. A6-339 

Borhani Haghighi, S. Wed 09:45 

Bornemann, N. C6-573 

Borregaard, L.M. Wed 10:15 

Borukhovich, E. Wed 12:00 

Botnaras, S. C6-575 

Bouaziz, O. Tue 14:30 

Boudiaf, A. B4-33 

Boussois, K. Wed 14:45 

Boutefnouchet, H. C1-222 

Bowman, K. A5-927 

Brabec, C. Wed 14:45 

Braun, A. F3-101 

Braun, A. Wed 16:45 

Braun, A. Thu 12:00 

Brinckmann, S. Thu 15:45 

C 

D 

Brisson, E. E1-741 

Bruder, E. Wed 12:30 

Brück, E. Thu 18:00 

Brüggemann, T. Tue 10:45 

Brun, E. X-62 

Brunner, I. wed 17:45 

Bubenheim, K.D. Thu 12:15 

Buchelnikov, V. A3-701 

Buntkowsky, G. A5-1008 

Buntkowsky, G. A5-1009 

Burghard, Z. Wed 18:00, 

Burkart, K. F3-1006 wed 15:30 

Burmester, A. Thu 10:00 

Busch, S. F3-883 

Buss, F. C6-894 

Buss, F. D2-955 

Butnariu, D. B4-413 

Camin, B. Thu 09:45 

Cann, D. Wed 09:15 

Carlesso, M.V. Tue 16:45 

Chang, K. Wed 14:45 

Chen, H. Tue 15:30 

Chen, H. Wed 11:15 

Chen, J. Thu 10:00 

Chen, Y. B4-913 

Chentouf, S. E2-868 

Chérifi, N. Thu 18:15, 

Cherkashinin, G. C3-1123 A5-529 

Chernenko, V. Thu 16:15 

Chernikov, D. B4-752 

Chmelik, D. Wed 15:45 

Choudhary, M.A. Tue 11:30 

Choudhury, S. A7-815 

Chulist, R. Wed 18:00 

Clausen, J. Wed 14:45 

Conradt, R. Tue 11:15 

Croutxé-Barghorn, C. Wed 09:45 

Croutxé-Barghorn, C. Wed 09:45 

Cui, J. Wed 15:15 

Cupid, D. Wed 10:00 

Daamen, M. Thu 09:30 

Danilevicius, P. F5-405 

Danilevicius, P. Tue 12:00, F2-406 

Danilkin, S.A. Tue 17:00 

Daoud, H. Wed 15:30 

Dasgupta, S. Thu 17:00 

Davydov, V. Wed 11:30 

De Cooman, B.C. Tue 13:45 

de Francisco, I. Tue 12:00, C5-459 

De Knijf, D. Thu 15:00 

De Paz, D. Wed 09:45 

de Vicente Lucas, G. Tue 11:15 

Decker, S. Wed 10:00 

Deing, A. F5-431 

This list indicates the presentation time (for example: Wed. 11:40 = Wednesday, 11:40 h) and / or the poster reference number 

(for example: C3-553 = Symposium C3, Poster: 553). List of co-authors can be found in the browsing version. 

