Deposition Testimony of: Robert Bodek - Broadcast Interactive Media
Deposition Testimony of: Robert Bodek - Broadcast Interactive Media
Deposition Testimony of: Robert Bodek - Broadcast Interactive Media
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
00055:16 Q. Lost returns is a situation<br />
17 where you're injecting mud down, you expect<br />
18 to get it back up with the cuttings, but<br />
19 you're not getting it back, you're losing<br />
20 it to the formation?<br />
21 A. Sure.<br />
22 Q. Lost returns, to put it bluntly,<br />
23 is a bad thing, right?<br />
24 A. Yes.<br />
25 Q. Okay. And it's a bad thing<br />
00056:01 because you have fractured the formation<br />
02 and you cannot drill when you lose returns?<br />
03 A. Yes.<br />
Page 56:22 to 57:06<br />
00056:22 Q. All right. With respect to this<br />
23 issue <strong>of</strong> drilling into weak goo or possum<br />
24 shit and leaves as opposed to hard rock,<br />
25 why is that relevant or important to keep<br />
00057:01 an eye on when you're drilling?<br />
02 A. The less consolidated formations<br />
03 will be more susceptible to fracture.<br />
04 Q. Why?<br />
05 A. They have a lower tensile<br />
06 strength.<br />
Page 58:10 to 58:15<br />
00058:10 Q. Sure. And I don't mean to<br />
11 oversimplify or demean the, you know,<br />
12 importance <strong>of</strong> what you do. But the idea<br />
13 that your hydrostatic mud weight needs to<br />
14 be in line with your pore pressure, I mean,<br />
15 that's just basic physics, isn't it?<br />
Page 58:18 to 59:25<br />
00058:18 A. I don't know how physics applies<br />
19 to it necessarily.<br />
20 Q. If you put something into the<br />
21 well that is heavier --<br />
22 A. Yes.<br />
23 Q. -- than the pore pressure, it's<br />
24 not going to want to rise up relative to<br />
25 the gas, is it? It's going to want to<br />
00059:01 sink?<br />
02 A. There's, perhaps, other factors<br />
03 in play. There's -- there's a certain<br />
04 degree <strong>of</strong> uncertainty. I don't believe<br />
05 it's that clear-cut.<br />
06 Q. But in terms <strong>of</strong> what is<br />
07 clear-cut, if your hydrostatic mud weight<br />
13