discontinued - Ives

Manual Wall Holders
WS20
WS20X
Features:
• Constructed in cast brass.
• WS20 is furnished 3 countersunk mounting holes for drywall mounting.
• WS20X is furnished with threaded stud for masonry type mounting.
• Rubber bumpers feature off-set shoulder and threaded shank that screws
into body of holder.
• Hinged strike furnished matches body material and finish.
• WS20 meets ANSI/BHMA 156.16, L11341 WS20X meets ANSI/BHMA
156.16, L11351
• Finishes: US3, US4, US10, US10B, US26, US26D.
Base Overall Strike Strike
Product No. Diameter Projection Height Width
WS20 2-3/8" 4" 2" 1"
WS20X 2-3/8" 4" 2" 1"
WS445
Features:
• Constructed in cast of brass or aluminum.
• Unit functions as a stop but serves as a Hold-Open device when hook is manually
engaged in strike.
• Unit requires manual disengagement to release Hold-Open.
• Resilient, non-marring rubber tip.
• Packed with expansion shield and lead shield.
• Meets ANSI/BHMA 156.16, L11351 for brass and L31351 for aluminum.
• Finishes: US3, US4, US5, US10, US10B, US14, US15, US15A, US26, US26D, US28.
Product Base Base Engaged Strike Strike Strike
No. Diameter Projection Projection Height Width Projection
WS445 2-1/4" 3-11/16" 5-3/4" 1-1/2" 13/16" 13/16"
WS449
Features:
• Constructed in cast of brass or aluminum.
• Unit functions as a stop but serves as a Hold-Open device when hook is manually
engaged in strike.
• Unit requires manual disengagement to release Hold-Open.
• Resilient, non-marring rubber tip.
• Packed with wood screws.
• Meets ANSI/BHMA 156.16, L11341 for brass and L31341 for aluminum.
• Finishes: US3, US4, US5, US10, US10B, US14, US15, US15A, US26, US26D, US28.
Product Base Base Engaged Strike Strike Strike
No. Diameter Projection Projection Height Width Projection
WS449 2-1/4" 3-11/16" 5-3/4" 1-1/2" 13/16" 13/16"
D18
WS20 Shown