MAC-Feindreheinsätze MAC Micro Adjustable Cartridges
MAC-Feindreheinsätze MAC Micro Adjustable Cartridges
MAC-Feindreheinsätze MAC Micro Adjustable Cartridges
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
<strong>MAC</strong>-Montageanleitung<br />
<strong>MAC</strong> Assembling Instructions<br />
Schrägeinbau für <strong>MAC</strong> - FSL 10<br />
Oblique assembly for <strong>MAC</strong> - FSL 10<br />
für <strong>MAC</strong> - FSR 10 spiegelbildlich<br />
for <strong>MAC</strong> - FSR 10 laterally reversed<br />
d = Bearbeitungsdurchmesser<br />
Machine diameter<br />
d 1 = Grundkörperdurchmesser<br />
Body-diameter<br />
* für d < 22 mm: Bohrung Ø 10 H6 durchgehend<br />
for d < 22 mm: bore Ø 10 H6 must go through<br />
** oder Freistich DIN 509 - E 0,6 x 0,2<br />
or undercut DIN 509 - E 0,6 x 0,2<br />
*** an der gesamten Kontur<br />
at the complete contour<br />
Vertikaleinbau für <strong>MAC</strong> - FVL 10<br />
Vertical assembly for <strong>MAC</strong> - FVL 10<br />
für <strong>MAC</strong> - FVR 10 spiegelbildlich<br />
for <strong>MAC</strong> - FVR 10 laterally reversed<br />
d = Bearbeitungsdurchmesser<br />
Machine diameter<br />
d 1 = Grundkörperdurchmesser<br />
Body-diameter<br />
* für d < 23,4 mm: Bohrung Ø 10 H6 durchgehend<br />
for d < 23,4 mm: bore Ø 10 H6 must go through<br />
** oder Freistich DIN 509 - E 0,6 x 0,2<br />
or undercut DIN 509 - E 0,6 x 0,2<br />
*** an der gesamten Kontur<br />
at the complete contour<br />
192<br />
www.LMT-tools.de