Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Kitchen, Bath & Clo<br />
“ F I N E A R C H I T E C T U R A L H A R D W A R E F O R Y O U R F I N E F U R N I T U R E ” ®<br />
Specialty Hardwa<br />
Supports<br />
Furniture Legs & Casters<br />
Drawer Pulls, Knobs & Door H<strong>and</strong>les<br />
Wire & Cable Management<br />
Technology-Into-Furniture Integratio<br />
2 0 1 1 S U P P L E M E N T<br />
Catalog 22-A
Winter 2011<br />
Dear Friends:<br />
Letter to Our Friends<br />
Wow! Where did the first decade of the 21st century go? Seems like just yesterday we were<br />
saying goodbye to the old century <strong>and</strong> welcoming a new one. This new decade was a fantastic<br />
skyrocket until it crashed in flames. And what a crash it has been! We can all forget the past two<br />
years...<br />
Actually we have been using the lull to develop new products <strong>and</strong> refine others, <strong>and</strong> here are the<br />
results. Please enjoy. There are new wire access grommets, power <strong>and</strong> data grommets, new legs<br />
<strong>and</strong> pulls, a whole new concept in a coat rack, new MPB’s <strong>and</strong>, of course, our legendary design<br />
contest inspirations. Plus a few surprises.<br />
Here <strong>and</strong> there you will see this new symbol. This is way cool. First, download onto your<br />
Get the free mobile app for your phone<br />
iPhone or Blackberry or similar phone http:/ / gettag.mobi<br />
the free app tag reader gettag.mobi. Then scan the “M”<br />
symbol by that product <strong>and</strong> – kaboom! – it will take you directly to a short explanatory video on<br />
that product.<br />
We’re always developing new ideas <strong>and</strong> fine tuning older ones. Between brochures we always<br />
post the new parts <strong>and</strong> changes on our highly acclaimed website, mockett.com. Please check it out.<br />
And many thanks for your loyalty. We appreciate it always, <strong>and</strong> we appreciate it far more during<br />
the slow times!<br />
May this decade be a good one for you.<br />
<strong>Co</strong>rdially,<br />
<strong>Doug</strong>las A. J. <strong>Mockett</strong><br />
CEO<br />
M<br />
© 2011 <strong>Doug</strong> <strong>Mockett</strong> & <strong>Co</strong>mpany, Inc./The March Group
Table of <strong>Co</strong>ntents<br />
Technology-Into-Furniture Integration<br />
PCS51 Series - Beethoven ......................... 4<br />
PCS50 Series ......................... 4<br />
PCS52 Series ......................... 5<br />
PCS54 Series ......................... 5<br />
PCS46 ......................... 6<br />
PCS36 Options ......................... 6<br />
PCS21/M ......................... 7<br />
PCS5/M, PCS17/M & PCS18/M ......................... 7<br />
PCS34A ......................... 8<br />
PCS47, PCS48 & PCS49 ......................... 9<br />
CPU8 & KP7 ....................... 10<br />
KP8 & KP9 ........................11<br />
Wire & Cable Management<br />
Metallic Silver Grommets & CHP3 - Star Grommet ....................... 12<br />
MAX Series ....................... 13<br />
Stainless Steel TM Series ....................... 14<br />
WM27 & WM28 ....................... 14<br />
Drawer Pulls & Knobs<br />
DP152 Series ....................... 16<br />
DP174 Series, DP175 Series & DP176 Series ....................... 17<br />
DP177 Series, DP178 Series & DP179 Series ....................... 18<br />
DP180 Series, DP181 Series & DP182 Series ....................... 19<br />
DP183 Series, DP184 & DP185 ....................... 20<br />
DP186, DP187 & DP188 ....................... 21<br />
DP189, DP190 ....................... 22<br />
DP191, DP192, DP193 & DP194 Series ....................... 23<br />
DP195, DP196, DP197 & DP198 ....................... 24<br />
DP199, DP200 & DP105 New Sizes ....................... 25<br />
Supports<br />
MPB12 Series & MPB/CAP2 ....................... 26<br />
MPB Satin Stainless Series & APG Series ....................... 27<br />
SH40 - O’<strong>Co</strong>nnor Shelf Support ....................... 30<br />
SH41 Series ....................... 30<br />
SH35, SH36 & SH37 ....................... 32<br />
SWS6A ....................... 32<br />
Furniture Legs<br />
Bolen Leg ....................... 34<br />
FL16 ....................... 34<br />
Parsons Table Base ....................... 35<br />
Specialty Hardware & Accessories<br />
CH50 - Lean On <strong>Co</strong>at St<strong>and</strong> ....................... 36<br />
HNGR6 ....................... 36<br />
Wood Air Vents ....................... 36<br />
DWR5A & DWR5B ....................... 37<br />
........................<br />
Price List<br />
Price List ....................... 38
“You Worry About the<br />
Big Things,<br />
Let Us Worry About the<br />
Little Details”<br />
Dear Friends –<br />
The quote above is from the first direct mail letter I wrote <strong>and</strong> sent out in 1980. It remains as true<br />
in 2011 as it did 30 years ago.<br />
Years have gone by, products <strong>and</strong> product design has changed dramatically, but we still live by<br />
those words. You worry about the Big Picture <strong>and</strong> let us worry about the little details – details that<br />
make your Big Picture st<strong>and</strong> out.<br />
We are proud to be at the forefront of innovative furniture components, hardware <strong>and</strong> accessories.<br />
Enjoy the comparisons between our original ideas <strong>and</strong> some of our newest ones:<br />
1980 1995 2010<br />
1980 1995 2010<br />
Three decades<br />
later <strong>and</strong> still<br />
our philosophy<br />
We are even more proud of our legendary customer service <strong>and</strong> our responsiveness to your needs.<br />
We are here for you <strong>and</strong> so is our inventory which usually ships the same day you order.<br />
The last 30 years have been a great ride, thanks to your support; we eagerly look forward to the<br />
next 30. We appreciate the opportunity to enhance your designs.<br />
Sincerely,<br />
<strong>Doug</strong>las A. J. <strong>Mockett</strong>
2009<br />
Design <strong>Co</strong>ntest<br />
Winners<br />
Entries from 21<br />
<strong>Co</strong>untries, Two<br />
Fine First Place Awards<br />
2009 was the first year we accepted entries via email. We had more than 60 of them<br />
via email <strong>and</strong> a gr<strong>and</strong> total of 120. Usually we get about 100, so in a down economy<br />
it was gratifying to see a 20% increase. And entries from all over the world, from every<br />
continent. So maybe almost halfway through its second decade, our little competition is<br />
making its mark!<br />
The judges found two entries to be worthy of First Place.<br />
John O’<strong>Co</strong>nnor, Griffith, IN<br />
John designed an extraordinary extruded aluminum shelf<br />
support. As he said in his submission, “... simple architectural<br />
form creates an eye-catching <strong>and</strong> pleasing design”.<br />
It will be about 6” by 8” overall in size <strong>and</strong> quite sturdy.<br />
It can be used with either the 6” or 8” side as the support,<br />
to accommodate shelves up to 10” deep. We think we’ll bevel<br />
the edges <strong>and</strong> make it available in a nice Satin Aluminum finish<br />
as well as Black Anodized. See page 30.<br />
Jeffrey Bolen, Marina del Rey, CA<br />
Perhaps we’ve been at the furniture parts biz<br />
too long. There aren’t too many table leg designs<br />
that elicit a “wow!” from our long time judges.<br />
(Or maybe we’ve had the judges too long?)<br />
Jeffrey, an architect, sent in a leg design that was<br />
a “WOW!”. It is very unique. Made of stainless<br />
steel <strong>and</strong> dark wood with stainless fasteners,<br />
with a stepped design that is broad at the top<br />
<strong>and</strong> steps down to almost a point.<br />
Perfect for your contemporary furniture designs!<br />
We will be offering it on a custom basis, so we can<br />
make it to your exact dimension, stainless finish,<br />
wood choice, <strong>and</strong> wood finish.
TeCHNOLOGy-INTO-FuRNITuRe INTeGRATION<br />
(A)<br />
6' CORD<br />
PLUG<br />
PCS51 Series - Beethoven<br />
2002 Design <strong>Co</strong>mpetition Winner<br />
Designed by: Marvin <strong>Co</strong>oke, St. Louis, MO<br />
This model has proven frustrating to make.<br />
However, after some fine tuning, we sharpened<br />
the design <strong>and</strong> are now proud to introduce it.<br />
Press down on the top <strong>and</strong> flip the cradle<br />
mechanism all the way around to access<br />
the power <strong>and</strong> data components. Unit rotates<br />
180° <strong>and</strong> locks in position with the power<br />
<strong>and</strong> data exposed, <strong>and</strong> then flips back<br />
to hide away when not in use.<br />
It is perfect for blending with any surface.<br />
It has a custom slot across the top to insert<br />
any matching wood or laminate. Or you<br />
can choose st<strong>and</strong>ard Satin Aluminum<br />
or Black Anodized finish.<br />
Four st<strong>and</strong>ard configurations available.<br />
<strong>Co</strong>mes with a 6 ft. cord.<br />
Finishes: Satin Aluminum, Black Anodized.<br />
1-7/16"<br />
(B) CUT OUT<br />
U.L. Listed.<br />
PCS51<br />
PCS51A<br />
<strong>Co</strong>nfiguration<br />
2 power / 2 data<br />
Overall (A)<br />
7<br />
Cut Out (B)<br />
1 /8” x 4 5 /8” 6 29 /32” x 4 1 /2”<br />
PCS51B 3 power / 2 data 8 5 /8” x 4 5 /8” 8 13 /32” x 4 1 /2”<br />
PCS51C 3 power / 3 data 10 1 /8” x 4 5 /8” 9 29 /32” x 4 1 /2”<br />
PCS51D* 4 power / 4 data 13 1 /8” x 4 5 /8” 12 29 /32” x 4 1 (C) CUSTOM INSERT<br />
(NOT INCLUDED)<br />
Shown with custom wood insert<br />
/2”<br />
*Circuit breaker plug. Custom configurations available.<br />
(A) M<br />
Shown with st<strong>and</strong>ard Aluminum insert<br />
(A)<br />
1-13/32"<br />
(B) CUT OUT<br />
6' CORD<br />
PLUG M<br />
Get the free mobile app for your phone<br />
M<br />
http:/ /gettag.mobi<br />
(C) CUSTOM INSERT<br />
(NOT INCLUDED)<br />
1-13/32"<br />
(B) CUT OUT<br />
PCS50A-94<br />
6' CORD<br />
PLUG<br />
PCS50 <strong>Co</strong>nfiguration Overall (A) Cut Out (B)<br />
PCS50A 2 power / 1 data 6 21 /32” x 6 11 /32” 6 11 /32” x 5 31 /32”<br />
PCS50B 2 power / 2 data 8 5 /32” x 6 11 /32” 7 27 /32” x 5 31 /32”<br />
PCS50C 3 power / 2 data 9 21 /32” x 6 11 /32” 9 11 /32” x 5 31 /32”<br />
PCS50D 3 power / 3 data 11 5/32” x 6 11/32” 10 27/32” x 5 31/32”<br />
PCS50e* 4 power / 2 data 11 5 /32” x 6 11 /32” 10 27 /32” x 5 31 /32”<br />
*Circuit breaker plug. Custom configurations available.<br />
Get the free mobile app for your phone<br />
Get the free mobile app for your phone<br />
http:/ / gettag.mobi<br />
http:/ / gettag.mobi<br />
PCS50 Series<br />
Unique pop up design incorporates a<br />
brush liner into the front edge for wire<br />
management. Gently push on the front<br />
end of the unit <strong>and</strong> the spring loaded lid<br />
pops up revealing a flat face for easy access<br />
to the power <strong>and</strong> data components. Clicks<br />
closed for a clean <strong>and</strong> low profile look. When<br />
the unit is closed, it allows the brush liner<br />
to catch <strong>and</strong> hold any stray cabling above<br />
the surface for future use to avoid stumbling<br />
under the desk to find it. A large gap area<br />
allows easier user access <strong>and</strong> wire pass<br />
through from underneath. Brush liner also<br />
prevents dust from getting into the unit.<br />
PCS50 enables plugs to remain in unit while<br />
closed. Five stock configurations to choose<br />
from. Also available hardwired; 5 to 8 week<br />
lead time.<br />
Finishes: Satin Aluminum, Black Anodized.<br />
U.L. Listed.<br />
www.mockett.com 800.523.1269<br />
4
LED SENSOR (A)<br />
1-7/16"<br />
3-9/16"<br />
(B) CUT OUT<br />
(A)<br />
6' CORD<br />
PLUG<br />
9' CORD<br />
LED SENSOR<br />
PCS54 Series<br />
Features a clean unobtrusive look on any<br />
desk or table. A thin, hinged lid opens<br />
manually to reveal its power <strong>and</strong> data com-<br />
ponents which are housed on the face of the<br />
angled back panel. The lid is lifted up to ac-<br />
cess the unit, <strong>and</strong> it can remain open or closed<br />
while the unit is in use. The gap between the<br />
lid <strong>and</strong> the frame allows wires to be plugged<br />
in while the lid is in the closed position.<br />
Three st<strong>and</strong>ard configurations available.<br />
Custom screen printing is available on this<br />
model with GoGraphics! Two commissioned<br />
art pieces available in eight different orienta-<br />
tions, (visit mockett.com/PCS54 for more<br />
options), or send in your own custom print to<br />
give workstations some personality <strong>and</strong> make<br />
them come alive. 6 ft. cord. Also available<br />
hardwired; 5 to 8 week lead time.<br />
Finishes: Satin Aluminum, Black Anodized.<br />
PCS52<br />
PCS52A<br />
<strong>Co</strong>nfiguration<br />
2 power / 5 data<br />
Overall (A)<br />
13<br />
Cut Out (B)<br />
11 /32” x 4 5 /8” 13 1 /16” x 4 3 PCS52B 3 power / 3 data 13<br />
/8”<br />
11 /32” x 4 5 /8” 13 1 /16” x 4 3 /8”<br />
PCS52C 4 power / 4 data 16 11 /32” x 4 5 /8” 16 1 /16” x 4 3 PCS52A-90 - See video online at www.mockett.com/pcs52<br />
M<br />
/8”<br />
Custom GoGraphics! finish, allow 5 to 8<br />
(B) CUT OUT<br />
week lead time.<br />
U.L. Listed.<br />
Get the free mobile app for your phone<br />
http:/ /gettag.mobi<br />
M<br />
Get the free mobile app for your phone<br />
Get the free mobile app for your phone<br />
http:/ / gettag.mobi<br />
http:/ / gettag.mobi<br />
PCS52 Series - One Touch<br />
PCS54 <strong>Co</strong>nfiguration Ovrall (A) Cut Out (B)<br />
PCS54A 2 power / 4 data 11 3 /8” x 5 5 /16” 11” x 5”<br />
PCS54B 3 power / 3 data 11 3 /8” x 5 5 /16” 11” x 5”<br />
PCS54C* 4 power / 4 data 14 3 /8” x 5 5 /16” 14” x 5”<br />
*Circuit breaker plug. Custom configurations available.<br />
This wonder of modern technology is the<br />
perfect high tech solution to power your<br />
high tech accessories, <strong>and</strong> it all starts<br />
with a single touch of a finger. Power <strong>and</strong><br />
data options are literally at your fingertips!<br />
