01.03.2013 Views

modular lighting instruments - Crealux

modular lighting instruments - Crealux

modular lighting instruments - Crealux

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Easy install super modupoint / flush dynamix<br />

super modupoint. gypkit. 1. Make a hole of 40mm in the ceiling. 2. Remove the cover of the super modupoint. 3. Connect the cable of the modupoint<br />

to 12V. 4. Push the modupoint with the gypkit in the ceiling. 5. Tighten the screws until the modupoint is fixed into the ceiling. 6. Push the<br />

cover back on the modupoint.<br />

Tel +46 504 (0)8-103070 goodies easy install | Fax +46 (0)8-103060<br />

info@crealux.se | www.crealux.se<br />

12V<br />

flush dynamix. recessed frame. 1. Let’s start! 2. Unscrew the long buttons and remove the pot out of the body. 3. Remove the body out of the frame<br />

by unscrewing the short buttons. 4. Roll over the frame into the ceiling. Tighten the frame with screws. 5. Release the upper cover. 6. Connect the<br />

power supply to the unit and roll over the unit into the ceiling. Tighten the short buttons. 7. Install the FDH lamps, glass, pot and the ARIII lamps into<br />

the unit.<br />

Box 70396 | 10724 STOCKHOLM | SWEDEN<br />

Klarabergsviadukten 70<br />

230V

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!