Hattersley Technical Product Guide - FIVESUITE :: Content ...

Recommendations

Info

BALANCING VALVES - STATIC PN20 (THREADED) PN16 (COMPRESSION) Fig. 1832, 1832M, 1832L, 1832C, 1832MC, 1832LC Bronze Motorised Fixed Orifice Double Regulating Valve (Motorised FODRV) FEATURES AND BENEFITS • Provides precise and accurate flow regulation • Designed for circuits where combined functions of actuated regulation and flow measurement are required • Operated by motorised actuator • Integral fixed orifice commissioning valve and two port control panel – faster commissioning PRESSURE/ TEMPERATURE RATING Threaded Ends BS 7350 PN20 16 bar at 120ºC 20 bar at -10 to 100ºC Compressions Ends 5 bar at 120ºC 6 bar at 110ºC 10 bar at 65ºC 16 bar from -10 to 30ºC TEST PRESSURES (HYDRAULIC) Body: 30 bar Seat: 1.4 bar DP Note: Max DP = 1.2 bar DIMENSIONS AND WEIGHTS For Commissioning Valve Coefficients please refer to pages 49-51. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Hattersley Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 30 SPECIFICATION Actuator operated for on/off or modulating control. Double regulating device allows flow to be balanced. Integral fixed orifice. Supplied with 2 Figure 631 test points. Flow charts available. End connections threaded Sizes 1 /2 & 3 /4" to ISO 228 parallel. Sizes DN15 & DN20 when used with compression adaptors suitable for copper pipe to BS EN 1057 R250 (half hard). The 1832 Motorised FODRV is designed for installations in circuits where combined functions of actuated regulation and flow measurement are required. Nom Size in 1 /2 L 1 /2 M 1 /2 3 /4 A mm 87 87 87 96 A (compression) mm 105 105 105 118 B mm 50 50 50 51 Weight kg 0.41 0.41 0.41 0.45 MATERIAL SPECIFICATION Component Material Specification BS EN Stem DZR copper alloy 12165 CW602N Stem Seals EPDM Disc EPDM Bonnet DZR copper alloy 12165 CW602N Body Bronze 1982 CC491K Orifice Insert DZR copper alloy 12165 CW602N Fig. 631 Test Valve DZR copper alloy 12165 CW602N DIMENSIONAL DRAWINGS Accuracy of flow measurement is +5% across all driving settings. 1832: 1 /2" has a flow range of 0.061 to 0.132l/s 3 /4" has a flow range of 0.131 to 0.289l/s 1832M: 1 /2" medium flow version is suitable for flow applications in the range of 0.03 to 0.07l/s 1832L: 1 /2" low flow version is suitable for flow applications in the range of 0.01 to 0.03l/s Compression Ends 0 20 40 60 80 100 120 140 Temperature ˚C Technical Helpline: 0845 604 1790 E: tech-enquiries@hattersley.com W: www.hattersley.com Pressure bar Actuator Connecting Thread M30 x 1.5 for all sizes 18 16 14 12 10 8 6 4 2 0 Threaded Ends
Fig. 1200DR Bronze Double Regulating Valves FEATURES AND BENEFITS • Provides precise and accurate flow regulation • Easy to operate with handwheel • Robust bronze body for long service life • Suitable for high pressure applications DIMENSIONAL DRAWINGS PRESSURE/ TEMPERATURE RATING BS 5154 PN40 Series A 34 bar at 180ºC 40 bar from -10 to 120ºC B TEST PRESSURES (HYDRAULIC) Shell: 60 bar Seat: 44 bar Technical Helpline: 0845 604 1790 E: tech-enquiries@hattersley.com W: www.hattersley.com BALANCING VALVES - STATIC PN40 MATERIAL SPECIFICATION Component Material Specification BS EN ASTM Stem Manganese Bronze 12164 CW721R Gland Packing Asbestos