Simply rub your finger over the LED<br />
sensor panel, watch for the light to turn<br />
from blue to red, <strong>and</strong> the unit automatically<br />
rotates to uncover the power <strong>and</strong><br />
data components below. When no longer<br />
in use, sweep your finger over the LED<br />
sensor once again <strong>and</strong> the unit automatically<br />
flips back into the closed position.<br />
Visit mockett.com/PCS52 to see it work!<br />
A blank top panel in the closed position<br />
allows the unit to blend with the<br />
counter top for an unsuspecting look.<br />
An awe-inspiring, fully automated mechanized<br />
system that operates solely by the<br />
power of touch. A truly innovative design<br />
that mechanically fuses convenience <strong>and</strong><br />
style. Available in three stock sizes,<br />
each with different power <strong>and</strong> data<br />
configurations.<br />
Finishes: Matte Black.<br />
U.L. Listed.<br />
www.mockett.com 800.523.1269<br />
5<br />
TeCHNOLOGy-INTO-FuRNITuRe INTeGRATION<br />
PCS54C-GoGraphics! by Marumiyan
TeCHNOLOGy-INTO-FuRNITuRe INTeGRATION<br />
PCS46<br />
Ideal for large conference room settings,<br />
this dual sided unit is perfect for accom-<br />
modating multiple users. With a generous<br />
sized opening <strong>and</strong> deep bottom surface<br />
area, it is easily accessible from either side<br />
with the power <strong>and</strong> data seated on inward<br />
slanting faces. It comes equipped with six<br />
power outlets rated 15A/125VAC <strong>and</strong> four<br />
Category 5e data connections. The two lids<br />
open <strong>and</strong> tuck away on either side, or can<br />
remain closed with a gap in the middle to<br />
allow cords to be plugged in while the<br />
unit is in use. Insert options available.<br />
PCS46 mounts securely <strong>and</strong> easily.<br />
Also available hardwired;<br />
5 to 8 week lead time.<br />
Housing finishes: Aluminum, Steel.<br />
Aluminum box finishes: Satin<br />
Aluminum, Black Anodized.<br />
Steel Box finishes:<br />
Matte Black, Metallic Silver.<br />
U.L. Listed.<br />
15" X 9”<br />
6' CORD<br />
PCS36A-90 PCS36B-90<br />
3-13/16"<br />
14-1/8" X 8-1/4"<br />
CUT OUT<br />
View the complete PCS36 Series online at www.mockett.com/pcs36<br />
PCS36-GoGraphics! by Kiselev PCS36-GoGraphics! by Marumiyan<br />
PCS36 & PCS36/2 Options<br />
PCS36 series in New Black Anodized Finish!<br />
Previously only available as a custom finish, the<br />
new Black Anodized finish is now available as stock.<br />
The same classy look <strong>and</strong> sheen of our Satin<br />
Aluminum model, but now in a sophisticated<br />
Black Anodized. Offering new versatility to our<br />
already popular PCS36 <strong>and</strong> PCS36/2 series, the<br />
Black Anodized finish now opens up an entirely new<br />
option to suit your power <strong>and</strong> data needs.<br />
PCS36 with GoGraphics!<br />
GoGraphics! Our PCS36 Series is now available with<br />
the option of a custom painted screen finish. Why<br />
settle for monotone, bl<strong>and</strong>, <strong>and</strong> dull furniture when<br />
you can add a splash of color <strong>and</strong> make your work<br />
surface come alive? Two commissioned art pieces<br />
available in eight different orientations, (visit<br />
mockett.com/PCS36 for more options), or send<br />
in your own graphic <strong>and</strong> have a custom screen print<br />
match an existing top or to give your work surface<br />
a kick. Allow 5 to 8 weeks for production.<br />
www.mockett.com 800.523.1269<br />
6
PCS5/M, PCS17/M, PCS18/M<br />
Each of these models is now available with a new lid<br />
featuring a new slot design. This new design allows<br />
cords to be plugged in while the lid is closed <strong>and</strong><br />
the unit is in use. While the previous model had<br />
two small holes for wire pass-through, the new slot<br />
design has a long, continuous opening which makes<br />
the lid easier to open <strong>and</strong> allows wires to move<br />
freely back <strong>and</strong> forth across the front of the unit.<br />
A simple modification on a classic design that goes<br />
a long way to enhance ease <strong>and</strong> accessibility.<br />
Finishes: Satin Stainless Steel, Matte Black.<br />
PCS18/M in Matte Black only.<br />
PCS17/M<br />
PCS21/M-94<br />
5-1/4" X<br />
11-3/4"<br />
CUT OUT<br />
12-5/8" X 6"<br />
9' CORD<br />
3-1/16"<br />
PCS21/M<br />
Horizontal, recessed grommet now available<br />
in an aluminum housing with a new<br />
rectangular trim ring. The horizontal aluminum<br />
casing provides a strong, durable<br />
body with an overhead enclosure protecting<br />
plugs <strong>and</strong> wires. Features a manual top<br />
that sweeps upwards above the surface<br />
<strong>and</strong> locks into place at a 60° angle to<br />
access the power <strong>and</strong> data components.<br />
The cover then closes with the plugs in<br />
place, concealed by a flexible strip. The<br />
unit lays flat <strong>and</strong> virtually flush with the<br />
desktop in the closed position. Wide face<br />
for added ease of accessibility. <strong>Co</strong>nsists<br />
of three power outlets rated 15A/125VAC<br />
<strong>and</strong> two Category 5e data modules.<br />
Includes a 9 ft. electrical cord.<br />
Finishes: Satin Aluminum, Matte Black.<br />
U.L. Listed.<br />
PCS5/M<br />
PCS18/M<br />
www.mockett.com 800.523.1269<br />
7<br />
TeCHNOLOGy-INTO-FuRNITuRe INTeGRATION
TeCHNOLOGy-INTO-FuRNITuRe INTeGRATION<br />
PCS34A<br />
Now Available with Data<br />
Introducing the first ever Power <strong>and</strong><br />
<strong>Co</strong>mmunications Grommet specifically<br />
designed for areas with potential spill<br />
hazards. The new data feature creates<br />
new network versatility <strong>and</strong> opens new<br />
avenues for usage. A water-tight seal<br />
from the rubber trim ring makes this<br />
the ideal addition to any kitchen,<br />
laboratory, or medical office, with<br />
the data connections providing<br />
added convenience <strong>and</strong> functionality.<br />
This new configuration consists of two<br />
power outlets rated 15A/125VAC <strong>and</strong><br />
two Category 5e data modules<br />
with an 8 1/2 ft power cord.<br />
Simply pull up on the two metal D-rings<br />
to pull the unit up out of the table. The<br />
unit clicks <strong>and</strong> locks into place once fully<br />
extended above the surface. To close the<br />
unit, press the red button on the bottom<br />
<strong>and</strong> push the unit back down into its<br />
base. Also has a reset switch that<br />
lights up when the power is “on.”<br />
Installation is as easy as drilling a 3 5/32”<br />
hole <strong>and</strong> dropping the unit into the table.<br />
A locking flange piece is h<strong>and</strong> tightened<br />
from underneath to hold the unit snugly<br />
in place. Also available in an all power<br />
configuration as PCS34.<br />
Designed as a relocatable power tap<br />
for retrofit only. Does not meet<br />
NEC requirements.<br />
Kitchen use requires GFI.<br />
4-1/16" DIA.<br />
3-5/32" DIA.<br />
CUT OUT<br />
12-19/32"<br />
8.5' CORD<br />
www.mockett.com 800.523.1269<br />
8
PCS47A-95<br />
PCS48B-95<br />
PCS49A-90<br />
PCS47 <strong>Co</strong>nfiguration<br />
PCS47A 1 power/3 data<br />
PCS47B 2 power/2 data<br />
PCS47C* 4 power only<br />
*Circuit breaker plug.<br />
PCS48 <strong>Co</strong>nfiguration<br />
PCS48A iPod®/iPhone® dock/2 power<br />
PCS48B iPod®/iPhone® dock/2 power/2 data<br />
PCS49 <strong>Co</strong>nfiguration<br />
PCS49A 2 power/2 data<br />
PCS49B* 4 power only<br />
*Circuit breaker plug.<br />
This innovative series is available in three styles,<br />
each mounted in its own unique way. With the<br />
option to mount in or above the desk st<strong>and</strong>ing<br />
upright or laying flat, these have you covered!<br />
PCS47<br />
This vertical tower offers all the convenience<br />
of a pop up unit without actually having to drill<br />
into the table. With a clamp mount to the edge<br />
of a desk or table top, this unit st<strong>and</strong>s above the<br />
surface <strong>and</strong> can be moved at any time.<br />
Three stock options for power <strong>and</strong> data<br />
configurations.<br />
Finishes: Black, White.<br />
U.L. Listed.<br />
PCS48<br />
When a work surface simply won’t allow a recessed<br />
unit or a “permanent” power solution, simply clamp<br />
this power <strong>and</strong> data system onto the side of the desk<br />
<strong>and</strong> problem solved! Horizontal frame with soft,<br />
rounded edges sits at an angle above the surface for<br />
easy access. Also comes equipped with an<br />
iPod ® /iPhone ® dock which snaps closed when<br />
not in use. A charging station that<br />
doesn’t involve any wires? What a relief!<br />
Available in two st<strong>and</strong>ard configurations.<br />
Also available hardwired; 5 to 8 week lead time.<br />
Finishes: Black, White.<br />
U.L. Listed.<br />
PCS49<br />
With a flat, horizontal face that sits slightly above<br />
the desktop, this model is ideal for workstations<br />
that require heavy usage but still want to maintain<br />
a streamlined look. No guessing games here.<br />
No hideaways or pop-ups to figure out; this unit<br />
is exposed at all times for easy access. Rounded<br />
edges <strong>and</strong> a sleek finish for a universally subtle,<br />
yet sophisticated look. Two st<strong>and</strong>ard<br />
configurations available. Also available<br />
hardwired; 5 to 8 week lead time.<br />
Finishes: Black, White.<br />
U.L. Listed.<br />
10-1/4"<br />
6' CORD<br />
PLUG<br />
www.mockett.com 800.523.1269<br />
9<br />
PCS47A<br />
IPOD/IPHONE<br />
(NOT INCLUDED)<br />
5-15/32"<br />
2-31/32"<br />
3/4" MIN.<br />
1-3/4" MAX.<br />
MATERIAL THICKNESS<br />
3"<br />
PCS48B<br />
8" X 3"<br />
3-1/32"<br />
3/4" MIN.<br />
1-5/8" MAX.<br />
MATERIAL THICKNESS<br />
PCS49A<br />
(A)<br />
3"<br />
TeCHNOLOGy-INTO-FuRNITuRe INTeGRATION<br />
5/8" MIN.<br />
1-7/16" MAX.<br />
MATERIAL THICKNESS<br />
6' CORD PLUG<br />
PCS48 Length (A)<br />
PCS48A 6 5 /8”<br />
PCS48B 11”<br />
2-9/32"<br />
6-3/4" X 2"<br />
CUT OUT<br />
6' CORD PLUG
TeCHNOLOGy-INTO-FuRNITuRe INTeGRATION<br />
CPu8<br />
Adjustable CPu Holder<br />
Universal design allows for any size<br />
computer to be suspended underneath<br />
the desk for easy user access. Opens up<br />
extra floor space for easier cleaning<br />
under the workstation. Fits any computer<br />
10” to 15” tall. Simply rotate the knob to<br />
adjust the height. Rubber pads on the<br />
top <strong>and</strong> bottom will securely hold the<br />
computer in place without scratching<br />
8-3/4"<br />
13-5/8" MIN.<br />
19-11/16" MAX.<br />
10"<br />
KP7/M2-90<br />
the surface area.<br />
Weight capacity: 30 lbs.<br />
<strong>Co</strong>lor: Two-tone Grey.<br />
KNOB<br />
CPu8-92<br />
KP7<br />
Adjustable keyboard tray combining comfort<br />
with a sleek <strong>and</strong> stylish look. Ultra thin with<br />
soft, rounded edges. A thick removable gel<br />
pad lines the front edge of the tray for optimal<br />
wrist support. Includes a round, swiveling<br />
mouse platform that can be mounted on<br />
the left or right side. The front of the mouse<br />
platform features a h<strong>and</strong>y bumper railing<br />
with a nifty shape that prevents the mouse<br />
from sliding over the edge. A must have as a<br />
complementary accessory for contemporary<br />
office furniture.<br />
<strong>Co</strong>lor: Black.<br />
www.mockett.com 800.523.1269<br />
10<br />
11"<br />
27-3/4"<br />
WRIST PAD<br />
3-1/4"
11"<br />
KP9<br />
Unique design with grip pads on either<br />
side of the top of the tray to help provide<br />
traction for the keyboard <strong>and</strong> keep it in<br />
place. The oblong mouse platform can<br />
be mounted on either the left or right<br />
side <strong>and</strong> swivels to the optimal setting.<br />
A simple industrial overall look, but<br />
equipped with all the right accessories.<br />
Also includes a gel pad for wrist support<br />
11-1/2"<br />
28-3/4"<br />
28-1/2"<br />
KP8/M2-90<br />
WRIST PAD<br />
<strong>and</strong> clips along the back side<br />
WRIST PAD<br />
2-9/16"<br />
TO 3-21/32"<br />
ADJUSTMENT<br />
for wire management.<br />
3-3/16"<br />
<strong>Co</strong>lor: Black.<br />
KP9/M2-90<br />
KP8<br />
Similar to the KP7, however this keyboard<br />
tray sets itself apart with its amazingly<br />
functional mouse platform. This<br />
omni-directional platform can swing from<br />
the left to the right, sweeping across the<br />
front of the tray, <strong>and</strong> it also tilts or rotates<br />
all the way around to sit above or below<br />
the keyboard surface. This is a great<br />
design for training tables or workstations<br />
that have multiple users as the mouse<br />
platform can easily accommodate right or<br />
left-h<strong>and</strong>ed users. The slim design of the<br />
tray itself along with the soft removable<br />
gel pad across the front edge make this<br />
an extremely practical stroke of genius.<br />
<strong>Co</strong>lor: Black.<br />
www.mockett.com 800.523.1269<br />
11<br />
TeCHNOLOGy-INTO-FuRNITuRe INTeGRATION
WIRe & CABLe MANAGeMeNT<br />
Metallic Silver Grommets<br />
Our entire line of plastic grommets is now available<br />
in a stunning Metallic Silver color. All of them – 10<br />
round grommets, our RG rectangular <strong>and</strong> LO large<br />
oval, <strong>and</strong> now 15 different colors <strong>and</strong> finishes, our<br />
plastic grommets can fit virtually every size hole<br />
or plug. A removable cap completely covers the<br />
grommet liner <strong>and</strong> has our patented “flip-top” tab<br />
feature. Sold individually as caps <strong>and</strong> liners or as a<br />
set. Forstner Bits are available for all sizes.<br />
CHP3 - Star Grommet<br />
Designed by: Michael W. Davis - Rockford, MN<br />
2008 Design <strong>Co</strong>ntest Winner<br />
Tired of rummaging under the desk for loose cords<br />
<strong>and</strong> plugs? This h<strong>and</strong>y grommet keeps all those<br />
cords at your fingertips above the surface without<br />
