multimedia, connectors & accessories also inside... - CPC
multimedia, connectors & accessories also inside... - CPC
multimedia, connectors & accessories also inside... - CPC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>multimedia</strong><br />
Voltage Test<br />
Screwdriver<br />
An all-weather voltage test screwdriver for voltage,<br />
polarity, continuity testing, bulb/fuse testing and<br />
microwave leakage detection. Features an integral<br />
LED indication and contact/non contact inductive<br />
testing.<br />
Technical Data<br />
AC Voltage Test<br />
Contact 70 to 250V SC<br />
Non-Contact 700 to 600V AC<br />
DC Voltage Test Up to 250V<br />
Polarity Test 1.5V to 36V DC<br />
Continuity Check 0 to 50MΩ<br />
Microwave Leakage Detection<br />
99p<br />
≥5mW/cm<br />
order code IN0171601<br />
2<br />
465115<br />
Tone and Probe<br />
Kit<br />
Identify or trace wires or cables<br />
within a group without having to<br />
damage the insulation. Identify<br />
faults and states of telephony<br />
systems.<br />
• Check continuity of cables and<br />
wires<br />
• Track cables and wires and locate<br />
break points<br />
• Identify the state of working<br />
telephone lines (clear, ring, busy)<br />
• Send a single solid tone or dual<br />
alternating tone down a wire<br />
Technical Data<br />
Transmitter Specifications<br />
Tone Frequency 1.5kHz<br />
Power 9V PP3 Battery<br />
Dimensions (WxHxD) 35x145x25mm<br />
Weight 114g<br />
Receiver Specifications<br />
Frequency Range 100Hz - 300kHz<br />
Power 9V PP3 Battery<br />
Dimensions (WxHxD) 43x238x26mm<br />
Weight<br />
£11.50<br />
106g<br />
order code IN0526601<br />
510017<br />
ATX Power<br />
Supply Tester<br />
Model: 72-1082<br />
Obtain quick verification of proper operation of ATX<br />
style computer power supplies. Simply connect the<br />
Tenma computer power supply tester to the ATX<br />
supply's 20 pin connector, and slide the testers<br />
rocker switch to the ON position. The tester applies<br />
the proper current load and simulates the ON<br />
command from the motherboard, and provides LED<br />
verification of proper operation.<br />
• Rugged metal housing<br />
• 150mm Lead between connector and tester<br />
housing<br />
• Convenient test points for +3.3V, +12.0V, - 5.0V<br />
and + 5.0V measurement<br />
• On/off rocker switch with LED<br />
• Complete instructions included<br />
• Dimensions (WxHxD): 35x18x95mm<br />
£5.65<br />
order code IN0518201<br />
507393<br />
LAN Tester & DMM<br />
A practical multimeter that is <strong>also</strong> capable of testing<br />
network cables. It can easily check the pin configuration<br />
and <strong>also</strong> detect cable faults such as open-circuits,<br />
short-circuits and cross-overs on the following cable types:<br />
• 10 Base-T Cat 5 Cable • Coax<br />
• RJ45/RJ11 Modular Cable • 356A Cable<br />
• TIA-568A/B Token Ring Cable<br />
Technical Data<br />
Max. Range Accuracy<br />
AC Voltage 600V ±1.0%<br />
DC Voltage 600V ±0.5%<br />
AC Current 200mA ±1.8%<br />
DC Current 200mA ±1.5%<br />
Resistance 20MΩ ±0.8%<br />
Handheld PAT<br />
Tester<br />
Model: Primetest 100<br />
An ideal choice for those<br />
looking for an easy to use,<br />
comprehensive unit.<br />
Simply pushing a button<br />
will give you the option<br />
of PAT Test mode, Class<br />
I and II, IEC Lead test<br />
mode or Power Socket<br />
mode. To further add<br />
to its easy<br />
operation, a bright<br />
display shows the<br />
test results<br />
values as well<br />
as a PASS or<br />
FAIL indication.<br />
• Compact, rugged<br />
enclosure<br />
• Simple push button test action<br />
• Test Class I and II equipment including IT and<br />
business equipment<br />
• Differential Leakage test<br />
• Extension and IEC lead tests<br />
