Download Sail Hardware version 5 here - Rutgerson
Download Sail Hardware version 5 here - Rutgerson
Download Sail Hardware version 5 here - Rutgerson
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Part no Product description<br />
Leech Line Cleats<br />
48<br />
RUTGERSON E-Cleats<br />
<strong>Rutgerson</strong> Leech line cleat is a cost efficient and durable solution to leech line handling.<br />
RUTGERSON Tape folder<br />
The <strong>Rutgerson</strong> Tape Folder greatly increases efficiency for the time consuming operation of creasing tapes.<br />
1. Loosen the two wing nuts. Push the two stainless plates and upwards.<br />
2. Fold/crease half a metre of the tape precisely in the middle.<br />
3. Insert the folded/creased tape into one of the slots. Use the narrow slot for tapes<br />
lighter than 280gr/sqm, and the wider slot for tapes heavier than 280gr/sqm. The<br />
fold should point towards the stainless plate.<br />
4. Push the stainless plate down against the folded tape. Tighten the wing nuts again.<br />
5. Pull the tape straight through the tape folder.<br />
Part no Product description Packed per<br />
1650 <strong>Rutgerson</strong> Tape Folder Set<br />
RONDO Chafe protector<br />
Rondo is a clip on system that prevent sails and running tackle from chafing against standing rigging. The Rondo is pre-drilled to fit Ø 6mm<br />
wire but can be drilled to fit wires up to Ø11mm, and is ideally suited for wire, shrouds etc.<br />
Part no Product description<br />
RONDO Chafe Protector<br />
Line<br />
Ø<br />
[mm]<br />
Min wire<br />
Ø [mm]<br />
Length<br />
[mm]<br />
Max wire<br />
Ø [mm]<br />
Packed<br />
per<br />
1800 RONDO Chafe Protector 6 11 30 Pair<br />
Width<br />
[mm] Material<br />
www.rutgerson.se<br />
Packed<br />
per<br />
2215-01 Leech line cleat, E-cleat No1 2-3 70 21 Nylon 100<br />
2215-02 Leech line cleat, E-cleat No2 3-6 70 30 Nylon 100
Change language