64


E 

F 

Demura, M. Wed 15:15 

Depka, T. Thu 11:45 

Deuermeier, J. Wed 12:15 

Diehm, P.M. Tue 17:00 

Diehm, P.M. Wed 11:30 

Diekmann, U. Wed 09:45 

Dieringer, R. Thu 16:15 

Dietrich, G. Thu 09:15 

Digheche, K. C3-1132 

Dimesso, L. Wed 09:15 

Dimonie, D. F1-869 

Dittmer, R. A5-617 

Doblhofer, E. F1-357 

Doenges, B. wed 15:00 

Dommann, A. Tue 10:45 

Draxl, C. Thu 08:30 

Dreyer, C. Thu 10:00 

Driver, J.H. Thu 15:00 

Drotlef, D.-M. F3-791 

Dubberstein, T. Thu 10:30, B2-623 

Duerig, U. Tue 15:30 

Dumont, A. Thu 09:30 

Durst, K. Tue 15:15 

Dutroncy, J. Tue 15:15 

Dutschk, V. Thu 18:00 

Ebersbach, T. Thu 18:15, C3-709 

Eckert, J. Thu 17:00 

Egizabal, P. Thu 15:15 

Ehinger, D. Thu 16:15 

Ehlig, J. B6-409 

Ehmke, M. A5-904 

Eichhorn, M. Tue 16:45 

El-Chaikh, A. Tue 15:45, B1-146 

Elbahri, M. Thu 16:00, A4-737 

Elbahri, M. Wed 16:45 

Elbahri, M. Wed 17:45 

Elbahri, M. Thu 12:30 

Elbert, J. A2-1060 

Ellmer, K. Wed 11:15 

Elrefaey, A. Thu 15:00 

Emmerich, H. Tue 11:15 

Emmerich, H. Tue 11:45 

Engels, P. Thu 17:45 

Entel, P. Thu 16:00 

Erbe, A. Wed 16:45 

Erdogan, E. Wed 17:30 

Erkartal, B. Thu 15:15 

Estrin, Y. Thu 09:15 

Evans, D. Tue 17:45 

Eymann, K. Wed 12:15 

Fahlbusch, N.-C. B4-97 

Farahani, E. C3-3 

Faupel, F. Thu 15:00 

Fecher, M.L. Wed 17:30 

G 

Federmann, H. Wed 15:00 

Fellah, M. F1-940 

Fery, A. Tue 11:45 

Feuerhack, A. B6-391 

Fey, A. Wed 16:00 

Filippini, M. B1-1059 

Fillafer, A. Thu 17:30 

Firrao, D. Thu 16:00 

Fischer, F. Tue 15:00 

Fischer, J. A7-691 

Fiz, R. C7-1062 

Flandorfer, H.C. Wed 11:30 

Fleck, C. Wed 15:30 

Fleck, M. Tue 15:45, B3-810 

Fleischmann, E.-K. Tue 15:15 

Flores, O. Wed 15:45 

Fonovic, M. C4-139 

Franke, P. Tue 17:15 

Freitag, C. Wed 18:00, F3-189 

Fried, M. B4-968 

Frint, P. B7-1036 

Frint, P. Tue 17:45 

Fritsch, S. Wed 10:00 

Fritzsche, H. Thu 11:30 

Fuchs, A. Wed 12:00 

Fürtauer, S. A7-440 

Fuhrmann, L. Thu 10:15 

Fujiwara, K. B4-493 

Fukutomi, H. Thu 12:00 

Funke, H. B4-578 

Funke, H. Wed 16:00 

Furuta, T. Thu 15:15 

Gabrisch, H. Tue 17:45, B1-289 

Gad, A.E. B6-1157 

Galea, L. F3-836 

Gamsjäger, E. Tue 15:15 

Gaouyat, L. Thu 09:30 

Garcia de Cortazar, M. Thu 15:15 

Garcia, J.C. Thu 15:15 

Garipcan, B. Tue 17:45, F2-468 

Garnweitner, G. Tue 17:15 

Garnweitner, G. Thu 11:45 

Gassmann, A. Wed 15:15 

Gehrmann, M. Tue 12:00, F2-291 

Geißler, D. Thu 10:30, B2-838 

Geller, S. Wed 18:00 

Gemming, S. Wed 17:45 

Gerber, O. Wed 10:15 

Gerhard, C. Tue 14:30 

Gerngroß, M.-D. A3-1014 

Gherfi, K. E1-1011 

Ghosh Chowdhury, S. Thu 12:15 

Giertler, A. wed 16:00, B5-609 

Gigler, A.M. Tue 11:15 

Gladitz, M. Tue 15:30 

Glatzel, U. Wed 16:00 

H 

Glaum, J. Wed 10:30 

Glavas, V. Tue 14:45 

Glicksman, M. Wed 11:15 

Göken, M. Tue 17:00 

Göttlicher, M. Thu 10:30, F5-673 

Goldschmidt, H. Thu 10:15 

González-Elipe, A.R. C5-404 

González-Elipe, A.R. Tue 15:45, 

Gorny, B. C5-1089 Thu 15:30 

Gosslar, D. A6-557 