the need to scour through heaps of cables below.<br />
It holds up to five cords. Each one of those cords<br />
is held by a retainer ball which prevents the plug<br />
from falling through. Each ball has a slit where<br />
the cable is inserted. Designed to go into a 2 1/2”<br />
hole cut <strong>and</strong> a 3” overall diameter. The CHP3 set<br />
includes a cap, liner, <strong>and</strong> five balls.<br />
<strong>Co</strong>lors: Black w/ Black balls, Navy Grey with<br />
Navy Grey balls, White with Electric Pink balls.<br />
<strong>Co</strong>lor <strong>Co</strong>mbinations Cap & Liner Balls<br />
CHP3-90/90 Black Black<br />
CHP3-92N/92N Grey Grey<br />
CHP3-93/50E White Pink<br />
23/32" DIA.<br />
7/16" DIA.<br />
3" DIA.<br />
2-1/2" DIA.<br />
CUT OUT<br />
www.mockett.com 800.523.1269<br />
12
MAX3-94<br />
MAX2 Series<br />
Hinged Aluminium with brush grommet –<br />
Our popular aluminum brush grommet series<br />
is now available with a hinged lid for easier<br />
wire access. Simply lift the aluminum lid to<br />
access the grommet hole to insert wires <strong>and</strong><br />
pull them through the brush liner before<br />
closing the top. The dust-blocking brush liner<br />
across the front of the unit prevents cables<br />
from falling down through the table when<br />
not in use by grabbing the wires <strong>and</strong> keeping<br />
them in place. Sits nearly flush with the table<br />
surface.<br />
Finish: Satin Aluminum.<br />
27/32"<br />
(B) CUT OUT<br />
14-3/16" X 4-23/32"<br />
13/16"<br />
MAX1/A-90<br />
1-17/32"<br />
MAX1 Series Grommet in Black<br />
Our sleek new Max series grommet is<br />
now available in a sophisticated Black<br />
Anodized finish creating a more versatile<br />
look in any furniture. A staple in our line<br />
of stylish grommets, our Max series<br />
brings an elegant look to otherwise bl<strong>and</strong><br />
wire management applications. Equipped<br />
with a brush liner that prevents cables<br />
from dropping through the surface <strong>and</strong> a<br />
new lid design that features a wider opening<br />
to allow more wire access.<br />
Finishes: Satin Aluminum, Black.<br />
MAX3 Series<br />
Hinged Aluminium with brush <strong>and</strong><br />
rounded end caps, two finishes –<br />
This extension of the Max series features<br />
a lockable lid <strong>and</strong> rounded end caps on<br />
either side. With the same hinged door<br />
as the MAX2 model, the top is lifted to<br />
allow wires to be inserted through the<br />
brush liner. Only now there is a sliding<br />
plastic tab on the underside of the lid that<br />
slides to either side of the unit locking<br />
the lid in place in the closed position.<br />
When the tab is slid all the way to one<br />
side, a smaller notch grabs the edge of<br />
the frame from underneath. Since the<br />
tab is attached to the underside of the lid,<br />
this locking mechanism with the frame<br />
prevents the lid from opening.<br />
Finishes: Satin Aluminum, Brushed<br />
Satin Aluminum.<br />
www.mockett.com 800.523.1269<br />
13<br />
(A)<br />
MAX2 Overall (A) Cut Out (B) C<br />
MAX2/A 3 15 /16” Sq. 3 19 /32” Sq. 9 /16”<br />
MAX2/B 9 15 /32” x 3 15 /16” 3 15 /16” x 3 19 /32” 9 /16”<br />
MAX2/C 4 23 /32” Sq. 4 3 /8” Sq. 1”<br />
MAX2/D 17 23 /32” x 4 23 /32” 17 7 /32” x 4 7 /32” 1 15 /32”<br />
1"<br />
12-27/32" X 4-3/8"<br />
CUT OUT<br />
MAX2/A-94<br />
MAX1 Overall (A) Cut Out (B)<br />
MAX1/A 4 25 /32” x 2 13 /16” 4 5 /6” x 2 5 /16”<br />
MAX1/B 13 7 /8” x 2 13 /16” 13 11 /32” x 2 11 /32”<br />
MAX1/C 27 5 /8” x 2 13 /16” 27 7 /32” x 2 11 /32”<br />
13/16"<br />
(A)<br />
(B) CUT OUT<br />
(C)<br />
WIRe & CABLe MANAGeMeNT
2-25/32"<br />
2-11/16"<br />
WIRe & CABLe MANAGeMeNT<br />
Stainless Steel TM Series<br />
6” & 8” in 3” depth<br />
With this expansion to our already extensive line<br />
of trash liners, we now have virtually every job cov-<br />
ered. With the growing dem<strong>and</strong> for a deeper drop on<br />
the liner, we have extended our line to include a 3”<br />
depth on all sizes of our Stainless Steel TM series. Our<br />
6” diameter trash grommets are available in plastic in a<br />
1” depth, <strong>and</strong> all larger sizes are available in Polished or<br />
Satin Stainless Steel. Our trash liners are a perfect way<br />
to protect the inner core of your counter <strong>and</strong> can easily<br />
be removed for cleaning. Ideal for inspection ports<br />
in garage doors, food waste holes in restaurants, <strong>and</strong><br />
power cord grommets for large jobs. Our larger stain-<br />
less steel options meet local codes for restaurant <strong>and</strong><br />
public rest room facilities. Other custom sizes available.<br />
35-1/32"<br />
34-1/2"<br />
O.C.<br />
35-1/32"<br />
3-3/8"<br />
HORIZONTAL<br />
3-7/16"<br />
BELOW SURFACE<br />
Call for details.<br />
WM28<br />
Designed by: William Lawrence of Anna, TX<br />
2008 Design <strong>Co</strong>ntest Winner<br />
Simply press down on either side to insert the<br />
cabling, then let go <strong>and</strong> the wires are held<br />
securely in place. A simple, cost-effective,<br />
<strong>and</strong> versatile wire manager. These clips<br />
can be used individually or in groups to form a<br />
path for routing <strong>and</strong> organizing wires.<br />
Can be easily mounted with double sided<br />
tape or screwed into the surface for a more<br />
permanent application.<br />
<strong>Co</strong>lor: Black<br />
TM Depth 6” Dia. 8” Dia. 10” Dia. 12” Dia.<br />
1” TM1 TM2 TM10 TM12<br />
2” TM1B TM2B - -<br />
3” TM1C TM2C TM10B TM12B*<br />
6” TM1A - - -<br />
* Special order, allow 6 to 8 week lead time.<br />
WM27<br />
Designed by: Scott Sikkema, Gr<strong>and</strong> Rapids, MI<br />
This track system wire manager incorporates individual<br />
vertebrae-like links into a traditional continuous<br />
channel. Mounts horizontally behind a desk or<br />
below the surface. Before the mounting end caps<br />
are attached, the individual L-shaped brackets can<br />
slide in <strong>and</strong> out of the track <strong>and</strong> interlink to one another.<br />
Use as many or as few of the brackets as you<br />
need on a single track, or join additional tracks to extend<br />
the connection. Brackets can be mounted onto<br />
the track in two ways, one extending horizontally<br />
<strong>and</strong> the other extending below the work surface,<br />
depending on the job <strong>and</strong> the space allotted behind<br />
the work surface. Large enough to run heavy duty<br />
cabling or multiple wires. End pieces screw into the<br />
surface area to mount. To add or remove brackets,<br />
simply unscrew the end caps from the surface.<br />
Finish: Aluminum track with Black brackets.<br />
www.mockett.com 800.523.1269<br />
14<br />
2"<br />
1-7/8"<br />
15/16"
2010 Racing Recap – Two Fabulous Finishes, One Not So Hot...<br />
Chihuahua express<br />
A wonderful three day event that starts<br />
<strong>and</strong> ends daily in Chihuahua, so you sleep<br />
in the same hotel bed nightly! Plus, in<br />
1100 miles it has 350 miles of speed<br />
stages, so good value.<br />
First day the route goes northwest to<br />
the logging town of Madera, second day<br />
due west to the rim of the <strong>Co</strong>pper Canyon,<br />
third day northeast to the Rio Gr<strong>and</strong>e<br />
River <strong>and</strong> the border with the USA.<br />
We qualified first in the Carrera car<br />
class, <strong>and</strong> basically, smoked ‘em Day One.<br />
Unfortunately, the event was marred by a<br />
racing crash on a speed section that took<br />
the life of the navigator.<br />
Day Two was the same. Angelica’s brilliant<br />
navigating was as good as it gets,<br />
<strong>and</strong> we smoked ‘em again. But an awful,<br />
tragic day. Two cars were street racing<br />
on the way back, touching side by side at<br />
150mph+, <strong>and</strong> that was that. Two were<br />
killed, including a good friend of mine,<br />
Nanan Solana.<br />
The Third Day was, mercifully,<br />
cancelled.<br />
I’ve been doing this madness for a<br />
long, long time. Trust me, you never<br />
get used to a racing accident that ends<br />
in a fatality, especially of a good friend.<br />
Never...<br />
Pikes Peak Hill Climb<br />
Second oldest racing event in the USA<br />
(after the Indy 500) <strong>and</strong> a classic hill climb:<br />
12 1/2 miles with a 4800 ft. elevation gain,<br />
from the start line at 9300 ft. to the summit<br />
at 14,110 ft., partially paved <strong>and</strong> partially dirt,<br />
<strong>and</strong> 156 challenging turns. And yes, some<br />
dreadful cliffs... not for the faint of heart!<br />
Angelica navigated us to Pole Position in<br />
the Vintage class. We started first of some<br />
100 cars <strong>and</strong> I’m glad we did – we had a<br />
smooth road. A little light rain overnight had<br />
made the dirt just right.<br />
When you’re doing it the drive is over in an<br />
instant <strong>and</strong> it takes forever. Yes, that feeling.<br />
We waited for the others in our class. Woo<br />
hoo! We won, <strong>and</strong> set a new course record,<br />
13 minutes, 5 seconds, nearly a full minute<br />
ahead of the old record. Our 1954 Olds --<br />
albeit with 630hp – was faster than a full<br />
50% of the modern cars!<br />
But the best was we were awarded<br />
the Race Director’s Trophy <strong>and</strong> were duly<br />
humbled by the award.<br />
M<br />
Get the free mobile app for your phone<br />
http:/ / gettag.mobi<br />
M<br />
Get the free mobile app for your phone<br />
Get the free mobile app for your phone<br />
Carrera Panamericana<br />
If Pikes Peak was the high of 2010,<br />
Carrera was the low.<br />
This annual 2300 mile, 7-day drive from<br />
southern to northern Mexico traces largely<br />
the original road that connected Mexico to<br />
the USA <strong>and</strong> to Central America. From 1950<br />
to 1954 the Mexican government sponsored<br />
a race to promote the Panamerican Highway.<br />
In 1988 Eduardo Leon revived it as a<br />
rally, <strong>and</strong> here we are.<br />
After qualifying 9th of 118 cars, our race<br />
ended before it began. I still don’t believe<br />
it, but the driveshaft sheared as we were<br />
leisurely cruising from the hotel to the<br />
starting line. The race began without us. We<br />
got towed 200 miles (<strong>and</strong> $800!) to our<br />
service truck, they changed the driveshaft in<br />
a few minutes. But we lost all of Day One.<br />
Days Two, Three, Four, Five <strong>and</strong> Seven we<br />
finished 3rd behind two ringers – eventual<br />
winner Harri Rovenpera, a former big time<br />
rally driver from Finl<strong>and</strong>, <strong>and</strong> second place<br />
Mexican Michel Jourdain, a former Indy car<br />
star. We even beat Harri on a speed stage!<br />
Which leaves Day 6. Rather than embarrass<br />
myself in print, go to Youtube <strong>and</strong> enter<br />
“Trouble on the Road to Aguascalientes”.<br />
My 12 seconds of fame... enough laughing...<br />
We ended up 27th overall <strong>and</strong> 10th in<br />
class. Not bad, I suppose, for missing all of<br />
Day One.<br />
http:/ / gettag.mobi<br />
www.mockett.com http:/ / gettag.mobi<br />
15<br />
800.523.1269<br />
2 0 1 0 R A C I N G R e C A P
DRAWeR PuLLS, KNOBS & DOOR HANDLeS<br />
1-25/32" X<br />
4-5/16"<br />
1/2"<br />
4-11/16" X 2-3/4"<br />
19/32"<br />
DP152C<br />
5-1/2” X 2-3/4"<br />
21/32"<br />
DP152A<br />
Designed by: Adam Laws<br />
Similar to our other hinged pulls,<br />
but mounted vertically with a longer h<strong>and</strong>le.<br />
Simply press the top to access the hidden<br />
hinged pull. Closes flush against<br />
a rubber support when not in use.<br />
Finishes: Satin Nickel.<br />
Polished Chrome by special order.<br />
DP152B-17S - Satin Nickel<br />
DP152B<br />
Designed by: Adam Laws<br />
Similar to our DP152 (see pg. 128 in Catalog 22),<br />
but with a much larger profile <strong>and</strong><br />
mounted horizontally. The hinged pull<br />
opens outwards with a very generous<br />
opening for an excellent grip surface.<br />
Finish: Satin Nickel.<br />
DP152C & DP152D<br />
Designed by: Adam Laws<br />
These pulls look very similar to DP152A<br />
& DP152B, but offer a spring loaded<br />
feature. Rather than pushing in at the top<br />
to have the hinged pull open at the bottom,<br />
simply push the top <strong>and</strong> grab the inside of<br />
the frame. When not in use, the spring<br />
loaded door shuts inward flush against<br />
DP152D<br />
the exterior.<br />
Finishes: Satin Nickel.<br />
Polished Chrome by special order.<br />
DP152A-17S - Satin Nickel<br />
4-13/32” X 2-3/4”<br />
www.mockett.com 800.523.1269<br />
16<br />
1/2"<br />
DP152C-17S - Satin Nickel<br />
DP152D-17S - Satin Nickel
DP175 Series<br />
Designed by: Designit<br />
A slim-line look with a long <strong>and</strong><br />
slender body, the flat-faced bar<br />
design <strong>and</strong> sturdy posts give it a bold,<br />
yet sleek identity. Note the smallest<br />
version has only a single post.<br />
Finishes: Satin Nickel.<br />
Polished Chrome by special order.<br />
DP176A-17S - Satin Nickel<br />
DP174A-17S - Satin Nickel<br />
DP174B-26 - Polished Chrome<br />
DP174C-17S - Satin Nickel<br />
DP175 A B<br />
DP175A 3 15/16” 1 1/4”<br />
DP175B 10 1/4” 6 5/16” - 7 9/16”<br />
DP175C 15 3/4” 12 19/32”<br />
DP176B-17S - Satin Nickel<br />
31/32"<br />
1-13/32”<br />
(A)<br />
(B) O.C.<br />
1-3/16"<br />
1-15/32"<br />
(A)<br />
(B) O.C.<br />
5/16"<br />
DP174 Series<br />
Long, flat, <strong>and</strong> elegant, the<br />
DP174 offers a clean <strong>and</strong> simple solution<br />
for any large drawer surface. Though the<br />
angle of the Aluminum extrusion itself<br />
already allows for an easy grasp, it features<br />
a recessed finger grip for added<br />
leverage. To be mounted on the face of<br />
the drawer for a bold, contemporary look.<br />
Finishes: Satin Nickel &<br />
Polished Chrome.<br />
DP174 A B<br />
DP174A 10 1/32” 7 9/16”<br />
DP174B 15 3/32” 12 19/32”<br />
DP174C 20 1/8” 17 5/8”<br />
DP175B-17S - Satin Nickel<br />
DP176 Series<br />
DP175C-17S - Satin Nickel<br />
DP175A-17S - Satin Nickel<br />
