Show the earth who's boss - Mack Trucks Australia

Why certify your products?
mackboots.COM
PH:1300 350 216
Disclaimer: Every reasonable effort has been made to ensure the accuracy of
the product images, model numbers, descriptions and specifications that appear
in this brochure. This brochure must not be regarded as an infallible guide.
Mack Boots tm accepts no responsibility in this regard. As product details may
change from time to time please contact Mack Boots tm to gain the latest
information.
MACK, Mack and the Bulldog design oval logo, Bulldog design, Built Like A Mack
Truck and Bulldog Tough are registered trademarks of Mack Trucks, Inc.
All rights reserved.
E:sales@mackboots.com
To ensure that Mack Boots TM are consistently of the highest quality
standards, the Mack Boots TM range have undergone independent
testing to achieve BSi Benchmark Product Certification.
Product certification is a process that confirms a product meets the necessary local, national or international quality
standards relevant to a particular product.
Product certification involves an independent, qualified third party assessing a manufacturer’s capability to constantly
manufacture a product to a recognised standard, such as an Australian Standard.
The product certification process involves both assessing the manufacturer’s production systems and facilities and selecting
representative samples of finished product for testing by independent suitably accredited testing facilities.
Once certified, the manufacturer will be able to display the assessing body’s certification trade mark on the products
produced, offering objective verification of its compliance. To retain its “certified” status, the certification process requires
regular auditing of the manufacturer’s facilities and ongoing batch testing of products to ensure that the systems continue
to be effective.
The Mack Boots tm range is marked with BSI’s Benchmark Product Certification Mark. This indicates that the conformity of
our product is based upon technical documentation and an annual review of our manufacturing and quality control process
to monitor our ability to consistently produce products in compliance with AS/NZS2210 (AUS/NZ), EN–ISO 20345 (EUR) and
astm F2413–11 (USA) standards.
This Product Certification Mark is accredited by the Joint Accreditation System of Australia and New Zealand (JAS-ANZ) see:
www.jas_anz.com.au/register.
AS/NZS 2210
Australian/New Zealand Standards
EN-ISO 20345
European Standards
ASTM F2413–11
USA Standards