Gotcu-Freis, P. A7-919 

Gottschall, T. A3-432 

Gottstein, G. Tue 15:45 

Gottstein, G. Wed 14:45 

Govindarajan, P. Thu 12:30, F5-374 

Grad, P. wed 15:15 

Grätz, K. Wed 14:45 

Grass, V. C1-19 

Grass, V. C1-53 

Grass, V. Tue 17:30 

Grass, V. Tue 17:30 

Greer, J. Wed 17:15 

Greiner, C. Wed 15:00 

Gries, T. Tue 16:30 

Gries, T. Wed 10:00 

Grigorescu, A. wed 16:00, B5-428 

Grimoldi, E. C5-532 

Gröting, M. A5-384 

Gröting, M. A7-1088 

Groß, T.A. A5-1120 

Großmann, J.N. F3-279 

Großmann, K.K. Thu 12:30 

Gruber, S. Thu 10:15 

Gruber, T. A7-348 

Gruber, W. Thu 11:15 

Grüber, B. Thu 12:15 

Grundler, M. Wed 10:30 

Gruner, M.E. A3-949 

Gu, F. A4-1144 

Guan, J. Wed 12:30 

Günther, T. Wed 17:15 

Gupta, S. Thu 16:00 

Gurlo, A. Wed 12:30 

Gutfleisch, O. Thu 17:30 

Gutfreund, P. Thu 10:15 

Haase, C. Thu 10:15 

Hagemann, R. C2-606 

Hahn, H. Tue 11:30 

Hairer, F. Thu 15:30 

Hajiyani, H.R. A7-174 

Hallstedt, B. E2-412 

Hallstedt, B. Wed 14:45 

Hallstedt, B. Thu 11:30 

Hamann, S. Thu 15:00 

Hamid, N.A. Wed 17:00 

Hartmaier, A. Thu 18:00 



65


I 

Hartmann, J. Thu 15:30 

Hartwig, I. D3-435 

Hasani, F. Tue 17:15 

Hauber, A. Wed 15:30 

Haufe, J. Thu 12:30, D2-416 

Hausbrand, R. A5-556 

Hausmann, J.M. Thu 11:15 

Hausöl, T. Tue 17:00 

Hébert, C. D1-652 

Hébert, C. D1-873 

Heckmann, C.J. Wed 09:15 

Heczko, O. Wed 17:30 

Heidebrecht, A. F3-303 

Heiden, N. Wed 10:15 

Heilmaier, M. Tue 15:30 

Heilmaier, M. Wed 15:30 

Heinemann, S. Thu 10:30, F5-722 

Heinig, A. Wed 15:15 

Helfen, T. Wed 11:15 

Helth, A. Thu 12:30, F5-184 

Hempel, U. Thu 09:15 

Henriques, D. A7-520 

Henß, A. Thu 11:15 

Herr, U. Thu 15:30 

Herzog, P. Thu 17:00 



Hickel, T. A3-1100 

Hickel, T. Thu 12:30, B2-878 

Hilgendorff, P. wed 16:00, B5-471 

Hiroto, Y. Thu 15:15 

Hirsch, J. Thu 11:15 

Hochmuth, C. Thu 11:30 

Hock, R. C6-133 

Hörstermann, H. Tue 12:00 

Hofmann, E. Thu 09:30 

Hohmann, M. Wed 11:45 

Holz, B. Wed 17:00 

Hornig, A. B6-811 

Houshmandpoor, M.S. Wed 17:15 

Hrkac, V. A3-991 

Hu, L. Tue 14:45 

Huang, W. Tue 15:45 

Huber, G. Thu 18:15 

Huber, J. F3-975 

Hultstein, E. Tue 16:30 

Hunger, S. Wed 10:30, B7-501 

Hutchinson, B. Thu 09:45 

Hutsaylyuk, V. B4-408 

Hutsaylyuk, V. B4-411 

Ingendahl, T. , B2-396 

Ingendahl, T. Thu 12:00 

Inoue, H. Thu 11:45 

Inui, H. Tue 10:45 

Ionescu, E. Tue 15:30 

Ionescu, E. Tue 16:30 

J 

K 

Istomin, P. C1-19 

Izui, H. Thu 16:00 

Jaegermann, W. A5-1045 

Jahns, R. Thu 11:45 

Jaiser, S. C1-510 

Jakob, A.M. Wed 12:00 

Jakob, G. A3-987 

Jakobsen, D. Thu 16:30 

Jamin, C. Wed 17:30 

Jöchen, K. Thu 17:15 

Jokisch, S. C7-686 

Jonas, J.J. Thu 10:15 

Juul Jensen, D. Thu 15:30 

Kadem, L. Tue 15:45, F2-646 

Kästner, M. Thu 12:00 

Kaloumenos, M. C6-714 

Kandemir, T. Tue 16:30 

Kang, D.a. B4-445 

Kang, H. C6-923 

Kang, S.-J.L. Tue 17:30 

Karch, A. Wed 10:30 

Kareiva, A. C7-56 

Karimi, F. Wed 12:15 

Karl, C. Thu 15:45 

Karpacheva, G. B6-142 

Karpacheva, G. C1-273 

