Price List - Barrett

P# Description H
BORS®: ON BOARD BALLISTIC COMPUTER
UPC Code Retail
BORS (Barrett Optical Ranging System) is an integrated ballistics computer that mounts directly on the riflescope and couples to the elevation knob.
Drawing from several tables and taking into account a number of real-time external factors, it automatically gives the shooter the exact yardage
at which a bullet will hit. Once the distance to the target has been estimated, the computer can be put into action by simply turning the elevation
knob until the LCD displays the target’s range. Three internal sensors automatically calculate the ballistic solution. BORS compensates for temperature,
change in barometric pressure and aiming at an upward or downward angle. BORS even determines if the rifle is canted. BORS kit includes the
proprietary Barrett Ballistic Software (requires Windows XP or higher, and is not directly MAC OS compatible) that’s pre-programmed with a library selected
by Barrett. It also includes a BORS data cable that allows the user to program custom loads on a personal computer and transfer them directly to BORS.
For Nightforce NON High Speed Turrets (Barrett Rings Required)
66981 3.5-15x50mm P 816715011237 $ 1,399
66979 5.5-22x50mm & 56mm P 816715010414 $ 1,399
66971 8-32x56mm P 816715010421 $ 1,399
For Schmidt Bender (Barrett Rings Required)
66972 3-12x50mm PM II, 0.1 MRAD adjust. P 816715011213 $ 1,750
66970 5-25x56mm PM II, 0.1 MRAD adjust. P 816715011220 $ 1,750
For or With Leupold®
13353 For Mark 4 M1 Scopes (Barrett Rings Required) P 816715010087 $ 1,399
13354 BORS with Leupold Mark 4.5-14x50mm Scope, includes Barrett Ultra High Rings P 816715010070 $ 2,769
SCOPE RINGS & OPTICS ACCESSORIES
ZERO-GAP® Rings
The unique scope clamping design of Barrett ZERO-GAP Rings takes care of some old optics mounting challenges. In the past, great attention was required
when securing scope ring caps to maintain an equal gap between the lower ring and top cap on each side. There was also the possibility of rotating the
scope out of perfect vertical reticle alignment while torquing the cap screws in a side-to-side pattern. These problems are eliminated with the ZERO-GAP
design. Simply secure the cap on the indicated side until there is no gap between lower ring and cap, check for perfect reticle alignment, and then torque
the remaining side to the required specification. Zero-Gap rings are available in four heights to fit any rifle/optic configuration.
13321 30mm, Low (1.0") P 816715010100 $ 200
13322 30mm, Medium (1.1") P 816715010117 $ 200
13323 30mm, High (1.3") P 816715010124 $ 200
13324 30mm, Ultra High (1.4") P 816715010131 $ 200
66868 34mm, Medium (1.1") P 816715010452 $ 200
66869 34mm, Ultra High (1.4") P 816715010940 $ 200
ExRings®
ExRings with Pin-Lock and ZERO-GAP technology have a dual setting MOA taper at 15 or 40 MOA, utilizing the riflescope’s precise internal elevation
adjustment by aligning the scope for long-range shooting. The front ring assembly is designed with a precision fit pivot that allows the scope to elevate in
the rear, but tolerances ensure no unwanted movement. The rear ring assembly houses the Barrett Pin-Lock technology that allows the user to select from
two MOA settings. Once an MOA setting is selected and the ring’s four cross bolts are torqued to specification, Barrett ExRings become a rock-solid mount
with the correct taper to maximize the potential of your rifle system.
13319 30mm 15/40 MOA (1.6" Dual MOA Setting) P 816715010094 $ 230
13320 30mm 20/30 MOA (1.6" Dual MOA Setting) P 816715010445 $ 230
66870 34mm 20/30 MOA (1.7" Dual MOA Setting) P 816715010438 $ 260
Ring Packages
12988 30mm Ring Package: Includes all 30mm Ring Sets & Accessory Ring Cap P 816715011848 N/A
12989 34mm Ring Package: Includes all 34mm Ring Sets P 816715011855 N/A
Optics Accessories
66821 30mm Accessory Ring Cap P 816715010650 $ 80
13325 1" Scope Ring Adapters P 816715010162 $ 40
7