This super sleek h<strong>and</strong>le is<br />
extremely thin. Mounts flat against<br />
the surface <strong>and</strong> projects straight out.<br />
In spite of its generous overall size, it<br />
manages to keep a very low profile.<br />
Finish: Satin Nickel.<br />
DP176 A B<br />
DP176A 7 7/8” 7 9/16”<br />
DP176B 12 29/32” 12 19/32”<br />
www.mockett.com 800.523.1269<br />
17<br />
(A)<br />
(B) O.C.<br />
5/8"<br />
DRAWeR PuLLS, KNOBS & DOOR HANDLeS
DRAWeR PuLLS, KNOBS & DOOR HANDLeS<br />
1-9/16"<br />
1-17/32"<br />
(A)<br />
(B) O.C.<br />
(A)<br />
(B) O.C.<br />
9/32"<br />
DP177 Series<br />
Similar to the DP176,<br />
but a slightly different grip<br />
opening <strong>and</strong> a much denser<br />
metal composition. Intended for<br />
more heavy duty applications.<br />
Finishes: Satin Nickel.<br />
Polished Chrome by special order.<br />
DP177 A B<br />
DP177A 7 7/8” 7 9/16”<br />
DP177B 12 29/32” 12 19/32”<br />
DP179 Series<br />
Designed by: Adam Laws<br />
Bow pull with a unique feel<br />
as the rounded arch top<br />
converges into an angled point<br />
<strong>and</strong> adds a contemporary<br />
edge to a traditionally<br />
rounded top. Sweeping<br />
elliptical shape allows for<br />
easy grip.<br />
Finishes: Satin Nickel.<br />
Polished Chrome by special order.<br />
DP179 A B<br />
DP179A 8 17/32” 7 9/16”<br />
DP179B 14 3/8” 12 19/32”<br />
DP178B-17S - Satin Nickel<br />
DP178A-26 - Polished Chrome<br />
(Special Order)<br />
DP177B-26 - Polished Chrome<br />
(Special Order)<br />
DP178 Series<br />
Designed by: Hans S<strong>and</strong>gren<br />
Our “longbow” design takes<br />
an ordinary bow pull <strong>and</strong><br />
encloses the design with a<br />
back support piece. Sharp<br />
edges <strong>and</strong> a clean arcing top<br />
piece; a surefire hit on<br />
any furniture piece.<br />
Finishes: Satin Nickel.<br />
Polished Chrome by special order.<br />
DP178 A B<br />
DP178A 7 11/16” 6 5/16”<br />
DP178B 14 13/16” 12 19/32”<br />
DP179B-17S - Satin Nickel<br />
DP179A-26 - Polished Chrome<br />
(Special Order)<br />
www.mockett.com 800.523.1269<br />
18<br />
DP177A-17S - Satin Nickel<br />
1-1/2"<br />
(A)<br />
(B) O.C.<br />
13/32"
DP180B-17S - Satin Nickel<br />
1"<br />
(A)<br />
(B) O.C.<br />
DP182B-17S - Satin Nickel<br />
1-25/32"<br />
DP180A-26 - Polished Chrome<br />
(Special Order)<br />
DP182A-17S - Satin Nickel<br />
DP181 Series<br />
Designed by: Danny Falch<br />
Large scoop pull reminiscent<br />
of classic car trimmings. Massive<br />
cutout area underneath for<br />
exceptional grip <strong>and</strong><br />
lightweight composition.<br />
Finishes: Satin Nickel.<br />
Polished Chrome<br />
by special order.<br />
DP181 A B<br />
DP181A 4 11/16” 3 25/32”<br />
DP181B 7 7/32” 6 5/16”<br />
DP182 Series<br />
DP180 Series<br />
Designed by: Adam Laws<br />
Graceful arc pull with ultra<br />
sharp edges for a stunningly<br />
sleek <strong>and</strong> modern look.<br />
Finishes: Satin Nickel.<br />
Polished Chrome<br />
by special order.<br />
DP180 A B<br />
DP180A 8 11/16” 6 5/16”<br />
DP180B 15 7/8” 10 3/32”<br />
Designed by: Adam Laws<br />
Resembling a bottle opener<br />
<strong>and</strong> angled downward for an<br />
easy knuckle grip, this versatile<br />
pull is great for contemporary<br />
or traditional furniture.<br />
Finishes: Satin Nickel.<br />
Polished Chrome by special order.<br />
DP182 A B<br />
DP182A 1 31/32” 1 21/32”<br />
DP182B 5 11/32” 5 1/32”<br />
1-3/16"<br />
DP181A-17S - Satin Nickel<br />
DP181B-17S - Satin Nickel<br />
1-3/16"<br />
www.mockett.com 800.523.1269<br />
19<br />
(A)<br />
(B) O.C.<br />
(A)<br />
(B) O.C.<br />
1-11/16"<br />
DRAWeR PuLLS, KNOBS & DOOR HANDLeS
1-9/32"<br />
DRAWeR PuLLS, KNOBS & DOOR HANDLeS<br />
7/8"<br />
(A)<br />
(B) O.C.<br />
5-15/32"<br />
19/32"<br />
2-1/8"<br />
DP183 Series<br />
Designed by: Designit<br />
Bar pull design enclosed<br />
on all sides with hollowed<br />
grip opening. Clean <strong>and</strong><br />
sophisticated look is well<br />
suited for all surfaces.<br />
Sturdy enough for any<br />
heavy-duty application.<br />
Finishes: Satin Nickel.<br />
Polished Chrome by special order.<br />
DP183 A B<br />
DP183A 4 1/8” 3 25/32”<br />
DP183B 7 29/32” 7 9/16”<br />
DP184-17S - Satin Nickel<br />
DP183B-17S - Satin Nickel<br />
DP184<br />
DP185<br />
Designed by: Danny Falch<br />
Rectangular box pull sits<br />
above the surface with<br />
inset finger grips. A prominent<br />
projection with sharp, rigid lines.<br />
Think inside the box!<br />
Finishes: Satin Nickel.<br />
Polished Chrome by special order.<br />
Designed by: Neuhaus Design<br />
A box version of the DP176 <strong>and</strong> DP177.<br />
Rather than keeping with the modest<br />
profile, these bold pieces take center stage.<br />
The hollowed surface area allows for an<br />
enormous grip. Mounted flat onto the<br />
surface projecting outward in a<br />
very clean fashion.<br />
Finish: Satin Nickel.<br />
DP185-17S - Satin Nickel<br />
DP183A-26 - Polished Chrome<br />
(Special Order)<br />
1-15/32"<br />
www.mockett.com 800.523.1269<br />
20<br />
6-5/8"<br />
1-3/16"
DP186-17S - Satin Nickel<br />
1-1/4"<br />
6-25/32"<br />
DP188-26M - Matte Chrome<br />
(Special Order)<br />
2-1/32"<br />
DP187<br />
Designed by: Danny Falch<br />
A distinct bend at the center<br />
of the pull presents a solid<br />
h<strong>and</strong>grip <strong>and</strong> an interesting<br />
profile. Can be mounted<br />
to face up or down.<br />
Finishes: Satin Nickel.<br />
DP186-26 - Polished Chrome<br />
(Special Order)<br />
Polished Chrome<br />
by special order.<br />
DP188-17S - Satin Nickel<br />
DP188-26 - Polished Chrome<br />
(Special Order)<br />
DP186<br />
Designed by: Danny Falch<br />
Elongated rectangular<br />
“picture frame” pull<br />
st<strong>and</strong>s off the surface<br />
with posts on either side.<br />
Smooth, subtly rounded<br />
31/32"<br />
edges create a soft <strong>and</strong><br />
alluring look.<br />
Finishes: Satin Nickel.<br />
Polished Chrome by special order.<br />
DP188<br />
Designed by: Neuhaus Design<br />
Sleek <strong>and</strong> lightweight,<br />
these pulls project outwards<br />
from the surface with fast<br />
rounded edges <strong>and</strong> smooth<br />
lines. A serious look with<br />
a sophisticated edge.<br />
Finishes: Satin Nickel.<br />
Polished Chrome &<br />
Matte Chrome<br />
by special order.<br />
DP187-26 - Polished Chrome<br />
(Special Order)<br />
1-1/16"<br />
www.mockett.com 800.523.1269<br />
21<br />
5-19/32"<br />
2-9/32"<br />
DP187-17S - Satin Nickel<br />
6-5/8" 31/32"<br />
DRAWeR PuLLS, KNOBS & DOOR HANDLeS
DRAWeR PuLLS, KNOBS & DOOR HANDLeS<br />
1-9/32"<br />
7-3/16"<br />
1-3/8"<br />
DP189<br />
Designed by: Neuhaus Design<br />
Rectangular pull with a<br />
flat face <strong>and</strong> smooth,<br />
subtly rounded edges for a<br />
panoramic view. Hollowed<br />
center for top or bottom<br />
grip, or grasp the entire<br />
h<strong>and</strong>le for heavier drawers.<br />
Finishes: Satin Nickel.<br />
Polished Chrome<br />
by special order.<br />
DP190-17S - Satin Nickel<br />
DP190-26M - Matte Chrome<br />
(Special Order)<br />
DP190-26 - Polished Chrome<br />
(Special Order)<br />
DP190<br />
DP189-17S - Satin Nickel<br />
Designed by: Neuhaus Design<br />
Elegantly arced clasp design.<br />
Hollowed rectangular center for<br />
optimal grip <strong>and</strong> leverage.<br />
Finishes: Satin Nickel.<br />
Matte Chrome <strong>and</strong><br />
Polished Chrome<br />
by special order.<br />
www.mockett.com 800.523.1269<br />
22<br />
DP189-26 - Polished Chrome<br />
(Special Order)<br />
1-3/8"<br />
7-1/8"<br />
1-3/8"
15/16"<br />
DP194A-17S - Satin Nickel<br />
DP191-17S - Satin Nickel<br />
2-9/16" DIA.<br />
DP193-17S - Satin Nickel<br />
DP191<br />
Designed by: Adam Laws<br />
Picture frame pull sits above the<br />
surface with gentle inward-arching<br />
sides to create depth. Smooth<br />
rounded edges for easy grip.<br />
Finishes: Satin Nickel.<br />
Polished Chrome<br />
by special order.<br />
DP192<br />
Designed by: Adam Laws<br />
Resembling a radio horn,<br />
this conical shaped design<br />
is both fanciful <strong>and</strong> functional.<br />
A smooth edge for varying<br />
grips <strong>and</strong> ease of use.<br />
Finishes: Satin Nickel.<br />
Polished Chrome<br />
by special order.<br />
DP193<br />
DP194B-17S - Satin Nickel<br />
Designed by: Hans S<strong>and</strong>gren<br />
A concave bowl shape design<br />
gives this pull an interesting feel<br />
<strong>and</strong> grip as well as a unique identity<br />
all its own. A bold statement on<br />
the face of any drawer or cabinet.<br />
Finishes: Satin Nickel.<br />
Polished Chrome<br />
by special order.<br />
DP194 Series<br />
1-1/2" SQ.<br />
15/16"<br />
DP192-17S - Satin Nickel<br />
25/32"<br />
Designed by: Adam Laws<br />
Flap design with invisible<br />
hinges perfect for a concealed<br />
look. Simply press the<br />
top to expose the pull.<br />
Cylindrical inset for<br />
recessed mounting.<br />
Finishes: Satin Nickel.<br />
Polished Chrome<br />
by special order.<br />
DP194 A B<br />
DP194A 2 1/32” 1 11/16”<br />
DP194B 3 5/32” 2 25/32”<br />
(B) CUT OUT<br />
2-11/32" SQ.<br />
www.mockett.com 800.523.1269<br />
23<br />
17/32"<br />
2-9/16"<br />
DIA.<br />
(A)<br />
DIA.<br />
DRAWeR PuLLS, KNOBS & DOOR HANDLeS
DRAWeR PuLLS, KNOBS & DOOR HANDLeS<br />
2-21/32" DIA.<br />
CUT OUT<br />
19/32"<br />
31/32"<br />
1/2"<br />
31/32"<br />
1-9/16"<br />
2-27/32"<br />
DIA.<br />
3-15/16"<br />
5/8"<br />
DP195<br />
Designed by: Hans S<strong>and</strong>gren<br />
Our “belt buckle” pull has a<br />
bowl shaped cavity with a raised<br />
grab bar inset across the middle.<br />
Recessed mounting with rigid<br />
grooves on the cylindrical base.<br />
3/4" SQ.<br />
Simply glue in place.<br />
Finishes: Satin Nickel.<br />
Polished Chrome<br />
by special order.<br />
DP196<br />
DP197<br />
Small fingergrip pull with<br />
protruding edge piece<br />
for added leverage. Ideal for<br />
that perfect accent<br />
on smaller drawers.<br />
Or use as a coat hook!<br />
Finish: Satin Stainless Steel.<br />
DP198<br />
Designed by: Designit<br />
A glass pull floating atop<br />
a single Satin Nickel base.<br />
Mushroom shaped pull with a smooth, flat<br />
top great for use as a pull or a coathook.<br />
Small <strong>and</strong> easy with a great fingergrip.<br />
Finish: Satin Stainless Steel.<br />
A striking contrast.<br />
Finish: Satin Nickel<br />
with glass.<br />
DP195-17S - Satin Nickel<br />
19/32"DIA.<br />
DP198-17S - Satin Nickel<br />
www.mockett.com 800.523.1269<br />
24<br />
1"<br />
1-5/32"<br />
DIA.
1-1/8"<br />
8-31/32" 31/32"<br />
DP199-26 - Polished Chrome<br />
DP200<br />
The sculptural relief ingrained<br />
on the broad face of this pull<br />
conveys a soothing sense of<br />
continuous motion. A beautiful<br />
<strong>and</strong> complementary finishing<br />
touch to a classic design.<br />
Finishes: Satin Nickel.<br />
Polished Chrome<br />
by special order.<br />
1-21/32"<br />
(A)<br />
(B) O.C.<br />
DP199<br />
Two Polished Chrome finished<br />
bases grasp a radiant glass<br />
top on either side, creating a<br />
dazzling contrast. A stylish<br />
<strong>and</strong> versatile pull that makes<br />
a statement virtually anywhere.<br />
Finish: Polished Chrome.<br />
DP200-17S - Satin Nickel<br />
DP200-26 - Polished Chrome<br />
(Special Order)<br />
DP105/3<br />
New Sizes<br />
Our selection of stylish DP105<br />
pulls continues to grow yet again!<br />
With a variety of sizes already<br />
available in stainless steel <strong>and</strong><br />
chrome <strong>and</strong> nickel plated options,<br />
we experienced a growing dem<strong>and</strong><br />
for these sleek <strong>and</strong> modern<br />
pulls, <strong>and</strong> we answered with the<br />
introduction of four new sizes in<br />
Satin Stainless Steel. Available<br />
with a 9/16” square profile. See<br />
www.mockett.com/DP105<br />
for full list of sizes.<br />
Finish: Satin Stainless Steel.<br />
www.mockett.com 800.523.1269<br />
25<br />
9/16"<br />
1-3/8"<br />
7-15/16"<br />
DP105 A B<br />
DP105AA/3 6 27/32” 6 15/16”<br />
DP105AB/3 9 3/8” 8 13/16”<br />
DP105C/3 18 3/16” 17 5/8”<br />
DP105D/3 20 23/32” 20 5/32”<br />
1-3/16"<br />
DRAWeR PuLLS, KNOBS & DOOR HANDLeS
SuPPORTS<br />
MPB12 Series<br />
Our largest st<strong>and</strong>-off yet! MPB12 has a beefy 2”<br />
diameter <strong>and</strong> is available in five lengths. Ideal for<br />
heavy duty applications or just a heavy duty look.<br />
Extremely durable <strong>and</strong> versatile. Perfect for signage,<br />
display panels, or adding a shelf above a desk.<br />
These multi-purpose support hangers are right up<br />
your creative alley! Made of aluminum <strong>and</strong> then<br />
anodized. Available in 1”, 2”, 3”, 4” <strong>and</strong> 6” lengths.<br />
MPB12/CAP2<br />
Finish: Satin Aluminum.<br />
Please see chart on page 28.<br />
MPB12 with Low Profile Cap<br />
MPB11/CAP2 MPB10/CAP2 MPB9/CAP2<br />
6” 4” 3” 2”<br />
MPB12/CAP1<br />
Traditional Style<br />
MPB/CAP2<br />
Low Profile Caps<br />
All your MPBs come with the traditional cap,<br />
above. Now many of our multi-purpose support<br />
hangers are available with a sleek low<br />
profile cap. Great for shelves <strong>and</strong> countertops,<br />
these new caps not only sit closer to the<br />
surface for a cleaner look, but they are also<br />
less obtrusive to the overall design. While<br />
our beautiful st<strong>and</strong> off systems tend to attract<br />
the eye naturally, sometimes it’s nice to have<br />
the option to let them take a back seat to the<br />
display itself. These low profile caps are the<br />
perfect solution, opening up even more options<br />
to your endless display ideas.<br />
All sizes have a ½” diameter by ¼” height<br />
mounting stem. Minimum glass/acrylic<br />
thickness is ¼”.<br />
Finish: Satin Aluminum.<br />
MPB/CAP2 A<br />
MPB9/CAP2 1”<br />
MPB10/CAP2 1 1/4”<br />
MPB11/CAP2 1 1/2”<br />
MPB12/CAP2 2”<br />
www.mockett.com 800.523.1269<br />
26<br />
17/32" DIA.<br />
CUT OUT<br />
3/8"<br />
1/4"<br />
1”<br />
(A) DIA.
