Diversey Divermite D10 - ACT Health Supply Services

More documents

Recommendations

Info

CG3 Section 7 - HANDLING AND STORAGE PROCEDURE FOR HANDLING ■ Limit all unnecessary personal contact. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated area. When handling DO NOT eat, drink or smoke. Always wash hands with soap and water after handling. Avoid physical damage to containers. Use good occupational work practice. Observe manufacturer's storing and handling recommendations. SUITABLE CONTAINER ■ Polyethylene or polypropylene container. Packing as recommended by manufacturer. Check all containers are clearly labelled and free from leaks. STORAGE INCOMPATIBILITY ■ Segregate from acids. STORAGE REQUIREMENTS ■ Store in original containers. Keep containers securely sealed. Store in a cool, dry, well-ventilated area. Store away from incompatible materials and foodstuff containers. Protect containers against physical damage and check regularly for leaks. Observe manufacturer's storing and handling recommendations. SAFE STORAGE WITH OTHER CLASSIFIED CHEMICALS + + + + X + X: Must not be stored together O: May be stored together with specific preventions +: May be stored together EXPOSURE CONTROLS Source Material Diversey Divermite D10 Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION TWA ppm TWA mg/m³ STEL ppm Australia Exposure monoethanolamine 3 7.5 6 15 Standards (Ethanolamine) The following materials had no OELs on our records • water: CAS:7732-18-5 STEL mg/m³ Peak ppm Peak mg/m³ EMERGENCY EXPOSURE LIMITS Material Revised IDLH Value (mg/m³) Revised IDLH Value (ppm) monoethanolamine 3 30 Hazard Alert Code: HIGH Chemwatch Material Safety Data Sheet (REVIEW) Version No: 2.0 Chemwatch 4537-95 Issue Date: 29-Jan-2010 CD 2011/1 NC317TCP MATERIAL DATA DIVERSEY DIVERMITE D10: ■ None assigned. Refer to individual constituents. MONOETHANOLAMINE: ■ for monoethanolamine: Odour threshold: 3-4 ppm. Continuous exposure at 5 ppm produced only slight systemic effects. Intermittent exposure produces a lesser degree of toxicity in laboratory animals. This decreased toxicity is related to the rate of elimination; the longer retained, the greater the toxicity,. The TLV-TWA is thought to be protective against the risk of irritation and neuropathic effects. Odour Safety Factor (OSF) OSF=0.77 (ETHANOL AMINE). WATER: http://jr.chemwatch.net/chemgold3/msds.exe?mode=SAP&cwno=4537-95&msdsfor... Page 4 of 10 TWA F/CC Notes 24/06/2011
CG3 ■ No exposure limits set by NOHSC or ACGIH. PERSONAL PROTECTION EYE ■ Safety glasses with side shields; or as required, Chemical goggles. Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document, describing the wearing of lens or restrictions on use, should be created for each workplace or task. This should include a review of lens absorption and adsorption for the class of chemicals in use and an account of injury experience. Medical and first-aid personnel should be trained in their removal and suitable equipment should be readily available. In the event of chemical exposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Lens should be removed at the first signs of eye redness or irritation - lens should be removed in a clean environment only after workers have washed hands thoroughly. [CDC NIOSH Current Intelligence Bulletin 59] HANDS/FEET ■ Wear chemical protective gloves, eg. PVC. Wear safety footwear. OTHER ■ Overalls. Barrier cream Eyewash unit. GLOVE SELECTION INDEX ■ Glove selection is based on a modified presentation of the: "Forsberg Clothing Performance Index". The effect(s) of the following substance(s) are taken into account in the computer-generated selection: monoethanolamine ■ Protective Material CPI *. BUTYL A BUTYL/NEOPRENE A HYPALON A NEOPRENE A NEOPRENE/NATURAL A VITON A NATURAL+NEOPRENE A NITRILE A PVA A NATURAL RUBBER B PVC B NITRILE+PVC B ■ * CPI - Chemwatch Performance Index A: Best Selection Diversey Divermite D10 B: Satisfactory; may degrade after 4 hours continuous immersion C: Poor to Dangerous Choice for other than short term immersion Hazard Alert Code: HIGH Chemwatch Material Safety Data Sheet (REVIEW) Version No: 2.0 Chemwatch 4537-95 Issue Date: 29-Jan-2010 CD 2011/1 NC317TCP NOTE: As a series of factors will influence the actual performance of the glove, a final selection must be based on detailed observation. - Page 5 of 10 * Where the glove is to be used on a short term, casual or infrequent basis, factors such as "feel" or convenience (e.g. disposability), may dictate a choice of gloves which might otherwise be unsuitable following long-term or frequent use. A qualified practitioner should be consulted. RESPIRATOR ■ Selection of the Class and Type of respirator will depend upon the level of breathing zone contaminant and the chemical nature of the contaminant. Protection Factors (defined as the ratio of contaminant outside and inside the mask) may also be important. Breathing Zone Level ppm Maximum Protection Factor Half-face Respirator Full-Face Respirator (volume) http://jr.chemwatch.net/chemgold3/msds.exe?mode=SAP&cwno=4537-95&msdsfor... 24/06/2011
Page 1 and 2: CG3 PRODUCT NAME Diversey Divermite
Page 3: CG3 Section 5 - FIRE FIGHTING MEASU
Page 7 and 8: CG3 (kPa) available Limit (%) Speci
Page 9 and 10: CG3 invertebrates, although amphibi

Diversey Divermite D10 - ACT Health Supply Services

Create successful ePaper yourself

Delete template?

Save as template?