26.03.2013 Views

Vessel: TBN Date: 8.17.00 Equipment Name: Air Compressor (2 ea.)

Vessel: TBN Date: 8.17.00 Equipment Name: Air Compressor (2 ea.)

Vessel: TBN Date: 8.17.00 Equipment Name: Air Compressor (2 ea.)

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Vessel</strong>: <strong>TBN</strong> <strong>Date</strong>: 8.18.00<br />

<strong>Equipment</strong> <strong>Name</strong>: Capstan Motor Controller (1 <strong>ea</strong>.)<br />

Manufacturer: Technical Control Company<br />

Model #:<br />

Serial #:<br />

<strong>Name</strong>plate Data: 30hp, 460vac, 60hz, 3hp<br />

Location: Winch room, aft wall, stbd side<br />

Remarks:<br />

<strong>Vessel</strong>: <strong>TBN</strong> <strong>Date</strong>: 8.18.00<br />

<strong>Equipment</strong> <strong>Name</strong>: Capstan Motor (1 <strong>ea</strong>.)<br />

Manufacturer: Dings Dynamics Group<br />

Model #: AM4‐8517‐C<br />

Serial #: 37377‐2<br />

<strong>Name</strong>plate Data: 30hp, 900/1800rpm, 460vac, 60hz, 3ph, frame 365US, 31.8amps<br />

Location: Engineroom, Steering flat. Stbd side mounted on overh<strong>ea</strong>d<br />

Remarks:<br />

<strong>Vessel</strong>: <strong>TBN</strong> <strong>Date</strong>: 8.18.00<br />

<strong>Equipment</strong> <strong>Name</strong>: Capstan Motor Brake (1 <strong>ea</strong>.)<br />

Manufacturer: Dings Dynamics Group<br />

Model #: AMV11‐85175‐28 Coil part # H80062‐2<br />

Serial #: 67677‐2<br />

<strong>Name</strong>plate Data: “C” dimension (see instruction manual) 1.31 in (torque spring length). 175lb/ft,<br />

cont duty 480vac, 3.18KW, 60hz, 3ph, 2.56 in rush amps, .050 to .080 armature<br />

travel<br />

Location: Mounted on bottom of motor<br />

Remarks: There are 5 rotating friction discs and 4 stationary friction discs. There are 4 <strong>ea</strong><br />

small springs between <strong>ea</strong>ch stationary friction disc that fit over 4 small studs that<br />

are long enough to go through the last stationary friction disc. These parts<br />

(springs & washers are not shown in the instruction manual (Dings bulletin #BK<br />

4604))<br />

<strong>Vessel</strong>: <strong>TBN</strong> <strong>Date</strong>: 8.18.00<br />

<strong>Equipment</strong> <strong>Name</strong>: Centrifuge, Main Engine Lube Oil (4 <strong>ea</strong>.)<br />

Manufacturer: Spinner II Prod./FT Hudgins Inc. Houston, TX<br />

Model #: 600<br />

Serial #:<br />

<strong>Name</strong>plate Data: 16gpm @_psig Capacity, 6000cc of dirt<br />

Location: On floor plates, ah<strong>ea</strong>d of both main engines<br />

Remarks:<br />

<strong>Vessel</strong>: <strong>TBN</strong> <strong>Date</strong>: 8.18.00<br />

<strong>Equipment</strong> <strong>Name</strong>: Centrifuge, Main Engine Lube Oil, Drive Motor<br />

Manufacturer: Viking Pump Div., Houdaille Industries Cedar Falls, Iowa<br />

Model #: HL 475<br />

Serial #: Port Unit 3001285<br />

<strong>Name</strong>plate Data:<br />

Location:<br />

Remarks:

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!