3/4”<br />
1”<br />
MPB6.5-SSS<br />
1/2”<br />
APG Series – Panel Grips<br />
No longer any need to support<br />
panels in each corner, APGs can<br />
be mounted anywhere along panel<br />
length. Just screw outer barrel to<br />
wall. Mount display panel onto inner<br />
barrel; secure panel by tightening<br />
inner barrel allen screw.<br />
Insert inner barrel into outer barrel,<br />
tighten outer barrel allen screw.<br />
Two sizes: Smaller 1” diameter,<br />
holds panels 1/8” to ½” thick.<br />
Larger: 1 ¼” diameter, holds<br />
panels 1/8” to ¾” thick.<br />
Finish: Satin Aluminum.<br />
(A) DIA.<br />
(B)<br />
MPB7.5-SSS<br />
3/4” 1/2”<br />
MPB10-SSS<br />
1-1/2” 1”<br />
(C)<br />
MPB9-SSS<br />
1” 3/4”<br />
MPB/APG A B C<br />
MPB9/APG-94 1” 1 9/16” to 1 15/16” 1/8” to 1/2”<br />
MPB10/APG-94 1 1/4” 1 13/16” to 2 7/16” 1/8” to 3/4”<br />
MPB9/APG-94<br />
MPB Satin Stainless Series<br />
MPB6.5, 7.5, 9, 10 series in SSS<br />
In the tradition of exp<strong>and</strong>ing our line<br />
of multi-purpose st<strong>and</strong>offs, we are now<br />
introducing them in Satin Stainless Steel.<br />
Available from ½” up to 1 ¼” diameter,<br />
these extremely durable pieces are the<br />
perfect solution for your display <strong>and</strong><br />
shelving applications. Ideal for kitchens<br />
or to match existing Stainless Steel appliances,<br />
this option opens up more avenues<br />
with signage <strong>and</strong> display counters.<br />
A unique set screw locks the cap in<br />
place to provide the most secure st<strong>and</strong>off<br />
yet! Available in four diameters <strong>and</strong><br />
varying lengths.<br />
Finish: Satin Stainless Steel.<br />
Please see chart on page 29.<br />
MPB10/APG-94<br />
www.mockett.com 800.523.1269<br />
27<br />
SuPPORTS
SuPPORTS<br />
NeW<br />
CAP!<br />
Ordering is easy as one, two, three... (four <strong>and</strong> five)!<br />
Aluminum St<strong>and</strong>-Offs<br />
Step 1: Specify Cap<br />
Cap Diameter<br />
Step 2: Specify Screw Length. To determine screw length needed add 1 /2" to material thickness.<br />
(Example: material thickness of 1 /4"+ 1 /2"= 3 /4". Therefore, select 3 /4" set screw (MPB-HD-S5). *Moderate upcharge.<br />
Screw Length<br />
<strong>Co</strong>mponent<br />
MPB6<br />
3 /8" dia.<br />
(10-24 thread)<br />
MPB7<br />
5 /8" dia.<br />
( 5 /16 -18 thread)<br />
Step 3: Specify Barrel Height. This is how far off the surface you want your “st<strong>and</strong> off" to be.<br />
* Through hole drilled, please contact us to specify mounting hardware on this length. †Recommended for use on a horizontal surface only.<br />
Barrel Height<br />
Step 4: Select Options. See below.<br />
MPB8<br />
7 /8" dia.<br />
( 5 /16 -18 thread)<br />
MPB9<br />
1" dia.<br />
( 5 /16 -18 thread)<br />
MPB10<br />
1 1 /4" dia.<br />
( 5 /16 -18 thread)<br />
MPB11<br />
1 1 /2" dia.<br />
( 5 /16 -18 thread)<br />
MPB12<br />
2” dia.<br />
( 5 /16 -18 thread)<br />
www.mockett.com 800.523.1269<br />
28<br />
MPB/SQ<br />
1" square<br />
( 5 /16 -18 thread)<br />
1 /4" HEIGHT MPB6/CAP1-94 – – – – – – –<br />
5 /16" HEIGHT – MPB7/CAP1-94 – – – – – –<br />
3 /8" HEIGHT – – MPB8/CAP1-94 MPB9/CAP1-94 – – – MPB/SQ1/CAP1-94<br />
1 /2" HEIGHT – – – – MPB10/CAP1-94 MPB11/CAP1-94 – –<br />
5 /8” HEIGHT – – – – – – MPB12/CAP1-94 –<br />
Minimum material thickness for the stem of these caps is 1/4”, pre-drill 1/2” hole size<br />
1 /8” Low Profile – – – MPB9/CAP2-94 MPB10/CAP2-94 MPB11/CAP2-94 MPB12/CAP2-94 –<br />
1 /4" LENGTH MPB-HD-S2 – – – – – –<br />
1 /2" LENGTH MPB-HD-S3 MPB-HD-S16 MPB-HD-S16 MPB-HD-S16 MPB-HD-S16 MPB-HD-S16 MPB-HD-S16 MPB-HD-S16<br />
5 /8" LENGTH MPB-HD-S4 – – – – – – –<br />
3 /4" LENGTH MPB-HD-S5 MPB-HD-S18 MPB-HD-S18 MPB-HD-S18 MPB-HD-S18 MPB-HD-S18 MPB-HD-S18 MPB-HD-S18<br />
7 /8" LENGTH MPB-HD-S6 – – – – – – –<br />
1" LENGTH MPB-HD-S7 MPB-HD-S20 MPB-HD-S20 MPB-HD-S20 MPB-HD-S20 MPB-HD-S20 MPB-HD-S20 MPB-HD-S20<br />
1 1 /4" LENGTH MPB-HD-S8 MPB-HD-S21 MPB-HD-S21 MPB-HD-S21 MPB-HD-S21 MPB-HD-S21 MPB-HD-S21 MPB-HD-S21<br />
1 1 /2" LENGTH – MPB-HD-S22 MPB-HD-S22 MPB-HD-S22 MPB-HD-S22 MPB-HD-S22 MPB-HD-S22 MPB-HD-S22<br />
1 3 /4" LENGTH – MPB-HD-S23* MPB-HD-S23* MPB-HD-S23* MPB-HD-S23* MPB-HD-S23* MPB-HD-S23* MPB-HD-S23*<br />
2" LENGTH – MPB-HD-S24* MPB-HD-S24* MPB-HD-S24* MPB-HD-S24* MPB-HD-S24* MPB-HD-S24* MPB-HD-S24*<br />
1 /4" HEIGHT MPB6/.25-94* – – – MPB10/.25-94* – – –<br />
1 /2" HEIGHT MPB6/.5-94* MPB7/.5-94* – MPB9/.5-94* – – – –<br />
5 /8" HEIGHT – – – – MPB10/.625-94* – – –<br />
3 /4" HEIGHT – MPB7/.75-94* – – – – – –<br />
7 /8" HEIGHT – – MPB8/.875-94* – – – – –<br />
1" HEIGHT MPB6/1-94* MPB7/1-94* – MPB9/1-94* MPB10/1-94* MPB11/1-94* MPB12/1-94* MPB/SQ1/1-94*<br />
1 1 /2" HEIGHT – MPB7/1.5-94 – – – – – –<br />
2" HEIGHT – MPB7/2-94 – MPB9/2-94 MPB10/2-94 MPB11/2-94 MPB12/2-94 MPB/SQ1/2-94*<br />
3" HEIGHT – MPB7/3-94 – MPB9/3-94 MPB10/3-94 MPB11/3-94 MPB12/3-94 –<br />
4" HEIGHT – – – MPB9/4-94 MPB10/4-94 MPB11/4-94 MPB12/4-94 † –<br />
6" HEIGHT – – – – MPB10/6-94 † – MPB12/6-94 † –<br />
8" HEIGHT – – – – MPB10/8-942 † – – –<br />
10" HEIGHT – – – – MPB10/10-94 † – – –<br />
12" HEIGHT – – – – MPB10/12-94 † – – –<br />
1 /8" x 1 1 /4" or<br />
1 1 /2" dia. – – – –<br />
1 /4" x 1 1 /4" or<br />
1 1 /2" dia. – – – –<br />
3 /8" x 1 1 /4" or<br />
1 1 /2" dia. – – – –<br />
1 /2" x 1 1 /4" or<br />
1 1 /2" dia. – – – –<br />
MPB10/<br />
HB/125-94<br />
MPB10/<br />
HB/250-94<br />
MPB10/<br />
HB/375-94<br />
MPB10/<br />
HB/500-94<br />
MPB11/<br />
HB/125-94<br />
MPB11/<br />
HB/250-94<br />
MPB11/<br />
HB/375-94<br />
MPB11/<br />
HB/500-94<br />
NeW<br />
SIZe!<br />
– –<br />
– –<br />
– –<br />
– –
Step 5: Specify Mounting Hardware.<br />
a) Hangar Bolts<br />
b) <strong>Co</strong>ncrete Anchor<br />
c) Drywall<br />
<strong>Co</strong>mponent<br />
description:<br />
1 1 /2" OA<br />
2 3 /16” OA,<br />
1” machine<br />
2 1 /2" OA,<br />
1" machine<br />
4" OA, 1 7 /8"<br />
machine<br />
<strong>Co</strong>ncrete Anchor<br />
Kit<br />
1 /2" dia.<br />
hole req’d<br />
7 /8" dia.<br />
hole req’d<br />
MPB6<br />
3 /8" dia.<br />
(10-24 thread)<br />
MPB-HD-WHS1<br />
5 /8”machine<br />
MPB6.5<br />
1 /2" dia.<br />
(10-24 thread)<br />
MPB-HD-WHS1<br />
5 /8”machine<br />
MPB7<br />
5 /8" dia.<br />
( 5 /16 -18 thread)<br />
MPB-HD-WHS3<br />
9 /16”machine<br />
MPB7.5<br />
3 /4” dia.<br />
( 1 /4 -20 thread)<br />
–<br />
MPB8<br />
7 /8" dia.<br />
( 5 /16 -18 thread)<br />
MPB-HD-WHS3<br />
9 /16”machine<br />
MPB9<br />
1" dia.<br />
( 5 /16 -18 thread)<br />
MPB-HD-WHS3<br />
9 /16”machine<br />
MPB10<br />
1 1 /4" dia.<br />
( 5 MPB11<br />
1<br />
/16 -18 thread)<br />
1 /2" dia.<br />
( 5 MPB12<br />
2" dia.<br />
/16 -18 thread) ( 5 MPB/SQ<br />
1" square<br />
/16 -18 thread) ( 5 /16-18 thread)<br />
MPB-HD-WHS3<br />
9 /16”machine<br />
MPB-HD-WHS3<br />
9 /16”machine<br />
MPB-HD-WHS3<br />
9 /16”machine<br />
– – – MPB-HD-WHS2 – – – – – –<br />
– – MPB-HD-WHS4 – MPB-HD-WHS5 MPB-HD-WHS4 MPB-HD-WHS4 MPB-HD-WHS4 MPB-HD-WHS4 –<br />
– – MPB-HD-WHS5 – MPB-HD-WHS5 MPB-HD-WHS5 MPB-HD-WHS5 MPB-HD-WHS5 –<br />
MPB-HD-WHS3<br />
9 /16”machine<br />
– – MPB-HD-CON – MPB-HD-CON MPB-HD-CON MPB-HD-CON MPB-HD-CON MPB-HD-CON MPB-HD-CON<br />
– – MPB-HD-TWA2 – MPB-HD-TWA2 MPB-HD-TWA2 – – – –<br />
– – – – – MPB-HD-TWA1 MPB-HD-TWA1 MPB-HD-TWA1 MPB-HD-TWA1 MPB-HD-TWA1<br />
d) Drywall – – – – MPB-HD-ZTOG2 – – – – – –<br />
e) Table Top<br />
1" thick<br />
table tops<br />
1 1 /4" thick<br />
table tops<br />
1 3 /4" thick<br />
table tops<br />
Satin Stainless Steel St<strong>and</strong>-Offs<br />
Step 1A: Specify Cap<br />
Cap Diameter<br />
Stem<br />
Diameter<br />
– – MPB-TT-1.00 – MPB-TT-1.00 MPB-TT-1.00 MPB-TT-1.00 MPB-TT-1.00 MPB-TT-1.00 MPB-TT-1.00<br />
– – MPB-TT-1.25 – MPB-TT-1.25 MPB-TT-1.25 MPB-TT-1.25 MPB-TT-1.25 MPB-TT-1.25 MPB-TT-1.25<br />
– – MPB-TT-1.75 – MPB-TT-1.75 MPB-TT-1.75 MPB-TT-1.75 MPB-TT-1.75 MPB-TT-1.75 MPB-TT-1.75<br />
Step 2A: Specify Screw Length. To determine screw length needed add 1/4" to material thickness.<br />
(Example: material thickness of 1 /4"+ 1 /4"= 1 /2". Therefore, select 1 /2" set screw (MPB-HD-S5). * Moderate upcharge.<br />
Screw Length<br />
Cap Height<br />
3 /16” HEIGHT<br />
Stem<br />
Diameter<br />
(Pre-drill hole size)<br />
Stem<br />
Height<br />
MPB6.5<br />
1 /2" dia.<br />
(10-24 thread)<br />
MPB7.5<br />
3 /4” dia.<br />
( 1 /4 -20 thread)<br />
MPB9<br />
1" dia.<br />
( 5 /16 -18 thread)<br />
Step 3A: Specify Barrel Height. This is how far off the surface you want your “st<strong>and</strong> off” to be.<br />
Barrel Height<br />
NeW!<br />
MPB10<br />
1 1 /4" dia.<br />
( 5 /16 -18 thread)<br />
1 /4” DIA 1 /8” MPB6.5/CAP3-SSS – – –<br />
5 /16” DIA 3 /16” – MPB7.5/CAP3-SSS – –<br />
7 /16” DIA 3 /16” – – MPB9/CAP3-SSS –<br />
7 /16” DIA 3 /16” – – – MPB10/CAP3-SSS<br />
1 /4" LENGTH MPB-HD-S2 MPB-HD-S10 – –<br />
1 /2" LENGTH MPB-HD-S3 – MPB-HD-S16 MPB-HD-S16<br />
5 /8" LENGTH MPB-HD-S4 – – –<br />
3 /4" LENGTH MPB-HD-S5 MPB-HD-S105 MPB-HD-S18 MPB-HD-S18<br />
7 /8" LENGTH MPB-HD-S6 – – –<br />
1" LENGTH MPB-HD-S7 MPB-HD-S11 MPB-HD-S20 MPB-HD-S20<br />
1 1 /4" LENGTH MPB-HD-S8 MPB-HD-S12 MPB-HD-S21 MPB-HD-S21<br />
1 1 /2" LENGTH – MPB-HD-S13 MPB-HD-S22 MPB-HD-S22<br />
1 3 /4" LENGTH – – MPB-HD-S23* MPB-HD-S23*<br />
2" LENGTH – – MPB-HD-S24* MPB-HD-S24*<br />
1 /2" HEIGHT MPB6.5/.5-SSS MPB7.5/.5-SSS – –<br />
3 /4" HEIGHT MPB6.5/.75-SSS MPB7.5/.75-SSS MPB9/.75-SSS –<br />
1” HEIGHT – MPB7.5/1-SSS MPB9/1-SSS MPB10/1-SSS<br />
1 1 /2" HEIGHT – – – MPB10/1.5-SSS<br />
Step 4A: Specify Hardware (See chart on top of this page)<br />
www.mockett.com 800.523.1269<br />
29<br />
SuPPORTS
SuPPORTS<br />
SH40 - O’<strong>Co</strong>nnor Shelf Support<br />
2009 Design <strong>Co</strong>mpetition Winner<br />
John O’<strong>Co</strong>nnor, Griffith, IN<br />
A unique extruded Aluminum design that features<br />
an arched bottom piece connected by several<br />
smaller slats making a harmonious support<br />
structure. This creates added stability from<br />
underneath as well as providing an interesting<br />
<strong>and</strong> pleasant overall aesthetic. It is able to<br />
accommodate shelves up to 10” deep.<br />
Finishes: Satin Aluminum, Black Anodized.<br />
SH41<br />
Polished<br />
Chrome<br />
SH40-90 - Black Anodized<br />
Satin<br />
Nickel<br />
Metallic<br />
Silver<br />
SH41 Series<br />
Bold, elliptical shape that juts out straight from the wall. Top<br />
clamp piece holds shelf in place. Tightens from underneath;<br />
the shelf sits atop the support <strong>and</strong> tightens up to the top<br />
piece. Available in three sizes. Sold in pairs.<br />
SH41A has a weight capacity of 26 lbs.* per pair with a<br />
material thickness ranging from ¼” to 5/8”.<br />
SH41B has a weight capacity of 66 lbs.* per pair <strong>and</strong> holds<br />
material 3/4” to 1 1/2” thick.<br />
SH41C holds up to 88 lbs.* per pair <strong>and</strong> holds material<br />
from 7/8” to 1 7/8” thick.<br />
Finishes: Polished Chrome, Satin Nickel, Metallic Silver.<br />
Note: SH41C-17S requires a 250 pair minimum order.<br />
(A) (B) (C) (D)<br />
SH41A SH41A-26 SH41A-17S SH41A-23 2 3 /32" 1 1 /32" 2 19 /32" 1 /4"- 5 /8"<br />
SH41B SH41B-26 SH41B-17S SH41B-23 3 15 /32" 1 15 /32" 4 25 /32" 3 /4"- 1 1 /2"<br />
SH41C SH41C-26 SH41C-17S SH41C-23 4 3 /32" 1 15 /32" 6" 7 /8"- 1 7 /8"<br />
* When mounted into studs or concrete.<br />
Weight Capacity: 45 lbs.* per bracket.<br />
Maximum shelf depth is 10”.<br />
Satin<br />
Aluminum<br />
Black<br />
Anodized<br />
SH40-94 SH40-90<br />
(D)<br />
(A)<br />
MIN.<br />
MAX.<br />
ADJUSTMENT<br />
SH41A maximum shelf depth is 7 1 /2”. Mount no more than 23 1 /2” apart.<br />
SH41B maximum shelf depth is 9 1 /2”. Mount no more than 35” apart.<br />
SH41C maximum shelf depth is 11”. Mount no more than 39” apart.<br />
www.mockett.com 800.523.1269<br />
30<br />
6"<br />
1"<br />
(C)<br />
(B)<br />
8"
SH35<br />
Polished<br />
Chrome<br />
SH35-90<br />
Matte Black<br />
