Brochure: BROCH. ATTIX 965-OH/MSDXC - GL - Nilfisk-ALTO

The new ATTIX 965-0H/M SD XC is the most
powerfull two-motor machine that is approved
to be used for both H and M-Class.
Featuring XtremeClean automatic filter cleaning
and a corrorion-proof Stainless Steel Sit Down
container that ensures durability and long life.
By choosing the correct container inlet, the
machine allows you to dispose of the debris with
a dustfree and therefore safe solution.
The container is equiped with two inlets and
two safety plugs:
• By use for M-Class dust, use the open disposal
bag and the upper fitting.
• When vacuuming H-Class dust, use the lower
inlet in combination with the safety filter bag
and close the upper inlet.
The SitDown model is designed for mainly
dry pick-up, but the machine features Bypass
turbines that makes it possible also to vacuum
wet debris. Wet debris will not damage the
machine, but there is a risk of overfilling the
container!
Applications:
• Wood working - hard wood
• Plastics industry
• Metal workshops
• Pharmaceutical Industries
• Food and beverage
Dealer:
ATTIX 965-0H/M SD XC
– The perfect industrial disposal concept for hazardous and
carciogenic dusts.
Technical data:
Air flow rate l/min.
Vacuum mbar/KPa
Power PmAx W
Power PIEC W
Working sound level dBA
Container volume l
mains connection V/~/HZ
Dimensions LxWxH mm
Weight kg
El cable m
Standard Accessories:
Filter bag
Filter element, H-class
Disposal bag for filter element
Item no.
ATTIX 965-0H/M
SD XC
2 x 3600
230/23
2 x 1500
2 x 1200
67
50
230/1/50-60
615x690x990
45
10
302003473
302001134
302001480
302002903
No claims can be made on the basis of information or illustrations contained in this leaflet. Subject to alteration of technical data, design and equipment.
Nilfisk-ALTO
Division of Nilfisk-Advance A/S
www.nilfisk-alto.com
The new improved XtremeClean fully automatic filter
cleaning system on ATTIX 965-0H/M SD XC is based
on a servo motor controlled Y-FLAP, where the filter
has the full surface available all the time during
operation. This ensures an even longer lifetime, high
efficiency and prevents power loss through restricted
airflow - without interruptions.
High level of filter filtration due to:
• Servo motor controlled Y-FLAP
• Total filter surface in use during
operation
• Automatic continuous filter cleaning
• Secures maximum performance
• Perfect control on cleaning cycles
Automatic Filter Cleaning System
Art. No. 901.007.352. 06.08 © by Nilfisk-ALTO. Djurs Gruppen Grafisk Support · Tlf. 86 48 36 33