Karsch, T. wed 15:45 

Kaspar, J. A7-138 

Kauffmann, A. B4-543 

Kauffmann-Weiss, S. A3-555 

Kaufmann, B. Tue 15:30 

Kaysser, W. Tue 11:00 

Keller, T.F. Tue 16:45 

Kern, F. Tue 16:45 

Keßler, B. Thu 09:15 

Khameneh Asl, S. Wed 10:00 

Khatibi, G. Tue 14:30 

Kheloufi, A. B1-256 

Kheradmand, N. Thu 16:00 

Khlopkov, K. Tue 14:30 

Kiick, K. Wed 14:00 

Kilo, M. Tue 15:45, B3-649 

Kim, D.-H. C7-136 

Kim, D.-H. C2-137 

Kim, J.Y. B9-295 

Kim, K.H. B9-1030 

Kim, S.-G. C5-235 

Kim, S.-G. C5-236 

Kirchheim, R. Tue 11:30 

Kirchhof, C. A3-702 

Kirsten, S. F1-592 

Klein, A. Wed 16:00 

Klemm, Y. X-600 

Klochkov, I. Thu 17:15 

L 

Kluge, D. B4-283 

Knaack, S. Thu 12:30, F5-381 

Knauer, A. C7-844 

Knorr, A.F. D2-726 

Kobayashi, S. Tue 15:00 

Kobler, A. Wed 09:15 

Koch, I. Wed 12:30, B5-103 

Koch, I. Thu 15:15 

Kocic, N. Wed 16:45 

Köhler, L. Wed 09:30 

Köster, A. Thu 17:00 

Kohiki, S. A3-126 

Kohler, R. Wed 18:00 

Kohlstedt, H. Thu 10:15 

Kolarik, V. Thu 09:15 

Koll, L. Wed 12:30, 

Kondoh, K. D1-959 Wed 15:00 

Kong, J.-H. Wed 17:45 

Konovalov, S. Thu 18:15, B2-742 

Korbus, M. A2-1066 

Korn, M. wed 17:00 

Kost, J. Tue 14:30 

Kouhi Habibi, M. B9-1158 

Kovacs, S. wed 16:45 

Kovalev, A. Thu 11:45 

Kozlov, A. A7-434 

Krahl, M. Wed 17:00 

Kramer, H. Thu 10:30, D2-346 

Krantz, M.C. A3-671 

Krasovskyi, M. C1-1080 

Kraus, T. Wed 15:45 

Kraus, T. Thu 11:30 

Krechel, C. D2-1000 

Kriegel, M.J. Wed 09:15 

Krill, C.E. Tue 15:45 

Krüger, K. C4-591 

Krüger, M. Thu 11:15 

Krumov, N. Wed 17:30 

Kruzic, J. Tue 11:00 

Krywka, C. Thu 10:00 

Kubon, M. Tue 11:30 

Kucharski, D. C4-387 

Kühn, J. D2-1057 

Kulawinski, D. Thu 09:45 

Kumar, S. Thu 16:15 

Kunadt, A. B6-566 

Kundin, J. Tue 11:45 

Kungl, H. A5-957 

Kunimine, T. C2-1002 

Kunze, T. E3-789 

Kuramoto, S. B7-340 

Kurtovic, A. Tue 11:15 

Kusakin, P. Wed 09:45 

Kuznetsov, S. Wed 10:15 

Lacroix, J. Tue 12:00 

Lage, E. Thu 11:30 



66


Lahoz, R. Tue 15:45, C5-941 

Lahoz, R. Tue 11:45 

Laipple, D. Wed 10:30, F1-443 

Lamprecht, C. F2-630 

Lamprecht, C. Tue 17:15 

Lang, A. Thu 10:00 

Lang, G. Wed 16:00, F3-359 

Lapovok, R. Thu 17:45 

Lardjane, N. A2-37 

Laska, J. Wed 12:30, 

Lazareva, A. F1-1097 Thu 18:15, C3-781 

Le Bourlot, C. Wed 11:45 

Le Gallet, S. Tue 16:45 

Leberl, D. Wed 09:15 

Lee, H.M. Wed 15:15 

Lee, J.H. C4-237 

Leitsmann, R. X-583 

Lejcek, P. Thu 15:45 

Lemloh, M.-L. Wed 17:45 

Lendlein, A. Thu 09:15 

Lennikov, V.V. Tue 12:00, C5-818 

Lennikov, V.V. Tue 12:00, C5-819 

Lenz, M. A3-1049 

Lepple, M. Wed 10:30 

Leyens, C. Wed 11:45 

Leykam, D. Wed 16:45 

Li, A. A1-1155 

Li, D. Wed 16:00 

Li, S. A5-633 

Li, S. Thu 15:00 

Li, Y. Thu 17:15 

Liakos, I. F4-863 

Liakos, I. Tue 15:15 

Liebold Ribeiro, Y. Thu 11:30 

Lim, S.-T. Thu 11:30 

Lips, K.S. F5-494 

Lis, A. Tue 17:45, F2-599 

Lis, A. Wed 09:45 

Lis, A. Thu 16:00 

Liss, K.-D. Thu 18:00 

Liu, F. Tue 11:45 

Liu, Y. Wed 12:30, F1-250 

Liu, Y. Tue 17:00 