Free Bonnet Bronze 1982 CC491K B62 Swivel Nut Manganese Bronze 12164 CW721R Disc Stainless Steel Seat Stainless Steel Body Bronze 1982 CC491K B62 SPECIFICATION Conforms to BS 7350:1990. Rising stem. Screwed bonnet. Flanged to BS EN 1092-3 PN40. Fitted with parabolic regulating disc in Stainless Steel, double regulating device and indicator. Flow charts available. D A E 44 40 36 32 DIMENSIONS AND WEIGHTS 28 24 Nom Size mm 15 20 25 32 40 50 20 A mm 133 146 162 184 200 238 16 B (open) mm 168 187 213 238 267 306 12 D mm 95 105 115 140 150 165 8 E (open) Weight mm kg 64 2.5 79 3.5 92 4.9 98 7.5 117 10 121 14 4 0 0 40 80 120 160 For Commissioning Valve Coefficients please refer to pages 49-51. T empe r ature ˚ C Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Hattersley Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. Pressure bar 200 240 31
Page 1 and 2: WATER HEATING VENTILATION AIR CON G
Page 3 and 4: Contents Introduction About Hatters
Page 5 and 6: An extensive range of low and mediu
Page 7 and 8: Technical Helpline: 0845 604 1790 E
Page 11 and 12: Fig. 1050, 1051 DZR Autoflow Fig. 2
Page 17 and 18: Fig. 1051 (Flow Control) Fig. 1053
Page 19 and 20: Fig. 3051 DZR AutoFlow FEATURES AND
Page 21 and 22: Fig. C305 AutoFlow Cartridges 1⁄2
Page 23 and 24: Balancing Valves - Static Hattersle
Page 25 and 26: Fig. 750 Hattersley Valve Controlle
Page 27 and 28: Fig. 1000L, 1000M DZR Brass Low & M
Page 29: Technical Helpline: 0845 604 1790 E
Page 33 and 34: Fig. M2000 Cast Iron Metering Stati
Page 35 and 36: Fig. M4000 Stainless Steel Metering
Page 37 and 38: Fig. M733DR Ductile Iron Globe Valv
Page 39 and 40: Fig. M737 Ductile Iron Variable Ori
Page 41 and 42: Fig. 973, 973G Ductile Iron with Do
Page 43 and 44: Fig. 5953, 5953G Cast Iron Metrex C
Page 45 and 46: Fig. 4993G Steel Fully-lugged Doubl
Page 47 and 48: Fig. 4993G Steel Fully-lugged Doubl
Page 51 and 52: Bronze Commissioning Valves Coeffic
Page 55 and 56: Adjuster Easily sets differential p
Page 57 and 58: DPCV Accessories TYPICAL INSTALLATI
Page 59 and 60: Hook-Up II Hook-Up II provides flow
Page 61 and 62: Commissioning Set Adjusts and sets
Page 63 and 64: Fig. C268, H268 Manual (without Dra
Page 65 and 66: Fig. C269, H269 MotoBalance (withou
Page 67 and 68: Fig. C264, H264 Autoflow (without D
Page 69 and 70: MultiComm On large projects, signif
Page 71 and 72: Pressure Independent Control Valves
Page 73 and 74: ProComm State of the-art electronic
Page 75 and 76: Air Vents/De-Aerators Offering an e
Page 77 and 78: Ball Valves The Hattersley Series o
Page 79 and 80: Fig. 100T, 100LS Threaded DZR - T-H
Page 81 and 82:
Fig. 100CT, 100CLS Compression Ende
Page 83 and 84:
Fig. 100CYL Gas Compression DZR - L
Page 85 and 86:
Fig. 110 DZR - 3-way (T-Port) Vent
Page 87 and 88:
Fig. 100MHU Male Hose Union FEATURE
Page 89 and 90:
Fig. 1807 DZR Strainer Ball Valve F
Page 91 and 92:
Butterfly Valves Hattersley butterf
Page 93 and 94:
Fig. C950 Wafer Type Butterfly Valv
Page 95 and 96:
Fig. 950W Semi-lugged Wafer Pattern
Page 97 and 98:
Fig. 951 and 951G Semi-lugged, Leve
Page 99 and 100:
Fig. 4970/4970G Ductile Iron Fully-
Page 101 and 102:
Fig. 4990G Steel Fully-lugged FEATU
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Check Valves Check valves permit fl
