THERMOLAST K - Kraiburg TPE

CO/PA Series – Adhesion to PA, black
Colour
Hardness
DIN 53505 / ISO 868
Sh A
THERMOLAST ® K
This datasheet is an extract of the KRAIBURG TPE program. Please contact KRAIBURG TPE to select the compound suitable for your
requirements.
Remark:
The information provided in this documentation corresponds to our knowledge on the subject at the date of its publication. This information may
be subject to revision as new knowledge and experience becomes available. The results of our tests are determined by sample check and mean
only a technical description of our products. It shall not absolve the customer of the responsibility to make tests for his intended process or
purpose. Therefore, KRAIBURG TPE makes no warranties and assumes no liability in connection with any use of this information.
© 2012 by KRAIBURG TPE GmbH & Co. KG, 09 November 2012
CO/PA Series – Adhesion to PA
Density
DIN EN ISO 1183-1:2004
g/cm³
Tensile strength 3
DIN 53504 / ISO 37
N/mm²
Elongation at break 3
DIN 53504 / ISO 37
%
Tear resistance
ISO 34-1 method B (b)
(Graves) N/mm
Adhesion to PA 6 1
acc. to Renault test
D411916 - N/mm
Adhesion to PA 6.6 1
acc. to Renault test
D411916 - N/mm
Compression Set
ISO 815
%
TC2PAZ black 25 1.15 0.9 400.0 7.0 3.0 3.0 34 77 87
TC3PAZ black 30 1.15 1.5 400.0 8.0 4.5 4.5 33 73 80
TC4PAZ black 40 1.15 2.0 450.0 10.0 6.0 6.0 32 75 83
TC5PAZ black 50 1.15 2.5 450.0 12.0 8.0 10.0 30 79 80
TC6PAZ black 60 1.15 3.0 400.0 16.0 11.0 11.0 28 80 81
TC7PAZ black 70 1.15 3.0 350.0 17.0 13.0 13.0 34 80 85
TC8PAZ black 80 1.15 5.0 350.0 23.0 16.0 16.0 34 81 82
72h/
23°C
22h/
70°C
22h/
100°C
KRAIBURG TPE GmbH & Co. KG Friedrich-Schmidt-Strasse 2 D-84478 Waldkraiburg GERMANY
subject to change and error
check www.kraiburg-tpe.com for the latest version
34