• Power socket polarity<br />
• LCD display giving clear pass/fail indication<br />
• Supplied with test lead, IEC lead, instruction<br />
manual and deluxe carry case with shoulder strap<br />
£269<br />
order code IN0499401<br />
481817<br />
Wi-Spy USB Spectrum<br />
Analyser<br />
Wi-Spy is the world's smallest 2.4 GHz spectrum<br />
analyzer. Wi-Spy is perfect for troubleshooting<br />
interference with WiFi systems caused by the<br />
following devices:<br />
• Wireless audio video devices • Microwave Ovens<br />
• Cordless Phones • Zigbee • Bluetooth<br />
System Requirements:<br />
• Windows 2000, XP, or Vista with Net.2.0<br />
• USB1.1 or 2.0<br />
• 1024x768 (or greater) screen resolution<br />
• MAC or Linux<br />
Supplied with USB spectrum analyser and software<br />
cd.<br />
£59.95<br />
order code IN0545601<br />
520486<br />
Digital<br />
Multimeter<br />
A basic, low cost<br />
multimeter supplied<br />
test leads, rubber<br />
holster and battery.<br />
•3¹⁄₂ Digit display with auto<br />
polarity<br />
• AC/DC Voltage measurement<br />
• DC Current<br />
• Resistance measurement<br />
• Diode and Transistor test<br />
• Audible continuity tester<br />
• Data hold<br />
• Low battery indication<br />
£4.50<br />
order code IN0487601<br />
£19.95<br />
order code IN0487001<br />
451084<br />
451043<br />
Voltage Detector - With<br />
Flashlight<br />
• Non-contact detection of AC voltage from 100V<br />
AC to 600V AC<br />
• Rugged, double moulded case<br />
• CAT III 1000V<br />
• Suitable for outlets or against wire insulation<br />
testing<br />
• Flashing red LED light indicator<br />
• Build-in bright flashlight with ON/OFF button<br />
• Outer surfaces are non-conductive<br />
• For use on 50/60Hz circuits<br />
£4.50<br />
order code IN0444901<br />
462543<br />
Mains Tester<br />
Plug<br />
Suitable for testing the<br />
wiring correctness of a<br />
standard 13A trailing<br />
socket.<br />
Technical Data<br />
Rated voltage 200-250V<br />
Rated frequency 50Hz<br />
Power consumption Approx. 1.45W at 220V<br />
Compliances<br />
£1.69<br />
BS EN 61010-1:1993<br />
order code PL1005201<br />
481079<br />
LAN Qualification<br />
Tester<br />
Supported Tests:<br />
• Wiremap<br />
• Cable length<br />
• Cable signal performance<br />
• Digital toner<br />
• Ethernet port detection and<br />
identification<br />
• Analogue<br />
telephone<br />
detection<br />
• Blink port light<br />
• Continuity<br />
• Speaker test<br />
• Cable fault<br />
finding<br />
• Video signal<br />
detection<br />
CableIQ is the first<br />
qualification tool<br />
designed for<br />
network technicians<br />
who need to<br />
troubleshoot<br />
connectivity<br />
problems and qualify<br />
cabling bandwidth. It<br />
gives network techs<br />
the vision to see<br />
whether an existing<br />
cabling link is qualified to support 10/100, VoIP or<br />
Gigabit Ethernet, quickly isolate cabling from<br />
network problems and discover what is at the far<br />
end of any cable. It detects speed and duplex<br />
settings of attached switches and PCs. Intelligent<br />
wiremap graphically shows distance to faults (e.g.,<br />
pin 1 break at 11m). Lightweight, rugged, reliable<br />
unit tests all copper cabling. Its ease and power can<br />
help you close trouble tickets faster and ensure<br />
smooth upgrades to higher network speeds.<br />
Cable IQ Tester includes:<br />
CableIQ Tester with remote adaptor, soft carrying<br />
case and four AA batteries.<br />
Cable IQ Tester Kit includes:<br />
CableIQ with remote adaptor, IntelliTone 200 Probe,<br />
six remote office IDs, rugged carrying case and four<br />
AA batteries.<br />
Accessories:<br />
• Remote IDs 2-4: identify up to 3 remote office<br />
outlets<br />
• Remote IDs 5-7: identify an additional 3 office<br />
