Stainless Handrail Systems - Amari Ireland

Recommendations

Info

1200 MIRROR POLISHED STAINLESS STEEL SYSTEM AISI 316 Part no. XL4421205S XL4421207S 1000 42.4 mm 640 AISI 316 Part no. XP44202PF XP44202PS 42.4 mm Y AISI 304 Part no. XL2421205S XL2421207S AISI 304 Part no. XP24202PF XP24202PS 38 www.aalco.co.uk 70 mm 380 mm For tube bar diam. Ø 42.4 x 2.0 mm Ø 12 mm Ø 42.4 x 2.0 mm Ø 12 mm For tube Part X113316 Part X030/S316 180 mm Ø 42.4 x 2.0 mm No Ø 42.4 x 2.0 mm Yes No. A 5 7 Y 170 mm 125 mm Pivoting Handrail Supp. 1000 180 mm AISI 316 Part no. XP44204PF 640 42.4 mm AISI 316 Part no. XP44204PF90 640 AISI 304 Part no. XP24204PF 1000 180 mm AISI 304 Part no. XP24204PF90 For tube Ø 42.4 x 2.0 mm For tube Ø 43.0 x 1.5 mm Pivoting Handrail Supp. Yes Pivoting Handrail Supp. No
HORIZONTAL PRESSURE RESISTANCE This test is meant to verify the possibility of deformations or break due to the application of a 3.5 kN load for 1min. The test is done applying the force on a specific point which is more subject to cause the failure of the tested object. The load is applied by a calibrated press that registers the applied strength and possible failure. All the clamps tested at TUV Italia s.r.l.’s laboratories passed the compression tests with no sign of deformations or fractures. TRACTION RESISTANCE The test consists of applying a 500 N (50kg) driving strength for 300 seconds to a sheet blocked by a glass clamp. At the end of the test there must be no movements, deformations or fractures. IMPACT RESISTANCE The test consists of impacting a glass supported by 4 clamps with a 50kg body, by hitting it in the most critical point of its structure. The pendulum must have a length of 1.5 mt and has to cover a 30° angle from the moment of the release to the moment of the impact with the glass. CORROSION RESISTANCE The products have been put inside a saline fog room, to carry out the test according to ISO 9227:2006. The room nebulises a solution of salt NaCI at 5% with pH level between 6.5 and 7.2 at a constant temperature of +35°C. Length of the test : 120 hours CERTIFICATION Arteferro has tested and certified quite a big variety of glass clamps including the Da Vinci Clamp System and the Glass System. They obtained TUV’s approval and certification. They have been approved according to DIN/EN 12600 safety standards. 50kg 50kg www.aalco.co.uk 39
Page 1 and 2: Uniclass L4421 CI/SfB (34) X Glass
Page 3 and 4: For: 8 & 10 mm glass thickness Part
Page 5 and 6: 90° FLAT END Part no. E452 E45210
Page 7 and 8: 4-WAY CORNER CONNECTOR Part no. E20
Page 9 and 10: LATERAL BASE 304 Part no. E118 Part
Page 11 and 12: HANDRAIL HOLDER ADJUSTABLE Part no.
Page 13 and 14: DEGREASING SPRAY Part no. E4051 ACC
Page 15 and 16: CROSSBAR HOLDER, INTERMEDIATE Part
Page 17 and 18: 120° 120° Ø 40 47 Ø 4.5 47.5 12
Page 19 and 20: 3 PIECES COMPLETE WITH SCREW AND EN
Page 21 and 22: GLASS U GLASS U is a new concept fo
Page 23 and 24: 3000 2500 1 2 3 GLASS U & GLASS U E
Page 25 and 26: Part no. E604 Part no. E605 Part no
Page 27 and 28: The Wire Rope range provides an int
Page 29 and 30: Support for External Wire Ropes wit
Page 31 and 32: LATERAL ANCHORAGE Part no. X113316
Page 33 and 34: Part no. X0102316 Part no. X458 Par
Page 35 and 36: Ø A 65 Ø A 22 22 53 65 Ø A Ø A
Page 37: All Newel Posts shown on pages 37 a
Page 41 and 42: E041110 E041300 E041310 E0700316 E0
Page 43 and 44: E406/26 E407 E407/26 E4072/C E4073
Page 45 and 46: ESF05 ESF05316 ESF06 ESF06316 ESF04
Page 47 and 48: X4042 X40650 X4072 X4308 X4309 X431

Stainless Handrail Systems - Amari Ireland

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?