Logacheva, A. B4-225 

Lohmann, T. Thu 12:00 

Lolou, S. Thu 10:30 

Loos, S. Wed 17:45 

Lorsch, P. Wed 12:30, B5-831 

Lu, J. B7-1164 

Lu, K. Wed 10:30, 

Lu, K. D1-159 Tue 17:45 

Lu, Q. Thu 17:00 

Lucas, G. Wed 09:30 

Luczak, F. D3-330 

Lüdecke, C. F4-820 

Lüdecke, C. F4-828 

Lüdecke, C. Tue 14:45 

Lukic, M. F1-856 

Lupascu, D.C. C6-523 

Lupascu, D.C. Thu 18:00 

Lysogorskiy, Y. E2-787 

Lysogorskiy, Y. E4-874 

M 

Ma, A. Thu 17:30 

Maamache, B. C3-294 

Mahmood, A. Thu 12:15 

Maibach, J. C6-211 

Maier, V. D2-1114 

Maleki, M. Tue 17:30 

Malinauskas, M. Thu 09:45 

Maltceva, L. Thu 16:15, B2-242 

Mandel, K. Wed 11:15 

Mankel, E. Wed 15:45 

Mannes, D. Thu 12:15 

Mao, W. Thu 16:15, B2-66 

Mao, W. Thu 12:30, B2-511 

Marauska, S. Thu 12:00 

Marceau, R. Tue 17:30 

Marceau, R. Wed 11:15 

Marcinek, D. Wed 12:00 

Marder, J. Wed 11:45 

Maresova, M. B9-1169 

Marichal, C. D2-773 

Markus, T. Wed 10:00 

Markus, T. Wed 17:15 

Marlot, C. B4-727 

Marlot, C. Tue 16:45 

Maron, B. B6-598 

Martin, M. Thu 15:45 

Martin, S. Thu 09:45 

Maruoka, D. Wed 15:30 

Maruoka, T. Thu 10:15 

Matkowski, P. Tue 15:30 

Matsumoto, Y. A1-1156 

Maus, I. Tue 11:45 

Mayer, H. Wed 12:15 

Mayer, S. Thu 17:15 

Mayer, T. Thu 18:15 

Mayrhofer, L. Wed 14:45 

McCord, J. Wed 16:45 

McDonald, K. Thu 11:15 

Meder, F. Tue 17:00 

Medvedev, A. Thu 18:15 

Meena, A. X-664 

Meka, S. Tue 15:45 

Mennerich, C. A3-896 

Mennerich, C. E3-898 

Mera, G. Thu 09:15 

Merchan, M. Thu 15:15 

Meyners, D. Thu 11:15 

Michna, J. Tue 15:00 

Milde, M. A4-1154 

Milkereit, B. A6-204 

Mimoto, T. Thu 17:15 

Mishra, Y.K. Tue 17:00 

N 

Missirlis, D. Tue 15:45, F2-690 

Miura, H. Thu 10:15 

Miura-Fujiwara, E. F1-1143 

Mizunuma, S. Wed 11:45 

Mochales, C. Wed 12:15 

Molnár, P. D1-148 

Molnár, P. Tue 17:30 

Molodov, D. Tue 10:45 

Molodov, D. Thu 16:15 

Molotnikov, A. Thu 15:00 

Mondragón Rodriguez, A7-506 

G.C. Monier, A. C4-681 

Morita, K. Wed 10:15 

Mortazavi, H. D2-1153 

Motemani, Y. Wed 11:30 

Mountasir, A. Wed 16:45 

Mowlaie, P. C3-3 

Mroßko, R. Tue 12:00 

Mrovec, M. Thu 15:00 

Mrovec, M. Thu 15:15 

Müller, M. A7-881 

Müller, M. Thu 09:15 

Müller, R. Thu 11:30 

Müller, T. wed 17:15 

Müller, U. Tue 17:30 

Murasawa, G. Thu 15:45 

Murphy, B. Thu 12:30 

Mushongera, L. Thu 10:30, A1-175 

Music, D. Wed 14:45 

Musina, A. Wed 11:15 

Mustonen, T. Thu 16:00 

Mutlu, I. F1-1038 

Mutlu, I. F1-1039 

Mutlu, I. B4-1138 

Mutlu, I. Thu 18:15, 

B2-1040 

Nachtrab, J. B6-550 

Nadimpalli, R. Wed 17:30 

Nadutkin, A. C1-19 

Nadutkin, A. Tue 17:30 

Nanko, M. Thu 09:45 

Naumenko, D. C1-851 

Nazarov, A.V. Wed 12:30 

Nebe, J.B. Tue 11:45 

Neef, C. Wed 09:30 

Negahdari, Z. Wed 15:30 

Neibecker, P. B9-1168 

Nemati, N. B4-224 

Nemati, N. C1-1124 

Neumeier, S. Thu 10:30 

Nguyen, H.T. Thu 17:15 

Niemann, R. A3-172 

Niendorf, T. Thu 12:00 

Nier, M. C4-267 

Nooeaid, P. Wed 10:30, F1-49 

Notten, P.H.L. Tue 16:30 



67


O 

P 

Ocylok, S. Thu 12:30 