Metallic<br />
Silver<br />
Satin<br />
Nickel<br />
Matte<br />
Black<br />
(A) (B) (C) (D)<br />
SH35A SH35A-26 SH35A-23 SH35A-17S SH35A-90 1 13 /16" - 2 13 /32" 1 1 /8" 1" 3 /32" - 19 /32"<br />
SH35 SH35-26 SH35-23 SH35-17S SH35-90 2 5 /16" - 3 1 /8" 1 1 /2" 1 5 /16" 3 /32" - 13 /16"<br />
SH36<br />
Weight Capacity: 7 lbs.* per bracket.<br />
SH35 maximum shelf depth is 4”.<br />
SH35A maximum shelf depth is 3”.<br />
Polished<br />
Chrome<br />
Metallic<br />
Silver<br />
Satin<br />
Nickel<br />
Matte<br />
Black<br />
SH36A-17S<br />
Satin Nickel<br />
(A) (B) (C) (D)<br />
SH36A SH36A-26 SH36A-23 SH36A-17S SH36A-90 1 11 /16" - 2 5 /16" 1 7 /32" 1 7 /32" 3 /32"- 5 /8"<br />
SH36 SH36-26 SH36-23 SH36-17S SH36-90 2 5 /32"- 3" 1 9 /16" 1 9 /16" 3 /32"- 7 /8"<br />
Polished<br />
Chrome<br />
Metallic<br />
Silver<br />
Satin<br />
Nickel<br />
Matte<br />
Black<br />
SH37-26 SH37-23 SH37-17S SH37-90<br />
* When mounted into studs or concrete.<br />
Weight Capacity: 15 lbs.* per bracket.<br />
SH36 maximum shelf depth is 4”.<br />
SH36A maximum shelf depth is 3”.<br />
Weight Capacity: 7 lbs.* per bracket.<br />
Maximum shelf depth is 8”.<br />
Back by Popular Dem<strong>and</strong>!<br />
SH35, SH35A, SH36, SH36A & SH37<br />
Our line of smaller shelf supports is now back<br />
by popular dem<strong>and</strong>! Not only did we bring<br />
them back, but we now offer new finishes for<br />
them as well. Introducing Satin Nickel <strong>and</strong><br />
Matte Black. Round, square, <strong>and</strong> L-shaped,<br />
these three designs may look different from<br />
one another, but they all share the same low<br />
profile look <strong>and</strong> the same overwhelming<br />
popularity. Each exp<strong>and</strong>s <strong>and</strong> tightens to the<br />
desired shelf thickness, having a visible top<br />
<strong>and</strong> bottom piece above <strong>and</strong> below the shelf.<br />
Finishes: Polished Chrome, Metallic Silver,<br />
Satin Nickel, Matte Black.<br />
SH35<br />
SH36<br />
SH37<br />
SH37-90<br />
Matte Black<br />
www.mockett.com 800.523.1269<br />
31<br />
(A) MIN.<br />
MAX.<br />
MIN.<br />
(A)<br />
MAX.<br />
4-5/32" MIN.<br />
5-23/32" MAX.<br />
(B)<br />
(B)<br />
3-3/32"<br />
(C)<br />
MIN.<br />
(D)<br />
MAX.<br />
(C)<br />
MIN.<br />
(D)<br />
MAX.<br />
3/16" MIN.<br />
1-7/8" MAX.<br />
1-7/32"<br />
SuPPORTS
SuPPORTS<br />
SWS6A<br />
Smaller version of the SWS6 –<br />
Another Design <strong>Co</strong>mpetition Winner that<br />
has spawned an extension of its original de-<br />
sign! With a growing dem<strong>and</strong> for a smaller<br />
version of the popular SWS6, we are now<br />
introducing our SWS6A Newport counter<br />
support in a shorter overall size. Still using<br />
the same ½” diameter Stainless Steel rod<br />
mounted to a Stainless Steel mounting<br />
plate, but now only 11 19/32” high,<br />
reaching out 11 19/32” from the wall.<br />
SWS6A holds up to 45 lbs.* with L-bracket<br />
(sold separately) for back support.<br />
It accommodates shelves up to 14” deep.<br />
2" X 2"<br />
TOP PLATE<br />
Finishes: Satin Stainless Steel,<br />
(OPTIONAL) BRACKET<br />
Polished Stainless Steel.<br />
1-1/2" 3"<br />
11-19/32"<br />
11-19/32"<br />
* When mounted into studs or concrete with L-bracket.<br />
SWS6A-SSS - Satin Stainless<br />
SWS6A-PSS - Polished Stainless<br />
www.mockett.com 800.523.1269<br />
32
From: John W. Wagonis<br />
Sent: Thursday, October 21, 2010 9:19 AM<br />
To: <strong>Co</strong>okie<br />
Subject: Return<br />
I’m curious, I’m not complaining, but why would you refund<br />
the freight? This is the customer changing their mind. They<br />
caused you the outbound freight expense to ship it, why would<br />
you return that amount to them (me)? It is a non-recoverable<br />
cost for you. It just seems too generous on <strong>Doug</strong> <strong>Mockett</strong>’s<br />
part.<br />
Whether you include it or not for me is your policy <strong>and</strong> how<br />
you do things, I’m am just curious at to why you would.<br />
Later,<br />
John<br />
@<br />
-----Original Message-----<br />
From: <strong>Doug</strong> <strong>Mockett</strong><br />
Sent: Thursday, October 21, 2010 3:54 PM<br />
To: John W. Wagonis<br />
Hi John --<br />
Thank you for your comments.<br />
Our policy may be unusual but makes good sense to us.<br />
We want to assure you have the best possible experience<br />
with us. And if that means bending over backwards in<br />
customer service, it is our pleasure.<br />
We pride ourselves in giving clients world class service,<br />
the best we know how.<br />
This policy is an outgrowth of an LL Bean one. For years,<br />
until recently, they offered to take back any item, any time.<br />
As their biz was largely mail order, it was good insurance to<br />
reap customer loyalty.<br />
On top of that – <strong>and</strong> a polar opposite – we used to have a screw<br />
supplier who tried to charge us a 20% restocking fee – when<br />
they sent the wrong size screws! So they lost a client...<br />
My theory has always been to make dealing with us as easy<br />
as possible.<br />
As a mail order company you are unable to see the product<br />
until you receive it. It may not be exactly what you had in<br />
mind, so why not make it easy to exchange or returns...<br />
Many thanks again,<br />
<strong>Doug</strong><br />
From: Scott Laxton<br />
Sent: Monday, June 14, 2010 4:56 PM<br />
To: Info<br />
Subject: Thank you for your Customer Service<br />
To whom it may concern:<br />
As one of the partners of LL&H Woodworks, I always like these<br />
types of notes for clients <strong>and</strong> customers.<br />
We had a situation with one of your hardware pieces that we<br />
bought from <strong>Doug</strong> <strong>Mockett</strong>. Working with Kelly (ext. 6358),<br />
she was able to h<strong>and</strong>le the situation <strong>and</strong> get me the<br />
replacement h<strong>and</strong>les in a quick manner. It is values that<br />
we look for in Vendors because it is one of the models of<br />
our company. Customer Service.<br />
We were able to replace the new hardware faster than what the<br />
client expected <strong>and</strong> they were very pleased how quickly it was<br />
done. Very much a surprise to them, because working with<br />
different vendors it usually takes a couple of weeks.<br />
Thanks to Kelly (<strong>Doug</strong> <strong>Mockett</strong>) we were able to turn a bad<br />
situation into a positive one.<br />
Thanks again, keep up the Customer Service.<br />
Scott Laxton<br />
From: Margaret Kurzman<br />
Sent: Monday, November 29, 2010 8:28 PM<br />
To: Info<br />
Subject: <strong>Mockett</strong>’s Website<br />
You know something guys, I’m a Parsons<br />
graduate with a sideline in graphic design,<br />
<strong>and</strong> I think you have some of the best<br />
graphic layout on your website <strong>and</strong> your<br />
billing sequence of anybody online.<br />
I can’t underst<strong>and</strong> why someone else hasn’t<br />
figured out to put the summary boxed out<br />
sequentially as you check out, the way you<br />
do. It’s beautiful, practical, user-friendly,<br />
like your products.<br />
What a pleasure!!<br />
Margaret Kurzman<br />
www.mockett.com 800.523.1269<br />
33<br />
We’Ve GOT MAIL!
FuRNITuRe LeGS<br />
Bolen Leg<br />
2009 Design <strong>Co</strong>mpetition Winner<br />
Jeffrey Bolen – Marina Del Rey, CA<br />
A fascinating leg offering a striking contrast of<br />
wood <strong>and</strong> metal that together create an extremely<br />
unique blend of modern design. A solid wood top<br />
tapers down <strong>and</strong> merges with a stainless steel leg<br />
that steps down to almost a point. A brilliant display<br />
of style <strong>and</strong> architectural innovation, <strong>and</strong> available<br />
strictly as a custom item to your exact dimension,<br />
stainless finish, wood choice, <strong>and</strong> wood finish.<br />
FL16/R-26<br />
Polished Chrome<br />
FL16<br />
Polished<br />
Chrome<br />
FL16/L-90<br />
Matte Black<br />
Metallic<br />
Silver<br />
Satin Nickel<br />
FL16/R-23<br />
Metallic Silver<br />
Matte<br />
Black<br />
Overall Height<br />
FL16/L FL16/L-26 FL16/L-23 FL16/L-17S FL16/L-90 4 3 /8"<br />
FL16/R FL16/R-26 FL16/R-23 FL16/R-17S FL16/R-90 4 3 /8”<br />
FL16L & FL16R<br />
This slim furniture leg continues the line<br />
created by the corner of your furniture <strong>and</strong><br />
carries it to the floor. An interesting perspective<br />
from any angle with a wide profile on<br />
one side <strong>and</strong> a thin, narrow edge on the<br />
other. Available as a Left or Right leg for<br />
either side of the furniture. Back by dem<strong>and</strong><br />
<strong>and</strong> now available with new finish options to<br />
make this the perfect solution for any small<br />
furniture application.<br />
Finishes: Satin Nickel, Metallic Silver,<br />
Polished Chrome, Matte Black.<br />
5-29/32" X 3-15/16"<br />
www.mockett.com 34<br />
800.523.1269<br />
5-29/32" X 3-15/16"<br />
4-3/8"<br />
2"
Note: Maximum length <strong>and</strong> width is 60"<br />
<strong>Co</strong>cktail Credenza Dining or Desk<br />
TLPAR/CK-94 TLPAR/CZ-94 TLPAR/DN-94<br />
TLPAR/CZ-94<br />
Dark Satin Aluminum<br />
Parsons Table Base - New Slimmer end Cap<br />
Our classic Parsons Table design is custom-sized to your<br />
choice, 7” to 60”. It is now available with the perfect finishing<br />
touch – new low profile end caps, in a new color that coordinates<br />
beautifully with the Dark Satin Aluminum extrusion.<br />
Caps available in a Smoke Grey finish <strong>and</strong> are extremely<br />
thin <strong>and</strong> unobtrusive, blending seamlessly into the design.<br />
Assembly is easy with the extruded Satin Aluminum<br />
construction. A contemporary twist on a traditional wood<br />
design available in most any size <strong>and</strong> made to your specifications.<br />
Simply fasten the attachment plugs into the legs, align<br />
<strong>and</strong> fasten down the horizontal tubes, then place the finishing<br />
plugs in each corner <strong>and</strong> the glides (non-adjustable) into the<br />
legs. Allen wrench included.<br />
Finish: Dark Satin Aluminum.<br />
Size examples:<br />
www.mockett.com 800.523.1269<br />
35<br />
2"<br />
2"<br />
2"<br />
20" 20"<br />
60"<br />
60"<br />
15"<br />
20" x 20" x 15" - cocktail table<br />
30"<br />
15"<br />
60" x 15" x 30" - credenza/hall table<br />
30"<br />
29"<br />
60" x 30" x 29" - dining table or desk<br />
FuRNITuRe LeGS
SPeCIALTy HARDWARe<br />
CH50 - Lean On <strong>Co</strong>at St<strong>and</strong><br />
A sophisticated <strong>and</strong> stable coat st<strong>and</strong> that is simply<br />
propped against the wall. No drilling or mounting<br />
necessary! St<strong>and</strong>ing 66 15/16” tall with a 1” diameter<br />
tube frame, this unconventional st<strong>and</strong> is easily mov-<br />
able throughout the home or office. Simple in form,<br />
yet dashingly modern in style, a true avant-garde<br />
design for the ages. Stainless steel combined with<br />
5/16” DIA.<br />
white powder-coating <strong>and</strong> with optional hangers.<br />
HNGR6-SSS<br />
16-3/8”<br />
LWAVG2/610-83 - Maple<br />
Finish: Satin Stainless Steel.<br />
9-7/8”<br />
19-11/16"<br />
66-15/16"<br />
29-17/32"<br />
LWAVG2/214-86 - Cherry<br />
Wood Air Vents<br />
CH50-SSS - Satin Stainless Steel<br />
An extension of the LWAVG series, these new rectangular Wood<br />
Air Vent Grilles are available in new sizes with a new design.<br />
Exquisite craftsmanship on the sturdy louvered vents <strong>and</strong> the<br />
smooth, rounded edges. Perfect for anyone who takes great pride<br />
in his work or living space. A classy way to vent unwanted heat.<br />
Four wood species to suit your personal design needs.<br />
Finishes: Cherry, Maple, Red Oak, White Oak.<br />
Wood Air Vents Overall (A) (B) Cut Out (C)<br />
LWAVG2/210 11 1/2” 3 3/4” 2 1/4” x 10”<br />
