Air Ultrasonic Ceramic Transducers - Prowave Electronics Corp.

Air Ultrasonic Ceramic Transducers 480EP900
Asymmetric Beam Patterns
Specification
480EP900 Transceiver
Center Frequency 48.0±2.0Khz
Bandwidth (100dB) Transmitter 15.0Khz
(-80dB) Receiver 15.0Khz
Transmitting Sound Pressure 100dB min.
Level
at 48Khz; 0dB re 0.0002µbar per
10Vrms at 30cm
Receiving Sensitivity
-80dB min.
at 48.0Khz; 0dB = 1 volt/µbar
Nominal Impedance (Ohm) 1000
Ringing (ms) 1.2 max.
Capacitance at 1Khz ±20% 2400 pF
Max. Driving Voltage (cont.) 20Vrms
Total Beam Angle -6dB Typical
Long Axis (X)
Short Axis (Y)
43/48/53Khz 22/24/28°
31/51/33°
Operation Temperature -30 to 70°C
Storage Temperature -40 to 80°C
All specification taken typical at 25°C
Closer frequency tolerance, shorter ringing and
wider bandwidth models can be supplied upon
request.
Dimensions: dimensions are in mm
Impedance/Phase Angle vs. Frequency
Impedance (Ohm)
Tested under 1Vrms Oscillation Level
Sensitivity/Sound Pressure Level
Tested under 10Vrms @30cm
Sensitivity (dB)
100000
90
75
60
45
10000
30
15
0
-15
1000
-30
-45
-60
-75
100
-90
40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Frequency (Khz)
-50
-55
-60
-65
-70
-75
-80
-85
-90
90
40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Frequency (Khz)
Beam Angle: @48KHz
Short Axis
Long Axis
130
125
120
115
110
105
100
95
Phase Angle (Degree)
SPL (dB)