Wire Rope Slings - Delta Rigging & Tools
Wire Rope Slings - Delta Rigging & Tools
Wire Rope Slings - Delta Rigging & Tools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CUSTOM SOCKET ASSEMBLIES<br />
<strong>Wire</strong> <strong>Rope</strong> <strong>Slings</strong><br />
<strong>Wire</strong> <strong>Rope</strong> assemblies with fittings permanently attached at ends are custom fabricated for use as boom pendants,<br />
guylines, raising lines, backstays, lifting spreaders, etc. These are offered in both poured, or spelter, sockets and<br />
mechanically swaged sockets. A Design Factor of five is applied in establishing Rated Capacities shown.<br />
EPOXY COMPOUND SPELTER SOCKET<br />
Epoxy compound is standard as the bonding medium<br />
surrounding wires inside the socket. Steel forgings are used for<br />
rope sizes 1/2" through 1-1/2", and cast steel fittings for larger<br />
sizes. Larger than 4" available on special order. Assembly length<br />
is measured from centerline of pin for open sockets and bearing<br />
point for closed sockets.<br />
OS-OS<br />
Same Plane<br />
Opposite Plane<br />
CS-CS<br />
Same Plane<br />
Opposite Plane<br />
OS-CS<br />
Same Plane<br />
Opposite Plane<br />
LENGTH<br />
ROPE<br />
DIAMETER<br />
(INCHES) VERTICAL<br />
1/2 2.7 4.9<br />
9/16 3.4 6.2<br />
5/8 4.1 7.6<br />
3/4 5.9 11<br />
7/8 8 15<br />
1 10 19<br />
1-1/8 13 24<br />
1-1/4 16 30<br />
1-3/8 19 36<br />
1-1/2 23 42<br />
1-5/8 26 49<br />
1-3/4 31 57<br />
1-7/8 35 64<br />
2 40 73<br />
2-1/8 44 82<br />
2-1/4 49 91<br />
2-3/8 55 101<br />
2-1/2 60 112<br />
2-5/8 66 122<br />
2-3/4 72 134<br />
2-7/8 78 145<br />
3 85 157<br />
3-1/8 92 169<br />
3-1/4 98 182<br />
3-3/8 106 196<br />
3-1/2 113 209<br />
VERTICAL<br />
BASKET<br />
53<br />
WIRE ROPE SLINGS