InnoTech Catalogue - Kitchen Planet | Custom Made Kitchens

Double-walled steel drawer system
InnoTech for under-oven bottom drawer
Height 54 mm
36 Preassembled drawer, height 54 mm
contains:
1 pcs drawer, powder-coated steel, silver, 3-sided,
preassembled, complete with silver-grey drawer bottom panel
2 pcs cover caps with Hettich logo
Order no. PU
0 077 941 1
Cover caps with customised imprint available on request
Drawer set, height 54 mm
contains:
1 set drawer profiles, powder-coated steel
1 set back panel connectors, powder-coated steel
2 pcs cover caps with Hettich logo
Pan-head screws ø 3,5 x 12 mm
Nominal length Order no./ PU
mm finish
silver anthracite
470 9 079 029 9 079 037 1 set
Cover caps with customised imprint available on request
Front connectors
• White plastic
Assembly Order no. PU
A With expanding dowel 0 077 911 40
B Screw-on 0 077 910 40
• Quick insertion and removal of the drawer
• No bottom panel machining
• Toolless assembly/disassembly and convenient
front panel adjustment
• Cabinet width 600 mm or customised cabinet widths
• Nominal length 470 mm
• Perfect drawer action with Quadro partial or full extension;
optionally with Silent System for closing quietly and gently
– adapted to 16 mm thickness of the cabinet sides
The following components are all you need for assembling
an InnoTech under-oven drawer for cabinet width of 600 mm:
36 Preassembled drawer, height 54 mm
+ Front connectors with expanding dowel or to screw-on
+ Quadro drawer slides see page 61
The following components are all you need for assembling
a customised InnoTech under-oven drawer:
Drawer set, height 54 mm
+ Front connectors with expanding dowel or to screw-on
+ Quadro drawer slides see page 61
+ Bottom and rear panel, 16 mm
A B
Fixing with countersunk
chipboard screw ø 3,5 mm
98 www.hettich.com.au · www.hettich.co.nz
36