SerComm Neutral Brand IP Camera Configuration File ... - Rpra.co.uk
SerComm Neutral Brand IP Camera Configuration File ... - Rpra.co.uk
SerComm Neutral Brand IP Camera Configuration File ... - Rpra.co.uk
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
mask_position1<br />
…<br />
mask_position4<br />
mask_<strong>co</strong>lor1<br />
…<br />
mask_<strong>co</strong>lor4<br />
power_line Power line frequency<br />
60= 60Hz<br />
50= 50Hz<br />
<strong>co</strong>lor Color balance<br />
0= Auto<br />
1= Indoor<br />
2= White light<br />
3= Yellow light<br />
4= Outdoor<br />
5= Black & white<br />
Privacy Mask window position<br />
X1,Y1,X2,Y2<br />
Where<br />
Range: X1 and X2 = 0~639; Y1 and Y2 = 0~479<br />
Privacy Mask window <strong>co</strong>lor<br />
RGB hex <strong>co</strong>lor <strong>co</strong>de, format is RRGGBB<br />
000000 ~ FFFFFF<br />
(Ex. FFFFFF: white; 000000: black; FF0000: red; ...)<br />
exposure Exposure/Brightness (1-7)<br />
sharpness sharpness (1-7)<br />
flip Flip (Rotate)<br />
0=Off<br />
1= On<br />
mirror Mirror<br />
0=Off<br />
1= On<br />
hue Hue (1~7)<br />
saturation Saturation (1~7)<br />
<strong>co</strong>ntrast Contrast (1~7)<br />
dn_filter Set IR filter<br />
0:Day<br />
1:Night<br />
dn_sch Enable Day/Night IR filter<br />
0: Disabled schedule, auto switch<br />
1: Schedule<br />
2: Always enable IR filter, day mode<br />
3. Always disable IR filter, night mode<br />
dn_sch_hr start hour(0-23)<br />
dn_sch_min start minute(0-59)<br />
dn_hrend end hour(0-23)<br />
dn_minend end minute(0-59)<br />
Page 12 of 25<br />
<strong>SerComm</strong> Confidential<br />
night_mode Night mode, OV7670 cmos sensor<br />
0= Keep the Framerate, but won't support the low-light<br />
1= Support the low-light, but will drop the frame rate<br />
1.13. [MPEG4] group<br />
Parameter Values and description<br />
resolution Resolution<br />
1= 160x120<br />
2= 320x240<br />
3= 640x480