Download - Keramag AG

1 Washbasin with cover cap white/chrome, 600 x 480 mm, model no. 125460.
Can be combined with half-pedestal, model no. 291410 and vanity units 495 mm.
Also available with Clou waste and overfl ow system.
5 Double washbasin with cover cap white/chrome, 1300 x 480 mm,
model no. 135430. Can be combined with half-pedestal, model no. 291410
and vanity units 1160 mm. Also available with Clou waste and overfl ow system.
Clou
Kerafi x
Ceramics
White (Alpin)
No. 000
2 Washbasin with cover cap white/chrome, 650 x 480 mm, model no. 125465.
Can be combined with half-pedestal, model no. 291410 and vanity units 540 mm.
Also available with Clou waste and overfl ow system.
6 Insert washbasin with cover cap white/chrome, 600 x 400 mm,
model no. 245460. Can be combined with vanity units 1150 mm.
**in combination with shaft valve 521070
The measurements shown here are provisional.
Further information can be obtained from pro.keramag.com
3 Washbasin with cover cap white/chrome, 800 x 480 mm, model no. 125480.
Can be combined with half-pedestal, model no. 291410 and vanity units 680 mm.
Also available with Clou waste and overfl ow system.
7 Hand-rinse basin with cover cap white/chrome, tap hole right or left,
400 x 280 mm.
Model no. 125540 right.
Model no. 125440 left.
x* = 640 mm outlet height with shaft valve 521070
x* = 570 mm outlet height with Clou system
Cut overfl ow height at pos. 12 for Clou system!
4 Washbasin with cover cap white/chrome, 1000 x 480 mm, model no. 125400.
Can be combined with half-pedestal, model no. 291410 and vanity units 880 mm.
Also available with Clou waste and overfl ow system.
Depending on the type of tap used, the overfl ow/outlet behaviour of the basin must
be adjusted individually using the corner valves!
We recommend the use of water-saving perlators!
myDay
36/37