Trade of Electrician Motor Control COURSE NOTES - eCollege
Trade of Electrician Motor Control COURSE NOTES - eCollege
Trade of Electrician Motor Control COURSE NOTES - eCollege
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
FAS Electrical Course Notes – Module 2.4.2<br />
Assembly Instruction<br />
Figure 15 shows one type <strong>of</strong> flexible conduit and gland.<br />
Figure 15<br />
1. Cut the conduit square with a knife edge blade rather than a hacksaw.<br />
2. Dismantle the gland body.<br />
Gland Claw Seal Compression<br />
Nut<br />
3. Fix the gland body in the enclosure entry.<br />
4. Assemble the compression nut and claw seal loosely on the conduit end<br />
( correct way round ).<br />
5. Push the conduit down into the gland body.<br />
6. Assemble the compression nut onto the body thread while continuing to apply a force<br />
on the conduit.<br />
7. Tighten the compression nut until finger tight.<br />
8. Using a spanner tighten the compression nut two further turns to provide a dust and<br />
water tight seal between the conduit and gland.<br />
15<br />
Flexible<br />
Conduit<br />
Revision 4. Feb 2009