Type 322 Auping Match - Auping Service Manual

3. Preparing for use
3.1 Components of your mesh
base
- Auping Match mesh base.
- A box containing mattress anchors.
3.2 Fitting the mattress
Put your bed in the horizontal
position. Put the mattress on the
mesh base and centre it.
Make sure that the 3 protruding
clip-on pins of the anchors are
pushed widthways into the mesh
(see fig. 2).
fig. 2
‘Click’ the anchors into the mesh at
the positions indicated (see fig. 3).
Make sure that the anchors are not
directly above a cross bar.
fig. 3
3.3 Preparing for use
Check that the mesh base can move
freely. Only adjust the mesh base
while it is in a horizontal position,
securely fixed to the supporting legs,
or to the supports provided within
the bed surround.
Check that the mattress is attached
to the mesh base properly.
3.4 Tips for use
A new mattress has a certain
amount of rigidity, which will
disappear within a few days.
Consequently, your mattress will not
optimally follow the contours of the
mesh base when it is initially
adjusted. We therefore recommend
that you lie down on the mattress
while adjusting the positions for the
first time.
1699 Auping GBA_322 BW.pdf - pag.21 LET OP !!! Lage resolutie!
February 13, 2006
GB 5