LEUChTEn mAdE in GErmAny - CHAMP Licht
LEUChTEn mAdE in GErmAny - CHAMP Licht
LEUChTEn mAdE in GErmAny - CHAMP Licht
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Datenkabel<br />
für rGB Flex Controller<br />
230 V AC / 12 V dC / Tu 40°<br />
90 x 69 x 60 mm<br />
und 115 x 85 x 99 mm<br />
10 m C<strong>in</strong>ch # 6555<br />
Endstecker # 6556<br />
rS 232 # 6557<br />
data cable for<br />
rGB Flex Controller<br />
Fernbedienung<br />
remote control<br />
# 6549<br />
das 10 m C<strong>in</strong>chkabel # 6555 dient zur<br />
datenverb<strong>in</strong>dung zwischen mehreren<br />
rGB-Flex Controllern, damit alle die<br />
gleichen Programme / E<strong>in</strong>stellungen<br />
ausführen. Am letzten Gerät muss der<br />
datenbus mit dem Endstecker # 6556<br />
abgeschlossen werden. das rS232<br />
Kabel wird benötigt, wenn die rGB-Controller<br />
mit e<strong>in</strong>em W<strong>in</strong>dows-Computer<br />
und dem Programm „Color Editor“<br />
selbst programmiert werden soll.<br />
<strong>in</strong>frarot-Fernbedienung zur Steuerung<br />
der rGB-Flex Controller <strong>in</strong>klusive Empfängerbauste<strong>in</strong>.<br />
im normalfall ist pro<br />
Anlage nur e<strong>in</strong>e Fernbedienung nötig,<br />
selbst wenn viele rGB-Flex im E<strong>in</strong>satz<br />
s<strong>in</strong>d, da diese durch die Verb<strong>in</strong>dung<br />
mit e<strong>in</strong>er datenleitung alle Kommandos<br />
synchron ausführen können.<br />
The 10 m c<strong>in</strong>ch cable # 6555 serves<br />
as data connector between several<br />
rGB-Flex Controllers, allow<strong>in</strong>g them to<br />
carry out the same programs / sett<strong>in</strong>gs.<br />
At the last unit, the data bus must be<br />
sealed with an end plug # 6566.<br />
The rS232 cable is necessary if the<br />
rGB-Flex Controller should be programmed<br />
<strong>in</strong>dividually with a<br />
W<strong>in</strong>dows computer and the program<br />
„Color Editor“.<br />
<strong>in</strong>frared remote control for rGB-Flex<br />
Controller <strong>in</strong>cl. receiv<strong>in</strong>g component.<br />
normally just one remote control is<br />
necessary even <strong>in</strong> applications with<br />
several rGB-Flex Controllers.<br />
They can synchronously carry out all<br />
commands if they are connected with<br />
a data cable.<br />
datenkabel / Fernbedienung - data Cable / remote Control 71