ENTREE WOOD TM - UltraCraft
ENTREE WOOD TM - UltraCraft
ENTREE WOOD TM - UltraCraft
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Cabinet Construction : Precision Alignment<br />
• Cabinets are designed with a 1/16" reveal<br />
• Countertops with more than 11 ⁄4" overhang<br />
require shims be added under countertop<br />
EW1.8<br />
Three-way independent adjustment<br />
Cover Cap<br />
Remove cover cap if present.<br />
Side Adjustments<br />
Turn screw A in in or out to adjust<br />
the door horizontally from left to<br />
right. Range: 4mm (5/32")<br />
UP / DOWN<br />
Adjust by sliding grey tab forward<br />
or backward.<br />
Drawer ships in lowest position.<br />
Slide tab backward to raise drawer.<br />
HINGE<br />
Depth Adjustments<br />
Loosen screw B on turn, adjust door in or out to<br />
desired position, tighten screw. Range: 4 mm (5/32")<br />
Height Adjustments<br />
Loosen both screws C on mounting plate, adjust<br />
door up or down to desired position, tighten<br />
screws. Range 6 mm (15/16")<br />
<strong>WOOD</strong> DOVETAIL DRAWER with SOFT CLOSE<br />
MELAMINE DRAWER<br />
MAX OVERHANG: 1 1 ⁄4"<br />
TILT<br />
Adjust by twisting the tab at<br />
the rear of the glide.<br />
3mm Rise<br />
ENTRÉE <strong>WOOD</strong> : MARCH 2009