Assembly Instructions -Cantilever Boat Lifts - Vibo Marine
Assembly Instructions -Cantilever Boat Lifts - Vibo Marine
Assembly Instructions -Cantilever Boat Lifts - Vibo Marine
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Procedure 5B<br />
For the 3600 lift<br />
(Step 6) After all the U-bolts are on, place ½” washers on them and fasten down with ½” nuts,<br />
as shown in “figure A”. When all the U-bolts are tightened, string the cable through the one link<br />
U-bolt pulley on the side frame post. Then run the cable back to the pulley on the cable U-bolt<br />
and over to the one link U-bolt on the middle frame. From there bring the cable through the two<br />
link U-bolt pulley, located on the side frame post under the winch, then bring the cable up to the<br />
winch.<br />
10
Change language