CC-E0001 Mascara - Lubrizol

Mascara CC-E0001
Procedure:
PART A
1. Add the deionized water to a suitable kettle and begin heating the
water to 40°C. Add the methylparaben and mix until dissolved.
2. Turn the heat off and add the Methocel ® . Mix until uniformly
dispersed and until no lumps appear.
3. Add the triethanolamine and mix until the gum is hydrated and clear.
4. Add the panthenol and mix until dissolved.
5. Add the Avalure* UR 450 Polymer and continue mixing until the
mixture is uniform.
6. Add the PVP powder and mix until all of the powder is in the solution
and PART A is uniform. Maintain the temperature but raise it to
75°C just before combining with PARTS B & C.
PART B & C:
7. Mix all of the ingredients of PART C (oil phase) in a suitable kettle
and melt to 75°C.
8. When all of PART C has been melted, add the pigment of PART B
to it and mix until the pigment is completely wetted and uniform.
9. Continue mixing and begin cooling and at 50°C add simethicone,
wheat germ oil and preservatives. Continue cooling to room
temperature.