SySTEM 2150 - ProConnect GmbH, D-53578 Windhagen

FFC-Lötverbinder für
ZIF- und LIF-Stecker
Lötstifte
Operating Voltage 60 V AC/DC
Current Rating 1,0 A
Contact Resistance 30 MΩ
Isolation Resistance
Dielectric Withstanding Voltage
Configuration
Characteristics
PROCONNECT ELECTRONICS GmbH
Stockhausener Straße 50
D-53578 Windhagen – Germany
PRO-FLEX
SySTEM 2150
500 VAC Min.
Operating Temperature 500 VAC RMS
Isolator -40°... +85°
Contact Phosphor Bronze
Plating TI Alloy plated
Components RAW Materials Spec.
1 Conductor Tin Plated Flat Copper Thickness:. 0,05 or 0,07 +- 0,01 mm
Width: 0,8 ±0,03 mm
Tin plating thickness; 1-3µ
2 Isolation PET film + PET adhesive PET film thickness: 0,019 mm
PET adhesive thickness: 0,024 mm
3 Supporting tape PET film + PET adhesive PET film thickness: 0,188 mm
PET adhesive thickness: 0,032 mm
Andere Materialien auf Anfrage.
Components RAW Materials Spec.
1 Conductor Resistance JIS C-3102 Less than 0,52 Ω/m
2 Isolation Resistance DC 500 V after 1 min. More than 1.000 MΩ/m
3 Dielectric Strength AC 500 V for 1 min. No breakdown
4 Open / Short Test Tester DC 3,0 V / 0,1 mA Pass
5 Heart Resistance 85°C, 96 hrs Isolation resistance and
Dielectric strength pass
6 Moisture Resistance 40°C, 95% RH, 96 hrs Isolation resistance and
Dielectric strength pass
7 Flame Test UL 94 V0-1 Pass
8 Flexing Test 10 mm R x 10 cm x 10 cycle/min. More than 1.000.000 cycles
9 Bending Test (180°C)
Phone: + 49 (0) 26 83 / 94 90 06
Fax: + 49 (0) 26 83 / 94 90 08
E-Mail: office@proconnect-electronics.de
Web: www.proconnect-electronics.de