Q - Jetsolutions SA

DoverPac ® - Contained Powder Transfer
FLEXIBLE FLEXIBLE C ONTA C ONTA INMENT INMENT TECHNOLOGIES
Basic Basic Process Process Flow Flow of of
a Contained, a Contained, Flexible Flexible
Charging Charging System System
Lift over Lift vessel over vessel
Attach Attach liner then liner bag then out bag stub out stub
Empty Empty
Crimp Crimp
2 ILC 2 Dover ILC Dover www.doverpac.com customer_service@ilcdover.com Ph 1.302.335.3911 Ph 1.302.335.3911 • Fax 1.302.335.1320
• Fax 1.302.335.1320
22
Materials Materials
ArmorFlex ® is ILC Dover's proprietary family of films used exclusively in
the DoverPac ® ArmorFlex
family of high potency flexible containment products.
Details are available in a databook upon request.
® is ILC Dover's proprietary family of films used exclusively in
the DoverPac ® family of high potency flexible containment products.
Details are available in a databook upon request.
Charging Charging Canister Canister and and Transition Transition Adapter Adapter
The canister pictured at the right shows the set
up on a straight transition adapter at ILC’s test
facility. While canisters typically are 316L stainless
steel, Hastelloy ® The canister pictured at the right shows the set
up on a straight transition adapter at ILC’s test
facility. While canisters typically are 316L stainless
steel, Hastelloy canisters also are available.
This unit has an initial groove for the canister
end cap, additional grooves for liner attachment
(typically 5 or 10 grooves depending on process Canister Attached to ILC Dover
requirements and available height), and
Test Rig
1 groove for the cleaning sleeve or clean-inplace
(CIP) sleeve attachment.
® canisters also are available.
This unit has an initial groove for the canister
end cap, additional grooves for liner attachment
(typically 5 or 10 grooves depending on process Canister Attached to ILC Dover
requirements and available height), and
Test Rig
1 groove for the cleaning sleeve or clean-inplace
(CIP) sleeve attachment.
The canister The canister is supplied is supplied with with a 12” a sanitary 12” sanitary flange flange on each on each end. end. This This
allows allows for a for common a common design design for attachment for attachment to vessel to vessel specific specific transition transition
adapters adapters and our and CIP our tundish. CIP tundish.
The custom The custom transition transition adapter adapter is fitted is fitted with with a flange a flange on one on end one that end that
interfaces interfaces with with the vessel the vessel flange flange (or valve (or valve that is that in-line is in-line on the on vessel the vessel
flange). flange). The opposite The opposite end is end a 12” is a sanitary 12” sanitary flange flange that interfaces that interfaces with with the the
canister. canister. For flanges For flanges smaller smaller than than 12", a 12", conical a conical transition transition adapter adapter is used is used
to allow to allow powder powder flow flow directly directly into the into vessel the vessel without without accumulation on on
the hardware. the hardware. The adapter The adapter also also is fitted is fitted with with a vacuum a vacuum flange flange port port with with
a 1/2” a sanitary 1/2” sanitary flange flange for attachment for attachment to the to vacuum the vacuum and nitrogen and nitrogen sources sources
to allow to allow inert inert processing.
Purge/Vacuum Arrangement
Note: Note: Common Common vacuum/purge supply supply connection connection
to HEPA to HEPA filter provides filter provides backwash backwash function function to to
extend extend filter life. filter life.
ONE ONE MOONWALKER RD., RD., FREDERICA, DELAWARE DELAWARE USA USA 19946-2080 19946-2080
Containment
Systems