PALLMANN Product Guide

SURFACE TREATMENT | WATER-BASED PRODUCTS
1- AND 2-COMPONENT LACQUER
PALL-X EXTREME
Water-based 2-component wood floor lacquer. For flexible use with or without a hardener,
on all common wood types. This new PALLMANN VARIOTEC technology, offers
an even wider variety of applications. As a 2-component version (with the hardener
component B) it can be used for very high traffic areas, such as shops, restaurants
or schools without any problems. In normal to heavy areas the lacquer can be used
without the hardener.
Suitable for the surface treatment of:
• sanded wood flooring in heavy wear
areas such as schools, offices etc.
• suitable for use over underfloor heating
systems
• woodblocks RE
+ very flexible
+ excellent filling capacity
+ very good flow and levelling capacity
+ very resistant to abrasion
+ resistant to extremely high degrees
of chemical wear
+ very resistant against kick- and
burnt marks
+ easy to clean
– for the 2-component version, the components
have to be mixed together
– low-odour but not completely
solvent-free
Item no. Package size Gloss value Consumption GISCODE
69377 5 l semi-gloss approx. 100 – 120 ml/m 2 W3/DD+
69379 5 l matt approx. 100 – 120 ml/m 2 W3/DD+
Hardener
69378 0,5 l – approx. 100 – 120 ml/m 2 W3/DD+
2-COMPONENT LACQUER
PALL-X PURE
Water-based 2-component wood flooring lacquer that maintains the natural matt
appearance of untreated wood. High resistance to chemical and mechanical wear.
Suitable for the surface treatment of:
• sanded parquet and wood flooring
in normal wear areas
• fully sanded pre-finished wood flooring
• suitable for use on underfloor
heating systems
+ natural and matte appearance
+ excellent filling capacity
+ easy to apply
– not ready to use
(components A and B have to be mixed)
– can not be applied on colored/dark
wood floors
– not solvent-free
Item no. Package size Gloss value Consumption GISCODE
74927 5 l + 1 l special matt approx. 80 – 100 ml/m 2 W3/DD+
17