LWAVG2/212 13 1/2” 3 3/4” 2 1/4” x 12”<br />
LWAVG2/214 15 1/2” 3 3/4” 2 1/4” x 14”<br />
LWAVG2/48 9 1/2” 5 1/2” 4” x 8”<br />
LWAVG2/410 11 1/2” 5 1/2” 4” x 10”<br />
LWAVG2/412 13 1/2” 5 1/2” 4” x 12”<br />
LWAVG2/414 15 1/2” 5 1/2” 4” x 14”<br />
LWAVG2/610 11 1/2” 7 1/2” 6” x 10”<br />
LWAVG2/612 13 1/2” 7 1/2” 6” x 12”<br />
LWAVG2/614 15 1/2” 7 1/2” 6” x 14”<br />
www.mockett.com 800.523.1269<br />
36<br />
(A)<br />
(C) CUT OUT<br />
(B)
DWR5A-23 - Metallic Silver<br />
7-17/32"<br />
9"<br />
1"<br />
DWR5B-23 - Metallic Silver<br />
DWR5A-90 - Matte Black<br />
7-13/16"<br />
13-19/32"<br />
1-1/4"<br />
DWR5A & DWR5B<br />
This may take some getting used to. Rather than<br />
pulling to open like a traditional drawer, this swiveling<br />
circular design pivots around a central mounting<br />
post <strong>and</strong> swings out for user access. Equipped with<br />
pen <strong>and</strong> pencil trays, miscellaneous storage compartments,<br />
<strong>and</strong> a clever notepad slot, the DWR5 series<br />
has all the basic components of a traditional office<br />
drawer but puts a new spin on the design. Keeps your<br />
office supplies neatly organized <strong>and</strong> tucked away.<br />
Rotates in both directions for easy access. Two sizes.<br />
Finishes: Matte Black, Metallic Silver.<br />
DWR5 Length Height Depth<br />
DWR5A 9” 1” 7 17/32”<br />
DWR5B 13 19/32” 1 1/4” 7 13/16”<br />
DWR5B-90 - Matte Black<br />
www.mockett.com 800.523.1269<br />
37<br />
SPeCIALTy HARDWARe
PRICe LIST<br />
Technology-Into-Furniture Integration Grommets & Wire Managers<br />
Power & <strong>Co</strong>mmunication Systems pages 4-11<br />
<strong>Co</strong>lors/Finishes: Metallic Silver (23), Black (90), Aluminum (94),<br />
White (95), Satin Stainless Steel (SSS)<br />
1-11 12-24 25-49 50-99 100 +<br />
PCS5/M-90 $140.15 $136.70 $133.35 $130.15 $126.95<br />
PCS5/M-SSS $254.55 $248.35 $242.30 $236.40 $230.65<br />
PCS17/M-90 $295.00 $287.65 $280.45 $273.40 $266.60<br />
PCS17/M-SSS $539.45 $526.30 $513.45 $500.95 $488.75<br />
PCS18/M-90 $516.10 $503.50 $491.20 $479.20 $467.50<br />
PCS21/M-90 $130.00 $126.75 $123.60 $120.50 $117.50<br />
PCS21/M-94 $130.00 $126.75 $123.60 $120.50 $117.50<br />
PCS34A-90 $140.00 $136.50 $133.10 $129.75 $126.50<br />
PCS36A-90 $207.10 $201.95 $196.90 $191.95 $187.15<br />
PCS36B-90 $229.80 $224.05 $218.45 $213.00 $207.70<br />
PCS36C-90 $262.70 $256.15 $249.75 $243.50 $237.40<br />
PCS36/2/A-90 $426.00 $415.35 $404.95 $394.85 $385.00<br />
PCS36/2/B-90 $446.00 $434.85 $424.00 $413.40 $403.05<br />
PCS36/2/C-90 $474.30 $462.45 $450.90 $439.60 $428.60<br />
PCS36 GoGraphics! call for quote<br />
PCS46/ALM-90, 94 $880.00 $858.00 $836.50 $815.65 $795.25<br />
PCS46/STL-23, 90 $665.00 $648.40 $632.15 $616.35 $600.95<br />
PCS47A-90 $175.90 $171.50 $167.25 $163.05 $158.95<br />
PCS47A-95 $143.40 $139.85 $136.35 $132.95 $129.60<br />
PCS47B-90 $169.70 $165.45 $161.35 $157.30 $153.35<br />
PCS47B-95 $135.95 $132.55 $129.25 $126.00 $122.85<br />
PCS47C-90 $197.95 $193.00 $188.15 $183.45 $178.85<br />
PCS47C-95 $152.25 $148.45 $144.75 $141.15 $137.60<br />
PCS48A-90 $253.05 $246.70 $240.55 $234.55 $228.65<br />
PCS48A-95 $219.25 $213.80 $208.45 $203.25 $198.15<br />
PCS48B-90 $321.70 $313.65 $305.80 $298.20 $290.70<br />
PCS48B-95 $268.70 $262.00 $255.45 $249.05 $242.85<br />
PCS49A-90 $169.70 $165.45 $161.35 $157.30 $153.35<br />
PCS49A-95 $135.95 $132.55 $129.25 $126.00 $122.85<br />
PCS49B-90 $197.95 $193.00 $188.15 $183.45 $178.85<br />
PCS49B-95 $152.25 $148.45 $144.75 $141.15 $137.60<br />
PCS50A-90 $195.05 $190.15 $185.40 $180.75 $176.25<br />
PCS50A-94 $167.90 $163.70 $159.60 $155.60 $151.70<br />
PCS50B-90 $216.25 $210.85 $205.55 $200.45 $195.40<br />
PCS50B-94 $186.15 $181.50 $176.95 $172.55 $168.25<br />
PCS50C-90 $232.90 $227.05 $221.40 $215.85 $210.45<br />
PCS50C-94 $197.50 $192.60 $187.75 $183.05 $178.50<br />
PCS50D-90 $255.20 $248.80 $242.60 $236.50 $230.60<br />
PCS50D-94 $216.90 $211.45 $206.20 $201.05 $196.00<br />
PCS50E-90 $273.95 $267.10 $260.45 $253.90 $247.55<br />
PCS50E-94 $235.65 $229.75 $224.00 $218.40 $212.95<br />
PCS51A-90 $244.50 $238.40 $232.45 $226.60 $220.95<br />
PCS51A-94 $196.45 $191.55 $186.75 $182.10 $177.55<br />
PCS51B-90 $264.90 $258.25 $251.80 $245.50 $239.35<br />
PCS51B-94 $207.55 $202.35 $197.30 $192.35 $187.55<br />
PCS51C-90 $289.50 $282.25 $275.20 $268.30 $261.60<br />
PCS51C-94 $226.85 $221.20 $215.65 $210.25 $205.00<br />
PCS51D-90 $362.75 $353.70 $344.85 $336.20 $327.80<br />
PCS51D-94 $287.95 $280.75 $273.75 $266.90 $260.25<br />
PCS52A-90 $657.50 $641.05 $625.05 $609.40 $594.20<br />
PCS52B-90 $630.00 $614.25 $598.90 $583.90 $569.30<br />
PCS52C-90 $695.00 $677.65 $660.70 $644.15 $628.05<br />
PCS54A-90 $302.30 $294.70 $287.35 $280.15 $273.15<br />
PCS54A-94 $243.30 $237.25 $231.30 $225.50 $219.90<br />
PCS54B-90 $297.25 $289.85 $282.60 $275.50 $268.65<br />
PCS54B-94 $236.75 $230.85 $225.05 $219.45 $213.95<br />
PCS54C-90 $482.40 $470.35 $458.60 $447.15 $435.95<br />
PCS54C-94 $381.90 $372.35 $363.05 $353.95 $345.10<br />
PCS54 GoGraphics! call for quote<br />
CPu Holders page 10<br />
<strong>Co</strong>lor: Two-tone Grey (92)<br />
1-49 49-99 99-499 500 +<br />
CPU8-92 $111.00 $108.25 $105.50 $102.90<br />
Keyboard Platforms pages 10-11<br />
<strong>Co</strong>lor: Black (90)<br />
1-11 12-24 25-49 50-99 100 +<br />
KP7/M2-90 $225.85 $220.20 $214.70 $209.35 $204.10<br />
KP8/M2-90 $282.80 $275.75 $268.85 $262.15 $255.55<br />
KP9/M2-90 $235.10 $229.25 $223.50 $217.90 $212.45<br />
Wire & Cable Management page 12<br />
<strong>Co</strong>lor: Metallic Silver (23), Black (90), Navy Grey (92N), Pink (50E)<br />
1 - 10 11 - 49 50 - 99<br />
100 -<br />
499<br />
500 -<br />
999<br />
1000 +<br />
AG1-23 $1.65 $1.55 $1.40 $1.25 $1.15 $1.05<br />
AG2-23 $1.10 $0.95 $0.90 $0.75 $0.65 $0.60<br />
AG3-23 $2.75 $2.50 $2.30 $2.00 $1.80 $1.65<br />
OG1-23 $1.75 $1.65 $1.45 $1.30 $1.20 $1.10<br />
OG2-23 $1.15 $1.00 $0.95 $0.85 $0.70 $0.65<br />
OG3-23 $2.90 $2.65 $2.40 $2.15 $1.90 $1.75<br />
BG1-23 $1.80 $1.70 $1.50 $1.45 $1.25 $1.15<br />
BG2-23 $1.20 $1.05 $1.00 $0.90 $0.85 $0.70<br />
BG3-23 $3.00 $2.75 $2.50 $2.35 $2.10 $1.85<br />
SG1-23 $2.00 $1.80 $1.65 $1.50 $1.30 $1.20<br />
SG2-23 $1.25 $1.10 $1.00 $0.95 $0.90 $0.75<br />
SG3-23 $3.25 $2.90 $2.65 $2.45 $2.20 $1.95<br />
TG1-23 $2.15 $2.00 $1.80 $1.65 $1.45 $1.30<br />
TG2-23 $1.45 $1.25 $1.10 $1.00 $0.95 $0.85<br />
TG3-23 $3.60 $3.25 $2.90 $2.65 $2.40 $2.15<br />
SP1-23 $2.25 $2.05 $1.85 $1.70 $1.50 $1.40<br />
SP2-23 $1.45 $1.25 $1.10 $1.00 $0.95 $0.85<br />
SP3-23 $3.70 $3.30 $2.95 $2.70 $2.45 $2.25<br />
EDP1-23 $2.30 $2.10 $1.85 $1.70 $1.55 $1.40<br />
EDP2-23 $1.50 $1.30 $1.20 $1.05 $0.95 $0.90<br />
EDP3-23 $3.80 $3.40 $3.05 $2.75 $2.50 $2.30<br />
XG1-23 $2.50 $2.30 $2.05 $1.85 $1.65 $1.60<br />
XG2-23 $1.65 $1.45 $1.30 $1.25 $1.05 $1.00<br />
XG3-23 $4.15 $3.75 $3.35 $3.10 $2.70 $2.60<br />
YG1-23 $2.65 $2.40 $2.20 $2.00 $1.80 $1.70<br />
YG2-23 $1.75 $1.55 $1.40 $1.25 $1.10 $1.05<br />
YG3-23 $4.40 $3.95 $3.60 $3.25 $2.90 $2.75<br />
ZG1-23 $2.80 $2.65 $2.35 $2.15 $1.95 $1.80<br />
ZG2-23 $1.85 $1.60 $1.45 $1.25 $1.15 $1.10<br />
ZG3-23 $4.65 $4.25 $3.80 $3.40 $3.10 $2.90<br />
LO1-23 $3.25 $3.05 $2.70 $2.50 $2.15 $2.10<br />
LO2-23 $1.95 $1.65 $1.50 $1.30 $1.25 $1.00<br />
LO3-23 $5.20 $4.70 $4.20 $3.80 $3.40 $3.10<br />
RG1-23 $2.30 $2.10 $1.85 $1.65 $1.50 $1.45<br />
RG2-23 $1.50 $1.30 $1.20 $1.10 $1.00 $0.90<br />
RG3-23 $3.80 $3.40 $3.05 $2.75 $2.50 $2.35<br />
CHP3-90/90 $11.10 $10.80 $10.55 $10.30 $10.05 $9.80<br />
CHP3-92N/92N,<br />
95/50E<br />
$12.55 $12.25 $11.95 $11.65 $11.35 $11.05<br />
Metal Grommets page 13<br />
Finishes: Black (90), Satin Aluminum (94), Brushed Satin Aluminum (94S)<br />
1 - 49 50 - 99 100 - 499 500 - 999 1000+<br />
MAX1/A-90 $37.45 $36.50 $35.60 $34.70 $33.85<br />
MAX1/B-90 $51.20 $49.90 $48.65 $47.45 $46.25<br />
MAX1/C-90 $70.75 $69.00 $67.25 $65.60 $63.95<br />
MAX2/A-94 $17.85 $17.40 $17.00 $16.55 $16.15<br />
MAX2/B-94 $26.75 $26.10 $25.45 $24.80 $24.20<br />
MAX2/C-94 $31.15 $30.40 $29.60 $28.90 $28.15<br />
MAX2/D-94 $49.85 $48.60 $47.40 $46.20 $45.05<br />
MAX3-94 $59.25 $57.80 $56.35 $54.95 $53.55<br />
MAX3-94S $65.15 $63.50 $61.95 $60.40 $58.90<br />
Trash Managers page 14<br />
Finishes: Polished Stainless Steel (PSS), Satin Stainless Steel (SSS)<br />
1 - 49 50 - 99 100 - 499 500 - 999 1000+<br />
TM1C-PSS, SSS $30.25 $29.50 $28.75 $28.05 $27.35<br />
TM2C-PSS, SSS $41.00 $39.95 $38.95 $38.00 $37.05<br />
Wire Managers page 14<br />
<strong>Co</strong>lor: Black (90)<br />
1 - 49 50 - 99 100 - 499 500 - 999 1000+<br />
WM27-90 $29.95 $29.20 $28.50 $27.75 -<br />
WM28/2IN-90 $1.65 $1.55 $1.45 $1.35 $1.25<br />
www.mockett.com 800.523.1269<br />
38
Drawer Pulls, Knobs & Door H<strong>and</strong>les Supports<br />
In-Stock Pulls pages 16-25<br />
Finishes: Satin Nickel (17S), Polished Chrome (26), Satin Stainless Steel (SSS)<br />
1 - 99 100 - 499 500 - 999 1000 +<br />
DP105AA/3-SSS $18.90 $18.45 $17.95 $17.50<br />
DP105AB/3-SSS $19.95 $19.45 $18.95 $18.50<br />
DP105C/3-SSS $25.25 $24.60 $24.00 $23.40<br />
DP105D/3-SSS $26.90 $26.20 $25.55 $24.90<br />
DP152A-17S $12.55 $12.25 $11.90 $11.65<br />
DP152B-17S $14.85 $14.45 $14.10 $13.75<br />
DP152C-17S $16.10 $15.70 $15.30 $14.90<br />
DP152D-17S $14.85 $14.50 $14.15 $13.80<br />
DP174A-17S $10.50 $10.25 $10.00 $9.75<br />
DP174A-26 $10.50 $10.25 $10.00 $9.75<br />
DP174B-17S $15.85 $15.45 $15.05 $14.70<br />
DP174B-26 $15.85 $15.45 $15.05 $14.70<br />
DP174C-17S $21.55 $21.00 $20.45 $19.95<br />
DP174C-26 $21.55 $21.00 $20.45 $19.95<br />
DP175A-17S $7.60 $7.45 $7.25 $7.05<br />
DP175B-17S $12.15 $11.85 $11.55 $11.25<br />
DP175C-17S $17.15 $16.70 $16.30 $15.90<br />
DP176A-17S $12.30 $11.95 $11.70 $11.40<br />
DP176B-17S $16.40 $16.00 $15.60 $15.20<br />
DP177A-17S $12.85 $12.55 $12.20 $11.90<br />
DP177B-17S $17.45 $17.05 $16.60 $16.20<br />
DP178A-17S $9.05 $8.85 $8.60 $8.40<br />
DP178B-17S $15.30 $14.90 $14.55 $14.15<br />
DP179A-17S $11.55 $11.25 $10.95 $10.70<br />
DP179B-17S $17.10 $16.65 $16.25 $15.85<br />
DP180A-17S $9.00 $8.80 $8.55 $8.35<br />
DP180B-17S $10.65 $10.40 $10.10 $9.85<br />
DP181A-17S $8.35 $8.15 $7.95 $7.75<br />
DP181B-17S $12.05 $11.75 $11.45 $11.20<br />
DP182A-17S $5.95 $5.80 $5.65 $5.50<br />
DP182B-17S $9.75 $9.50 $9.30 $9.05<br />
DP183A-17S $8.10 $7.90 $7.70 $7.50<br />
DP183B-17S $12.70 $12.40 $12.10 $11.80<br />
DP184-17S $12.30 $12.00 $11.70 $11.40<br />
DP185-17S $13.30 $13.00 $12.65 $12.35<br />
DP186-17S $9.05 $8.80 $8.60 $8.35<br />
DP187-17S $13.40 $13.05 $12.75 $12.45<br />
DP188-17S $9.10 $8.90 $8.65 $8.45<br />
DP189-17S $9.60 $9.35 $9.15 $8.90<br />
DP190-17S $11.30 $11.05 $10.75 $10.50<br />
DP191-17S $9.30 $9.05 $8.85 $8.60<br />
DP192-17S $7.65 $7.45 $7.30 $7.10<br />
DP193-17S $9.30 $9.10 $8.85 $8.65<br />
DP194A-17S $8.10 $7.90 $7.70 $7.50<br />
DP194B-17S $12.25 $11.95 $11.65 $11.35<br />
DP195-17S $9.65 $9.45 $9.20 $8.95<br />
DP196-SSS $10.85 $10.60 $10.30 $10.05<br />
DP197-SSS $10.85 $10.60 $10.35 $10.05<br />
DP198-17S $13.55 $13.25 $12.90 $12.60<br />
DP199-26 $24.35 $23.75 $23.15 $22.55<br />
DP200-17S $14.10 $13.75 $13.40 $13.10<br />
Special Order Pulls pages 16-25<br />
(price <strong>and</strong> lead-time may vary - call for quote)<br />
Finishes: Satin Nickel (17S), Polished Chrome (26), Satin Stainless Steel (SSS)<br />
DP152A-26 DP180A-26 DP188-26M<br />
DP152C-26 DP180B-26 DP189-26<br />
DP152D-26 DP181A-26 DP190-26<br />
DP175A-26 DP181B-26 DP190-26M<br />
DP175B-26 DP182A-26 DP191-26<br />
DP175C-26 DP182B-26 DP192-26<br />
DP177A-26 DP183A-26 DP193-26<br />
DP177B-26 DP183B-26 DP194A-26<br />
DP178A-26 DP185-26 DP194B-26<br />
DP178B-26 DP186-26 DP195-26<br />
DP179A-26 DP187-26 DP200-26<br />
DP179B-26 DP188-26<br />
Multi-Purpose Support Hangers pages 26 - 29<br />
Finishes: Aluminum (94), Satin Stainless Steel (SSS)<br />
2" Dia Aluminum 1 - 49 50 - 99 100 - 499 500 - 999 1000 +<br />
MPB12/CAP1-94 $23.75 $23.15 $22.55 $22.00 $21.45<br />
MPB12/CAP2-94 $25.30 $24.65 $24.05 $23.45 $22.85<br />
