1. Plastic spacers - Nevoga

16
1. Plastic spacers
Distanz Schalungsspannstelle
Distanz-cone
Distanz-plug
Test certificate
on request
Insolation-ring
The DISTANZ formwork tie rod system was developed from the OKTAGON and has a smaller support
disc. Made of HDPE (free of PVC). DISTANZ is resistant to acids and liquor, which are common
on building.
Item
Wall thickness
Pcs /
Pcs /
No.
mm
Bag
Pallet
*OD15 150 100 2.400
*OD18 180 100 2.400
*OD20 200 100 2.400
OD22/3T 220 100 2.400
*OD24 240 100 2.400
*OD25 250 100 2.400
*OD30 300 100 2.400
*OD35 350 100 1.500
OD36/3T 360 100 1.500
*OD365 365 100 1.500
*OD40 400 100 1.500
OD45/3T 450 50 800
OD50/3T 500 50 800
OD55/3T 550 50 800
OD60/3T 600 50 800
* made of one piece (free of PVC)
Delivery in a set: each DISTANZ comes with two plugs
Custom lengths can be made to order; cone is placed over the cut tube.
Innter tube guaranteed waterproof.
*free of PVC
Item
For tube Ø
Pcs /
Pcs /
No.
mm
Bag
Pallet
ODK 22/26 200 5.000
Cone for creating waterproof formwork tie rod systems. Custom lengths can be obtained with normal
DISTANZ properties by cutting down 22/26mm plastic tubing to a length 8cm below the required
wall thickness and pressing the cones into it.
Item
For tube Ø
Pcs /
Pcs /
No.
mm
Bag
Pallet
ODS 22/26 200 25.000
End plug for watertight sealing of DISTANZ cones.
May only be hammered into place - adhesive must not be used! Long plugs result in a quick and
simple working method. The solid construction of the plug increase the reliability of the system.
Item
Ø
Pcs /
Pcs /
No.
mm
Box
Pallet
ODDI 80 50 -
For absorbing pressure when using insulation materials (right in the formwork).