the full Hormann Operator brochure - ABI Garage Doors
the full Hormann Operator brochure - ABI Garage Doors
the full Hormann Operator brochure - ABI Garage Doors
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Hinged gate operator DTU 250<br />
Technical data, fitting data<br />
Foundation dimensions<br />
Approx. 315 x 420 x 200<br />
Mains connecting lead<br />
230 V, NYY 3 x 1.5² (on-site)<br />
Motor cable<br />
230 V, NYY 5 x 1.5² (on-site)<br />
Electric lock connecting lead<br />
NYY 3 x 1.5² underground<br />
H07RN-F 2 x 1² on <strong>the</strong> door leaf<br />
Additional connection cable<br />
All cables underground NYY, z.B. 5 x 1.5²<br />
Lay all cables separately!<br />
40<br />
~420<br />
Min.<br />
156<br />
Min.<br />
200<br />
~315<br />
156<br />
Drainage<br />
Note: In order to comply with <strong>the</strong> requirements<br />
in DIN EN 13241, we recommend using a closing<br />
edge safety device.<br />
All dimensions in mm.<br />
65<br />
±0<br />
58<br />
Mains voltage<br />
230 V<br />
Control<br />
External<br />
Operating mode<br />
S2, short-time duty 4 minutes<br />
Max. pull force/peak force<br />
2500/3000 N<br />
Travel limit<br />
Door open stop required<br />
Door closed stop required<br />
Optional: integral stops<br />
Automatic safety cut-out<br />
Obstruction recognition<br />
Door travel speed<br />
Approx. 15 seconds<br />
At a 90° opening angle<br />
Automatic timed closing<br />
Adjustable by up to 4 minutes<br />
Door locking<br />
12 V electric lock<br />
Motor<br />
230 V AC motor with self-locking gear<br />
<strong>Operator</strong> housing<br />
Supporting steel pan with stainless steel motor<br />
Motor IP 67<br />
Temperature range<br />
-20° to +60°C<br />
Radio remote control<br />
Optional<br />
Technical clarification is required<br />
for <strong>the</strong> hinged gate operator DTU 250.
Change language