Product range sheet pile sections - Minex GEOTEHNIKA

Recommendations

Info

Interlock designs Interlock conforming to DIN EN 10248-2 and E 67 of EAU 2004 Available LARSSEN-Profile 500, 600, 700 and 750 series E D (S-shape) Available LARSSEN 43 (Pay attention to interlock position) Available LARSSEN 430 (Wall form of LARSSEN 43) 16 Dz Dr E LARSSEN sections LARSSEN section D (S-shape) Dz (Z-shape, for wall form 430 only) a t Web (leg) i b i s Back of pile i a i a i a a = outer lock i = inner lock h a Triple piles available on request. LARSSEN section 43, 430 Interlock V 17 Wall axis y y 750 double-pile in S-Form 1416 12 double-pile in Z-Form single-drive quad pile assembly The wall height 750 mm is a non binding dimension. The actual measurement depends mainly upon the installation and ancilliary conditions of the site. Non-standard type Triple piles of the 700 series available on request. 12
Handling holes and cramping/welding of LARSSEN sections Handling holes can be made on request. Each pile back is then provided with a hole as indicated in the drawing. The holes can be placed at a distance of 75 or 300 mm from the upper edge of the pile (to be stated when ordering). The section moduli stated in this manual for LARSSEN sections require the locking of the pile interlocks, either by factory cramping, factory welding or site welding. The middle interlocks of prefabricated double piles are cramped at intervals of approx. 0.4 m, the middle interlocks of prefabricated triple piles are cramped at intervals of approx. 0.8 m. Other intervals can be arranged on request. The shear force absorption of each cramping point is 75 kN at a displace- ment of 5 mm. If for manufacturing reasons fabricated piles such as corner, junction and adapter piles cannot be cramped, they are welded at both ends. 300/75 40 Ø Corner sections Section Omega 17 Weight: 17.3 kg/m Circumference: 40.9 cm Larssen corner piles with inserted corner section 20 Sections of the 500, 600, 700-series. ~ 50 The single hook of corner section 20 is inserted and pressed or welded at both ends. Larssen folded corner piles Sections of the 500, 600, 700-series. 50 Corner D 1102 a 50 Corner E 1201 ~ 50 a Corner E 1101 Corner section 20 Weight: Circumference: W 15.4 kg/m 37.1 cm Corner section 22 Weight: 10.2 kg/m Circumference: 24.7 cm Corner D 1104 LARSSEN sections ~ 50 ~ 55 Corner D 1204 a ~ 35 ~ 50 Corner E 1203 Corner E 1103 ~ 50 ~ 50 ~ 50 a W 17
Page 1 and 2: Product range sheet pile sections S
Page 3 and 4: HSP HOESCH Spundwand und Profil Gmb
Page 5 and 6: Product quality 5
Page 7 and 8: Applications 7
Page 9 and 10: 60.2 - 75.8 85.8 - 101.3 - - 53.4 -
Page 11 and 12: Elastic section 6) modulus Wy 3 cm
Page 13 and 14: 13 E D Dr V = Single pile = Double
Page 15: Elastic section 6) modulus Wy 3 cm
Page 23 and 24: Handling holes and cramping/welding
Page 25 and 26: Handling holes and cramping/welding
Page 27 and 28: Pile section UP 164 UP 166 UP 168 W
Page 29 and 30: Knife-edge bearings on steel sheet
Page 31 and 32: Deviation limits and dimensional to

Product range sheet pile sections - Minex GEOTEHNIKA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?