Kawasaki Centrifugal Compressor (PDF:2.3MB)

Gas Compression Module
More than just a compressor supplier, being a consolidated and an integral solution supplier for offshore gas
compression needs is also one of our outstanding benefit.
Kawasaki is one of the major API-617 Centrifugal Compressor suppliers in the world and also well known as a
Gas Compression Module supplier. Our service covers not only supply of Kawasaki Centrifugal Compressor,
but also all areas of Gas Compression Module, i.e. Engineering, Procurement of material & equipment,
Construction, Inspection and Test, Load-out, and Offshore Commissioning. Our Gas Compression Module
will be designed in accordance with specific customers’ requirements, applicable codes and standards to
ensure safe and stable gas production under severe offshore environment.
Module Concept
Gas Compression Module is a mini plant compactly packaged with
centrifugal compressor(s), main driver(gas/steam turbine or electric
motor), gas & lube oil coolers, pressure vessels, process piping,
electrical items, instrumentation, fire & gas system, lighting system,
maintenance facilities in a single point lifting structure. Typically, Gas
Compression Module is applied to Gas Gathering, Gas
Transportation/Boosting, Gas Lift, and Gas Re-injection services at
offshore platforms.
Gas Compression Module can be string-tested at the module
fabrication yard to ensure good quality and performance before
shipment. This onshore work also contributes to simplifying the
installation / hook up work at the offshore site.
This concept can drastically minimize the offshore construction,
installation & commissioning work and eliminate unforeseen
problems and risks, since offshore environment is harsh for
construction and commissioning due to unpredictable
climate/weather/tide conditions, limited construction
facilities/manpower, and limited construction space.
Various type of module can be designed and fabricated in accordance
with the customer’s preference. Multiple-deck type module gives
space flexibility especially for offshore platforms, where very limited
space is available for topside equipment, without compromising the
emergency escape route, maintenance space, and accessibility.
The flexibility to design the Module accommodating multiple
compressor trains is available. The controls room for the Gas
Compression Module can also be fitted within the module boundary
if desired.
Single lifted Gas Compression Module for KNOC
Typical Module Overview
Single-deck type Double-deck type Triple-deck type
Module Engineering
Kawasaki undertakes module engineering in all areas
including process, mechanical, piping, structural,
electrical, instrumentation, and architectural
engineering with the latest technologies established
from the rich experiences of Gas Compression
Modules for over 40 years. All safety features such as
fire fighting, fire suppression, alarm and
communication system etc. are taken into
consideration as the basis of module engineering.
Commercial codes such as HYSYS, SACS and
CAESAR II, PDMS etc, which are common for
engineering farms for Oil & Gas sector, are utilized to
module engineering.
Our design satisfies not only the customer’s
specifications and international codes & standards, but
also all requirements for easy operation and
maintenance. This is achieved by applying our highly
reliable Kawasaki Centrifugal Compressors with
consideration to maintenance and operation.
Concurrent engineering between Kawasaki
compressor engineering section and module
engineering section shortens the overall engineering
period, which eventually maximizes the engineering
quality. This is our basis of providing the best benefit
to all of our favorable customers.
Module Fabrication & Test
Kawasaki is able to fabricate the module either at its
own facility or at the subcontractor’s yard outside of
Japan under the supervision of Kawasaki personnel,
depending on the size & weight of module, final
destination etc. In both cases, Kawasaki ensures the
total quality of the module by comprehensive quality
controls, all the way from raw material procurement
up to the fabrication and installation stage.
Fabrication will be carried out only by qualified
welders or workers and subject to applicable
inspection at each stage. Finally, to ensure reliable
package integrity, shipments are made after
confirming the quality through intensive testing,
including optional no load string test and/or full
load/ full pressure/ full speed string tests.
Process Design - HYSYS
Structural Analysis – SACS 3D Modeling – PDMS
Kawasaki Centrifugal Compressor
Gas Compression Module for KNOC (Korea)
Gas Compression Module for PCSB (Malaysia)
12 13