outlets<br />
• Intellitone 100 Probe: intelligent network probe<br />
• Intellitone 200 Probe: intelligent network probe<br />
with ethernet connectivity and HUB/NIC<br />
indication<br />
IN0476901 CableIQ Tester £699.00<br />
IN0477001 CableIQ Tester Kit £999.00<br />
IN0477301 Coax Adaptor Kit £13.72<br />
IN0477401 Speaker Wire Adaptor Kit £39.00<br />
IN0477501 RJ45 Adaptor Kit £32.17<br />
IN0477601 Hard Carry Case £49.95<br />
IN0474401 Intellitone 100 Probe £54.00<br />
All Prices Exclude VAT<br />
62 GO ONLINE FOR OUR LATEST PRICES <strong>CPC</strong>.CO.UK<br />
451061<br />
Remote Cable<br />
Sniffer<br />
A network cable<br />
tester for<br />
USOC4/6/8,<br />
Ethernet 10-<br />
BaseT/10Base2,<br />
EIA/TIA-568A/B,<br />
A&T 258A, Token<br />
ring, telephone, AppleTalk,<br />
PhoneNet cabling systems. Ideal<br />
for testing cable before and after<br />
installation. Supplied with carry case.<br />
• Open/Short wiring test<br />
• Connected wires displayed<br />
• No connection/termination display<br />
• Non-parallel display<br />
• One step operation<br />
• Automatic deactivation<br />
• Separable module design for testing two remote<br />
points<br />
• Ethernet 10Base2 terminator value detection<br />
• RJ45, RJ11, BNC and 3-pin Mini DIN connections<br />
• LED indicators<br />
• Powered by 1x 9V PP3 battery - not supplied.<br />
£19.95<br />
order code IN0046001<br />
502433<br />
USB Data Logger<br />
Measures and stores relative humidity and<br />
temperature readings. Offers LED status indication,<br />
user settable logging rate, start-time and alarms.<br />
Downloads are stored via a PCs USB port, software<br />
requires Win 98/2000 or XP and <strong>also</strong> allows<br />
humidity, temp and dewpoint data to be graphed<br />
and printed.<br />
• 16,000 RH readings<br />
• 16,000 Temperature readings<br />
• 4 User-programmable alarms<br />
• Status indicated by flashing red and green LED<br />
Humidity measuring range 0 to 100% RH<br />
Resolution 0.5% RH<br />
Accuracy ±3.5% RH<br />
Temperature measuring range -35 to +80<br />
Resolution 0.5% RH<br />
Accuracy ±2°C<br />
Logging rate<br />
£43.95<br />
10 sec to 12 hours<br />
order code IN0438601<br />
481726<br />
LAN Tester<br />
A two piece LAN<br />
tester with<br />
10/100/1000MB/s<br />
speed and duplex<br />
display.<br />
• Speed<br />
measured 10,<br />
100 or<br />
1000MB/s<br />
• Duplex full<br />
or half<br />
indicated by<br />
LED<br />
• Tests single<br />
sided or<br />
inline device<br />
• Verifies<br />
whether device<br />
appears as a<br />
hub (switch) or<br />
PC and whether pulses<br />
are data or link<br />
• Tone gererator/probe to trace cable pairs through<br />
complex wiring systems<br />
• Single sided cable pair testing - Verify what pairs<br />
are terminated in the hub, switch or PC<br />
• Two sided cable pair testing - Display what pairs<br />
are wired; whether cable is straight through or<br />
crossover; and whether cable has pair reversals<br />
The unit answers the 12 most common questions<br />
that occur:<br />
• Is my hub/switch or PC ON and transmitting?<br />
• Do I require a straight thru or crossover patch<br />
cable?<br />
• Is my LAN speed 10, 100 or 1000MB/s and is it<br />
half or full duplex?<br />
• Is the hub/switch and PC link negotiating a<br />
slower speed and duplex than expected?<br />
• Do my hub or PC appear as a hub or PC?<br />
• Is a hub or PC connected to my cable?<br />
• Does my hub or PC require 2 or 4 pair cables?<br />
• What pairs are terminated in my cable?<br />
• Where is my cable in the wiring closet?<br />
• What hub port is my PC using?<br />
• Is my cabling straight through or crossover?<br />
• Does my cable have inverted pair or other faults?<br />
£155<br />
order code IN0464001<br />
448077