Page 109 and 110:
Fig. 47 Bronze - Swing Pattern FEAT
Page 111 and 112:
Fig. 49 Bronze - Vertical Lift Patt
Page 113 and 114:
Fig. 761 and 2761 Aquacheck ® Non
Page 115 and 116:
Fig. 3047 Bronze - Swing Pattern FE
Page 117 and 118:
Fig. M651 Cast Iron - Swing Pattern
Page 119 and 120:
Fig. 850 Cast Iron - Wafer Pattern
Page 121 and 122:
Gate Valves Hattersley gate valves
Page 123 and 124:
Fig. 30 - 30LS DZR FEATURES AND BEN
Page 125 and 126:
Fig. 30CLS Bronze FEATURES AND BENE
Page 127 and 128:
Fig. 33 Bronze FEATURES AND BENEFIT
Page 129 and 130:
Fig. 28 Bronze - Lever operated FEA
Page 131 and 132:
Fig. 609 Bronze FEATURES AND BENEFI
Page 133 and 134:
Fig. M549 Cast Iron FEATURES AND BE
Page 135 and 136:
Fig. M511 Cast Iron FEATURES AND BE
Page 137 and 138:
Fig. M544 - 544E Cast Iron FEATURES
Page 139 and 140:
Fig. 501 Cast Iron FEATURES AND BEN
Page 141 and 142:
Gland Cocks/Drain Taps Fitting Hatt
Page 143 and 144:
Fig. 81HU Bronze Hose Union FEATURE
Page 145 and 146:
Globe Valves Hattersley globe valve
Page 147 and 148:
Fig. 5 Bronze FEATURES AND BENEFITS
Page 149 and 150:
Fig. 13 Bronze FEATURES AND BENEFIT
Page 151 and 152:
Fig.17 Bronze FEATURES AND BENEFITS
Page 153 and 154:
Lubricated Plug Valves The principl
Page 155 and 156:
Fig. 170M (Screwed), 171M (Flanged)
Page 157 and 158:
Technical Helpline: 0845 604 1790 E
Page 159 and 160:
Technical Helpline: 0845 604 1790 E
Page 161 and 162:
Sealing Compound Recommendations Se
Page 163 and 164:
Radiator Valves Series 3000 radiato
Page 165 and 166:
Fig. 3150 Angle Wheel Head FEATURES
Page 167 and 168:
Fig. 3300LS Angle Lockshield FEATUR
Page 169 and 170:
Fig. 3180 Angle TRV FEATURES AND BE
Page 171 and 172:
Fig. 75/RS and 70/RT Accessories Fi
Page 173 and 174:
Strainers Scale and dirt in piping
Page 175 and 176:
Fig. 807/907 Bronze Y-Type FEATURES
Page 177 and 178:
Fig. 1807C DZR Strainer Ball Valve
Page 179 and 180:
Fig. 811 Ductile Iron Y-Type FEATUR
Page 181 and 182:
Public Health Range The Hattersley
Page 183 and 184:
Fig. 77 Thermostatic Mixing Valves
Page 185 and 186:
Fig. 430 Pressure Reducing Valves F
Page 187 and 188:
Fig. 249 & 249C Brass - Single & Do
Page 189 and 190:
Fig. 108C Mini Ball Valves - DZR Se
Page 191 and 192:
Fig. No. Index C4 .................
Page 193 and 194:
Safety & Control Valves For Air, St
Page 195 and 196:
Fig. 500T Combined Pressure and Tem
Page 197 and 198:
Figure 568 Anti-Vacuum Valves are u
Page 199 and 200:
The RPZ Anti-Pollution valve is a t
Page 201 and 202:
Fig. 300 Test Pump Figure 300 is a
Page 203 and 204:
Quality Guarantee Constructed from
Page 205 and 206:
Plant Room Valves Automatic Air Eli
Page 207 and 208:
Medium Pressure Hot Water Applicati
Page 209 and 210:
Fig. 1988 Three-way Vent Cocks Figu
Page 211 and 212:
Flange Tables This information is e
Page 213 and 214:
Nominal Size 32mm (1 1 /4") Technic
Page 215 and 216:
Nominal Size 80mm (3") Technical He
Page 217 and 218:
Nominal Size 200mm (8") Technical H
Page 219 and 220:
Nominal Size 400mm (16") Technical
Page 221 and 222:
Quality Assurance WRc Evaluation an
Page 224:
PO BOX 719, IPSWICH IP1 9DU HOME SA
show all

Hattersley Technical Product Guide - FIVESUITE :: Content ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?