Service manual Mini Crosser M1 ver. 2.00
Service manual Mini Crosser M1 ver. 2.00
Service manual Mini Crosser M1 ver. 2.00
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Medema Production A/S<br />
Det er kun tilladt at: Reducere Speed, Deceleration time, ændre<br />
Operation Settings og Throttle Settings.<br />
Brake Disconnected Alarm Off<br />
Brake Fault Detect On<br />
Brake Light On<br />
Freewheel Speed Limit 200<br />
Freewheel Time Out (0,01 sec) 200<br />
Freewheel Enable Disable<br />
Inhibit 2 Horn Input Enable (S120/140 Only) Off<br />
Current Limit Max (Amps)<br />
Motor Settings<br />
130<br />
Boost Drive Current (Amps) 180<br />
Boost Drive Time (Seconds) 10<br />
Current Foldback Threshold (Amps) 100<br />
Current Foldback Time (Seconds) 20<br />
Current Foldback Level (%) 80%<br />
Motor Cooling Time (Seconds) 15<br />
Current Foldback Temp (Deg C) 50 °C<br />
Current Limit Min (Amps) 40<br />
Motor Compensation (milli-Ohms) 5<br />
AntiRollback Level 25<br />
Pull-away Delay (centi-Seconds) 30<br />
Slope Factor 1275<br />
Anti Rollback Velocity 100<br />
Braking Current Limit (Amps) 200<br />
Timed Foldback Braking Current (Amps) 200<br />
Timed Foldback Speed (%) 100<br />
Factory Settings<br />
Max Min<br />
Acceleration (0,1 Seconds) 100 1<br />
Deceleration (0,1 Seconds) 100 1<br />
Forward Speed (%) 100 0<br />
Re<strong>ver</strong>se Speed (%) 100<br />
Throttle Settings<br />
0<br />
Throttle Type<br />
1<br />
(0 = Single-ended, 1 = Wig-wag, 2 = Unipolar)<br />
Throttle Deadband (%) 10<br />
Throttle Gain (%) 130<br />
Throttle Operated at Power-up<br />
(0 = Drive, 1 = Inhibit, 2 = Trip)<br />
2<br />
Throttle Reference Test On<br />
ISO Test Resistor ON<br />
<strong>Service</strong> <strong>manual</strong> P9-0155-S 29 af 70 Version 2.0.0/2010
Change language