Sawmill Short Course Log Inputs – Measurement & Conversion ...

Recommendations

Info

Sub-Neiloid Sub Neiloid Rule Used where logs to be scaled have a shape that more closely approaches the frustrum of a neiloid Cubic foot volume = 0.005454L x [D(SE) + D(LE] 2 This rule has been used on a more limited basis 2
Is there a best system? <strong>–</strong> The case for using cubic volume Change in length/change in volume criteria Ability to account for secondary products Limiting variations in predicted lumber outputs
Page 1 and 2: Sawmill Short Course Log Inputs - M
Page 3 and 4: Common Log Measurements Board Foot
Page 5 and 6: Cubic Foot of Wood Defined as a so
Page 7 and 8: Linear Foot of Wood A wood member
Page 9 and 10: Board foot log rules Cubic foot sc
Page 11 and 12: Log Scaling Assumptions The log is
Page 13 and 14: Merchantability Guidelines Guidelin
Page 15 and 16: Defect Classifications (Region 2) 1
Page 17 and 18: Squared Defect Method Defective ar
Page 19 and 20: Length Deduction Method Used when
Page 21 and 22: Bucking Logs for Scale (Value) Buck
Page 23 and 24: Cubic Foot Measure Cubic foot rule
Page 25: Two-end Two end Conic Rule The log
Page 29 and 30: Benefits of Weight Scaling Reduced
Page 31 and 32: Weight Scale Factors Can use stand
Page 33 and 34: Estimating the Number of Sample Tru
Page 35 and 36: Conversion Factors for Log/Lumber M
Page 37 and 38: Conversion Factors for Log/Lumber M
Page 39 and 40: Log Grading Definition: Classifying
Page 41 and 42: Log Grades (Example)
Page 43 and 44: Grading strategies for small mills

Sawmill Short Course Log Inputs – Measurement & Conversion ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?