HDPE Drainage Products - ACF Environmental

More documents

Recommendations

Info

8 Standard Corrugated Pipe ADS single-wall corrugated <strong>HDPE</strong> pipe is ideal for drainage projects where flexibility, light weight, and low cost are important. It is available in 3" to 24" diameters, and sold in coils through 8" and 20-foot lengths in larger sizes. Multiple drainage applications ADS pipe has been used for decades on farms, golf courses, parks and playing fields to keep surfaces dry by channeling away excess underground moisture. Homeowners find it to be an economical, easy-toinstall solution to all kinds of residential drainage problems: downspout run-offs, foundation and window well drains, driveway culverts, and wet spots on the lawn. ADS single-wall pipe is also used for highway edge drains and other construction applications where economy and durability are important. Perforated and non-perforated For subsurface water collection or leaching action, ADS pipe is offered with uniform slots and drilled holes. Non-perforated pipe is available when water must be moved by gravity flow from one point to another. Additional information: 1. AASHTO Specification M252 2. AASHTO Specification M294 3. ASTM D2412 4. ASTM D405 5. ASTM D667 6. ADS Tech Note 2.115, “Comparative Pipe Stiffness” 7. ADS Tech Note 4.103, “Plastic Pipe Design” by James B. Goddard
StormTech Chambers StormTech underground chambers can function as storm water detention, retention, “first flush” storage systems, or a combination of these. They can be installed in commercial, municipal, industrial and residential projects. They are engineered to exceed AASHTOʼs LRFD recommended design factors for Earth Loads and HS-20 live loads. The chambers convey water laterally through their sidewall openings, as well as through the angular stone foundation and backfill, to maintain a constant elevation in a bed. They allow for the storage of large storm water volumes at minimum depths. The durable, chemical-resistant polypropylene chambers are offered in two sizes: (1) the SC-740 chamber provides a minimum of 2.2 ft3 /ft2 of storage, and (2) the SC-310 low profile unit allows 1.3 ft3 /ft2 minimum of storage. Chambers can be cut at 6.5" intervals, providing excellent design flexibility for nearly all sites. They can be centralized or decentralized, configured into beds or trenches of varying sizes and shapes, and installed easily around utilities or other obstructions. Two people can safely and efficiently form rows of chambers without complicated connectors, special tools or heavy equipment. StormTech Isolator Row The Isolator Row is a patent-pending structure that acts as an extended subsurface detention basin, allowing water to exit through its surrounding filter fabric while sediment is trapped within. The Isolator Row inexpensively enhances TSS removal, and can be equipped with inspection ports for fast and easy maintenance and cleaning. The geotextile covering prevents the migration of fines out of the row while maintaining adequate hydraulic flows. Several geotextiles can be specified for use with the Isolator Row, depending on soil and site conditions. A list of suitable geotextiles is available from ADS. Additional information available from stormtech.com 9
Page 1 and 2: HDPE Drainage Products Helping the
Page 3 and 4: Advanced Drainage Systems: the worl
Page 5 and 6: material loss rate of HDPE is only
Page 7: Years of field and laboratory evalu
Page 11 and 12: Nyloplast ® Surface Drainage Produ
Page 13 and 14: DrainTech Drain Basins, Channels a
Page 15 and 16: AdvanEDGE ® Pipe AdvanEDGE is a pa
Page 17 and 18: Small Diameter N-12 Fittings ADS of
Page 19 and 20: Market/Technical Support ADS is mor

HDPE Drainage Products - ACF Environmental

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?