APE FORCE ONE®

ape labs apeforceone user manual
CONFORMITIES
Herewith, ape labs Lichtprodukte GmbH declare that the remote control
is in accordance with the basic requirements and the other relevant
regulations of the directive 1995/5/EC. The APE FORCE remote control is
approved for operation in EU, USA and EFTA countries.
LVD:EN60598,EN62031,EN62471
EMC:EN55015,EN60825,EN301 489
RF:EN300 220
GENERAL INFORMATION
The radio transmission is on a non-exclusive transmission path which
means that there is a possibility of interference occurring. Other interfering
sources can be caused by switching operations, electrical motors or defective
electrical devices.
english
The range of transmission within buildings can greatly deviate from open air
distances. Besides the transmitting power and the reception characteristics
of the receiver, environmental influences such as humidity in the vicinity and
local structures also play an important role.
The battery
The device uses a battery. The battery lasts about 0,5 years.
The status of the battery will be a indicated in the display.
On and Off
To turn on, press any button. The device will be turn off automatically after
a short time.
11