Cabinet Hardware - Die-Pat

sliding door components
FRONT DOOR SHEAVE, ZINC PLATED STEEL
3/4”(19mm) SIDE MOUNTED DOOR HANGER
MODEL NO. WHEEL TYPE
SLIDING DOOR COMPONENTS
OVERHEAD TRACK COMPONENTS FOR SLIDING DOORS
B58-5511 FLAT, STEEL PLATED, BALL BEARING
B58-5513 FLAT, NYLON SURFACE, STEEL INNER RACES,
BALL BEARING
REAR DOOR SHEAVE, ZINC PLATED STEEL
3/4”(19mm) SIDE MOUNTED DOOR HANGER
MODEL NO. WHEEL TYPE
B58-5521 FLAT, STEEL PLATED, BALL BEARING
B58-5523 FLAT, NYLON SURFACE, STEEL INNER RACES,
BALL BEARING
MODEL NO.
B62-1093
FOR 3/4”(19mm)
SLIDING DOORS
MATERIAL: NYLON
O.A. SIZE: 1-3/4” X 2-1/8”
(44mm x 54mm)
G30
DOOR GUIDE
15/16” (23.8mm)
1-3/4” (44.5mm)
1”
(25mm)
1”
(25mm)
1-5/8”
(41mm)
2-1/8”(54mm)
3/4”
(19mm)
Mount with #8 PHMS (2)
DOOR STOP
MODEL NO.
B60-1086
MATERIAL:
STEEL,
ZINC PLATED
BUMPER:
SOLID RUBBER
www.chgusa.com
SLIDING DOOR TRACK
EXTRUDED ALUMINUM
16 GAUGE
MODEL NO. LENGTH
B57-0048 48” (1219mm)
B57-0060 60” (1524mm)
B57-0072 72” (1828mm)
B57-0120 120” (3048mm)
B57-0144 144” (3657mm)
GUIDE PINS
MODEL NO. B56-1096
SPRING LOADED with PUSH-ON SPEED NUTS
3/16”
(5mm)
1-1/4”
(32mm)
1-3/4”
(44mm)
1”(25mm) DIA.
BEARINGS
FRONT SHEAVE
REAR SHEAVE
1-1/2” (38mm)
1” (25mm)
MATERIAL: CHROME PLATED BRASS
5/16”
(8mm)