Oehring, M. B1-463 

Oehring, M. Tue 16:30 

Okumiya, M. C4-290 

Orend, J. E1-1165 

Ortwein, H.-P. Wed 12:30, B5-826 

Ostroushko, A. Tue 15:45, F2-1098 

Otalvaro, D. Wed 15:15 

Ottmann, A. A7-449 

Oveisi, E. Wed 10:30, 

Ovsianikov, A. D1-1035 Thu 09:30 

Owczarek, S. C1-790 

Owczarek, S. C1-798 

Ozhukil Kollath, V. F1-1159 

Paidar, V. Tue 14:30 

Pallez, K. Tue 15:15 

Pan, Y. Wed 15:15 

Pana, M.A. Wed 17:15 

Pap, J.-S. B6-974 

Pardun, K. Wed 12:00 

Park, S.-M. A1-689 

Paul, J.D.H. Tue 17:15 

Pavlova, V. E1-454 

Pekkola, O. A5-113 

Pelic, B. Wed 10:00 

Perento, J. A3-693 

Perlovich, Y. Thu 12:30 

Peters, K. Thu 15:45 

Petrov, R. Wed 17:45 

Petzold, C. Tue 15:00 

Pfeiffer, C. Thu 15:45 

Pfeiffer, J. Thu 16:15, C3-563 

Pfeiffer, J. Thu 15:00 

Pfeiffer, J. Thu 15:15 

Pflumm, R. Thu 09:45 

Pillai, R. Thu 09:15 

Pinneker, V. A3-677 

Piorra, A. A3-505 

Piorra, A. Thu 12:15 

Planes, A. Thu 17:00 

Pleul, M. Thu 12:30, A1-866 

Ploux, L. F4-829 

Ploux, L. Tue 15:45 

Pötschke, P. Wed 17:45 

Pohl, M. Thu 09:45 

Pontiller, P. Thu 10:15 

Popa, V. Tue 17:45, F2-363 

Poshtan, E.A. Tue 11:15 

Poulin, P. Tue 10:45 

Prajapati, N. E3-567 

Prajer, M. Tue 12:00, A2-337 

Preiss, U. Wed 15:30 

Prenzel, T. Wed 17:00 

Prill, M. A7-522 

Prinz, C. Tue 16:30 

Q 

R 

Pröll, J. A7-707 

Pyczak, F. Tue 15:15 

Qian, T. Wed 09:15 

Qu, S. Tue 12:00, B1-976 

Quer, A. A3-1020 

Quinsac, A. Wed 12:15 

Quiroga Gonzalez, E. Wed 12:30 

Raabe, D. Wed 16:45 

Raabe, D. Wed 17:15 

Race, C. Wed 10:30 

Rafique, M. Thu 10:00 

Rahn, J. A7-544 

Rank, A. A2-637 

Rank, A. Tue 11:30 

Ratayski, U. Wed 11:15 

Rehfeldt, F. Tue 15:00 

Reibstein, S. Tue 17:30, B3-170 

Reif, M. Wed 12:00 

Reinhardt, M. Wed 17:30 

Reinholz, B. A3-852 

Reinold, L.M. Wed 12:00 

Renk, O. Wed 10:15 

Repp, F. Thu 12:15 

Repper, J. Wed 11:15 

Reshi, H.A. Wed 18:00 

Revaud, M. Thu 09:15 

Reverey, J. Tue 15:15 

Rey García, F. Tue 12:00, C5-906 

Rey García, F. Tue 15:45, C5-911 

Rezwan, K. Tue 17:45 

Riccardi, L. A3-672 

Ried, P. Tue 14:45 

Riekehr, L. A7-783 

Rigole, S. Wed 09:45 

Rios, P. Wed 11:45 

Rödel, J. A5-1044 

Rösemann, N. Wed 17:00 

Rösler, J. Wed 15:45 

Rößler, U.K. A3-893 

Rohde, M. Tue 11:30 

Rohrer, J. Wed 15:15 

Rojac, T. Wed 10:00 

Rollett, A. Wed 09:45 

Romberg, J. A3-71 

Romberg, J. Tue 16:45 

Rosiepen, C. C4-796 

Rosin, A. Wed 16:00 

Roters, F. Thu 09:15 

Roth, G. Wed 10:00 

Rothenstein, D. Wed 17:00 

Roy, I. F1-1131 

Rudisch, C. A7-176 

Ruppert, M. Tue 17:15 

Russkih, O. C7-1096 

S 

Saberi, A. X-867 

Saberi, A. Tue 17:45 

Sapper, E. A5-549 

Sato, H. Wed 12:00 

Sato, S. D1-355 

Sauer, H.M. C6-572 

Sauter, T. Tue 12:00, 

Schafföner, S. A2-1019 X-779 

Scharfe, B. C4-519 

Scharnweber, D. Tue 14:30 

Scheler, T. Thu 16:15 

Schell, N. Wed 12:30, 

Scheuermann, S. D1-534 Wed 18:00, F3-917 

Schiller, S. Wed 15:00 

Schimanski, K. Thu 15:45 

Schindler-Saefkow, F. Tue 11:30 

Schlicker, L. Wed 12:00 

