EN - technicke informace 2012:EUM.qxd

More documents

Recommendations

Info

6 5 TECHNICAL INFORMATION Basic terms and concepts Flame-spread resistance (Self-snuffing ability): Flame-spread resistant products cannot flash or if they flash, they cannot further burn, when a source of flame is removed. The test is performed with exactly specified source of flame. Tested sample passed the test, if: - it didn’t flash - in case of flash the flame or glow expires within 30 s after the test source of flame is removed, the packing paper didn’t flash and the board under tested sample isn’t chard. Excess heat and combustion resistance: Parts of isolation material that could be subject of heat stress caused by electrical effects and that could break safety are not allowed to be affected too much by excessive heat and combustion. The test is performed using flaming loop. Tested sample passed the flaming loop test, if: - no flame or lasting glow is visible - flames and glow on tested sample expire within 30 s after the flaming loop is removed - the silk paper didn’t flash and the board under tested sample isn’t chard Heat resistance: Isolation material parts necessary for fixing power current parts and/or protective circuit parts in their position are subject of steel ball compression test. Tested sample passed the test, if the impress diameter caused by the ball doesn’t exceed given size under given temperature. Trade mark of KOPOS KOLÍN a.s. The meaning of marks used with the products of KOPOS KOLÍN a.s. The approval mark of EZÚ PRAHA – indicates compliance with Czech electrical standard. The approval mark of EVPÚ a.s. NOVÁ DUBNICA – indicates compliance with Slovak electrical standard. Product designed for installation in hollow walls (850 °C in compliance with ČSN 34 5615). Product designed for installation in concrete (650 °C in compliance with ČSN 34 5615). Compliance mark with Russian quality certification system. Compliance mark with EU directions for particular product. Compliance mark with Russian fire-safety certification system. The approval mark of VDE – test and certification institute in Offenbach. Indicates compliance with German electrical standard. Test temperature of flaming loop in compliance with ČSN 34 5615-84. Product material labeling in compliance with ČSN 77 0052. Mark of conformity with a Belorussian system of technical standards. Mark of conformity with a Ukrainian system in a field of fire safety.
IP1 - pipe pallet dimension: 120 x 80 x 63 cm EAN: 8595057687660 IP3-1 - wooden pallet EUR dimension: 120 x 80 cm EAN: 8595057687684 BM - small box dimension: 52 x 30 x 30 cm EAN: 8595057688209 M6500 - drum M220 dimension: 225 x 116 cm EAN: 8595057687769 M6502 - steel drum dimension: 230 x 116 cm EAN: 8595568910639 Returnable packages IP10 - metal pallet dimension: 180 x 120 x 82 cm EAN: 8595057688230 IP3-3 - wooden pallet dimension: 160 x 240 cm EAN: 8595057687677 BS - medium box dimension: 80 x 60 x 60 cm EAN: 8595057688216 PR - container 357-515 dimension: 60 x 40 x 40 cm EAN: 8595057687745 TECHNICAL INFORMATION IP2 - metal box dimension: 120 x 80 x 60 cm EAN: 8595057687653 IP8 - simple pallet dimension: 80 x 120 cm EAN: 8595057688247 BV - large box dimension: 120 x 80 x 60 cm EAN: 8595057688223 IP4 - wooden base dimension: 250 x 65 cm EAN: 8595057687707 IP5 - wooden base dimension: 300 x 65 cm EAN: 8595057687714 IP7 - wooden base dimension: 200 x 65 cm EAN: 8595057687738 5 7
Page 1 and 2: TECHNICAL INFORMATION
Page 3 and 4: Construction material classificatio
Page 5: Classification of wiring pipes acco
Page 9 and 10: Alphabetical product list with EAN
Page 18 and 19: 18 Changes in a cataloque Changes i
Page 20: KOPOS KOLÍN a.s. Havlíčkova 432

EN - technicke informace 2012:EUM.qxd

Create successful ePaper yourself

Delete template?

Save as template?