RP20 and RP25 reflective photo electric switch - Witt Sensoric ...

Fine Adjustment
Accessories
R30/60 reflector
Size 30x81mm²
Range 0.5...8m
Optoelectronic systems direct from the manufacturer
- Development
- Design
- Manufacture
- Sales
After mounting the photo-switch the light beam
can be adjusted using 3 screws.
Important note!
The optical sensor is spring-mounted. All 3 screws
are unscrewed by 1 turn factory-made, the maximum
is 3 turns.
The optical sensor is optimally aligned when the
green LED lights up constantly.
Anti-condensation cover for R30/60 reflector
ISO 30/60
Material Polystyrene or Neopor
HW-LS20 mounting bracket
Material bright 1.5 1.4301 (V2A)
RD82 SW4 reflector
Size ø 82mm
Range 0.5...12m
We make only optoelectronics – and we do it right
LED lights up:
100 % of the cone of light is hitting the
reflector
LED flashing:
Less than 100 % of the cone of light is
hitting the reflector
R100/100 reflector
Size 100x100mm²
Range 0.5...15m
Anti-condensation cover for RD82 SW4 reflector
ISO RD82
Material Polystyrene or Neopor
HW-RD82 mounting bracket
Material bright 1.5 1.4301 (V2A)
Witt Sensoric GmbH
Gradestraße 48-50 . 12347 Berlin . Germany
Tel.: +49 (0) 30 / 75 44 94-0
Fax: +49 (0) 30 / 75 44 94-11
info@witt-sensoric.de
www.witt-sensoric.de
© Witt Sensoric GmbH 01/09 Foto Front: © Teckentrup