Schliephake, D. Tue 15:45, B1-335 

Schloth, P. Thu 17:45 

Schlüter, K. Wed 17:15 

Schmechel, R. Thu 17:30 

Schmid-Fetzer, R. Wed 09:30 

Schmidt, C.W. Tue 16:30 

Schmidt, D. Tue 15:30 

Schmidtchen, S. Thu 11:45 

Schmitt, M. C6-704 

Schmitz, G. Tue 12:00 

Schnabelrauch, M. Wed 09:30 

Schneider, D. Tue 11:15 

Schneider, N. wed 17:30 

Schnurre, S.M. A7-876 

Schröder, H.C. Wed 11:30 

Schroeter, M. A2-1016 

Schüler, P. Wed 16:00, F3-857 

Schütte, P. Wed 10:15 

Schütz, A. Wed 10:30, 

Schuh, C. D1-605 Wed 08:30 

Schulz, C. Wed 17:15 

Schulz, K. Thu 18:00 

Schulz, M. Thu 12:00 

Schulze, K. Thu 16:00 

Schulze, V. E1-771 

Schumacher, J. B6-971 

Schumacher, M. Thu 12:30, F5-213 

Schumacher, T. Wed 10:30, F1-546 

Schuster, E. A7-895 

Schwab, E. Thu 10:30, F5-674 

Schwabe, J. Thu 18:00 

Schwaighofer, E. Tue 15:45, B1-252 

Schwankl, M. Wed 15:00 

Schwartz-Albiez, R. F1-700 

Schwartz-Albiez, R. Thu 09:15 

Schwittek, P. Thu 18:15 

Seemüller, C. Tue 11:45 

Seetharaman, S. B9-6 

Seetharaman, S. Thu 17:00 



68


Segel, C. B7-586 

Seide, G. Tue 16:30 

Seide, G. Wed 10:00 

Sekkal, A. E3-354 

Senger, J. wed 18:00, B5-853 

Senn, M. E1-458 

Seriani, N. Wed 15:45 

Seyring, M. Wed 09:45 

Shahabi, H.S. Tue 15:45, B3-746 

Shamanian, M. C3-3 

Shan, Y. E2-57 

Shan, Y. E2-788 

Shchyglo, O. E2-451 

Shiota, I. C1-1167 

Shvartsman, V. Thu 09:45 

Shvindlerman, L. Tue 16:30 

Sidorenko, E. C1-984 

Simon, J.C. Wed 09:15 

Singh, J. C7-1073 

Singh, T. Tue 16:45 

Siqueira, C.J.M. Wed 11:45 

Sirringhaus, H. Thu 15:00 

Skokov, K. A3-827 

Skorb, E. Tue 17:15 

Skrotzki, W. Wed 14:45 

Smarsly, B. Wed 12:30, 

Smarsly, B. D1-885 Thu 12:00 

Smolianets, R. B7-373 

Solis Herrera, A. F3-94 

Soltysiak, S. X-166 

Sorich, A. D2-759 

Souleiman, M. Thu 12:30, A1-61 

Southan, A. A2-1018 

Spatz, J. Tue 14:30 

Specht, U. Thu 17:45 

Spitz, S. Wed 09:30 

Sprute, T. Wed 09:45 

Staeck, A. D1-738 

Ståhle, P. Thu 17:30 

Stampfl, J. F5-380 

Stampfl, J. Tue 11:30 

Stark, A. D1-761 

Steier, V. B4-1099 

Stein, F. Tue 11:30 

Steinmann, W. Tue 16:30 

Steinmann, W. Wed 10:00 

Stieben, A. Thu 17:45 

Stitz, N. Wed 18:00, 

Stolpe, M. F3-1004 Tue 12:00 

Storm, J. E3-117 

Stoychev, G. Tue 12:00, 

Straub, T. A2-1063 Wed 11:30 

Straumal, B. Y1-48 

Straumal, B. Tue 15:15 

Strauss, L.G. Thu 09:30 

Strößner, J. B4-631 

Strunskus, T. Thu 10:30 

Studnitzky, T. Thu 10:30 

T 

Su, B. Tue 17:00 

Sujith, R. Thu 12:30 

Sumkauskaite, M. Thu 09:45 

Surm, H. Thu 17:15 

Sutherland, D. Tue 10:45 

Suzuki, S. D1-7 

Synytska, A. Thu 17:00 

Szillies, S. C4-947 

Takeda, M. Wed 16:00 

Takizawa, T. Wed 16:00 

Tasan, C. Thu 12:30, B2-909 

Tasan, C. Wed 15:45 

te Nijenhuis, H. D1-849 

Teizer, W. Tue 12:00, F2-325 

Teizer, W. Thu 15:45 

Teloeken, A. X-660 

Thieme, R. C6-682 

Thim, G.P. C7-46 

Thomas, D. A7-141 

Tillmann, W. Thu 15:00 

Tolvanen, A. Wed 12:15 

Torger, B. Thu 09:15 

Tosatti, S. Wed 12:30, F1-912 