MPB12/1-94 $22.30 $21.75 $21.20 $20.65 $20.15<br />
MPB12/2-94 $31.00 $30.25 $29.45 $28.75 $28.00<br />
MPB12/3-94 $36.95 $36.05 $35.15 $34.25 $33.40<br />
MPB12/4-94 $43.90 $42.80 $41.75 $40.70 $39.65<br />
MPB12/6-94 $54.95 $53.55 $52.25 $50.95 $49.65<br />
Low Profile Caps 1 - 49 50 - 99 100 - 499 500 - 999 1000 +<br />
MPB9/CAP2-94 $13.95 $13.60 $13.25 $12.95 $12.60<br />
MPB10/CAP2-94 $15.00 $14.65 $14.25 $13.90 $13.55<br />
MPB11/CAP2-94 $16.85 $16.45 $16.00 $15.60 $15.25<br />
MPB12/CAP2-94 $25.30 $24.65 $24.05 $23.45 $22.85<br />
½”DIA. 1 - 49 50 - 99 100 - 499 500 - 999 1000 +<br />
MPB6.5/CAP3-SSS $7.60 $7.40 $7.20 $7.05 $6.85<br />
MPB6.5/.5-SSS $8.75 $8.55 $8.30 $8.10 $7.90<br />
MPB6.5/.75-SSS $8.95 $8.75 $8.50 $8.30 $8.10<br />
¾” DIA. 1 - 49 50 - 99 100 - 499 500 - 999 1000 +<br />
MPB7.5/CAP3-SSS $9.20 $8.95 $8.75 $8.50 $8.30<br />
MPB7.5/.5-SSS $9.85 $9.60 $9.35 $9.15 $8.90<br />
MPB7.5/.75-SSS $10.55 $10.30 $10.05 $9.80 $9.55<br />
MPB7.5/1-SSS $12.45 $12.15 $11.85 $11.55 $11.25<br />
1” DIA. 1 - 49 50 - 99 100 - 499 500 - 999 1000 +<br />
MPB9/CAP3-SSS $12.65 $12.35 $12.05 $11.70 $11.45<br />
MPB9/.75-SSS $15.55 $15.15 $14.80 $14.40 $14.05<br />
MPB9/1-SSS $15.90 $15.50 $15.10 $14.75 $14.35<br />
1 ¼”DIA. 1 - 49 50 - 99 100 - 499 500 - 999 1000 +<br />
MPB10/CAP3-SSS $14.10 $13.75 $13.40 $13.05 $12.75<br />
MPB10/1-SSS $18.60 $18.15 $17.70 $17.25 $16.80<br />
MPB10/1.5-SSS $21.60 $21.05 $20.55 $20.00 $19.50<br />
Adjustable Panel Grips 1 - 49 50 - 99 100 - 499 500 - 999 1000 +<br />
MPB9/APG-94 $25.85 $25.20 $24.55 $23.95 $23.35<br />
MPB10/APG-94 $28.00 $27.30 $26.60 $25.95 $25.30<br />
Neoprene Wrench for Low-Profile Cap<br />
MPB-HD-LPW $1.50<br />
Shelf Supports pages 30-32<br />
Finishes: Satin Nickel (17S), Metallic Silver (23), Polished Chrome (26), Black (90)<br />
1 - 49 50 -99 100 - 499 500 +<br />
SH35-17S, 26 $10.60 $10.35 $10.10 $9.85<br />
SH35-23, 90 $9.80 $9.55 $9.30 $9.10<br />
SH35A-17S, 26 $9.10 $8.90 $8.65 $8.45<br />
SH35A-23, 90 $7.65 $7.45 $7.25 $7.05<br />
SH36-17S, 26 $10.60 $10.35 $10.30 $10.10<br />
SH36-23, 90 $9.80 $9.55 $9.30 $9.10<br />
SH36A-17S, 26 $9.10 $8.90 $8.65 $8.45<br />
SH36A-23, 90 $7.65 $7.45 $7.25 $7.05<br />
SH37-17S, 23, 26, 90 $15.05 $14.70 $14.35 $13.95<br />
SH40-90, 94 $25.85 $25.20 $24.60 $23.95<br />
Sold in Pairs 1 - 11 12 - 24 25 - 49 50 +<br />
SH41A-23 $10.25 $10.00 $9.75 $9.50<br />
SH41A-26 $11.20 $10.90 $10.65 $10.35<br />
SH41A-17S $12.55 $12.25 $11.95 $11.65<br />
SH41B-23 $15.20 $14.80 $14.45 $14.10<br />
SH41B-26 $16.60 $16.20 $15.80 $15.40<br />
SH41B-17S $18.00 $17.55 $17.10 $16.65<br />
SH41C-23 $24.15 $23.55 $22.95 $22.35<br />
SH41C-26 $28.05 $27.35 $26.70 $26.00<br />
Sold in Pairs 250 + 250 pair minimum<br />
SH41C-17S $28.70<br />
1 - 11 12 - 24 25 - 49 50 +<br />
SWS6A-PSS, SSS $87.40 $85.20 $83.05 $81.00<br />
SWS6/BRK-SSS $11.85 $11.55 $11.25 $11.00<br />
www.mockett.com 800.523.1269<br />
39<br />
PRICe LIST
PRICe LIST<br />
Furniture Legs<br />
Desk & <strong>Co</strong>unter Height Legs page 34<br />
TL/BOLEN Call for quote<br />
Small (Li’l) Legs page 34<br />
Finishes: Satin Nickel (17S), Metallic Silver (23), Polished Chrome (26), Black (90)<br />
1-11 12-24 25-49 50-99 100 +<br />
FL16/L-17S, 26 $19.05 $18.60 $18.15 $17.70 $17.25<br />
FL16/L-23, 90 $15.45 $15.10 $14.70 $14.35 $14.00<br />
FL16/R-17S, 26 $19.05 $18.60 $18.15 $17.70 $17.25<br />
FL16/R-23, 90 $15.45 $15.10 $14.70 $14.35 $14.00<br />
Parsons Table Base Series page 35<br />
Finish: Dark Satin Aluminum<br />
1-11 12-24 25-49 50-99 100 +<br />
TLPAR/CK-94 $245.00 $238.90 $232.90 $227.10 $221.40<br />
TLPAR/CZ-94 $470.00 $458.25 $446.80 $435.60 $424.75<br />
TLPAR/DN-94 $496.00 $484.25 $472.45 $460.95 $449.70<br />
Specialty Hardware & Accessories<br />
<strong>Co</strong>at St<strong>and</strong> page 36<br />
<strong>Co</strong>lors/Finishes: White (95), Satin Stainless Steel (SSS)<br />
1 - 11 12 - 24 25 - 49 50 - 99 100 +<br />
CH50-SSS/95 $675.00 $658.15 $641.65 $625.65 $609.95<br />
HNGR6-SSS $41.10 $40.05 $39.05 $38.10 $37.15<br />
Wood Air Vent Grilles page 36<br />
Wood Species: Red Oak (80), White Oak (81), Maple (83), Cherry (86)<br />
1 - 11 12 - 24 25 - 49 50 - 99 100 +<br />
LWAVG2/210-80, 81 $31.90 $31.10 $30.30 $29.60 $28.85<br />
LWAVG2/210-83 $36.30 $35.40 $34.50 $33.65 $32.80<br />
LWAVG2/210-86 $44.65 $43.55 $42.45 $41.40 $40.35<br />
LWAVG2/212-80, 81 $34.10 $33.25 $32.40 $31.60 $30.80<br />
LWAVG2/212-83 $38.50 $37.55 $36.60 $35.70 $34.80<br />
LWAVG2/212-86 $47.75 $46.55 $45.40 $44.25 $43.15<br />
LWAVG2/214-80, 81 $36.30 $35.40 $34.50 $33.65 $32.80<br />
LWAVG2/214-83 $40.70 $39.70 $38.70 $37.70 $36.80<br />
LWAVG2/214-86 $50.80 $49.53 $48.30 $47.10 $46.90<br />
LWAVG2/410-80, 81 $39.50 $38.50 $37.55 $36.60 $35.70<br />
LWAVG2/410-83 $43.90 $42.80 $41.75 $40.70 $39.70<br />
LWAVG2/410-86 $54.90 $53.55 $52.20 $50.90 $49.60<br />
LWAVG2/412-80, 81 $40.70 $39.70 $38.70 $37.70 $36.80<br />
LWAVG2/412-83 $45.10 $44.00 $42.90 $41.80 $40.75<br />
LWAVG2/412-86 $57.00 $55.60 $54.20 $52.85 $51.50<br />
LWAVG2/414-80, 81 $42.90 $41.85 $40.80 $39.75 $38.80<br />
LWAVG2/414-83 $47.30 $46.10 $44.95 $43.85 $42.75<br />
LWAVG2/414-86 $60.05 $58.55 $57.10 $55.65 $54.25<br />
LWAVG2/48-80, 81 $38.50 $37.55 $36.60 $35.70 $34.80<br />
LWAVG2/48-83 $42.90 $41.85 $40.80 $39.75 $38.70<br />
LWAVG2/48-86 $53.90 $52.55 $51.25 $49.95 $48.70<br />
LWAVG2/610-80, 81 $42.90 $41.85 $40.80 $39.75 $38.80<br />
LWAVG2/610-83 $47.30 $46.10 $44.95 $43.85 $42.75<br />
LWAVG2/610-86 $60.05 $58.55 $57.10 $55.65 $54.30<br />
LWAVG2/612-80, 81 $45.10 $44.00 $42.90 $41.80 $40.75<br />
LWAVG2/612-83 $49.50 $48.25 $47.05 $45.90 $44.75<br />
LWAVG2/612-86 $63.15 $61.60 $60.05 $58.55 $57.10<br />
LWAVG2/614-80, 81 $47.30 $46.10 $44.95 $43.85 $42.75<br />
LWAVG2/614-83 $51.70 $50.40 $49.15 $47.90 $46.70<br />
LWAVG2/614-86 $66.20 $64.55 $62.95 $61.35 $59.80<br />
Desk Drawers page 37<br />
<strong>Co</strong>lors: Metallic Silver (23), Black (90)<br />
1 - 11 12 - 24 25 - 49 50 - 99 100 +<br />
DWR5A-23, 90 $18.00 $17.55 $17.11 $16.70 $16.30<br />
DWR5B-23, 90 $24.00 $23.40 $22.80 $22.25 $21.70<br />
About us<br />
Guarantee<br />
We st<strong>and</strong> 100% behind everything we sell you. If you are not<br />
satisfied, for any reason, let us know. If we cannot satisfy you, we will<br />
accept back all items sold to you (except custom-made-to-order items,<br />
of course) <strong>and</strong> give you a 100% credit or refund, freight included.<br />
Shipping <strong>and</strong> Delivery<br />
96% of all orders are shipped the same day the order is received, except in<br />
the rare instance that we are out of stock, or when an item is to be custommade.<br />
We ship UPS, FedEx or Priority Mail - unless you specify another<br />
carrier. Large items or quantity orders may ship by truck. Southern California<br />
delivery via our plane or truck: $35 - $250. Freight charges will be prepaid<br />
<strong>and</strong> added to your invoice. Or, you may charge freight to your own account.<br />
We pay ground shipping on all orders for grommets, drawer pulls <strong>and</strong> coat<br />
hooks within the continental USA accompanied by check.<br />
eZ Ordering<br />
www.mockett.com for secure online ordering or…<br />
1 Make copy of order form on next page<br />
2 Fill out with your order<br />
3 Fax it to us 800-235-7743<br />
4 96% of the time your order will ship same day!<br />
To Call<br />
800-523-1269 from the USA, Canada, Puerto Rico <strong>and</strong> U.S. Virgin<br />
Isl<strong>and</strong>s. 310-318-2491 from everywhere else.<br />
To Fax<br />
800-235-7743 from the USA, Canada, Puerto Rico <strong>and</strong> U.S. Virgin<br />
Isl<strong>and</strong>s. 310-376-7650 from everywhere else.<br />
To e-mail To Order Online<br />
info@mockett.com www.mockett.com<br />
To Write To Visit/Ship<br />
<strong>Doug</strong> <strong>Mockett</strong> & <strong>Co</strong>mpany, Inc. 1915 Abalone Avenue<br />
P.O.Box 3333 Torrance, CA 90501, USA<br />
Manhattan Beach, CA 90266<br />
Hours<br />
Monday through Friday,<br />
6:00 a.m. to 5:30 p.m., Pacific Time. (Will call: 8:00 a.m. to 5:00 p.m.)<br />
Custom Orders<br />
Items custom-made to your exact specifications require a 50% deposit<br />
with order <strong>and</strong> are not returnable, of course.<br />
Blanket Orders<br />
We welcome your large order to ship over 6-12 months. Please call to<br />
arrange pricing <strong>and</strong> terms.<br />
Prices<br />
Effective January 2011 <strong>and</strong> subject to change without notice.<br />
Price Quotations<br />
When you need a price quote, please ask that it be faxed or<br />
emailed to you so we both know who said what to whom.<br />
Prices in this catalog prevail over verbal quotes.<br />
Packing<br />
Packing is included in the price of all items, except for Cylinders or Cubes<br />
<strong>and</strong> Table Legs that require cartoning, crating or boxing. Approximate<br />
charges are: Cylinder $30 to $50 depending on size; Table Leg $8.50<br />
for 1 or 2, depending on how many will fit into our st<strong>and</strong>ard box.<br />
Call for exact quote.<br />
<strong>Co</strong>lors<br />
The color photographs of products shown in this catalog may not exactly<br />
match the actual color of the product. If you need to confirm a color,<br />
please call <strong>and</strong> we can send a color sample for approval.<br />
Terms<br />
We accept VISA, MasterCard, American Express or Discover.<br />
Net terms may be established, please request our credit application.<br />
C.O.D. available.<br />
Returns<br />
We accept back any item (except custom-made items, of course) at<br />
NO RESTOCKING CHARGE. Call before shipping items for Return<br />
Authorization Number. We do ask that it be packed well to arrive back<br />
here in resalable condition. Please be sure to pack well to assure credit.<br />
www.mockett.com 800.523.1269<br />
40
Sold To:<br />
Order:<br />
Payment:<br />
EZ Order Form<br />
<strong>Co</strong>py <strong>and</strong> Fax to:<br />
800-235-7743 or 310-376-7650<br />
Customer<br />
Customer No. (if known)<br />
q Check here if residential delivery (this includes Home Offices)<br />
Street<br />
City State<br />
Your name <strong>and</strong> Phone#<br />
(if different from above) Street address, not a P.O. Box (unless shipping priority mail)<br />
<strong>Co</strong>mpany Name<br />
Street<br />
For ALL credit card orders, COMPLETE ALL SECTiONS of form below<br />
Exact name(s) on card<br />
Exact billing address for card (This is where your credit card bill is mailed to)<br />
Card number<br />
Expiration date<br />
Signature<br />
Attention<br />
City State<br />
q Open account (Established accounts only)<br />
q Credit card - Visa, MasterCard, American Express or Discover<br />
q COD<br />
q PrePay - Check enclosed (*call for total including shipping charges)<br />
Street<br />
City State<br />
ZIP<br />
ZIP<br />
ZIP<br />
Date<br />
Phone #<br />
Fax #<br />
Email<br />
P.O.#:<br />
Qty Part Number Description <strong>Co</strong>lor<br />
Job:<br />
Preferred Shipping Method:<br />
q Ground<br />
(We may substitute 3 Day at our<br />
discretion if cost is same or less)<br />
q 3 Day<br />
q 2 Day Air<br />
q Next Day Air<br />
q Priority<br />
q St<strong>and</strong>ard<br />
q Priority Mail (no COD’s)<br />
Unit<br />
Price $<br />
*Merch<strong>and</strong>ise Total<br />
NOTE: When ordering Drawer Pulls, please specify screw length, ( 3/4”, 1”, 1 1/4”, or 1 1/2”)<br />
otherwise 1” will be sent.<br />
*Appropriate shipping/COD/Tax charges will be added<br />
Total $<br />
If you would like a shipping<br />
confirmation <strong>and</strong> tracking<br />
number, please provide your<br />
E-mail:<br />
Would you like to receive our<br />
Monthly E-News?<br />
q Y q N<br />
www.mockett.com 800.523.1269<br />
iBC
P.O. Box 3333<br />
Manhattan Beach, CA 90266<br />
U.S.A.<br />
800•523•1269<br />
www.mockett.com<br />
To make changes<br />
please make a<br />
copy <strong>and</strong> fax to<br />
(800) 235-7743.