Tournier, R. Tue 10:45 

Tournier, R. Tue 11:15 

Tovar, G. Wed 10:15 

Trautmann, M. C4-410 

Tritschler, M. Thu 16:15 

Tschukin, O. E2-305 

Tsurekawa, S. Tue 15:30 

Turkoglu, O. C4-216 

Turnow, H. A6-134 

U 

Unterauer, B. Thu 17:45 

V 

Vad, T. Wed 10:00 

Vadalá, M. Thu 11:15 

Vaes, M. Thu 10:00 

van der Zwaag, S. Tue 14:45 

van der Zwaag, S. Wed 17:30 

van Houtte, P. Wed 09:15 

Van Petegem, S. Thu 10:30, D2-645 

Van Petegem, S. Wed 11:45 

Van Swygenhoven, H. Wed 18:00 

Vasilieva, T. Tue 14:45 

Vega Vega, J.M. C4-517 

Velasco Sanchez, M.A. Thu 15:30 

Vestweber, N. Tue 17:00 

Vetter, M. Thu 16:15, C3-420 

Vicario, I. Thu 17:30 

Viehland, D. Thu 14:00 

Vilbrandt, N. A5-185 

Vilbrandt, N. Wed 15:45 

Villa, E. Wed 11:45 

Völkl, R. Thu 10:15 

Volkov, A. Thu 10:00 

von Seggern, F. C6-668 

von Seggern, H. A5-1046 

Vondrous, A. Tue 12:00 

Voskoboinikov, R. Tue 17:30 

W 

Wadewitz, D. A7-276 

Wagner, S. Tue 14:30 

Walter, H. Tue 14:45 

Wang, L. Tue 17:45, B1-169 

Wang, T. E4-214 

Wang, Z.L. Wed 18:15 

Warszynski, P. Tue 10:45 

Watanabe, T. Tue 14:30 

Weber, G. Thu 17:30 

Weber, S. Thu 18:15, B2-306 

Weber, S. Thu 16:00 

Webler, R. Thu 10:30, D2-964 

Weck, D. B6-500 

Weidner, A. Thu 10:30, B2-310 

Weidner, A. Wed 10:15 

Weimer, C. Thu 10:30 

Weinmann, M. F4-402 

Weisheit, L. A3-203 

Welsch, A.-M. Tue 15:00 

Wendler, M. Thu 12:15 

Wengeler, L. Wed 15:45 

Wenk, M. Tue 11:30 

Weygand, D. Wed 12:30 

Weyrich, N. Thu 15:30 

Wilamowska, M. Tue 17:15 

Wilde, G. Tue 15:15 

Wilde, G. Tue 17:15 

Winkler, A. Wed 17:45 

Winter, S. B4-286 

Winterstein, A. Tue 17:15 

Winzer, N. Thu 17:00 

Wiora, N. Tue 15:00 

Wischke, C. Tue 15:00 

Witte, M. Tue 15:45 

Witte, R. Tue 11:45 

Woizeschke, P. Thu 10:15 

Wolf, S. Thu 10:00 

Woltmann, B. Thu 10:30, F5-916 

Woltmann, B. Thu 09:15 

Wondraczek, L. B3-334 

Wu, J. Wed 10:30 

Wu, K. Tue 17:00 

Wu, S. B4-234 

Wu, X. Wed 17:00 

Wüstefeld, C. Wed 09:15 

Wulfhorst, J. Tue 16:30 

Wulfhorst, J. Thu 17:30 

Wulfmeier, H. Wed 17:30 

Wuttig, M. Thu 09:15 

Wyrwa, R. Tue 17:45, F2-805 



69


X 

Xia, K. Thu 17:30 

Xiao, L. Thu 16:00, 

Xiao, T. A4-1082 B6-1078 

Xu, B. A5-418 

Xu, X. Thu 15:45 

Y 

Z 

Yampolskii, S. Wed 15:30 

Yang, C. Wed 11:30 

Yang, Y. B9-258 

Yarar, E. A3-683 

Yekehtaz, M. C4-109 

Zakharchenko, S. F3-22 

Zamanzade, M. Tue 15:00 

Zan, N. Thu 15:00 

Zanini, S. F4-669 

Zargaran, A. Thu 16:15, B2-332 

Zaslansky, P. Wed 16:00, F3-452 

Zavdoveev, A. D1-198 

Zavdoveev, A. Wed 09:30 

Zenk, C. B4-706 

Zhang, F. B8-1163 

Zhang, S. Thu 11:15 

Zhao, J. Wed 11:45 

Zhukov, S. Wed 09:45 

Zhukov, S. Thu 11:45 

Zhuravleva, K. F1-164 

Zichner, R. Thu 17:45 

Zickler, G. Wed 14:45 

Zöllner, D. Wed 12:15 

Zschausch, F. Wed 17:15 

Zschenderlein, U. Tue 15:45 

Zukauskas, A. Tue 10:45 



70

Deutsche 

Forschungsgemeinschaft

Materials Science Engineering (MSE - DGM

Create successful ePaper yourself

Delete template?

Save as template?